New, Low-Viscosity Acid-In-Oil Emulsions Provide High Degree Of Retardation At High Temperature

1974 ◽  
Author(s):  
C.W. Crowe ◽  
B.D. Miller
Keyword(s):  
High Temperature ◽  
Low Viscosity ◽  
Oil Emulsions ◽  
High Degree

REMANIT 4509

Alloy Digest ◽  
1995 ◽  
Vol 44 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Exhaust System ◽  
Heat Treating ◽  
Exhaust Gas ◽  
Gas Purification ◽  
Temperature Performance ◽  
Scale Resistance ◽  
High Degree

Abstract REMANIT 4509 was developed specially for silencers and exhaust gas purification plants. Due to its composition, this steel exhibits scale resistance up to 950 C and a high degree of corrosion resistance to the gases occurring in the exhaust system. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-613. Producer or source: Thyssen Stahl AG.

PEERLESS LCT2

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
High Heat ◽  
High Heat Resistance ◽  
Steel Company ◽  
Temperature Performance ◽  
Crucible Steel ◽  
High Degree

Abstract PEERLESS LCT2 is a hot work steel which possesses high heat resistance and a high degree of working hardness at elevated temperatures. This steel is best applied where hardness and resistance to abrasion are of more importance than toughness. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-140. Producer or source: Crucible Steel Company of America.

Investigating the influence of carbon nanotube on the performance of asphalt binder

2021 ◽  
pp. 147776062110194
Author(s):  
Peerzada Mosir Shah ◽  
Mohammad Shafi Mir
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Storage Condition ◽  
Modified Bitumen ◽  
Creep And Recovery ◽  
Low Viscosity ◽  
Temperature Performance ◽  
Modified Asphalt Binder ◽  
Viscosity Grade ◽  
The Impact

The purpose of this study aims at investigating the impact of multi-walled carbon nanotubes (MWCNT’s) on the properties of low viscosity grade asphalt binder. Asphalt binder with viscosity grade-10 is selected as the control binder and later it is modified with different percentages of MWCNT’s (0.5–2.5%). Penetration, softening point, ductility and rotational viscosity test were employed for evaluating the effect of MWCNT’s on basic physical properties of modified asphalt binder. Dynamic Shear Rheometer (DSR) is used for evaluating the rheological properties of the base and modified bitumen, for both aged and unaged bitumen. Based on the conventional and basic rheological tests, it was seen that the addition of MWCNT’s improved the high-temperature performance of modified bitumen. Multiple Stress Creep and Recovery (MSCR) test results revealed that the addition of MWCNT’s improved the creep and recovery of modified binders for both stress intensities (0.1 kPa and 3.2 kPa) which confirms that the modified binder is more rut resistant. Moreover, it was observed that there was a significant improvement in the aging resistance of the asphalt binder due to addition of MWCNTs. However low temperature performance of MWCNTs was not encouraging. Also, MWCNTs addition to asphalt binder was found to be stable under high-temperature storage condition. Overall, there is a significant amount of improvement using MWCNTs in the base asphalt binder.

scholarly journals Application of Thermal Resistant Gemini Surfactants in Highly Thixotropic Water-in-oil Drilling Fluid System

2019 ◽  
Vol 17 (1) ◽  
pp. 1435-1441
Author(s):  
Yonggui Liu ◽  
Yang Zhang ◽  
Jing Yan ◽  
Tao Song ◽  
Yongjun Xu
Keyword(s):  
Gemini Surfactants ◽  
Drilling Fluid ◽  
Drilling Fluids ◽  
Excellent Thermal Stability ◽  
Oil Drilling ◽  
Low Viscosity ◽  
Emulsion Drops ◽  
Oil Emulsions ◽  
Building Capability ◽  
Liquid Precipitation

AbstractTraditional water-in-oil drilling fluids are limited by their shear thinning behavior. In this article, we propose the synthesis of a thermal resistant quaternary ammonium salt gemini surfactant DQGE-I. This surfactant was synthesized using monomers such as N,N-dimethyl-1,3-propanediamine, organic acids and epichlorohydrin, as well as blocking groups such as N-vinylpyrrolidone (NVP). The prepared surfactant exhibited various advantages over traditional surfactants, including excellent thermal stability, good emulsifying and wetting capability. The use of these surfactants was shown to improve the compactness of emulsifier molecules at the oil/water interface, as well as the overall emulsificaiton effect. Laboratory studies revealed that water-in-oil emulsions prepared using DQGE-I showed high emulsion breaking voltage, low liquid precipitation and small and uniformly distributed emulsion drops. Highly thixotropic water-in-oil drilling fluids based on DQGE-I showed low viscosity, high shear rate and thermal tolerance up to 260oC. Additionally, the proposed fluid was applied in 16 wells (including WS1-H2, GS3 and XS1-H8) in the Daqing Oilfield. Testing showed that DQGE-1 exhibited excellent rheological behavior and wall-building capability. The emulsion breaking voltage exceeded 1500 V, and the yield point/ plastic viscosity ratio exceeded 0.4. The use of this surfactant can help to solve problems such as high formation temperature and poor well wall stability.

scholarly journals Improvement of acid solutions for stimulation of compacted high-temperature carbonate collectors

2021 ◽  
Vol 6 (3(62)) ◽  
pp. 11-14
Author(s):  
Oleh Zimin
Keyword(s):  
Surface Tension ◽  
Acetic Acid ◽  
High Temperature ◽  
Reaction Rate ◽  
Methyl Acetate ◽  
Surface Tension Coefficient ◽  
Gradual Transition ◽  
Acid Solutions ◽  
Hydrocarbon Production ◽  
Low Viscosity

The object of research in this work is the intensification of hydrocarbon production. The most problematic task of the study is the efficiency of intensification of compacted high-temperature carbonate reservoirs. Despite the gradual transition to renewable energy sources, natural gas and oil will play a dominant role in the world's energy balance in the next 20–30 years. Carbonate rocks have significant mining potential, but low filtration properties require intensification to improve reservoir permeability. High temperatures and pressures at great depths require the improvement of existing hydrocarbon production technologies. The most popular method for treating reservoirs containing carbonates is acid treatments in different variations, but for effective treatment it is necessary to achieve deep penetration of the solution into the formation. The study solves the problem of selection of effective carrier liquids for the preparation of acid solutions for the treatment of compacted high-temperature reservoirs with high carbonate content. To ensure quality treatment, acid solutions must have low viscosity and surface tension coefficient, low reaction rate, their chemical properties must ensure the absence of insoluble precipitates in the process of reactions with fluids and rocks, as well as be environmentally friendly. To select the most optimal carrier liquid, experiments were conducted to determine which candidate liquids provide the minimum reaction rate of acidic solutions with carbonates. Based on the analysis of industrial application data and literature sources, water, nephras, methanol, ethyl acetate, and methyl acetate were selected for further research. Widely studied acetic acid was chosen as the basic acid. Studies have shown that methyl acetate has a number of advantages, namely low reaction rate, low viscosity and surface tension coefficient. As well as the possibility of hydrolysis in the formation with the release of acetic acid, which significantly prolongs the reaction time of the solution with the rock and the depth of penetration of the active solution into the formation.

scholarly journals A crystallographic study of crystalline casts and pseudomorphs from the 3.5 Ga Dresser Formation, Pilbara Craton (Australia)

2018 ◽  
Vol 51 (4) ◽  
pp. 1050-1058 ◽  
Author(s):  
Fermin Otálora ◽  
A. Mazurier ◽  
J. M. Garcia-Ruiz ◽  
M. J. Van Kranendonk ◽  
E. Kotopoulou ◽  
...  
Keyword(s):  
High Temperature ◽  
Geological History ◽  
X Ray Diffraction ◽  
Mineral Phase ◽  
X Ray ◽  
Crystallographic Study ◽  
History Of ◽  
Degree Of Confidence ◽  
High Degree ◽  
Pilbara Craton

Crystallography has a long history of providing knowledge and methods for applications in other disciplines. The identification of minerals using X-ray diffraction is one of the most important contributions of crystallography to earth sciences. However, when the crystal itself has been dissolved, replaced or deeply modified during the geological history of the rocks, diffraction information is not available. Instead, the morphology of the crystal cast provides the only crystallographic information on the original mineral phase and the environment of crystal growth. This article reports an investigation of crystal pseudomorphs and crystal casts found in a carbonate-chert facies from the 3.48 Ga-old Dresser Formation (Pilbara Craton, Australia), considered to host some of the oldest remnants of life. A combination of X-ray microtomography, energy-dispersive X-ray spectroscopy and crystallographic methods has been used to reveal the original phases of these Archean pseudomorphs. It is found with a high degree of confidence that the original crystals forming in Archean times were hollow aragonite, the high-temperature polymorphs of calcium carbonate, rather than other possible alternatives such as gypsum (CaSO4·2H20) and nahcolite (NaHCO3). The methodology used is described in detail.

scholarly journals Dendronized fluorosurfactant for highly stable water-in-fluorinated oil emulsions with minimal inter-droplet transfer of small molecules

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Mohammad Suman Chowdhury ◽  
Wenshan Zheng ◽  
Shalini Kumari ◽  
John Heyman ◽  
Xingcai Zhang ◽  
...  
Keyword(s):  
Intramolecular Hydrogen Bonding ◽  
Water Soluble ◽  
Sodium Fluorescein ◽  
Droplet Transfer ◽  
Combination Drug ◽  
Droplet Stability ◽  
Improved Stability ◽  
Oil Emulsions ◽  
Intramolecular Hydrogen ◽  
High Degree

Abstract Fluorosurfactant-stabilized microfluidic droplets are widely used as pico- to nanoliter volume reactors in chemistry and biology. However, current surfactants cannot completely prevent inter-droplet transfer of small organic molecules encapsulated or produced inside the droplets. In addition, the microdroplets typically coalesce at temperatures higher than 80 °C. Therefore, the use of droplet-based platforms for ultrahigh-throughput combination drug screening and polymerase chain reaction (PCR)-based rare mutation detection has been limited. Here, we provide insights into designing surfactants that form robust microdroplets with improved stability and resistance to inter-droplet transfer. We used a panel of dendritic oligo-glycerol-based surfactants to demonstrate that a high degree of inter- and intramolecular hydrogen bonding, as well as the dendritic architecture, contribute to high droplet stability in PCR thermal cycling and minimize inter-droplet transfer of the water-soluble fluorescent dye sodium fluorescein salt and the drug doxycycline.

scholarly journals Sensor-Assisted Assessment of the Tribological Behavioral Patterns of Al–SiCp Composites under Various Environmental Temperature Conditions

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4004
Author(s):  
Manivannan S ◽  
Senthil Kumaran S ◽  
Srinivasan Narayanan ◽  
Kathiravan Srinivasan ◽  
Alex Noel Joseph Raj
Keyword(s):  
High Temperature ◽  
Wear Behavior ◽  
Behavioral Patterns ◽  
Sliding Velocity ◽  
Advanced Composite ◽  
Advanced Composites ◽  
Advanced Composite Materials ◽  
High Degree ◽  
Sliding Distance ◽  
Wear Tests

Currently, the use of sensors and supporting technologies has become indispensable in the assessment of tribological behavioral patterns of composites. Furthermore, the current investigation focused on the assessment of the tribological behavior of the Al–SiCp composite for high-temperature applications. Moreover, the Al–SiCp composite was fabricated by adapting the liquid metallurgy route with varying weight percentages of SiCp (x = 3, 6, and 9). Density, hardness, and high-temperature wear tests were performed to evaluate the hardness and tribological characteristics and properties of modern-day advanced composites. Moreover, the inclusion of SiCp enhanced the advanced composite materials hardness from 60 HV to 110 HV due to a high degree of refinement of the α-phase. Subsequently, the fabricated samples’ wear behavior was assessed by varying the wear parameter viz. the applied load (20 N and 30 N) and sliding distance (250 m, 500 m, 750 m, and 1000 m) with the constant sliding velocity (0.45 m/s) for various temperatures (40 °C, 150 °C, and 250 °C). Moreover, the results revealed that the enhancement in the reinforcement percentage improves the wear resistance. Consequently, the wear rate decreased at 250 °C, possibly owing to the development of the oxide layers. Therefore, the occurrence of delamination and plastic deformation were evidenced in the wear-out surface, thereby depicting the prevalence of delamination and the abrasive wear-mechanism.

PYROLYSIS OF THE LOWER PARAFFINS: II. THE PRODUCTION OF OLEFINES IN BAFFLED QUARTZ TUBES

1933 ◽  
Vol 9 (2) ◽  
pp. 175-196 ◽  
Author(s):  
Adrien Cambron ◽  
Colin H. Bayley
Keyword(s):  
High Temperature ◽  
Turbulent Flow ◽  
Gas Flow ◽  
Side Reactions ◽  
Open Tube ◽  
High Degree ◽  
Quartz Tubes

The pyrolysis of the lower paraffins in externally heated quartz tubes has been studied under conditions of streamline and turbulent flow. It has been found possible to produce a high degree of turbulence in the flow of paraffin gases through tubes heated to a high temperature. It has been shown that when the pyrolysis is carried out under conditions of turbulent flow the yields of olefines obtained at a given temperature are greatly increased over those obtained in an open tube. It is further shown that under conditions of turbulent flow higher rates of conversion of the lower paraffins to olefines are possible since the temperatures at which side reactions begin to be noticeable are considerably higher under the above conditions than when the gas flow is streamline.

scholarly journals The Prospects for Processing Reservoir Oil Sludge into Hydrocarbons by Low-Temperature Hydrogenation in Sorbing Electrochemical Matrices in Comparison with Conventional High-Temperature Hydrocracking

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5362
Author(s):  
Anton Maximov ◽  
Aslan Tsivadze ◽  
Alexander Fridman ◽  
Tatyana Kuchinskaya ◽  
Alexander Novikov ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
High Temperature ◽  
Low Temperature ◽  
Transition Metals ◽  
Mesoporous Structure ◽  
Oil Sludge ◽  
Commercial Catalyst ◽  
Low Viscosity ◽  
Yield Of Light Fractions

In this paper, we developed an effective method for purifying oil sludge using a sorbing electrochemical matrix and assessed the prospects of this method in comparison with conventional hydrocracking. We synthesized Ni-W supported hydrocracking catalysts with different morphology and studied their activity under various conditions, we compared the obtained catalysts with commercial catalyst SGK-5. We demonstrated that the introduction of a secondary mesoporous structure in the catalyst leads to an increase in the yield of light fractions to 52 wt.%. The possibility is demonstrated to obtain hydrocarbons from reservoir oil sludge, dispersed into an aqueous solution of detergent, by the method of low-temperature hydrogenation in sorbing electrochemical matrices. The obtained product was characterized by low viscosity, low content of transition metals (<320 ppm), and sulphur (<260 ppm).

Sign in / Sign up

Export Citation Format

Share Document