scholarly journals All-Dielectric Meta-optics for High-Efficiency Independent Amplitude and Phase Manipulation

2021 ◽  
Author(s):  
Brian Raeker ◽  
Hanyu Zheng ◽  
You Zhou ◽  
Ivan Kravchenko ◽  
Jason Valentine ◽  
...  
Keyword(s):  
High Performance ◽  
High Efficiency ◽  
Three Dimensional ◽  
Beam Forming ◽  
Optical Components ◽  
Independent Amplitude ◽  
Overall Efficiency ◽  
Holographic Displays ◽  
Polarization Of Light ◽  
Complex Valued

Abstract Metasurfaces, composed of subwavelength scattering elements, have demonstrated remarkable control over the transmitted amplitude, phase, and polarization of light. However, manipulating the amplitude upon transmission has required loss if a single metasurface is used. Here, we describe high-efficiency independent manipulation of the amplitude and phase of a beam using two lossless phase-only metasurfaces separated by a distance. With this configuration, we experimentally demonstrate optical components such as combined beam-forming and splitting devices, as well as those for forming complex-valued, three-dimensional holograms. The compound meta-optic platform provides a promising approach for achieving high performance optical holographic displays and compact optical components, while exhibiting a high overall efficiency.

Theoretical design of three-dimensional non-fullerene acceptor materials based on an arylenediimide unit towards high efficiency organic solar cells

2017 ◽  
Vol 41 (10) ◽  
pp. 3857-3864 ◽  
Author(s):  
Qing-Qing Pan ◽  
Shuang-Bao Li ◽  
Yong Wu ◽  
Ji Zhang ◽  
Hai-Bin Li ◽  
...  
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
High Performance ◽  
High Efficiency ◽  
Three Dimensional ◽  
Tddft Calculations ◽  
Theoretical Design ◽  
Organic Acceptor ◽  
Dft And Tddft Calculations

DFT and TDDFT calculations were performed to search for high-performance non-fullerene organic acceptor materials in organic solar cells.

scholarly journals The Flexiscope: a low cost, flexible, convertible and modular microscope with automated scanning and micromanipulation

2020 ◽  
Vol 7 (3) ◽  
pp. 191949 ◽  
Author(s):  
Amy Courtney ◽  
Luke M. Alvey ◽  
George O. T. Merces ◽  
Niamh Burke ◽  
Mark Pickering
Keyword(s):  
Experimental Design ◽  
High Performance ◽  
Low Cost ◽  
Three Dimensional ◽  
Cost Savings ◽  
Fluorescent Imaging ◽  
Multiple Roles ◽  
Flexible Work ◽  
Optical Components ◽  
Automated Scanning

With technologies rapidly evolving, many research institutions are now opting to invest in costly, high-quality, specialized microscopes which are shared by many researchers. As a consequence, the user may not have the ability to adapt a microscope to their specific needs and limitations in experimental design are introduced. A flexible work-horse microscopy system is a valuable tool in any laboratory to meet the diverse needs of a research team and promote innovation in experimental design. We have developed the Flexiscope; a multi-functional, adaptable, efficient and high-performance microscopy/electrophysiology system for everyday applications in a neurobiology laboratory. The core optical components are relatively constant in the three configurations described here: an upright configuration, an inverted configuration and an upright/electrophysiology configuration. We have provided a comprehensive description of the Flexiscope. We show that this method is capable of oblique infrared illumination imaging, multi-channel fluorescent imaging and automated three-dimensional scanning of larger specimens. Image quality is conserved across the three configurations of the microscope, and conversion between configurations is possible quickly and easily, while the motion control system can be repurposed to allow sub-micrometre computer-controlled micromanipulation. The Flexiscope provides similar performance and usability to commercially available systems. However, as it can be easily reconfigured for multiple roles, it can remove the need to purchase multiple microscopes, giving significant cost savings. The modular reconfigurable nature allows the user to customize the system to their specific needs and adapt/upgrade the system as challenges arise, without requiring specialized technical skills.

scholarly journals High-Performance Laterally Oriented Nanowire Solar Cells with Ag Gratings

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2807
Author(s):  
Yangan Zhang ◽  
Yao Li ◽  
Xueguang Yuan ◽  
Xin Yan ◽  
Xia Zhang
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
High Efficiency ◽  
Three Dimensional ◽  
Polarized Light ◽  
Small Diameter ◽  
Grating Period ◽  
Cutoff Wavelength ◽  
Carrier Recombination ◽  
Grating Diffraction

A laterally oriented GaAs p-i-n nanowire solar cell with Ag gratings is proposed and studied via coupled three-dimensional optoelectronic simulations. The results show that the gratings significantly enhance the absorption of nanowire for both TM and TE polarized light due to the combined effect of grating diffraction, excitation of plasmon polaritons, and suppression of carrier recombination. At an optimal grating period, the absorption at 650–800 nm, which is an absorption trough for pure nanowire, is substantially enhanced, raising the conversion efficiency from 8.7% to 14.7%. Moreover, the gratings enhance the weak absorption at long wavelengths and extend the absorption cutoff wavelength for ultrathin nanowires, yielding a remarkable efficiency of 13.3% for the NW with a small diameter of 90 nm, 2.6 times that without gratings. This work may pave the way toward the development of ultrathin high-efficiency nanoscale solar cells.

scholarly journals Dielectric Metalens: Properties and Three-Dimensional Imaging Applications

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4584
Author(s):  
Sun-Je Kim ◽  
Changhyun Kim ◽  
Youngjin Kim ◽  
Jinsoo Jeong ◽  
Seokho Choi ◽  
...  
Keyword(s):  
High Efficiency ◽  
Three Dimensional ◽  
Optical Systems ◽  
Functional Improvement ◽  
Depth Information ◽  
Optical Components ◽  
Three Dimensional Imaging ◽  
Wide Range ◽  
Optical Dielectric ◽  
Optical Focusing

Recently, optical dielectric metasurfaces, ultrathin optical skins with densely arranged dielectric nanoantennas, have arisen as next-generation technologies with merits for miniaturization and functional improvement of conventional optical components. In particular, dielectric metalenses capable of optical focusing and imaging have attracted enormous attention from academic and industrial communities of optics. They can offer cutting-edge lensing functions owing to arbitrary wavefront encoding, polarization tunability, high efficiency, large diffraction angle, strong dispersion, and novel ultracompact integration methods. Based on the properties, dielectric metalenses have been applied to numerous three-dimensional imaging applications including wearable augmented or virtual reality displays with depth information, and optical sensing of three-dimensional position of object and various light properties. In this paper, we introduce the properties of optical dielectric metalenses, and review the working principles and recent advances in three-dimensional imaging applications based on them. The authors envision that the dielectric metalens and metasurface technologies could make breakthroughs for a wide range of compact optical systems for three-dimensional display and sensing.

scholarly journals Spray Pyrolyzed TiO2 Embedded Multi-Layer Front Contact Design for High-Efficiency Perovskite Solar Cells

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Md. Shahiduzzaman ◽  
Mohammad Ismail Hossain ◽  
Sem Visal ◽  
Tetsuya Kaneko ◽  
Wayesh Qarony ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
High Efficiency ◽  
Photovoltaic Performance ◽  
Perovskite Solar Cells ◽  
Three Dimensional ◽  
Cost Effective ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Single Junction

AbstractThe photovoltaic performance of perovskite solar cells (PSCs) can be improved by utilizing efficient front contact. However, it has always been a significant challenge for fabricating high-quality, scalable, controllable, and cost-effective front contact. This study proposes a realistic multi-layer front contact design to realize efficient single-junction PSCs and perovskite/perovskite tandem solar cells (TSCs). As a critical part of the front contact, we prepared a highly compact titanium oxide (TiO2) film by industrially viable Spray Pyrolysis Deposition (SPD), which acts as a potential electron transport layer (ETL) for the fabrication of PSCs. Optimization and reproducibility of the TiO2 ETL were discreetly investigated while fabricating a set of planar PSCs. As the front contact has a significant influence on the optoelectronic properties of PSCs, hence, we investigated the optics and electrical effects of PSCs by three-dimensional (3D) finite-difference time-domain (FDTD) and finite element method (FEM) rigorous simulations. The investigation allows us to compare experimental results with the outcome from simulations. Furthermore, an optimized single-junction PSC is designed to enhance the energy conversion efficiency (ECE) by > 30% compared to the planar reference PSC. Finally, the study has been progressed to the realization of all-perovskite TSC that can reach the ECE, exceeding 30%. Detailed guidance for the completion of high-performance PSCs is provided.

scholarly journals Three-dimensional open nano-netcage electrocatalysts for efficient pH-universal overall water splitting

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Zewen Zhuang ◽  
Yu Wang ◽  
Cong-Qiao Xu ◽  
Shoujie Liu ◽  
Chen Chen ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
High Efficiency ◽  
Sea Water ◽  
Three Dimensional ◽  
Water Electrolysis ◽  
High Exposure ◽  
Electrochemical Testing ◽  
Highly Active ◽  
Universal Applicability

Abstract High-efficiency water electrolysis is the key to sustainable energy. Here we report a highly active and durable RuIrOx (x ≥ 0) nano-netcage catalyst formed during electrochemical testing by in-situ etching to remove amphoteric ZnO from RuIrZnOx hollow nanobox. The dispersing-etching-holing strategy endowed the porous nano-netcage with a high exposure of active sites as well as a three-dimensional accessibility for substrate molecules, thereby drastically boosting the electrochemical surface area (ECSA). The nano-netcage catalyst achieved not only ultralow overpotentials at 10 mA cm−2 for hydrogen evolution reaction (HER; 12 mV, pH = 0; 13 mV, pH = 14), but also high-performance overall water electrolysis over a broad pH range (0 ~ 14), with a potential of mere 1.45 V (pH = 0) or 1.47 V (pH = 14) at 10 mA cm−2. With this universal applicability of our electrocatalyst, a variety of readily available electrolytes (even including waste water and sea water) could potentially be directly used for hydrogen production.

scholarly journals A Review of Electrochemical Cells with Geometrically Well-defined Interfaces for Solid Oxide Fuel Cell Anodes

Ceramist ◽  
2021 ◽  
Vol 24 (4) ◽  
pp. 344-355
Author(s):  
Yoonseok Choi
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
High Performance ◽  
Rational Design ◽  
High Efficiency ◽  
Three Dimensional ◽  
Cell Types ◽  
Electrode Reaction ◽  
Solid Oxide ◽  
Oxide Fuel

A solid oxide fuel cell (SOFC) is a high-temperature (above 750℃) energy conversion device that generates electricity with high efficiency and low CO2 emission. It is essential to develop high-activity electrodes for its commercialization by lowering the operating temperature to below 700℃. Understanding the electrode reaction kinetics can provide fundamental insights for the rational design of high-performance electrodes. However, the three-dimensional porous microstructures of the SOFC electrodes make it difficult to analyze the reaction processes precisely. To overcome this issue associated with the conventional electrodes, the model electrodes with geometrically well-defined interfaces have been widely employed. In this paper, focusing on the SOFC anodes, the fabrication techniques, cell types, analysis tools, and the modeling studies in the literature will be reviewed.

Improved 3-D reconstruction using stereo computer graphics and multiple tilt EM images

1995 ◽  
Vol 53 ◽  
pp. 630-631
Author(s):  
Lee D. Peachey ◽  
Lou Fodor ◽  
John C. Haselgrove ◽  
Stanley M. Dunn ◽  
Junqing Huang
Keyword(s):  
Computer Graphics ◽  
High Performance ◽  
Transverse Section ◽  
Three Dimensional ◽  
Stereo Pair ◽  
3D Reconstructions ◽  
Video Cameras ◽  
Biological Objects ◽  
Microscope Images ◽  
High Performance Computer

Stereo pairs of electron microscope images provide valuable visual impressions of the three-dimensional nature of specimens, including biological objects. Beyond this one seeks quantitatively accurate models and measurements of the three dimensional positions and sizes of structures in the specimen. In our laboratory, we have sought to combine high resolution video cameras with high performance computer graphics systems to improve both the ease of building 3D reconstructions and the accuracy of 3D measurements, by using multiple tilt images of the same specimen tilted over a wider range of angles than can be viewed stereoscopically. Ultimately we also wish to automate the reconstruction and measurement process, and have initiated work in that direction.Figure 1 is a stereo pair of 400 kV images from a 1 micrometer thick transverse section of frog skeletal muscle stained with the Golgi stain. This stain selectively increases the density of the transverse tubular network in these muscle cells, and it is this network that we reconstruct in this example.

High-Performance Hardware Interpolation Architecture for High Efficiency Video Coding Decoder

2016 ◽  
Vol 11 (9) ◽  
pp. 764
Author(s):  
Lella Aicha Ayadi ◽  
Nihel Neji ◽  
Hassen Loukil ◽  
Mouhamed Ali Ben Ayed ◽  
Nouri Masmoudi
Keyword(s):  
Video Coding ◽  
High Performance ◽  
High Efficiency ◽  
High Efficiency Video Coding

Finite Element Modeling for Steel Cord Analysis in Radial Tires

2013 ◽  
Vol 41 (1) ◽  
pp. 60-79 ◽  
Author(s):  
Wei Yintao ◽  
Luo Yiwen ◽  
Miao Yiming ◽  
Chai Delong ◽  
Feng Xijin
Keyword(s):  
Finite Element ◽  
High Efficiency ◽  
Force Measurement ◽  
Three Dimensional ◽  
Local Stress ◽  
Tension Force ◽  
Center Line ◽  
Element Analysis ◽  
Design Variables ◽  
Steel Cord

ABSTRACT: This article focuses on steel cord deformation and force investigation within heavy-duty radial tires. Typical bending deformation and tension force distributions of steel reinforcement within a truck bus radial (TBR) tire have been obtained, and they provide useful input for the local scale modeling of the steel cord. The three-dimensional carpet plots of the cord force distribution within a TBR tire are presented. The carcass-bending curvature is derived from the deformation of the carcass center line. A high-efficiency modeling approach for layered multistrand cord structures has been developed that uses cord design variables such as lay angle, lay length, and radius of the strand center line as input. Several types of steel cord have been modeled using the developed method as an example. The pure tension for two cords and the combined tension bending under various loading conditions relevant to tire deformation have been simulated by a finite element analysis (FEA). Good agreement has been found between experimental and FEA-determined tension force-displacement curves, and the characteristic structural and plastic deformation phases have been revealed by the FE simulation. Furthermore, some interesting local stress and deformation patterns under combined tension and bending are found that have not been previously reported. In addition, an experimental cord force measurement approach is included in this article.

Sign in / Sign up

Export Citation Format

Share Document