scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose: Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks.Methods : Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution.Results: The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply.Conclusion: We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose: Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks.Methods: Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results: The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion: We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason A. Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks. Methods Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 min for the Ultimaker S5 printer and 150 min for the CR-10. Four hundred seventy-five mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution.

scholarly journals 3D printed mask extenders: supplement to isolation masks to relieve posterior auricular discomfort

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks. Methods Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

On the Application of Biomimicked Composites in 3D Printed Artifacts

2017 ◽  
Author(s):  
Seyed M. Allameh ◽  
Roger Miller
Keyword(s):  
3D Printing ◽  
Fracture Energy ◽  
3D Printer ◽  
Works Of Art ◽  
3D Printers ◽  
3D Printed ◽  
Series Of Experiments ◽  
Architectural Structures ◽  
Soft Polymer ◽  
The Right

Application of 3D printing to works of art is not new. However, with the advent of larger and more affordable 3D printers, it is possible to fabricate works of art including statues, sculptures, and architectural structures from biomimicked composites. Made of hard ceramic and soft polymer with or without reinforcement, these composites have shown to be much tougher than their monolithic counterparts. The use of biomimicking will increase the durability and strength of such artifacts. In this study, a newly developed architectural 3D printer is used to create works of art using concrete, with and without reinforcement fibers. The challenge that face creating tough artistic display structures include durability, hardness and resistance to impact. To determine the right combination of hard ceramic and soft polymer, a series of experiments were conducted. These included the fabrication of biomimicked composites with different materials and testing them for fracture energy as well as maximum strength. Earlier published works demonstrate the effect of various parameters such as type of ceramic layer, layering, fiber reinforcement type, fiber length, and fiber loading. In this paper, the effect of hard layer thickness and the type of polymer on the mechanical properties of the biomimicked composites was investigated. Preliminary results show the highest fracture energy for composites made with concrete bonding adhesive (CBA) and Quikrete™ concrete, with a spacing of 5mm. The application of 3D printing to the educational activities of a museum in Newport KY will be explained and its implication in relation with civic engagement activities of Northern Kentucky University will be elucidated.

Designing Inclusion: Using 3D Printing to Maximize Adapted Physical Education Participation

2021 ◽  
pp. 004005992110101
Author(s):  
A. Chloe Simpson ◽  
Andrea Ruth Taliaferro
Keyword(s):  
3D Printing ◽  
Student Success ◽  
Assistive Technology ◽  
Adapted Physical Education ◽  
Physical Educators ◽  
Related Service ◽  
3D Printers ◽  
3D Printed ◽  
Education Participation ◽  
Individual Design

While assistive technology is often suggested as a way to increase, maintain, or improve functional ability for individuals with disabilities within physical activity (PA) settings, cost and availability of such items are often noted as barriers. In recent years, 3D printing has become available to the general public through the adoption of 3D printers in schools, libraries, and universities. Through individual design and rapid prototyping, 3D printing can support physical educators in accommodating student need for assistive technology through a multitude of modification possibilities. This article will highlight the capacity for 3D printed assistive technology within educational settings, and will illustrate how teachers, APE specialists, and other related service personnel can utilize this technology to support student success in PE and PA settings. This article will also assist practitioners with locating, uploading, and utilizing existing collections of 3D assistive technology models from open-source websites, such as Thingiverse.

scholarly journals Evaluation of the Ability to Accurately Produce Angular Details by 3D Printing of Plastic Parts

Machines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 150
Author(s):  
Andrei Marius Mihalache ◽  
Gheorghe Nagîț ◽  
Laurențiu Slătineanu ◽  
Adelina Hrițuc ◽  
Angelos Markopoulos ◽  
...  
Keyword(s):  
3D Printing ◽  
Point Of View ◽  
Vertex Angle ◽  
Function Type ◽  
Constant Height ◽  
3D Printers ◽  
3D Printed ◽  
Mathematical Processing ◽  
Plastic Parts

3D printing is a process that has become widely used in recent years, allowing the production of parts with relatively complicated shapes from metallic and non-metallic materials. In some cases, it is challenging to evaluate the ability of 3D printers to make fine details of parts. For such an assessment, the printing of samples showing intersections of surfaces with low angle values was considered. An experimental plan was designed and materialized to highlight the influence of different factors, such as the thickness of the deposited material layer, the printing speed, the cooling and filling conditions of the 3D-printed part, and the thickness of the sample. Samples using areas in the form of isosceles triangles with constant height or bases with the same length, respectively, were used. The mathematical processing of the experimental results allowed the determination of empirical mathematical models of the power-function type. It allowed the detection of both the direction of actions and the intensity of the influence exerted by the input factors. It is concluded that the strongest influence on the printer’s ability to produce fine detail, from the point of view addressed in the paper, is exerted by the vertex angle, whose reduction leads to a decrease in printing accuracy.

Fused Filament Fabrication 3D Printed Polylactic Acid Electroosmotic Pumps

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Liang Wu ◽  
Stephen Beirne ◽  
Joan-Marc Cabot Canyelles ◽  
Brett Paull ◽  
Gordon G. Wallace ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Polylactic Acid ◽  
Fused Filament Fabrication ◽  
Flexible Approach ◽  
Electroosmotic Pump ◽  
3D Printed ◽  
Electroosmotic Pumps

Additive manufacturing (3D printing) offers a flexible approach for the production of bespoke microfluidic structures such as the electroosmotic pump. Here a readily accessible fused filament fabrication (FFF) 3D printing...

scholarly journals Supercritical Impregnation of PLA Filaments with Mango Leaf Extract to Manufacture Functionalized Biomedical Devices by 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2125
Author(s):  
José María Rosales ◽  
Cristina Cejudo ◽  
Lidia Verano ◽  
Lourdes Casas ◽  
Casimiro Mantell ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
3D Printing ◽  
Polylactic Acid ◽  
Leaf Extract ◽  
Three Dimensional ◽  
3D Printer ◽  
Pharmacological Properties ◽  
Bioactive Properties ◽  
Supercritical Impregnation ◽  
Mango Leaves

Polylactic Acid (PLA) filaments impregnated with ethanolic mango leaves extract (MLE) with pharmacological properties were obtained by supercritical impregnation. The effects of pressure, temperature and amount of extract on the response variables, i.e., swelling, extract loading and bioactivity of the PLA filaments, were determined. The analysis of the filaments biocapacities revealed that impregnated PLA filaments showed 11.07% antidenaturant capacity and 88.13% antioxidant activity, which after a 9-day incubation shifted to 30.10% and 9.90%, respectively. Subsequently, the same tests were conducted on printed samples. Before their incubation, the printed samples showed 79.09% antioxidant activity and no antidenaturant capacity was detected. However, after their incubation, the antioxidant activity went down to only 2.50%, while the antidenaturant capacity raised up to 23.50%. The persistence of the bioactive properties after printing opens the possibility of using the functionalized PLA filaments as the feed for a three-dimensional (3D) printer.

scholarly journals Foundation Piles—A New Feature for Concrete 3D Printers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2545
Author(s):  
Marcin Hoffmann ◽  
Krzysztof Żarkiewicz ◽  
Adam Zieliński ◽  
Szymon Skibicki ◽  
Łukasz Marchewka
Keyword(s):  
3D Printing ◽  
Rapid Development ◽  
Construction Materials ◽  
Shallow Foundation ◽  
Soil Reinforcement ◽  
3D Printer ◽  
Permanent Formwork ◽  
3D Printers ◽  
New Feature ◽  
The Cost

Foundation piles that are made by concrete 3D printers constitute a new alternative way of founding buildings constructed using incremental technology. We are currently observing very rapid development of incremental technology for the construction industry. The systems that are used for 3D printing with the application of construction materials make it possible to form permanent formwork for strip foundations, construct load-bearing walls and partition walls, and prefabricate elements, such as stairs, lintels, and ceilings. 3D printing systems do not offer soil reinforcement by making piles. The paper presents the possibility of making concrete foundation piles in laboratory conditions using a concrete 3D printer. The paper shows the tools and procedure for pile pumping. An experiment for measuring pile bearing capacity is described and an example of a pile deployment model under a foundation is described. The results of the tests and analytical calculations have shown that the displacement piles demonstrate less settlement when compared to the analysed shallow foundation. The authors indicate that it is possible to replace the shallow foundation with a series of piles combined with a printed wall without locally widening it. This type of foundation can be used for the foundation of low-rise buildings, such as detached houses. Estimated calculations have shown that the possibility of making foundation piles by a 3D printer will reduce the cost of making foundations by shortening the time of execution of works and reducing the consumption of construction materials.

scholarly journals 2019 Novel Coronavirus Vaccination among Post-graduate Residents and Fellows

2021 ◽  
Vol 12 ◽  
pp. 215013272110229
Author(s):  
Mostafa Abohelwa ◽  
Mohamed Elmassry ◽  
John Abdelmalek ◽  
Drew Payne ◽  
Kenneth Nugent
Keyword(s):  
Side Effects ◽  
Healthcare Workers ◽  
Healthcare Providers ◽  
The United States ◽  
Health Sciences ◽  
Institutional Review Board ◽  
Institutional Review ◽  
Texas Tech University ◽  
Novel Coronavirus ◽  
United States Healthcare

Background Coronavirus-2 (COVID-19) has caused a worldwide pandemic since December 2019. Since then, clinical trials with vaccines have been started and completed, and at present, 3 COVID-19 vaccines have been approved for use in the United States. Healthcare providers were among the first to get vaccinated, but the precise attitudes of healthcare workers toward vaccination are uncertain. Objective To understand residents and fellows’ attitudes toward vaccination and record any side effects after vaccination. Methods We conducted an anonymous survey that was open from 3-1-2021 to 3-12-2021 using distribution lists from the Graduate Medical Education office on the Lubbock campus of the Texas Tech University Health Sciences Center after getting approval from the Institutional Review Board (L21-088). Results Eighty-one residents and fellows (26.6% out of 304) responded to our survey. Among those who responded, 63 (77.8 %) were between 25 and 35 years old, and 41 (50.6%) were males. Seventy-seven (95.1%) received the vaccine (Pfizer-BioNTech), 78 (96.3%) reported that they supported vaccination, and 3 (3.7%) reported that they did not want vaccination. Eight members (9.8%) had tested positive for COVID-19 infection before vaccination, but only 1 (1.23%) had tested positive for COVID-19 antibodies. All residents and fellows reported side effects after the vaccination, including pain at the injection site (77; 100%), local redness (9; 11.6%), local swelling (13; 16.8%), fever (25; 32.5%), fatigue (25; 32.5%), chills (34; 44.1 %), headache (38; 49.4%). Conclusions Most medical trainees have a high interest in COVID-19 vaccination; however, a few reported that they did not want vaccination.

Sign in / Sign up

Export Citation Format

Share Document