The study of the fractional composition and mechanical properties of bleached chemical thermomechanical pulp and compositions with waste-cellulose fiber
Проведено исследование фракционного состава и физико-механических свойств беленой химико-термомеханической массы (БХТММ) из древесины тополя и её влияния на механические показатели бумаги в композиции с вторичным волокном, полученным из макулатуры марки МС-5Б. Новизной и особенностью рассматриваемой БХТММ является ее получение по экструзивной технологии, принципиально отличающейся от классической операции предварительной обработки древесины в виде щепы и превращения ее в волокноподобную костру для последующих ступеней размола. Исследованная БХТММ из древесины тополя при степени помола не ниже 40 оШР имеет физико- механические показатели, сравнимые с вторичным волокном, полученным из макулатуры марки МС-5Б. Ее добавки в волокнистую композицию бумаги для гофрирования и картона-лайнера для плоских слоев гофрированного картона целесообразны в интервале 30–50%. Небеленая ХТММ, получаемая по экструзивной технологии, в качестве первичного высококачественного целлюлозного волокнистого полуфабриката может эффективно использоваться в производстве гофрированной тары. Экструзивная технология является перспективной для переработки неликвидной древесины и отходов лесопромышленных предприятий и рекомендуется для использования в России. In this paper, the study of the fractional composition and physico-mechanical properties of bleached chemical-thermomechanical pulp (BCTMM) from poplar wood and the effect on the mechanic properties of paper from composites with recycled fiber from MS-5B paper was conducted. The novelty and feature of BCTMM is its production using extrusion technology, which is fundamentally different from the classical operations of pretreatment of wood in the form of chips and turning it into a fiber-like scutch for subsequent grinding steps. The studied BCTMM from wood of poplar with a degree of grinding not lower than 40 оSR has physical and mechanical properties comparable to the secondary fiber of MS-5B waste paper. Its additives to the fibrous composition of paper for corrugation and cardboard-liner for flat layers of corrugated cardboard are expedient in the range of 30–50%. Unbleached CTMM obtained by extrusion technology, as a primary high-quality cellulosic fiber semi- finished product can be effectively used in the manufacture of corrugated packaging. Extrusive technology is promising for the processing of illiquid wood and waste of timber industry enterprises and is recommended for use in Russia.