Synthesis and characterization of a new magnetic adsorbent for removal of 4-nitrophenol: application of response surface methodology

2019 ◽  
Vol 80 (8) ◽  
pp. 1430-1442
Author(s):  
Reza Gholamnia ◽  
Mehrnoosh Abtahi ◽  
Reza Saeedi ◽  
Shokooh Sadat Khaloo
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Response Surface ◽  
Second Order ◽  
Quadratic Model ◽  
Maximum Adsorption Capacity ◽  
Modified Graphene Oxide ◽  
Pseudo Second Order ◽  
Modified Graphene ◽  
Graphene Oxide Sheets

Abstract Magnetic modified graphene oxide was synthesized as a new modified magnetic nano-composite (MMNC) by a simple sonochemical–hydrothermal method. The sonochemical reaction was employed to exfoliate, functionalize and decorate neomycin on graphene oxide sheets. Nickel ferromagnetic particles were synthesized by hydrothermal co-precipitation method and decorated on neomycin-modified graphene oxide. The morphology and chemical structure of MMNC were characterized by scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction spectroscopy. The adsorption capability of MMNC for removal of phenolic compounds was assessed through adsorption of 4-nitrophenol (4-NP) from aqueous solution. The three-factor Box–Behnken design coupled with response surface method was applied to evaluate and optimize the important variables which affect the adsorption process. A significant quadratic model (p-value <0.05, R2(adj) = 0.9593) was derived using analysis of variance. The maximum adsorption capacity of 125.4 mg 4-NP/g MMNC at pH 6 was obtained, which was comparable in some cases and higher than most adsorbents reported in the literature. The presence of neomycin on graphene oxide sheets improved the maximum adsorption capacity of the nano-sorbent up to 28% (from 98.7 to 125.4 mg 4-NP/g adsorbent). The adsorption isotherms fitted well with the Langmuir model (Langmuir constant b = 0.064 l/mg, R2 = 0.9989) and the kinetic study showed that the nitrophenol uptake process followed the pseudo-second-order rate expression (R2 ≥ 0.9960, pseudo-second-order constant K2 ≥ 1.7 × 10−3).

scholarly journals Kinetic Study of the Bioadsorption of Methylene Blue on the Surface of the Biomass Obtained from the Algae D. antarctica

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jhonatan R. Guarín ◽  
Juan Carlos Moreno-Pirajan ◽  
Liliana Giraldo
Keyword(s):  
Methylene Blue ◽  
Kinetic Study ◽  
Adsorption Capacity ◽  
Scientific Community ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Total Elimination ◽  
Purification Of Water

Currently, there is a great pollution of water by the dyes; due to this, several studies have been carried out to remove these compounds. However, the total elimination of these pollutants from the aquatic effluents has represented a great challenge for the scientific community, for which it is necessary to carry out investigations that allow the purification of water. In this work, we studied the bioadsorption of methylene blue on the surface of the biomass obtained from the algae D. antarctica. This material was characterized by SEM and FTIR. To the data obtained in the biosorption experiments, different models of biosorption and kinetics were applied, finding that the best fit to the obtained data is given by applying the pseudo-second-order models and the Toth model, respectively. It was also determined that the maximum adsorption capacity of MB on the surface of the biomass is 702.9 mg/g, which shows that this material has great properties as a bioadsorbent.

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

scholarly journals Electrochemical Evaluation of Selenium (IV) Removal from Its Aqueous Solutions by Unmodified and Modified Graphene Oxide

Molecules ◽  
2019 ◽  
Vol 24 (6) ◽  
pp. 1063
Author(s):  
Zuzana Koudelkova ◽  
Zuzana Bytesnikova ◽  
Kledi Xhaxhiu ◽  
Monika Kremplova ◽  
David Hynek ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Iron Oxide ◽  
Adsorption Capacity ◽  
Selenium Concentration ◽  
Stripping Voltammetry ◽  
World Health ◽  
Maximum Adsorption Capacity ◽  
Adsorption Model ◽  
Graphene Oxides ◽  
Modified Graphene Oxide

The removal of selenium from superficial and waste water is a worldwide problem. The maximum limit according to the World Health Organization (WHO) for the selenium in the water is set at a concentration of 10 μg/L. Carbon based adsorbents have attracted much attention and recently demonstrated promising performance in removal of selenium. In this work, several materials (iron oxide based microparticles and graphene oxides materials) and their composites were prepared to remove Se(IV) from water. The graphene oxides were prepared according to the simplified Hummer’s method. In addition, the effect of pH, contact time and initial Se(IV) concentration was tested. An electrochemical method such as the differential pulse cathodic stripping voltammetry was used to determine the residual selenium concentration. From the experimental data, Langmuir adsorption model was used to calculate the maximum adsorption capacity. Graphene oxide particles modified by iron oxide based microparticles was the most promising material for the removal of Se(IV) from its aqueous solution at pH 2.0. Its adsorption efficiency reached more than 90% for a solution with given Se(IV) concentration, meanwhile its maximal recorded adsorption capacity was 18.69 mg/g.

scholarly journals Adsorption of Copper(II) and Mercury(II) Ions onto Chemically-Modified Chitosan Membranes: Equilibrium and Kinetic Properties

2012 ◽  
Vol 30 (1) ◽  
pp. 1-21 ◽  
Author(s):  
R.B. Rabelo ◽  
R.S. Vieira ◽  
F.M.T. Luna ◽  
E. Guibal ◽  
M.M. Beppu
Keyword(s):  
Adsorption Capacity ◽  
Metal Ion ◽  
Batch Process ◽  
Second Order ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Kinetic Properties ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Chitosan Membranes

Cross-linked chitosan was synthesized with glutaraldehyde (chitosan–GLA) and epichlorohydrin (chitosan–ECH). The structures of these matrices were characterized by elemental analysis, Fourier-transform infrared spectrometry (FT-IR), the degree of de-acetylation and the surface topography as determined via scanning electron microscopy (SEM). After promoting interaction with the metal ion, the adsorbent was also studied using FT-IR and energy dispersive X-ray spectroscopy (EDXS). Adsorption studies for Cu(II) and Hg(II) ions were carried out in a batch process. The adsorption kinetics were tested using three models, viz. pseudo-first-order, pseudo-second-order and intra-particle diffusion. The experimental kinetic data were best fitted by the pseudo-second-order model for Cu(II) ions (R2 ≥ 0.98) and for Hg(II) ions (R2 = 0.99). Higher rate constants (k2) were obtained for the adsorption of Cu(II) ions onto chitosan–GLA [1.40 g/(mmol h)] and for Hg(II) ions onto raw chitosan [5.65 g/(mmol h)]. The adsorption rate depended on the concentration of Cu(II) and Hg(II) ions on the adsorbent surface and on the quantity of ions adsorbed at equilibrium. At 293 K, the Langmuir–Freundlich model provided a better fit to the adsorption isotherms on both raw and cross-linked chitosan membranes. The maximum adsorption capacity for Cu(II) ions was obtained with the chitosan–GLA matrix (2.7 mmol/g). A maximum adsorption capacity of 3.1 mmol/g was attained for Hg(II) ions onto the chitosan–ECH matrix.

Equilibrium, kinetic and thermodynamic studies of mercury adsorption on almond shell

2012 ◽  
Vol 65 (8) ◽  
pp. 1341-1349 ◽  
Author(s):  
Shokooh Sadat Khaloo ◽  
Amir Hossein Matin ◽  
Sahar Sharifi ◽  
Masoumeh Fadaeinia ◽  
Narges Kazempour ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Second Order ◽  
Ion Concentration ◽  
Physical Parameters ◽  
Maximum Adsorption Capacity ◽  
Almond Shell ◽  
Pseudo Second Order ◽  
Uptake Process ◽  
Reaction Equations

The application of almond shell as a low cost natural adsorbent to remove Hg2+ from aqueous solution was investigated. Batch experiments were carried out to evaluate the adsorption capacity of the material. The chemical and physical parameters such as pH, sorbent amount, initial ion concentration, and contact time were optimized for the maximum uptake of mercury onto the solid surface. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models, and the experimental data were found to fit the Langmuir model rather than the Freundlich. The maximum adsorption capacity obtained from the Langmuir isotherm was 135.13 mg/g. A kinetic study was carried out with pseudo-first-order and pseudo-second-order reaction equations and it was found that the Hg2+ uptake process followed the pseudo-second-order rate expression. The thermodynamic values, ΔG0, ΔH0 and ΔS0, indicated that adsorption was an endothermic and spontaneous process. The potential of this material for mercury elimination was demonstrated by efficient Hg2+ removal from a synthetic effluent.

Poly(ethylene imine)-modified graphene oxide with improved colloidal stability and its adsorption of methyl orange

2014 ◽  
Vol 70 (5) ◽  
pp. 851-857 ◽  
Author(s):  
Hongxi Liu ◽  
Ting Wu ◽  
Zhimin Wu ◽  
Yong Zhang ◽  
Keqin Xuan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Methyl Orange ◽  
Adsorption Capacity ◽  
Colloidal Stability ◽  
Ethylene Imine ◽  
Chemically Modified ◽  
Modified Graphene Oxide ◽  
Infrared Spectrometer ◽  
Poly Ethylene ◽  
Modified Graphene

Graphene oxide (GO) was chemically modified with poly(ethylene imine) (PEI) to improve its colloidal stability and was investigated as a potential adsorbent for the removal of methyl orange (MO). The synthesis of PEI-GO was verified with a Fourier transform infrared spectrometer and thermogravimetric analysis. A series of adsorption experiments were carried out to investigate the adsorption capacity of PEI-GO. Adsorption kinetics and thermodynamics studies were performed, and the thermodynamic parameters were calculated. The results showed that PEI could improve the colloidal stability of GO in aqueous solution, and the obtained PEI-GO showed a macroscopically homogeneous dispersion after more than three months. After standing for 90 days, the Brunauer–Emmett–Teller specific surface area of GO decreased from 353 to 214 m2 · g−1, while that of PEI-GO remained almost unchanged (from 432 to 413 m2 · g−1). The PEI-GO exhibited significantly faster kinetic and higher adsorption capacity for MO than GO. Moreover, PEI-GO had a good adsorption capacity in the acidic range, and the highest adsorption of MO occurred at pH = 6.0. The adsorption of MO on PEI-GO was an endothermic, spontaneous and physisorption process.

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

Chromium (VI) adsorption onto activated sulfate lignin

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Nassima Tazrouti ◽  
Moussa Amrani
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Analytical Data ◽  
Order Equation ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Adsorption Model ◽  
Chromium Vi ◽  
Pseudo Second Order

Activated lignin having surface area of 1023 m2.g-1 has been prepared from sulfate lignin that was treated by 30 % H2O2 and carbonized at 300 °C in order to test the chromium (VI) adsorption from aqueous solution. The influence of contact time, pH, initial concentration of adsorbent and adsorbate and temperature on the adsorption capacity were investigated. The maximum removal of Cr(VI) was found to be 92,36 % at pH=2 and contact time of 80 min. Optimal concentration of lignin and Cr(VI) were found to be 3.8 g.l-1 and 180 mg.l-1, respectively. The adsorption kinetics was tested pseudo-first-order and pseudo-second-order equation. The analytical data were fitted well in a pseudo-second-order equation and the rate of removal of chromium was found to speed up with increasing temperature. Activation energy for the adsorption process was found to be 18.19 Kj.mol-1. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherm and isotherm constants for the adsorption of Cr (VI) on lignin. These constants and correlation coefficients of the isotherm models were calculated and compared. Results indicated that Cr (VI) uptake could be described by the Langmuir adsorption model. The maximum adsorption capacity (qm) of Cr (VI) on lignin was 75.75 mg.g-1 at temperature of 40°C. The dimensionless equilibrium parameter (RL) signified a favorable adsorption of Cr (VI) on lignin and was found between 0.0601 and 0.818 (0<RL<1). The thermodynamic parameters like ΔG°, ΔS° and ΔH° were calculated and it has been found that the reaction was spontaneous and endothermic in nature. This study indicates that lignin has the potential to become an effective and economical adsorbent for removal Cr (VI) from the waste water.

scholarly journals The Process of Separating Bovine Serum Albumin Using Hydroxyapatite and Active Babassu Coal (Orbignya martiana)

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Márcia Regina Ribeiro Alves ◽  
Abraham Damian Giraldo Zuñiga ◽  
Rita de Cássia Superbi Sousa ◽  
Carmelita Zacchi Scolforo
Keyword(s):  
Bovine Serum Albumin ◽  
Zeta Potential ◽  
Serum Albumin ◽  
Adsorption Capacity ◽  
Bovine Serum ◽  
Serum Proteins ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Synthetic Hydroxyapatite

Bovine serum albumin is one of the major serum proteins; it plays an important role as a result of its functional and nutritional properties which have bioactive peptides. Adsorption method was used to separate protein, which involves hydroxyapatite, synthetic hydroxyapatite, and active babassu coal. Initially, characterization was carried out using the zeta potential of the adsorbents. Kinetic pseudo-first- and pseudo-second-order models were applied. For isotherms, equilibrium data studies were carried out using the Langmuir and Freundlich models, in addition to determining the efficiency of adsorptive process. The results of the zeta potential showed loads ranging from +6.9 to −42.8 mV. The kinetic data were better represented in the pseudo-second-order model with chemisorption characteristics. The adsorption capacity of the adsorbents decreased as pH increased, indicating that the electrostatic bonds and some functional groups of active babassu coal contributed to the reduction of adsorption, especially oxygen linked to carbon atoms. The value of pH 4.0 showed the best results of adsorption, being obtained as the maximum adsorption capacity (qm) and yield (%) (whereqm=87.95 mg g−1and 74.2%; 68.26 mg g−1and 68.6%; and 36.18 mg g−1, 37.4%) of hydroxyapatite, synthetic hydroxyapatite, and active babassu coal, respectively.

Sign in / Sign up

Export Citation Format

Share Document