scholarly journals The dynamic chirality flips of Skyrmion bubbles

2021 ◽  
Author(s):  
Yuan Yao ◽  
Bei Ding ◽  
Jinjing Liang ◽  
Hang Li ◽  
Xi Shen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Three Dimensional ◽  
Magnetic Domain ◽  
Two Dimensions ◽  
Entire Space ◽  
Transmission Electron ◽  
Fundamental Research ◽  
Lorentz Transmission Electron Microscopy ◽  
Spin Texture ◽  
Magnetic Vectors

Abstract Magnetic skyrmion, a topological magnetic domain with complex non-coplanar spin texture, appears a disk-like structure in two dimensions. Exploring three-dimensional spin texture and related chirality switching has drawn enormous interests from the perspective of fundamental research. Here, the three-dimensional magnetic moment of the skyrmion bubbles in centrosymmetric Mn-Ni-Ga were reconstructed with the vector field tomography approach via Lorentz transmission electron microscopy. The type of the bubbles was determined from investigating the magnetic vectors in entire space. We found that the bubbles switched their chirality easily but still keep the polarity to remain the singularity of the bubbles within the material. Our results offer valuable insights into the fundamental mechanisms underlying the spin chirality flips dynamics of skyrmion bubbles.

scholarly journals Two-dimensional characterization of three-dimensional nanostructures of magnetic bubbles in Fe3Sn2

2020 ◽  
Author(s):  
Jin Tang ◽  
Yaodong Wu ◽  
Lingyao Kong ◽  
Weiwei Wang ◽  
Yutao Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Microscopy Imaging ◽  
Magnetic Structures ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
High Resolution Tem ◽  
Lorentz Transmission Electron Microscopy

Abstract We report differential phase contrast scanning transmission electron microscopy (TEM) of nanoscale magnetic objects in Kagome ferromagnet Fe3Sn2 nanostructures. This technique can directly detect the deflection angle of a focused electron beam, thus allowing clear identification of the real magnetic structures of two magnetic objects including three-ring and complex arch-shaped vortices in Fe3Sn2 by Lorentz transmission electron microscopy imaging. Numerical calculations based on real material-specific parameters well reproduced the experimental results, showing that the magnetic objects can be attributed to integral magnetizations of two types of complex three-dimensional (3D) magnetic bubbles with depth-modulated spin twisting. Magnetic configurations obtained using the high-resolution TEM are generally considered as two-dimensional (2D) magnetic objects previously. Our results imply the importance of the integral magnetizations of underestimated 3D magnetic structures in 2D TEM magnetic characterizations.

scholarly journals Automated, Robotic Preparation of Vitrified Samples for 2D and 3D Cryo Electron Microscopy

2005 ◽  
Vol 13 (6) ◽  
pp. 32-39 ◽  
Author(s):  
Peter. M. Frederik ◽  
Marc M.H. Storms
Keyword(s):  
Electron Microscopy ◽  
Structural Biology ◽  
Three Dimensional ◽  
Nano Technology ◽  
Biochemical Processes ◽  
Cryo Electron Microscopy ◽  
Transmission Electron ◽  
Starting Point ◽  
Fundamental Research ◽  
2D And 3D

Fundamental research within the scope of cell and structural biology as well as nano-technology is increasingly focusing on unraveling interactive biological and biochemical processes and pathways at the macromolecular level. For this, high resolution transmission electron microscopy (TEM) is indispensable. Of paramount importance is the three-dimensional visualization of macromolecular structures and molecular machines in their native hydrated state. Their physical fixation within ultra-thin vitrified ice layers is the crucial starting point.

Scanning and Transmission Microscopy of Nematocyst Batteries in Epitheliomuscular Cells of Hydra

1971 ◽  
Vol 29 ◽  
pp. 410-411 ◽  
Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Osmium Tetroxide ◽  
External Surface ◽  
Three Dimensional ◽  
Surface Structures ◽  
Transmission Microscopy ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Scanning Electron

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).

Simulation of three Dimensional Defect Images in Transmission Electron Microscopy

1976 ◽  
Vol 34 ◽  
pp. 470-471
Author(s):  
W. D. Cooper ◽  
C. S. Hartley ◽  
J. J. Hren
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Crystalline Lattice ◽  
Continuum Models ◽  
Thin Foils ◽  
Transmission Electron ◽  
Microscope Images ◽  
General Computer Program ◽  
General Computer

Interpretation of electron microscope images of crystalline lattice defects can be greatly aided by computer simulation of theoretical contrast from continuum models of such defects in thin foils. Several computer programs exist at the present time, but none are sufficiently general to permit their use as an aid in the identification of the range of defect types encountered in electron microscopy. This paper presents progress in the development of a more general computer program for this purpose which eliminates a number of restrictions contained in other programs. In particular, the program permits a variety of foil geometries and defect types to be simulated.The conventional approximation of non-interacting columns is employed for evaluation of the two-beam dynamical scattering equations by a piecewise solution of the Howie-Whelan equations.

scholarly journals Determination of the 3-D Magnetic Vector Potential using Lorentz Transmission Electron Microscopy

2009 ◽  
Vol 15 (S2) ◽  
pp. 134-135 ◽  
Author(s):  
C Phatak ◽  
E Humphrey ◽  
M DeGraef ◽  
A Petford-Long
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Vector Potential ◽  
Magnetic Vector Potential ◽  
Magnetic Vector ◽  
Transmission Electron ◽  
Lorentz Transmission Electron Microscopy

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009

scholarly journals Measuring the Autocorrelation Function of Nanoscale Three-Dimensional Density Distribution in Individual Cells Using Scanning Transmission Electron Microscopy, Atomic Force Microscopy, and a New Deconvolution Algorithm

2017 ◽  
Vol 23 (3) ◽  
pp. 661-667 ◽  
Author(s):  
Yue Li ◽  
Di Zhang ◽  
Ilker Capoglu ◽  
Karl A. Hujsak ◽  
Dhwanil Damania ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Density Distribution ◽  
Scanning Transmission Electron Microscopy ◽  
Mass Density ◽  
Three Dimensional ◽  
Force Microscopy ◽  
Statistical Measures ◽  
Atomic Force ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractEssentially all biological processes are highly dependent on the nanoscale architecture of the cellular components where these processes take place. Statistical measures, such as the autocorrelation function (ACF) of the three-dimensional (3D) mass–density distribution, are widely used to characterize cellular nanostructure. However, conventional methods of reconstruction of the deterministic 3D mass–density distribution, from which these statistical measures can be calculated, have been inadequate for thick biological structures, such as whole cells, due to the conflict between the need for nanoscale resolution and its inverse relationship with thickness after conventional tomographic reconstruction. To tackle the problem, we have developed a robust method to calculate the ACF of the 3D mass–density distribution without tomography. Assuming the biological mass distribution is isotropic, our method allows for accurate statistical characterization of the 3D mass–density distribution by ACF with two data sets: a single projection image by scanning transmission electron microscopy and a thickness map by atomic force microscopy. Here we present validation of the ACF reconstruction algorithm, as well as its application to calculate the statistics of the 3D distribution of mass–density in a region containing the nucleus of an entire mammalian cell. This method may provide important insights into architectural changes that accompany cellular processes.

scholarly journals Correlation between structure and mass distribution of the nuclear pore complex and of distinct pore complex components.

1990 ◽  
Vol 110 (4) ◽  
pp. 883-894 ◽  
Author(s):  
R Reichelt ◽  
A Holzenburg ◽  
E L Buhle ◽  
M Jarnik ◽  
A Engel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nuclear Envelope ◽  
Three Dimensional ◽  
Structural Features ◽  
Nuclear Pore ◽  
Xenopus Laevis Oocyte ◽  
Three Dimensional Model ◽  
Transmission Electron ◽  
Freeze Dried

Nuclear pore complexes (NPCs) prepared from Xenopus laevis oocyte nuclear envelopes were studied in "intact" form (i.e., unexposed to detergent) and after detergent treatment by a combination of conventional transmission electron microscopy (CTEM) and quantitative scanning transmission electron microscopy (STEM). In correlation-averaged CTEM pictures of negatively stained intact NPCs and of distinct NPC components (i.e., "rings," "spoke" complexes, and "plug-spoke" complexes), several fine structural features arranged with octagonal symmetry about a central axis could reproducibly be identified. STEM micrographs of unstained/freeze-dried intact NPCs as well as of their components yielded comparable but less distinct features. Mass determination by STEM revealed the following molecular masses: intact NPC with plug, 124 +/- 11 MD; intact NPC without plug, 112 +/- 11 MD; heavy ring, 32 +/- 5 MD; light ring, 21 +/- 4 MD; plug-spoke complex, 66 +/- 8 MD; and spoke complex, 52 +/- 3 MD. Based on these combined CTEM and STEM data, a three-dimensional model of the NPC exhibiting eightfold centrosymmetry about an axis perpendicular to the plane of the nuclear envelope but asymmetric along this axis is proposed. This structural polarity of the NPC across the nuclear envelope is in accord with its well-documented functional polarity facilitating mediated nucleocytoplasmic exchange of molecules and particles.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Sign in / Sign up

Export Citation Format

Share Document