scholarly journals Distribution of corn plants in a pneumatic system with different vacuum pressure adjustments and seed sieves

2020 ◽  
pp. 1568-1574
Author(s):  
José Carlos Cazarotto Madaloz ◽  
Alcir José Modolo ◽  
Juan Paulo Xavier de Freitas ◽  
José Ricardo da Rocha Campos ◽  
Murilo Mesquita Baesso ◽  
...  
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Vacuum Pressure ◽  
Corn Seed ◽  
Individual Productivity ◽  
Main Plot ◽  
Corn Plants ◽  
Normal Spacing ◽  
Precision Planting ◽  
Corn Hybrid

The use of seeders with pneumatic distribution systems is increasingly demanding for plantation of corn crop. Knowledge about the operation and adjustments of the components of agricultural machines is fundamental to increase the good distribution of plants and to ensure higher productivity. The main goal of this research was to evaluate the influence of the size of the corn seed sieve under different vacuum pressure regulations on a pneumatic distribution system, to understand the longitudinal uniformity of the plants, as well as the final and individual productivity per plant. The vSet® (Precision Planting®) pneumatic distribution system equipped with 4 corn seed sieves (C1, C4, R1, and R4) subjected to 4 different vacuum pressure adjustments (7, 12, 17 and 22 in H2O-1) was applied as treatments on corn hybrid 30F53VYH. The design used was that of randomized blocks, with subdivided plots and 4 replications. The main plot presented the vacuum pressures and the subplots presented the sieves, each composed of two sowing lines of 20 m in length. The results showed that low vacuum pressure resulted in increased unevenness between corn spacings and consequently lower yield. Smaller sieves showed less gaps and higher percentages of normal spacing. The larger sieves showed higher standard deviation and more gaps. Regular and uneven gaps provided a higher number of grains per row, higher number of grains per corn spike and a higher grain yield per corn spike.

Unit Template Based Control of PV-DSTATCOM

2020 ◽  
Vol 13 (1) ◽  
pp. 36-42
Author(s):  
Gunjan Varshney ◽  
Durg S. Chauhan ◽  
Madhukar P. Dave ◽  
Nitin
Keyword(s):  
Power Quality ◽  
Power Factor ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Phase Distribution ◽  
Voltage Regulation ◽  
Photovoltaic Array ◽  
Quality Issues ◽  
Static Compensator

Background: In modern electrical power distribution systems, Power Quality has become an important concern due to the escalating use of automatic, microprocessor and microcontroller based end user applications. Methods: In this paper, power quality improvement has done using Photovoltaic based Distribution Static Compensator (PV-DSTATCOM). Complete simulation modelling and control of Photovoltaic based Distribution Static Compensator have been provided in the presented paper. In this configuration, DSTATCOM is fed by solar photovoltaic array and PV module is also helpful to maintain the DC link voltage. The switching of PV-STATCOM is controlled by Unit template based control theory. Results: The performance of PV-DSTATCOM has been evaluated for Unity Power Factor (UPF) and AC Voltage Control (ACVC) modes. Here, for studying the power quality issues three-phase distribution system is considered and results have been verified through simulation based on MATLAB software. Conclusion: Different power quality issues and their improvement are studied and presented here for harmonic reduction, DC voltage regulation and power factor correction.

scholarly journals A Game-Theoretic Loss Allocation Approach in Power Distribution Systems with High Penetration of Distributed Generations

Mathematics ◽  
2018 ◽  
Vol 6 (9) ◽  
pp. 158
Author(s):  
Farzaneh Pourahmadi ◽  
Payman Dehghanian
Keyword(s):  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Power Distribution Systems ◽  
Loss Allocation ◽  
Distributed Generators ◽  
High Penetration ◽  
Game Theoretic ◽  
Allocation Approach

Allocation of the power losses to distributed generators and consumers has been a challenging concern for decades in restructured power systems. This paper proposes a promising approach for loss allocation in power distribution systems based on a cooperative concept of game-theory, named Shapley Value allocation. The proposed solution is a generic approach, applicable to both radial and meshed distribution systems as well as those with high penetration of renewables and DG units. With several different methods for distribution system loss allocation, the suggested method has been shown to be a straight-forward and efficient criterion for performance comparisons. The suggested loss allocation approach is numerically investigated, the results of which are presented for two distribution systems and its performance is compared with those obtained by other methodologies.

scholarly journals Application of genetic programming to modeling pipe failures in water distribution systems

2010 ◽  
Vol 13 (3) ◽  
pp. 419-428 ◽  
Author(s):  
Qiang Xu ◽  
Qiuwen Chen ◽  
Weifeng Li
Keyword(s):  
Genetic Programming ◽  
Distribution System ◽  
Distribution Systems ◽  
Water Distribution ◽  
Pipe Failure ◽  
Beijing City ◽  
Failure Data ◽  
Processing Strategies ◽  
Gis Data ◽  
Failure Models

The water loss from a water distribution system is a serious problem for many cities, which incurs enormous economic and social loss. However, the economic and human resource costs to exactly locate the leakage are extraordinarily high. Thus, reliable and robust pipe failure models are demanded to assess a pipe's propensity to fail. Beijing City was selected as the case study area and the pipe failure data for 19 years (1987–2005) were analyzed. Three different kinds of methods were applied to build pipe failure models. First, a statistical model was built, which discovered that the ages of leakage pipes followed the Weibull distribution. Then, two other models were developed using genetic programming (GP) with different data pre-processing strategies. The three models were compared thereafter and the best model was applied to assess the criticality of all the pipe segments of the entire water supply network in Beijing City based on GIS data.

scholarly journals Protection of Sensitive Loads in Distribution Systems Using a BSFCL-DVR System

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1615
Author(s):  
Mehdi Firouzi ◽  
Saleh Mobayen ◽  
Hossein Shahbabaei Kartijkolaie ◽  
Mojtaba Nasiri ◽  
Chih-Chiang Chen
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Fault Current ◽  
Dynamic Voltage Restorer ◽  
Voltage Quality ◽  
Voltage Restorer ◽  
Point Of Common Coupling ◽  
Dynamic Voltage ◽  
Bridge Type ◽  
In The Beginning

In this paper, an incorporated bridge-type superconducting fault current limiter (BSFCL) and Dynamic Voltage Restorer (DVR) is presented to improve the voltage quality and limiting fault current problems in distribution systems. In order to achieve these capabilities, the BSFCL and DVR are integrated through a common DC link as a BSFCL-DVR system. The FCL and DVR ports of the BSFCL-DVR system are located in the beginning and end of the sensitive loads’ feeder integrated to the point of common coupling (PCC) in the distribution system. At first, the principle operation of the BSFCL-DVR is discussed. Then, a control system for the BSFCL-DVR system is designed to enhance the voltage quality and limit the fault current. Eventually, the efficiency of the BSFCL-DVR system is verified through the PSCAD/EMTDC simulation.

scholarly journals Electric Vehicles in Jordan: Challenges and Limitations

2021 ◽  
Vol 13 (6) ◽  
pp. 3199
Author(s):  
Laith Shalalfeh ◽  
Ashraf AlShalalfeh ◽  
Khaled Alkaradsheh ◽  
Mahmoud Alhamarneh ◽  
Ahmad Bashaireh
Keyword(s):  
Electric Vehicles ◽  
Distribution System ◽  
Distribution Systems ◽  
Environmental Benefits ◽  
System Stability ◽  
Loading Conditions ◽  
Stability Margins ◽  
High Penetration ◽  
Node Distribution ◽  
The Impact

An increasing number of electric vehicles (EVs) are replacing gasoline vehicles in the automobile market due to the economic and environmental benefits. The high penetration of EVs is one of the main challenges in the future smart grid. As a result of EV charging, an excessive overloading is expected in different elements of the power system, especially at the distribution level. In this paper, we evaluate the impact of EVs on the distribution system under three loading conditions (light, intermediate, and full). For each case, we estimate the maximum number of EVs that can be charged simultaneously before reaching different system limitations, including the undervoltage, overcurrent, and transformer capacity limit. Finally, we use the 19-node distribution system to study these limitations under different loading conditions. The 19-node system is one of the typical distribution systems in Jordan. Our work estimates the upper limit of the possible EV penetration before reaching the system stability margins.

scholarly journals A Head Formulation for the Steady-State Analysis of Water Distribution Systems Using an Explicit and Exact Expression of the Colebrook–White Equation

Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1163
Author(s):  
Mengning Qiu ◽  
Avi Ostfeld
Keyword(s):  
Steady State ◽  
Distribution System ◽  
Distribution Systems ◽  
Water Distribution ◽  
Solution Method ◽  
Water Distribution System ◽  
Academic Research ◽  
Exact Expression ◽  
Contamination Source

Steady-state demand-driven water distribution system (WDS) solution is the bedrock for much research conducted in the field related to WDSs. WDSs are modeled using the Darcy–Weisbach equation with the Swamee–Jain equation. However, the Swamee–Jain equation approximates the Colebrook–White equation, errors of which are within 1% for ϵ/D∈[10−6,10−2] and Re∈[5000,108]. A formulation is presented for the solution of WDSs using the Colebrook–White equation. The correctness and efficacy of the head formulation have been demonstrated by applying it to six WDSs with the number of pipes ranges from 454 to 157,044 and the number of nodes ranges from 443 to 150,630. The addition of a physically and fundamentally more accurate WDS solution method can improve the quality of the results achieved in both academic research and industrial application, such as contamination source identification, water hammer analysis, WDS network calibration, sensor placement, and least-cost design and operation of WDSs.

scholarly journals A new meta-heuristic pathfinder algorithm for solving optimal allocation of solar photovoltaic system in multi-lateral distribution system for improving resilience

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Varaprasad Janamala
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Optimal Allocation ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Voltage Profile ◽  
Pv System ◽  
Solar Photovoltaic System ◽  
The Impact

AbstractA new meta-heuristic Pathfinder Algorithm (PFA) is adopted in this paper for optimal allocation and simultaneous integration of a solar photovoltaic system among multi-laterals, called interline-photovoltaic (I-PV) system. At first, the performance of PFA is evaluated by solving the optimal allocation of distribution generation problem in IEEE 33- and 69-bus systems for loss minimization. The obtained results show that the performance of proposed PFA is superior to PSO, TLBO, CSA, and GOA and other approaches cited in literature. The comparison of different performance measures of 50 independent trail runs predominantly shows the effectiveness of PFA and its efficiency for global optima. Subsequently, PFA is implemented for determining the optimal I-PV configuration considering the resilience without compromising the various operational and radiality constraints. Different case studies are simulated and the impact of the I-PV system is analyzed in terms of voltage profile and voltage stability. The proposed optimal I-PV configuration resulted in loss reduction of 77.87% and 98.33% in IEEE 33- and 69-bus systems, respectively. Further, the reduced average voltage deviation index and increased voltage stability index result in an improved voltage profile and enhanced voltage stability margin in radial distribution systems and its suitability for practical applications.

scholarly journals Cyber—Physical Attack Detection in Water Distribution Systems with Temporal Graph Convolutional Neural Networks

Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1247
Author(s):  
Lydia Tsiami ◽  
Christos Makropoulos
Keyword(s):  
Neural Networks ◽  
Distribution System ◽  
Distribution Systems ◽  
Water Distribution ◽  
Attack Detection ◽  
Convolutional Network ◽  
Irreversible Damage ◽  
Physical Attack ◽  
Temporal Graph ◽  
Graph Neural Networks

Prompt detection of cyber–physical attacks (CPAs) on a water distribution system (WDS) is critical to avoid irreversible damage to the network infrastructure and disruption of water services. However, the complex interdependencies of the water network’s components make CPA detection challenging. To better capture the spatiotemporal dimensions of these interdependencies, we represented the WDS as a mathematical graph and approached the problem by utilizing graph neural networks. We presented an online, one-stage, prediction-based algorithm that implements the temporal graph convolutional network and makes use of the Mahalanobis distance. The algorithm exhibited strong detection performance and was capable of localizing the targeted network components for several benchmark attacks. We suggested that an important property of the proposed algorithm was its explainability, which allowed the extraction of useful information about how the model works and as such it is a step towards the creation of trustworthy AI algorithms for water applications. Additional insights into metrics commonly used to rank algorithm performance were also presented and discussed.

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

Sign in / Sign up

Export Citation Format

Share Document