scholarly journals Removal of Heavy Metals from Wastewater by Adsorption

2021 ◽  
Author(s):  
Athar Hussain ◽  
Sangeeta Madan ◽  
Richa Madan
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Negative Impact ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Raw Material ◽  
Removal Of Heavy Metals ◽  
Cost Effective Technique ◽  
Adsorption Processes

Adsorption processes are extensively used in wastewater treatment for heavy metal removal. The most widely used adsorbent is activated carbon giving the best of results but it’s high cost limits its use. It has a high cost of production and regeneration. As the world today faces a shortage of freshwater resources, it is inevitable to look for alternatives that lessen the burden on existing resources. Also, heavy metals are toxic even in trace concentrations, so an environmentally safe method of their removal necessitated the requirement of low cost adsorbents. Adsorption is a cost-effective technique and gained recognition due to its minimum waste disposal advantage. This chapter focuses on the process of adsorption and the types of adsorbent available today. It also encompasses the low-cost adsorbents ranging from agricultural waste to industrial waste explaining the adsorption reaction condition. The cost-effectiveness, technical applicability and easy availability of raw material with low negative impact on the system are the precursors in selecting the adsorbents. The novelty of the chapter lies in covering a wide range of adsorbents with their efficiency in removal of heavy metals from wastewater.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

2020 ◽  
Vol 1010 ◽  
pp. 489-494
Author(s):  
Abdul Hafidz Yusoff ◽  
Rosmawani Mohammad ◽  
Mardawani Mohamad ◽  
Ahmad Ziad Sulaiman ◽  
Nurul Akmar Che Zaudin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Pineapple Peel

Conventional methods to remove heavy metals from polluted water are expensive and not environmentally friendly. Therefore, this study was carried out to investigate the potential of agricultural waste such as pineapple peel (Ananas Cosmos) as low-cost absorbent to remove heavy metals from synthetic polluted water. The results showed that Cd, Cr and Pb were effectively removed by the biosorbent at 12g of pineapple peels in 100 mL solution. The optimum contact time for maximum adsorption was found to be 90 minutes, while the optimum pH for the heavy metal’s adsorption was 9. It was demonstrated that with the increase of adsorbent dosage, the percent of heavy metals removal was also increased due to the increasing adsorption capacity of the adsorbent. In addition, Langmuir model show maximum adsorption capacity of Cd is 1.91 mg/g. As conclusions, our findings show that pineapple peel has potential to remove heavy metal from polluted water.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

Understanding the factors influencing the removal of heavy metals in urban stormwater runoff

2016 ◽  
Vol 73 (12) ◽  
pp. 2921-2928 ◽  
Author(s):  
Marla C. Maniquiz-Redillas ◽  
Lee-Hyung Kim
Keyword(s):  
Heavy Metals ◽  
Fine Particles ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Stormwater Runoff ◽  
Winter Season ◽  
Filter Media ◽  
Factors Influencing ◽  
Removal Of Heavy Metals

Abstract In this research, an infiltration trench equipped with an extensive pretreatment and filter bed consisting of woodchip, sand and gravel was utilized as a low impact development technique to manage stormwater runoff from a highly impervious road with particular emphasis on heavy metal removal. Findings revealed that the major factors influencing the removal of heavy metals were the concentration of the particulate matters and heavy metals in runoff, runoff volume and flow rates. The reduction of heavy metals was enhanced by sedimentation of particulates through pretreatment. Fine particles (<2 mm) had the most significant amount of heavy metals, thus, enhanced adsorption and filtration using various filter media were important design considerations. Sediment was most highly attached on the surface area of woodchip than to other filter media like sand, gravel and geotextile. It is suggested that maintenance must be performed after the end of the winter season wherein high sediment rate was observed to maintain the efficiency of the treatment system.

Application of Immobilized Fungi Phanerochaete chrysosporium in Removal of Heavy-Metals from Wastewater

2013 ◽  
Vol 779-780 ◽  
pp. 1674-1677 ◽  
Author(s):  
Dan Lian Huang ◽  
Guang Ming Zeng ◽  
Piao Xu ◽  
Cui Lai ◽  
Mei Hua Zhao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Phanerochaete Chrysosporium ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Of Heavy Metals ◽  
Iron Oxide Magnetic Nanoparticles ◽  
Ca Alginate

Immobilized microbe technologies are expected to be effectively used in wastewater treatment. Removal of heavy-metals from wastewater by immobilized Phanerochaete chrysosporium (Pc) with Ca-alginate and iron oxide magnetic nanoparticles (MNPs) was studied. The results showed that a biosorbent as Pc immobilized by Ca-alginate and iron oxide magnetic nanoparticles was successfully developed. And the iron oxide magnetic nanoparticles played an important role in the increase of biosorption capacity of Pc. Energy dispersive spectrometer (EDS) analysis confirmed that metal ions adsorbed to the surface of the biosorbents were partly transmitted to the interior of biosorbents, mainly embedded with iron oxide nanoparticles and Ca-alginate. Moreover, it was found that MNPs-Ca-alginate immobilized Pc showed a good affinity to various heavy metals, such as Pb(II), Zn(II), Cd(II) or Mg(II) and so on. The results proved the high efficiency of the biosorbents for heavy-metal removal and its potential application in the treatment of metal-containing wastewater.

Heavy metal removal from wastewater and leachate co-treatment sludge by sulfur oxidizing bacteria

2001 ◽  
Vol 44 (10) ◽  
pp. 53-58 ◽  
Author(s):  
L. C. Aralp ◽  
A. Erdincler ◽  
T. T. Onay
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Municipal Wastewater ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Heavy Metal Concentration ◽  
Organic Content ◽  
Removal Of Heavy Metals ◽  
Sulfur Oxidizing ◽  
Sulfur Oxidizing Bacteria

Heavy metal concentration in sludge is one of the major obstacles for the application of sludge on land. There are various methods for the removal of heavy metals in sludge. Using sulfur oxidizing bacteria for microbiological removal of heavy metals from sludges is an outstanding option because of high metal solubilization rates and the low cost. In this study, bioleaching by indigenous sulfur oxidizing bacteria was applied to sludges generated from the co-treatment of municipal wastewater and leachate for the removal of selected heavy metals. Sulfur oxidizing bacteria were acclimated to activated sludge. The effect of the high organic content of leachate on the bioleaching process was investigated in four sets of sludges having different concentrations of leachate. Sludges in Sets A, B, C and D were obtained from co-treatment of wastewater and 3%, 5%, 7% and 10% (v/v) leachate respectively. The highest Cr, Ni and Fe solubilization was obtained from Set A. Sulfur oxidizing bacteria were totally inhibited in Set D that received the highest volume of leachate.

Heavy Metal Removal in the Presence of Colloid-Stabilizing Organic Material and Complexing Agents

1986 ◽  
Vol 18 (1) ◽  
pp. 19-29 ◽  
Author(s):  
I. Licskó ◽  
I. Takács
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Colloidal Dispersion ◽  
Laboratory Model ◽  
Complexing Agents ◽  
Stabilizing Agents ◽  
Removal Of Heavy Metals ◽  
Alkaline Conditions ◽  
The Stability

It has been established in laboratory model experiments that the removal of dissolved heavyimetals from wastewaters is rendered more difficult in the presence of colloid-stabilizing agents. This unfavourable effect can be eliminated by the addition of Mg2+ ions and the adjustment to a fairly high pH. By increasing the concentration of Mg2+ ions, the pH necessary for destroying the stability of colloidal dispersion can be lowered. These findings also apply to the combined removal of different heavy metals (Cu, Zn, Cr(III), Ni, Cd). In alkaline conditions, in the presence of ammonium salts, some heavy metals (Cu, Zn, Ni) form high stability amine complexes. A higher pH is necessary for the breakdown of these complexes and the satisfactory removal of heavy metals.

Heavy metal removal from wastewaters by agricultural waste low-cost adsorbents: hindrances of adsorption technology to the large scale industrial application – a review

2017 ◽  
Vol 78 ◽  
pp. 192-214 ◽  
Author(s):  
Alphonse Habineza ◽  
Jun Zhai ◽  
Theoneste Ntakirutimana ◽  
Fu Ping Qiu ◽  
Xiaoting Li ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Industrial Application ◽  
Large Scale ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Adsorption Technology

Applications of Nanoparticles in Heavy Metal Removal for Wastewater Treatment at Brahmani River

2020 ◽  
Vol 17 (9) ◽  
pp. 4666-4670
Author(s):  
Himanshu Sekhar Rath ◽  
Mira Das ◽  
Smita Rath ◽  
U. N. Dash ◽  
Alakananda Tripathy
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Activated Carbons ◽  
Low Cost ◽  
Groundwater Resources ◽  
Heavy Metal Removal ◽  
Absorption Capacity ◽  
Current Standard ◽  
River Stretch

The goal of this research is to determine the current standard of water quality along the Brahmani River stretch in terms of physico-chemical parameters. The River Brahmani receives a substantial amount of industrial waste in the identified study area and is witness to a large amount of human and agricultural activities. Nowadays Ninety percent of Brahmani’s required water is secured with groundwater resources and it is essential to forecast pollutant content in those resources. Hence, this research aimed at using of nanoparticles such as Activated Carbons (ACs) for removal of heavy metal such as nickel and zinc in Brahmani river using the Langmuir approach. Adsorption seems to be the most widely used method for heavy metal recovery due to its low cost, easy installation and the presence of alternative adsorbents. In addition, the process of adsorption can also be made in use to recover heavy metal ions from wastewater. Despite these advantages, adsorption is hard to commercialize. Due to the strong absorption capacity, high number of pores and wide, common area, nanoparticles are treated as the effective method in removal of heavy metals in rivers. Comparative analysis shows that seventy-one percent of heavy metals can be removed using the nanotechnology model.

An Overview of Fruit Waste as Sustainable Adsorbent for Heavy Metal Removal

2013 ◽  
Vol 389 ◽  
pp. 29-35 ◽  
Author(s):  
Norzila Othman ◽  
S. Mohd-Asharuddin ◽  
M.F.H. Azizul-Rahman
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Cost Effective ◽  
Good Efficiency ◽  
Recovery Method ◽  
High Metal Content ◽  
Fruit Waste

Biosorption is an environmental friendly method for metal removal as it can be used as a cost effective and efficient technique for heavy metal removal. A lot of biomass can be choosed as biosorbent such as waste material from food processing and agriculture.ent. This paper will review the potential used of local fruit rind as biosorbent for heavy metal removal in wastewater. Heavy metals have been in various industries and resulted to a toxic condition in aquatic ecosystem. Therefore, various techniques have been employed for the treatment of metal-bearing industrial wastewaters including biological treatment through biosorption. Biosorption offers the advantages of low cost, good efficiency and production of sludge with high metal content is possible to avoid by the existence of metal recovery method from metal loaded biosorbent. The successful application of local fruit waste in treating wastewater containing heavy metals requires a deeper understanding of how biosorbent material proceeds.

Sign in / Sign up

Export Citation Format

Share Document