scholarly journals Sustainable Valorization of Olive Pomace Waste to Renewable Biofuels, Biomaterials and Biochemicals Via Pyrolysis Process: Experimental and Numerical Investigation

Author(s):  
Mohamed Hechmi Aissaoui ◽  
Aïda Ben Hassen Trabelsi ◽  
Gmar Bensidhom ◽  
Selim Ceylan ◽  
James.J Leahy ◽  
...  

Abstract This work demonstrates, experimentally and numerically, the potential of Olive Pomace Waste (OPW) to produce renewable biofuels (pyrolytic oil and gas), bio-chemicals (tars as source of bioactive molecules) and bio-fertilizers (chars) through slow pyrolysis. Experimental pyrolysis runs were conducted at 500, 600 and 700°C as final pyrolysis temperature, 15, 20 and 25°C/min as heating rate and 1h as residence time, in a fixed bed pyrolyzer. In the optimum pyrolysis conditions (600°C and 15°C/min), 33 wt.% of oil, 30.00 wt.% of char and 37 wt.% of gas were produced. Recovered pyrolytic oil presents good energy value (HHV between 15.96 and 20.94 MJ/kg) with a great bioactive potential. The released permanent gases show an interesting energy content (LHV up to 11 MJ/Kg) which emphasizes their application in a gas engine to provide renewable electricity in rural olive groves area. The recovered OPW biochar presents a high carbon (C 72.54 wt.%) and nutrients contents (up to 8.42 mg/g of Ca, up to 8.69 mg/g of K and up to 2.02 % of total N) which make it suitable for soil amendment and for long-term carbon sequestration. Kinetic study of OPW pyrolysis, performed using the Distributed Activation Energy Model (DAEM), gives an activation energy values ranging from 121.6 to 151.6 kJ/mol. The investigation of the OPW thermal behavior and reactivity under pyrolysis conditions is useful approach to design and operate slow pyrolysis process at commercial scale, which could be useful by farmers for OPW in olive fields.

2015 ◽  
Vol 787 ◽  
pp. 67-71
Author(s):  
R.M. Alagu ◽  
E. Ganapathy Sundaram

Pyrolysis process in a fixed bed reactor was performed to derive pyrolytic oil from groundnut shell. Experiments were conducted with different operating parameters to establish optimum conditions with respect to maximum pyrolytic oil yield. Pyrolysis process was carried out without catalyst (thermal pyrolysis) and with catalyst (catalytic pyrolysis). The Kaolin is used as a catalyst for this study. The maximum pyrolytic oil yield (39%wt) was obtained at 450°C temperature for 1.18- 2.36 mm of particle size and heating rate of 60°C/min. The properties of pyrolytic oil obtained by thermal and catalytic pyrolysis were characterized through Fourier Transform Infrared Spectroscopy (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS) techniques to identify the functional groups and chemical components present in the pyrolytic oil. The study found that catalytic pyrolysis produce more pyrolytic oil yield and improve the pH value, viscosity and calorific value of the pyrolytic oil as compared to thermal pyrolysis.


Author(s):  
Marcos Antônio Klunk ◽  
Sudipta Dasgupta ◽  
Mohuli Das

Biomass is the term attributed to any renewable resource derived from organic matter that can be used in energy production. Agricultural production generates residues that are of great importance for their energy use, of which sugar cane, eucalyptus, and rice. Various residues are generated from rice cultivation, among which the rice husk and rice straw are the most important. Several thermal conversion technologies have been developed for the use of biomass in industry. Pyrolysis has been notable for its ability to produce biofuels at different stages of aggregation. The slow pyrolysis of biomass has been proposed as a pretreatment method to improve the physical-chemical characteristics of rice straw. In this process is produced, mainly, a solid called biochar, which has a higher energy content when compared to the biomass of origin. This study investigated the slow pyrolysis of rice straw at 300 - 700°C for the purpose of obtaining biochar, bio-oil, and gases for energy purposes. The experimental results show that pyrolysis temperature has important roles in yield product. The highest biochar yield was observed at a temperature of 300°C with 49.91 wt%. This represents 47% more when compared to yield at 700°C (33.87 wt.%). This behavior is linked to the proximate analysis results for fixed carbon 26.01 wt.% at 300°C. The high pH of the biochar was attributed to the presence of alkali metals, according to XRF. Thermal decomposition of the biomass resulting in a gradual increase of bio-oil (16.81 - 34.70 wt.%) and gas (6.53 - 18.05 wt.%) on a wet basis. Thus, in the dry base parameter, the bio-oil increases from 19.22 - 30.6 wt.% and the gases at 9.42-20.19 wt.%. Drying of the raw material showed, by the results, a significant increase in the co-products formed. As a consequence, we have a more efficient energy process.


2021 ◽  
Vol 39 (2) ◽  
pp. 493-502
Author(s):  
I Made Rajendra ◽  
I Nyoman Suprapta Winaya ◽  
Ainul Ghurri ◽  
I Ketut Gede Wirawan

The purpose of bed material in the pyrolysis process is to reduce the need for heat energy. In this study, three kinds of sands were observed as bed material, namely iron oxide, zeolite, and ZSM-5 in the slow fixed bed pyrolysis of sunan candlenut oilcake (SCO). To evaluate the activation energy, pyrolytic kinetics were carried out using the iso-conversional method with the KAS, OFW, and Friedman models. They involved calculating the data from the thermogravimetric analysis (TGA) test at heating rates of 5, 10, 20 and 40 K/min. Furthermore, the results showed that SCO had a high volatile content of 82.80%, alongside a calorific value of 26.93 MJ/kg. The calculation results showed that the activation energy of SCO was 169.140 kJ/mol which decreased 1.45% in the KAS model, and 1.92% in the OFW model with the addition of ZSM-5 bed material. Therefore, the use of ZSM-5 bed material in the pyrolysis process reduces the activation energy.


2020 ◽  
Vol 49 (2) ◽  
pp. 23-29
Author(s):  
Lorelis Milian-Luperón ◽  
Mónica Hernández-Rodríguez ◽  
José Falcón-Hernández ◽  
Alexis Otero-Calvis

The agricultural economic policy of Cuba pretends to triplicate the crops of coffee and cocoa by 2021, a measure which will bring about both an increase in biomass waste and the need to find a proper method for its disposal. Slow pyrolysis process can transform lignocellulosic waste into added value products as biochar, bio-oil and gas. The present research evaluated the yield and the theoretical potential energy of co-products (biochar, bio-oil, and gas) from coffee and cocoa seed husks using the pyrolysis process as a source of friendly and renewable energy. Results indicated that coffee husks are more suitable for the production of gas with a yield of 40.4%, while cocoa seed husks are better suited for the production of bio-oil, with a yield of 37.4%. For 2021 the theoretical energy potential estimated is 8291 MWh, equivalent to 716000 kg for the coffee husks, and 1384 MWh equivalent to 121000 kg for the cocoa seed husks. The bio-char characterization indicated high contents of carbon, calcium, potassium, nitrogen, and oxygen, which makes it a suitable candidate for being used as a soil amendment.  The conversion of coffee and cocoa seed husks into added value products through slow pyrolysis process will help clean the environment, decrease the greenhouse effect, and will aid farmers in the rural populations by providing them with an additional source of income.


Author(s):  
Marcos Antônio KLUNK ◽  
Sudipta DASGUPTA ◽  
Mohuli DAS

Biomass is the term attributed to any renewable resource derived from organic matter that can be used in energy production. Agricultural production generates residues that are of great importance for their energy use, of which sugar cane, eucalyptus, and rice. Various residues are generated from rice cultivation, among which the rice husk and rice straw are the most important. Several thermal conversion technologies have been developed for the use of biomass in industry. Pyrolysis has been notable for its ability to produce biofuels at different stages of aggregation. The slow pyrolysis of biomass has been proposed as a pretreatment method to improve the physical-chemical characteristics of rice straw. In this process is produced, mainly, a solid called biochar, which has a higher energy content when compared to the biomass of origin. This study investigated the slow pyrolysis of rice straw at 300 - 700°C for the purpose of obtaining biochar, bio-oil, and gases for energy purposes. The experimental results show that pyrolysis temperature has important roles in yield product. The highest biochar yield was observed at a temperature of 300°C with 49.91 wt%. This represents 47% more when compared to yield at 700°C (33.87 wt.%). This behavior is linked to the proximate analysis results for fixed carbon 26.01 wt.% at 300°C. The high pH of the biochar was attributed to the presence of alkali metals, according to XRF. Thermal decomposition of the biomass resulting in a gradual increase of bio-oil (16.81 - 34.70 wt.%) and gas (6.53 - 18.05 wt.%) on a wet basis. Thus, in the dry base parameter, the bio-oil increases from 19.22 - 30.6 wt.% and the gases at 9.42-20.19 wt.%. Drying of the raw material showed, by the results, a significant increase in the co-products.


2020 ◽  
Vol 132 ◽  
pp. 105412 ◽  
Author(s):  
Fábio Roberto Vieira ◽  
Carlos M. Romero Luna ◽  
Gretta L.A.F. Arce ◽  
Ivonete Ávila

2014 ◽  
Vol 625 ◽  
pp. 604-607 ◽  
Author(s):  
Salman Raza Naqvi ◽  
Yoshimitsu Uemura ◽  
Noridah Binti Osman ◽  
Suzana Yusup ◽  
Mohd Fadhil Nuruddin

Rice husk is considered as a massive agricultural lignocellulosic biomass residue for the production of bio-based fuels and chemicals products. The purpose of this study is to investigate the physiochemical properties of the pyrolysis-oil derived from wet and dried rice husk fast pyrolysis process. The experiments were performed in a drop type fixed-bed pyrolyzer at the pyrolysis temperature of 350 to 600 °C. The products, char, pyrolysis-oil and gas, yield are investigated. The pyrolysis-oil derived from dried rice husk contained higher Carbon and Hydrogen and less oxygen contents than the pyrolysis-oil obtained from wet rice husk. FT-IR results showed the oxygenated compounds present in both pyrolysis-oil. The pyrolysis oil from dried rice husk has higher concentration of hydrocarbons as compared to wet rice husk pyrolysis-oil. The dried rice husk pyrolysis-oil produced more phenols and less carboxylic acid as compared to wet rice husk pyrolysis-oil at 500 °C. More volatile released in dried rice husk conversion produced more volatile compounds. These findings suggest that the original moisture present in biomass samples is the major influencing parameter on the thermal degradation of biomass during fast pyrolysis process.


2021 ◽  
Vol 11 (10) ◽  
pp. 4374
Author(s):  
Waldemar Ścierski

The most advantageous way of managing plastics, according to circular economy assumptions, is recycling, i.e., reusing them. There are three types of plastics recycling: mechanical, chemical and energy recycling. The products of the pyrolysis process can be used for both chemical and energy recycling. Possibilities of further use of pyrolysis products depend on their physicochemical parameters. Getting to know these parameters was the aim of the research, some of which are presented in this article. The paper presents the research position for conducting the pyrolysis process and discusses the results of research on pyrolysis products of waste plastics. The process was conducted to obtain the temperature of 425 °C in the pyrolytic chamber. Such a value was chosen on the basis of my own previous research and literature analysis. The focus was on the migration of sulfur and nitrogen, as in some processes these substances may pose a certain problem. Studies have shown high possibilities of migration of these elements in products of pyrolysis process. It has been shown that the migration of sulfur is similar in the case of homogeneous and mixed waste plastics—it immobilizes mainly in pyrolytic oil. Different results were obtained for nitrogen. For homogeneous plastics, nitrogen immobilizes mainly in char and oil, whereas for mixed plastics, nitrogen immobilizes in pyrolytic gas.


Heliyon ◽  
2021 ◽  
pp. e07669
Author(s):  
Jonas Kristanto ◽  
Muhammad Mufti Azis ◽  
Suryo Purwono

Sign in / Sign up

Export Citation Format

Share Document