Heavy Metal Removal in the Presence of Colloid-Stabilizing Organic Material and Complexing Agents

1986 ◽  
Vol 18 (1) ◽  
pp. 19-29 ◽  
Author(s):  
I. Licskó ◽  
I. Takács
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Colloidal Dispersion ◽  
Laboratory Model ◽  
Complexing Agents ◽  
Stabilizing Agents ◽  
Removal Of Heavy Metals ◽  
Alkaline Conditions ◽  
The Stability

It has been established in laboratory model experiments that the removal of dissolved heavyimetals from wastewaters is rendered more difficult in the presence of colloid-stabilizing agents. This unfavourable effect can be eliminated by the addition of Mg2+ ions and the adjustment to a fairly high pH. By increasing the concentration of Mg2+ ions, the pH necessary for destroying the stability of colloidal dispersion can be lowered. These findings also apply to the combined removal of different heavy metals (Cu, Zn, Cr(III), Ni, Cd). In alkaline conditions, in the presence of ammonium salts, some heavy metals (Cu, Zn, Ni) form high stability amine complexes. A higher pH is necessary for the breakdown of these complexes and the satisfactory removal of heavy metals.

Understanding the factors influencing the removal of heavy metals in urban stormwater runoff

2016 ◽  
Vol 73 (12) ◽  
pp. 2921-2928 ◽  
Author(s):  
Marla C. Maniquiz-Redillas ◽  
Lee-Hyung Kim
Keyword(s):  
Heavy Metals ◽  
Fine Particles ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Stormwater Runoff ◽  
Winter Season ◽  
Filter Media ◽  
Factors Influencing ◽  
Removal Of Heavy Metals

Abstract In this research, an infiltration trench equipped with an extensive pretreatment and filter bed consisting of woodchip, sand and gravel was utilized as a low impact development technique to manage stormwater runoff from a highly impervious road with particular emphasis on heavy metal removal. Findings revealed that the major factors influencing the removal of heavy metals were the concentration of the particulate matters and heavy metals in runoff, runoff volume and flow rates. The reduction of heavy metals was enhanced by sedimentation of particulates through pretreatment. Fine particles (<2 mm) had the most significant amount of heavy metals, thus, enhanced adsorption and filtration using various filter media were important design considerations. Sediment was most highly attached on the surface area of woodchip than to other filter media like sand, gravel and geotextile. It is suggested that maintenance must be performed after the end of the winter season wherein high sediment rate was observed to maintain the efficiency of the treatment system.

Application of Immobilized Fungi Phanerochaete chrysosporium in Removal of Heavy-Metals from Wastewater

2013 ◽  
Vol 779-780 ◽  
pp. 1674-1677 ◽  
Author(s):  
Dan Lian Huang ◽  
Guang Ming Zeng ◽  
Piao Xu ◽  
Cui Lai ◽  
Mei Hua Zhao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Phanerochaete Chrysosporium ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Of Heavy Metals ◽  
Iron Oxide Magnetic Nanoparticles ◽  
Ca Alginate

Immobilized microbe technologies are expected to be effectively used in wastewater treatment. Removal of heavy-metals from wastewater by immobilized Phanerochaete chrysosporium (Pc) with Ca-alginate and iron oxide magnetic nanoparticles (MNPs) was studied. The results showed that a biosorbent as Pc immobilized by Ca-alginate and iron oxide magnetic nanoparticles was successfully developed. And the iron oxide magnetic nanoparticles played an important role in the increase of biosorption capacity of Pc. Energy dispersive spectrometer (EDS) analysis confirmed that metal ions adsorbed to the surface of the biosorbents were partly transmitted to the interior of biosorbents, mainly embedded with iron oxide nanoparticles and Ca-alginate. Moreover, it was found that MNPs-Ca-alginate immobilized Pc showed a good affinity to various heavy metals, such as Pb(II), Zn(II), Cd(II) or Mg(II) and so on. The results proved the high efficiency of the biosorbents for heavy-metal removal and its potential application in the treatment of metal-containing wastewater.

Heavy metal removal from wastewater and leachate co-treatment sludge by sulfur oxidizing bacteria

2001 ◽  
Vol 44 (10) ◽  
pp. 53-58 ◽  
Author(s):  
L. C. Aralp ◽  
A. Erdincler ◽  
T. T. Onay
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Municipal Wastewater ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Heavy Metal Concentration ◽  
Organic Content ◽  
Removal Of Heavy Metals ◽  
Sulfur Oxidizing ◽  
Sulfur Oxidizing Bacteria

Heavy metal concentration in sludge is one of the major obstacles for the application of sludge on land. There are various methods for the removal of heavy metals in sludge. Using sulfur oxidizing bacteria for microbiological removal of heavy metals from sludges is an outstanding option because of high metal solubilization rates and the low cost. In this study, bioleaching by indigenous sulfur oxidizing bacteria was applied to sludges generated from the co-treatment of municipal wastewater and leachate for the removal of selected heavy metals. Sulfur oxidizing bacteria were acclimated to activated sludge. The effect of the high organic content of leachate on the bioleaching process was investigated in four sets of sludges having different concentrations of leachate. Sludges in Sets A, B, C and D were obtained from co-treatment of wastewater and 3%, 5%, 7% and 10% (v/v) leachate respectively. The highest Cr, Ni and Fe solubilization was obtained from Set A. Sulfur oxidizing bacteria were totally inhibited in Set D that received the highest volume of leachate.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

scholarly journals Removal of Heavy Metals from Wastewater by Adsorption

2021 ◽  
Author(s):  
Athar Hussain ◽  
Sangeeta Madan ◽  
Richa Madan
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Negative Impact ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Raw Material ◽  
Removal Of Heavy Metals ◽  
Cost Effective Technique ◽  
Adsorption Processes

Adsorption processes are extensively used in wastewater treatment for heavy metal removal. The most widely used adsorbent is activated carbon giving the best of results but it’s high cost limits its use. It has a high cost of production and regeneration. As the world today faces a shortage of freshwater resources, it is inevitable to look for alternatives that lessen the burden on existing resources. Also, heavy metals are toxic even in trace concentrations, so an environmentally safe method of their removal necessitated the requirement of low cost adsorbents. Adsorption is a cost-effective technique and gained recognition due to its minimum waste disposal advantage. This chapter focuses on the process of adsorption and the types of adsorbent available today. It also encompasses the low-cost adsorbents ranging from agricultural waste to industrial waste explaining the adsorption reaction condition. The cost-effectiveness, technical applicability and easy availability of raw material with low negative impact on the system are the precursors in selecting the adsorbents. The novelty of the chapter lies in covering a wide range of adsorbents with their efficiency in removal of heavy metals from wastewater.

Inorganic nano-adsorbents for the removal of heavy metals and arsenic: a review

RSC Advances ◽  
2015 ◽  
Vol 5 (38) ◽  
pp. 29885-29907 ◽  
Author(s):  
Phoebe Zito Ray ◽  
Heather J. Shipley
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Of Heavy Metals ◽  
Inorganic Adsorbents ◽  
Heavy Metals And Arsenic

Schematic of inorganic adsorbents (INA) for heavy metal removal.

Wastewater Treatment in Removal of Heavy Metals

2019 ◽  
pp. 220-240
Author(s):  
Tehseen Yaseen ◽  
Anum Yaseen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Wastewater Treatment ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
New Process ◽  
Removal Of Heavy Metals ◽  
Treatment Technologies ◽  
Growing Economy ◽  
Nano Science

Nanotechnology is the area of nano science that shows great potential to establish a new process for wastewater treatment. It has been applied on a nanometer scale level. Currently, limited water resources and real treatment of wastewater is a chief requirement for the growing economy. It is in great demand to introduce the progressive wastewater treatment technologies. Therefore, the modern innovative processes in nanomaterial sciences have been appealing the target of scientists. The chapter addresses the developments in nanotechnology with respect to wastewater treatment, especially the removal of heavy metals and to the environmental applications. It will discuss the application of different classes of nanomaterials for wastewater treatment in removal of heavy metals and its possible effects to the environment. Therefore, the scope is to offer an overview of how nanomaterials are causing concerns related to heavy metal removal for water and in the surrounding environment.

Removal of heavy metals using a wetland batch system with Carrizo (Phragmites Australis)

2020 ◽  
Author(s):  
Maribel Guzman ◽  
Maggy Romero ◽  
Michael Flores ◽  
Sebastian Bravo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Phragmites Australis ◽  
Mine Drainage ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ammonia Nitrogen ◽  
Abandoned Mines ◽  
Slight Variation ◽  
Removal Of Heavy Metals

Abstract One of the greatest environmental issues related to the development of the mining activity is the generation of Acid Mine Drainage (AMD). This effluent generated by active and abandoned mines in Peru produces multiple discussions about the role of the industry for a sustainable development. Many methods have been developed for AMD treatment, being wetlands a good option for heavy metal removal. In this sense, removal of heavy metal by using laboratory constructed wetlands with Phragmites Australis was studied. During a 9-day period the variation of different physicochemical parameters and heavy metals concentrations was recorded. The pH decreased to a constant value of 8.24 after the sixth day. The electrical conductivity presented a slight variation from 1 to 1.33 µS cm-1 on the ninth day. Moreover, fluctuating values of Dissolved Oxygen and Turbidity were observed. A reduction between 69% and 93% of ammonia nitrogen (NH3-N) was registered. Cu concentration was reduced in 68% and 87%; Zn concentrations dropped in 53% and 95%; and Pb was reduced in 20% and 55%. It was concluded that Phragmites Australis can be an alternative in the treatment of the contaminants produced by AMD.

scholarly journals Outlook on the Carbon-Based Materials for Heavy Metal Removal

2021 ◽  
Vol 12 (4) ◽  
pp. 5303-5323
Keyword(s):  
Heavy Metals ◽  
Functional Group ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Carbon Adsorbent ◽  
Water Stream ◽  
Removal Of Heavy Metals ◽  
The Right ◽  
Hazardous Metal ◽  
Carbon Based

Carbon-based materials, including graphene (GR), carbon nanotubes (CNTs), activated carbon, and biochar, are the most common materials often applied to separate heavy metals from the water stream. A key feature of carbon adsorbent is the functional group of its adjustable surfaces. Both GR and CNTs exhibit the most favorable materials and may be the right choice in the future because of their excellent nature and unique structure. In order to commercialize the use of carbon absorbent in the removal of heavy metals, the mechanism of adsorption of carbon on heavy metals must be fully understood. In view of the good properties of carbon-based materials, a detailed study of their characteristics and synthesis, and modifications should be highlighted. Therefore, this article will discuss the properties, modifications, and use of carbon-based materials as adsorbents for various hazardous metal ions.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

Sign in / Sign up

Export Citation Format

Share Document