scholarly journals Characteristics of adsorption kinetics and isotherms of Cu(II) by sediment under different hydrodynamic of the Ganjiang river, China

2021 ◽  
Author(s):  
Xianluo Shi ◽  
Wei Zhang ◽  
Baotong Li
Keyword(s):  
Heavy Metals ◽  
Shear Stress ◽  
Adsorption Isotherms ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Lake Basin ◽  
Hydrodynamic Conditions ◽  
Adsorption Sites ◽  
Pseudo Second Order ◽  
Kinetics And Isotherms

Abstract Discharges from industrial and agricultural processes into water bodies can result in the accumulation of heavy metals such as Cu(II) in the sediment via various physical and chemical interactions. While there are many studies of the adsorption of heavy metals by sediment, few have considered the effects of hydrodynamic conditions. Here, the adsorption of Cu(II) by sediments under different hydrodynamic conditions was studied using a particle entrainment simulator. The sediment samples were obtained from the Poyang Lake basin in China. Models describing pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion kinetics and the Langmuir, Freundlich, Temkin and Dubin Radushkevich adsorption isotherms were used to evaluate the adsorption of Cu(II) by the sediments under different hydrodynamic conditions. The results showed that adsorption equilibrium for Cu(II) by the sediment was attained within 4 hours and increased with increasing shear stress; the kinetics were consistent with pseudo-second-order and Elovich models, indicating that chemical processes were involved in adsorption; the adsorption isotherms could be described by the Langmuir and Freundlich models. Changes in the sediment shear stress had little effect on the maximum adsorption capacity and values ranged from 0.9425 to 1.0634 mg/g. The results indicated that the adsorption sites for Cu(II) in soil were heterogeneous.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

scholarly journals A Study of The Equilibrium, Kinetics, and Thermodynamics of Malachite Green Dye Adsorption Onto Lignin

2021 ◽  
Author(s):  
Vani Gandham ◽  
UMA Addepally ◽  
Bala Narsaiah T
Keyword(s):  
Malachite Green ◽  
Group Analysis ◽  
Dye Adsorption ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adequate Treatment ◽  
Pseudo Second Order ◽  
Kinetics And Isotherms

Abstract Malachite Green (MG), a cationic synthetic dye is considered hazardous when discharged into the water bodies without any adequate treatment. It can affect the multiple segments of the environment leading to irreversible persistent changes. So, there is a need for remediation with cost-effective method to remove dyes from effluents. Adsorption is one such technique to remove dyes from wastewater and is effective and economical. The present study describes the removal of MG cationic dye from wastewater using eco-friendly and biodegradable lignin extracted from hydrothermally treated rice straw by adsorption process. Functional group analysis and morphological characterisation was done to the extracted lignin after quantification. The maximum percent removal of MG 92 ± 0.2 % was observed from a series of batch experiments at optimum process parameters of: contact time 80 min, initial dye concentration 50 ppm, lignin dosage 0.25g, pH 7, temperature 300c and with 100 rpm agitation speed. The adsorption kinetics and isotherms were determined for the experimental data using four kinetic models (pseudo-first-order, second order, pseudo-second-order and intra-particle diffusion model) and two isotherm models (Langmuir and Freundlich). The results suggested that the kinetics data fit to the pseudo-second-order kinetic model with the maximum adsorption capacity 36.7 mg/g and the two isotherm models were applicable for the adsorption of MG onto the lignin. Additionally, the thermodynamic parameters ΔSo, ΔHo and ΔGo were evaluated. Therefore, lignin which is an environmental friendly and low cost carbon material that can be used as an adsorbent for dye removal.

scholarly journals Uptake of phenol from aqueous solution by burned water hyacinth

2008 ◽  
Vol 10 (2) ◽  
pp. 43-49 ◽  
Author(s):  
Mohammed Uddin ◽  
Mohammed Islam ◽  
Mohammed Islam ◽  
Mohammed Abedin
Keyword(s):  
Aqueous Solution ◽  
Water Hyacinth ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Experimental Conditions ◽  
Adsorption Models ◽  
Adsorption Sites ◽  
Pseudo Second Order

Uptake of phenol from aqueous solution by burned water hyacinth The potential of burned water hyacinth (BWH) for phenol adsorption from aqueous solution was studied. Batch kinetic and isotherm studies were carried out under varying experimental conditions of contact time, phenol concentration, adsorbent dosage and pH. The pH at the point of zero charge (pHPZC) of the adsorbent was determined by the titration method and the value of 8.8 ± 0.2 was obtained. The FTIR of the adsorbent was carried out in order to find the potential adsorption sites for the interaction with phenol molecules. The Freundlich and Langmuir adsorption models were used for the mathematical description of adsorption equilibrium and it was found that the experimental data fitted very well to the Langmuir model. Maximum adsorption capacity of the adsorbent was found to be 30.49 mg/g. Batch adsorption models, based on the assumption of the pseudo-first-order and pseudo-second-order models, were applied to examine the kinetics of the adsorption. The results showed that kinetic data closely followed the pseudo-second-order model.

scholarly journals A Study on Adsorption of Heavy Metals with Zeolite and FeS Media

2020 ◽  
Vol 42 (7) ◽  
pp. 349-359
Author(s):  
Gimin Lee ◽  
Gyuri Kim ◽  
Sungkyu Choi ◽  
Tae-jin Lee
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Reaction Kinetics ◽  
Adsorption Capacity ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Adsorption Characteristics ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Kinetics Of

Objectives:Adsorption characteristics in aqueous solution were investigated to effectively remove heavy metals by the crystallization of FeS and reaction kinetics were analyzed to compare with heavy metal adsorption characteristics of zeolite.Methods:The adsorption characteristics of each media were analyzed using Langmuir adsorption isotherm, and the adsorption reaction kinetics of heavy metals (Pb, Cu, Zn) on zeolite and FeS media were analyzed by a pseudo-first or pseudo-second order reaction kinetics.Results and Discussion:The maximum adsorption capacity of zeolite was highest in Pb, and the adsorption preference was in the order of Pb>Cu>Zn. In the case of FeS media, Cu was found to have a higher adsorption capacity than Pb or Zn, and the adsorption preference was observed to be Cu>Pb>Zn. It was found that the adsorption mechanism is based on chemical adsorption (chemisorption) because adsorption of each heavy metal onto zeolite or FeS media is more suitable for pseudo-second order kinetics.Conclusions:It was found that the removal of heavy metals through FeS media has a different pattern from zeolite, and when comparing the adsorption capacity of each media, it was found that FeS media is more effective for Zn or Cu except Pb.

scholarly journals Determination of Kinetic Parameters in the Biosorption of Chromium (VI) in Aqueous Solution

2020 ◽  
Vol 16 (31) ◽  
pp. 129-143
Author(s):  
Candelaria Tejada-Tovar ◽  
Angel Villabona-Ortíz ◽  
Rodrigo Ortega-Toro
Keyword(s):  
New Technologies ◽  
Theoretical Models ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Adsorption Sites ◽  
Chromium Vi ◽  
Batch System ◽  
Pseudo Second Order ◽  
Kinetics Of

he contamination of aquatic bodies by heavy metals is a growing environmental problem, making more critical the study and development of new technologies and materials that can be used for the removal of this type of pollutants. Thus, adsorption arises using residual materials as a sustainable alternative for the solution to this problem. In the present study, the use of plantain peels in the adsorption of Cr (VI) in a batch system is proposed, establishing the kinetics of the process at different temperature conditions, particle size and amount of adsorbent. The fit of the data was done using the theoretical models of pseudo-first-order, pseudo-second-order and Elovich. From the data, it is established that the pseudo-second-order and Elovich models show a better adjustment, so that the adsorption in the material occurs on two adsorption sites and that such process is related to chemical adsorption. The maximum adsorption capacity of Cr (VI) was found at a condition of 0.0306 g, 0.6775 mm and 55°C at a time of 420 min establishing the efficient use of plantain peels for the removal of the ion metallic in the studio.

scholarly journals Kinetic Study of the Bioadsorption of Methylene Blue on the Surface of the Biomass Obtained from the Algae D. antarctica

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jhonatan R. Guarín ◽  
Juan Carlos Moreno-Pirajan ◽  
Liliana Giraldo
Keyword(s):  
Methylene Blue ◽  
Kinetic Study ◽  
Adsorption Capacity ◽  
Scientific Community ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Total Elimination ◽  
Purification Of Water

Currently, there is a great pollution of water by the dyes; due to this, several studies have been carried out to remove these compounds. However, the total elimination of these pollutants from the aquatic effluents has represented a great challenge for the scientific community, for which it is necessary to carry out investigations that allow the purification of water. In this work, we studied the bioadsorption of methylene blue on the surface of the biomass obtained from the algae D. antarctica. This material was characterized by SEM and FTIR. To the data obtained in the biosorption experiments, different models of biosorption and kinetics were applied, finding that the best fit to the obtained data is given by applying the pseudo-second-order models and the Toth model, respectively. It was also determined that the maximum adsorption capacity of MB on the surface of the biomass is 702.9 mg/g, which shows that this material has great properties as a bioadsorbent.

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

scholarly journals Sythesis of Nano Zerovalent Iron Supported Sawdust (NZVI/SD) and Its Application for Removal of Arsenic (III) from Aqueous Solution

2020 ◽  
pp. 1-12
Author(s):  
Tasrina R. Choudhury ◽  
Snahasish Bhowmik ◽  
M. S. Rahman ◽  
Mithun R. Nath ◽  
F. N. Jahan ◽  
...  
Keyword(s):  
Ph Value ◽  
Ferrous Sulphate ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Zerovalent Iron ◽  
Isotherm Model ◽  
Order Kinetic ◽  
Adsorption Sites ◽  
Adsorption Data ◽  
Pseudo Second Order

Sawdust supported nano-zerovalent (NZVI/SD) iron was synthesized by treating sawdust with ferrous sulphate followed by reduction with NaBH4. The NZVI/SD was characterized by SEM, XRD, FTIR and Chemical method. Adsorption of As (III) by NZVI/SD was investigated and the maximum uptake of As (III) was found at pH value of 7.74 and equilibrium time of 3 hrs. The adsorption isotherm modelling revealed that the equilibrium adsorption data were better fitted with the Langmuir isotherm model compared with the Freundlich Isotherm model. This study revealed that the maximum As (III) ions adsorption capacity was found to be 12.66 mg/g for using NZVI/SD adsorbent. However, the kinetics data were tested by pseudo-first-order and pseudo-second-order kinetic models; and it was observed that the adsorption data could be well fitted with pseudo-second-order kinetics for As (III) adsorption onto NZVI/SD depending on both adsorbate concentration and adsorption sites. The result of this study suggested that NZVI/SD could be developed as a prominent environment-friendly adsorbent for the removal of As (III) ions from aqueous systems.

scholarly journals Investigation of competitive adsorption and desorption of heavy metals from aqueous solution using raw rock: Characterization kinetic, isotherm, and thermodynamic

2021 ◽  
Vol 348 ◽  
pp. 01016
Author(s):  
Rajaa Bassam ◽  
Marouane El Alouani ◽  
Nabila Jarmouni ◽  
Jabrane Maissara ◽  
Mohammed El Mahi Chbihi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Langmuir Model ◽  
Second Order ◽  
Isotherm Models ◽  
Desorption Process ◽  
Pseudo Second Order ◽  
Rock Characterization ◽  
Metals Adsorption

Heavy metals are the most dangerous inorganic pollutants Due to their bioaccumulation and their nonbiodegradability, for this, several studies have focused on the recovery of these metals from water using different techniques. In this context, our study consists of evaluating an efficient and eco-friendly pathway of competitive recovery of heavy metals (Cd, Cr and As) from aqueous solutions by adsorption using raw rock. This adsorbent was characterized before and after the adsorption process by several techniques. The multi-metals adsorption process in the batch mode was undertaken to evaluate the effect of adsorbent mass, contact time, pH, Temperature, and initial heavy metals concentration. The kinetic data were analyzed using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetic models. According to the modeling of the experimental results, the adsorption kinetics of heavy metals were adapted to the pseudo-second-order model. The adsorption isotherms were evaluated by the Langmuir and Freundlich isotherm models. The experimental isotherm data of heavy metals were better fitted with the Langmuir model rather than Freundlich isotherm models. The maximum experimental adsorption capacities (Qmax) predicted by the Langmuir model are 15.23 mg/g for Cd (II), 17.54 mg/g for Cr (VI) and 16.36 mg/g for As (III). The values of thermodynamic parameters revealed that the heavy metals adsorption was exothermic, favorable, and spontaneous in nature. The desorption process of heavy metals showed that this raw rock had excellent recycling capacity. Based on the results, these untreated clays can be used as inexpensive and environmentally friendly adsorbents to treat water contaminated by heavy metals.

Mathematical Modelling for Copper and Lead Adsorption on Coffee Grounds

2017 ◽  
Author(s):  
Jurgita Seniūnaitė ◽  
Rasa Vaiškūnaitė ◽  
Kristina Bazienė
Keyword(s):  
Heavy Metals ◽  
Mathematical Modelling ◽  
Adsorption Kinetics ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Coffee Grounds ◽  
Pseudo Second Order

Research studies on the adsorption kinetics are conducted in order to determine the absorption time of heavy metals on coffee grounds from liquid. The models of adsorption kinetics and adsorption diffusion are based on mathe-matical models (Cho et al. 2005). The adsorption kinetics can provide information on the mechanisms occurring be-tween adsorbates and adsorbents and give an understanding of the adsorption process. In the mathematical modelling of processes, Lagergren’s pseudo-first- and pseudo-second-order kinetics and the intra-particle diffusion models are usually applied. The mathematical modelling has shown that the kinetics of the adsorption process of heavy metals (copper (Cu) and lead (Pb)) is more appropriately described by the Lagergren’s pseudo-second-order kinetic model. The kinetic constants (k2Cu = 0.117; k2Pb = 0,037 min−1) and the sorption process speed (k2qeCu = 0.0058–0.4975; k2qePb = 0.021–0.1661 mg/g per min) were calculated. After completing the mathematical modelling it was calculated that the Langmuir isotherm better reflects the sorption processes of copper (Cu) (R2 = 0.950), whilst the Freundlich isotherm – the sorption processes of lead (Pb) (R2 = 0.925). The difference between the mathematically modelled and experimen-tally obtained sorption capacities for removal of heavy metals on coffee grounds from aqueous solutions is 0.059–0.164 mg/l for copper and 0.004–0.285 mg/l for lead. Residual concentrations of metals in a solution showed difference of 1.01 and 0.96 mg/l, respectively.

Sign in / Sign up

Export Citation Format

Share Document