Synthesis and Characterization of GO-Chit-Ni Nanocomposite as a Recoverable Nanocatalyst for Reducing Nitroarenes in Water

2020 ◽  
Vol 17 (7) ◽  
pp. 523-531
Author(s):  
Mosayeb Sarvestani ◽  
Roya Azadi
Keyword(s):  
Fourier Transforms ◽  
Considerable Change ◽  
Environmentally Benign ◽  
X Ray Diffraction ◽  
Simple Method ◽  
Transmission Electron ◽  
Ir Transmission ◽  
Aryl Amines ◽  
Ft Ir

In the present study, nickel nanoparticles (Ni-NPs) immobilized on graphene oxide-chitosan (GO-Chit-Ni) have been synthesized and characterized as a catalyst for reduction of nitroarenes in water. For this purpose, GO has been functionalized with chitosan (GO-Chit). Then, Ni-NPs were immobilized on the surface of GO-Chit using a simple method. The GO-Chi-Ni nanocomposites were characterized using Fourier Transforms Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), X-Ray Diffraction Measurements (XRD), and Atomic Adsorption Spectrometry (AAS). The GO-Chi-Ni nanoparticles demonstrated appropriate catalytic activity in reducing nitroarenes to aryl amines in the existence of sodium borohydride (NaBH4) aqueous solution as a hydrogen source at 80oC. This catalytic system applies environmentally benign water as a solvent that is cheap, easily accessible, non-toxic, non-volatile, non-flammable and thermally stable. This type of catalyst can be applied several times with no considerable change in its performance.

Preparation and Characterization of NiO Nanoparticles through Thermal Decomposition of Bis(glycinato)Nickel(II)dihydrate

2012 ◽  
Vol 601 ◽  
pp. 21-25
Author(s):  
Wei Yi Dan ◽  
Jian Fen Li ◽  
Xiang Chen Tu ◽  
Kui Le Jia
Keyword(s):  
Reaction Time ◽  
Fourier Transforms ◽  
Infrared Spectrometry ◽  
Nio Nanoparticles ◽  
X Ray Diffraction ◽  
Fine Crystal ◽  
Transmission Electron ◽  
Mean Size ◽  
Ft Ir

NiO nanoparticles were successfully prepared by decomposing the predecessor bis(glycinato)nickel(II)dihydrate in the presence of oleylamine and triphenylphosphine (TPP), and different approaches including Fourier transforms infrared spectrometry(FT-IR), X-ray diffraction(XRD) and transmission electron microscopy (TEM) were used to characterize the NiO nanoparticles. Meanwhile, the effects of TPP concentration and reaction time on the size and yield of NiO nanoparticles derived from precursors were thoroughly investigated in this paper. The analysis results indicated that the prepared NiO nanoparticles were found spherical in shape and demonstrated weak agglomeration. They had generally high purity and a fine crystal phase of cubic syngony. Furthermore, the effects of the TPP concentration and reaction time on the size and yield of NiO nanoparticles are very crucial, higher concentration of TPP would results in reduction of both the mean size and yield of NiO particles. However both yields and particles size of NiO nanoparticles continuously increased as increasing reaction time, after more than 60 minutes, the size and yield of NiO nanoparticles kept hardly change.

Synthesis and Characterization of ZrO2/Graphene Nanocomposite Materials

2012 ◽  
Vol 531 ◽  
pp. 161-164 ◽  
Author(s):  
Zong Hua Wang ◽  
Fu Qiang Zhu ◽  
Jan Fei Xia ◽  
Fei Fei Zhang ◽  
Yan Zhi Xia ◽  
...  
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Simple Method ◽  
Transmission Electron ◽  
Ft Ir ◽  
Graphene Nanocomposite ◽  
Adsorption Desorption

Zirconia/graphene (ZrO2/graphene) nanocomposite has been successfully synthesized by a simple method. The as-prepared nanocomposite was characterized using transmission electron microscopy (TEM), FT-IR spectroscopy, power X-ray diffraction (XRD) and nitrogen adsorption-desorption. It was found that tetragonal ZrO2was uniformly deposited on graphene, which resulted in the formation of two-dimensional nanocomposite, it showed a high surface area of 165 m2/g.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Study on Modified Rapeseed Oil/Montmorillonite Nanocomposites

2010 ◽  
Vol 123-125 ◽  
pp. 1291-1294 ◽  
Author(s):  
Bin Lü ◽  
Jian Zhong Ma ◽  
Dang Ge Gao ◽  
Lei Hong
Keyword(s):  
Rapeseed Oil ◽  
Fourier Transforms ◽  
Raw Materials ◽  
Infrared Spectrometry ◽  
Emulsifying Properties ◽  
X Ray Diffraction ◽  
Layer Spacing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Better Than

Modified rapeseed oil(MRO) was prepared by using rapeseed oil, ethylene diamine and acrylic acid as the raw materials. Modified rapeseed oil/montmorillonite(MRO/MMT) nanocomposite was prepared by using modified rapeseed oil and montmorillonite. The emulsifying properties of MRO and MRO/MMT were determined respectively. Fourier transforms infrared spectrometry (FT-IR) and Transmission Electron microscope (TEM) results showed that MRO/MMT was prepared successfully. X-ray diffraction (XRD) results showed that modified rapeseed oil could smoothly enter the interlayer of montmorillonite, and modified the montmorillonite; with an increase in the amount of montmorillonite, the layer spacing of montmorillonite in the MRO/MMT lower after the first increase. The results of emulsifying properties indicated that emulsifying properties of MRO/MMT was better than MRO.

Carbon Nanotube Templated Growth of the Nano-Crystalline NaY Zeolite

2011 ◽  
Vol 194-196 ◽  
pp. 594-597
Author(s):  
Ke Tang ◽  
Xin Hong ◽  
Jin Gang Qi
Keyword(s):  
Structural Characteristics ◽  
Internal Diameter ◽  
X Ray Diffraction ◽  
Nay Zeolite ◽  
Nano Crystalline ◽  
Transmission Electron ◽  
Ir Transmission ◽  
Ft Ir ◽  
Nay Zeolites ◽  
Nanosized Zeolites

FAU-type(NaY) zeolites nanocrystals have been synthesized through crystallization of gel in mesoporous system of carbon nanotubes(CNTS) with a internal diameter of 20~30 nm. Investigation by using X-ray diffraction (XRD), Fourier transform infrared (FT-IR), transmission electron microscope (TEM) shows that the nanocrystals possess the typical nanosized zeolites structural characteristics which is different from those of microsized zeolites.

scholarly journals An Efficient and Novel Ammonia Sensor Based on Polypyrrole/Tin Oxide/MWCNT Nanocomposite

2020 ◽  
Vol 32 (6) ◽  
pp. 1505-1510
Author(s):  
Ahmad Husain ◽  
Mohd Urooj Shariq ◽  
Anees Ahmad
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Charge Carriers ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Ammonia Sensing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

In present study, the synthesis and characterization of a novel polypyrrole (PPy)/tin oxide (SnO2)/MWCNT nanocomposite along with pristine polypyrrole is reported. These materials have been studied for their structural and morphological properties by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. PPy/SnO2/MWCNT nanocomposite has been converted into a pellet-shaped sensor, and its ammonia sensing studies were carried out by calculating the variation in the DC electrical conductivity at different concentration of ammonia ranging from 10 to 1500 ppm. The sensing response of the sensor was determined at 1500, 1000, 500, 200, 100 and 10 ppm and found to be 70.4, 66.1, 62.2, 55.4, 50.8 and 39.7%, respectively The sensor showed a complete reversibility at lower concentrations along with excellent selectivity and stability. Finally, a sensing mechanism was also proposed involving polarons (charge carriers) of polypyrrole and lone pairs of ammonia molecules

scholarly journals Synthesis, Characterization, and Tribological Behavior of Oleic Acid Capped Graphene Oxide

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Tiedan Chen ◽  
Yanqiu Xia ◽  
Zhengfeng Jia ◽  
Zhilu Liu ◽  
Haobo Zhang
Keyword(s):  
Graphene Oxide ◽  
Oleic Acid ◽  
Friction And Wear ◽  
Graphite Powder ◽  
X Ray Diffraction ◽  
Wear Properties ◽  
Transmission Electron ◽  
Alpha Olefin ◽  
Ir Transmission ◽  
Ft Ir

Graphene oxide (GO) nanosheets were prepared by modified Hummers and Offeman methods. Furthermore, oleic acid (OA) capped graphene oxide (OACGO) nanosheets were prepared and characterized by means of Fourier transform-infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and X-ray diffraction (XRD). At the same time, the friction and wear properties of OA capped graphite powder (OACG), OACGO, and oleic acid capped precipitate of graphite (OACPG) as additives in poly-alpha-olefin (PAO) were compared using four-ball tester and SRV-1 reciprocating ball-on-disc friction and wear tester. By the addition of OACGO to PAO, the antiwear ability was improved and the friction coefficient was decreased. Also, the tribological mechanism of the GO was investigated.

Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor

2013 ◽  
Vol 32 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Mahdiyeh Esmaeili-Zare ◽  
Masoud Salavati-Niasari ◽  
Davood Ghanbari
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mercury Selenide ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractMercury selenide nanostructures were synthesized from the reaction of N, N′-bis(salicylidene)propane-1,3-diamine mercury complex, (Hg(Salpn)) as a novel precursor, via sonochemical method. The effect of different surfactant on the morphology and particle size of the products was investigated. Products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray energy dispersive spectroscopy (EDS).

scholarly journals Isolation and Characterization of Cellulose Nanofibers fromGigantochloa scortechiniias a Reinforcement Material

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Chaturbhuj K. Saurabh ◽  
Asniza Mustapha ◽  
M. Mohd. Masri ◽  
A. F. Owolabi ◽  
M. I. Syakir ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cellulose Nanofibers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Isolation And Characterization ◽  
Transmission Electron ◽  
Reinforcement Material ◽  
Bamboo Fibers ◽  
Ft Ir

Cellulose nanofibers (CNF) were isolated fromGigantochloa scortechiniibamboo fibers using sulphuric acid hydrolysis. This method was compared with pulping and bleaching process for bamboo fiber. Scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis were used to determine the properties of CNF. Structural analysis by FT-IR showed that lignin and hemicelluloses were effectively removed from pulp, bleached fibers, and CNF. It was found that CNF exhibited uniform and smooth morphological structures, with fiber diameter ranges from 5 to 10 nm. The percentage of crystallinity was significantly increased from raw fibers to cellulose nanofibers, microfibrillated, along with significant improvement in thermal stability. Further, obtained CNF were used as reinforcement material in epoxy based nanocomposites where tensile strength, flexural strength, and modulus of nanocomposites improved with the addition of CNF loading concentration ranges from 0 to 0.7%.

Poly(L-Lactide) Composite Nanofibers Incorporating POSS-MWNTs

2011 ◽  
Vol 175-176 ◽  
pp. 341-344 ◽  
Author(s):  
Byoung Suhk Kim ◽  
Kyu Oh Kim ◽  
Ick Soo Kim
Keyword(s):  
Composite Nanofibers ◽  
X Ray Diffraction ◽  
Multiwalled Carbon ◽  
Raman Analysis ◽  
X Ray ◽  
Polyhedral Oligosilsesquioxane ◽  
Hybrid Nanofibers ◽  
Transmission Electron ◽  
Ir Transmission ◽  
Ft Ir

We report the electrospun poly(L-lactide) (PLA) nanofibers incorporating polyhedral oligosilsesquioxane (POSS)-modified multiwalled carbon nanotubes (MWNTs). FT-IR, transmission electron microscopy (TEM) and Raman analysis confirmed the existence of POSS macromers bonded to the MWNTs as an extra phase. The thermal and microstructure properties of the PLA hybrid nanofibers with POSS-modified MWNTs were investigated by thermogravimetric analysis (TGA) and Wide-angle X-ray diffraction (WAXD).

Sign in / Sign up

Export Citation Format

Share Document