Similarity Laws for Turbine Specific Speed and Cavitations

2021 ◽  
pp. 103-123
Author(s):  
Jafar Mehdi Hassan ◽  
Salman Hussien Omran ◽  
Laith Jaafer Habeeb ◽  
Alamaslamani Ammar Fadhil Shnawa ◽  
Adrian Ciocănea
Keyword(s):  
Specific Speed ◽  
Similarity Laws

Theory and application of two-dimension viscous hydraulic design of the ultra-low specific-speed centrifugal pump

2019 ◽  
Vol 234 (1) ◽  
pp. 58-71 ◽  
Author(s):  
Cong Wang ◽  
Yongxue Zhang ◽  
Hucan Hou ◽  
Zhiyi Yuan
Keyword(s):  
Boundary Layer ◽  
Centrifugal Pump ◽  
Diagnostic Model ◽  
Two Dimension ◽  
Cavitation Performance ◽  
Hydraulic Design ◽  
Displacement Thickness ◽  
Low Specific Speed ◽  
Specific Speed ◽  
Low Efficiency

Low efficiency and bad cavitation performance restrict the development of the ultra-low specific-speed centrifugal pump (ULSSCP). In this research, combined turbulent boundary layer theory with two-dimension design and two-dimension viscous hydraulic design method has been proposed to redesign a ULSSCP. Through the solution of the displacement thickness in the boundary layer, a less curved blade profile with a larger outlet angle was obtained. Then the hydraulic and cavitation performance of the reference pump and the designed pump were numerically studied. The comparison of performance of the reference pump calculated by the numerical and experimental results revealed a better agreement. Research shows that the average hydraulic efficiency and head of the designed pump improve by 2.9% and 3.3%, respectively. Besides, the designed pump has a better cavitation performance. Finally, through the internal flow analysis with entropy production diagnostic model, a 24.8% drop in head loss occurred in the designed pump.

Optimal hydraulic design of an ultra-low specific speed centrifugal pump based on the local entropy production theory

2019 ◽  
Vol 233 (6) ◽  
pp. 715-726 ◽  
Author(s):  
Hucan Hou ◽  
Yongxue Zhang ◽  
Xin Zhou ◽  
Zhitao Zuo ◽  
Haisheng Chen
Keyword(s):  
Entropy Production ◽  
Centrifugal Pump ◽  
Orthogonal Design ◽  
High Energy ◽  
Geometrical Parameters ◽  
Production Theory ◽  
Local Entropy ◽  
Hydraulic Design ◽  
Low Specific Speed ◽  
Specific Speed

The ultra-low specific speed centrifugal pump has been widely applied in aerospace engineering, metallurgy, and other industrial fields. However, its hydraulic design lacks specialized theory and method. Moreover, the impeller and volute are designed separately without considering their coupling effect. Therefore, the optimal design is proposed in this study based on the local entropy production theory. Four geometrical parameters are selected to establish orthogonal design schemes including blade outlet setting angle, wrapping angle volute inlet width, and throat area. Subsequently, a 3D steady flow with Reynolds stress turbulent model and energy equation model is numerically conducted and the entropy production is calculated by a user-defined function code. The range analysis is made to identify the optimal scheme indicating that the combination of local entropy production and orthogonal design is feasible on pump optimization. The optimal pump is visibly improved with an increase of 1.08% in efficiency. Entropy production is decreased by 16.75% and 6.03% in impeller and volute, respectively. High energy loss areas are captured and explained in terms of helical vortex and wall friction, and the turbulent and wall entropy production are respectively reduced by 3.82% and 14.34% for the total pump.

Regenerative flow pumps, blowers and compressors – A review

2021 ◽  
pp. 095765092110181
Author(s):  
M Sreekanth ◽  
R Sivakumar ◽  
M Sai Santosh Pavan Kumar ◽  
K Karunamurthy ◽  
MB Shyam Kumar ◽  
...  
Keyword(s):  
Quantitative Data ◽  
Research Work ◽  
Future Research ◽  
Performance Parameters ◽  
The World ◽  
Working Principle ◽  
Computational Fluid Dynamics Cfd ◽  
Specific Speed ◽  
Regenerative Flow ◽  
Product Description

This paper presents a detailed and objective review of regenerative flow turbomachines, namely pumps, blowers and compressors. Several aspects of turbomachines like design and operating parameters, working principle, flow behaviour, performance parameters and analytical and Computational Fluid Dynamics (CFD) related details have been reviewed and summarized. Experimental work has been put in perspective and the most useful results for optimized performance have been presented. Consolidated plots of specific speed-specific diameter have been plotted which can be helpful in the early stages of design. Industrial outlook involving details of suppliers from various parts of the world, their product description and applications too are included. Finally, future research work to be carried out to make these machines widespread is suggested. This review is targeted at designer engineers who would need quantitative data to work with.

scholarly journals Improving the efficiency of the operating process of high specific speed torque-flow pumps by upgrading the flowing part design

2021 ◽  
Vol 1741 ◽  
pp. 012023
Author(s):  
V Y Kondus ◽  
R V Puzik ◽  
V F German ◽  
V O Panchenko ◽  
S M Yakhnenko
Keyword(s):  
Operating Process ◽  
Specific Speed

scholarly journals Analysis of Radial Inflow Turbine Losses Operating with Supercritical Carbon Dioxide

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3561
Author(s):  
Antti Uusitalo ◽  
Aki Grönman
Keyword(s):  
Fluid Dynamic ◽  
Dynamic Simulations ◽  
Average Deviation ◽  
Loss Analysis ◽  
Specific Speed ◽  
Loss Models ◽  
Rotor Losses ◽  
Radial Turbines ◽  
Design Power ◽  
Good Agreement

The losses of supercritical CO2 radial turbines with design power scales of about 1 MW were investigated by using computational fluid dynamic simulations. The simulation results were compared with loss predictions from enthalpy loss correlations. The aim of the study was to investigate how the expansion losses are divided between the stator and rotor as well as to compare the loss predictions obtained with the different methods for turbine designs with varying specific speeds. It was observed that a reasonably good agreement between the 1D loss correlations and computational fluid dynamics results can be obtained by using a suitable set of loss correlations. The use of different passage loss models led to high deviations in the predicted rotor losses, especially with turbine designs having the highest or lowest specific speeds. The best agreement in respect to CFD results with the average deviation of less than 10% was found when using the CETI passage loss model. In addition, the other investigated passage loss models provided relatively good agreement for some of the analyzed turbine designs, but the deviations were higher when considering the full specific speed range that was investigated. The stator loss analysis revealed that despite some differences in the predicted losses between the methods, a similar trend in the development of the losses was observed as the turbine specific speed was changed.

scholarly journals Optimal Design of Slit Impeller for Low Specific Speed Centrifugal Pump Based on Orthogonal Test

2021 ◽  
Vol 9 (2) ◽  
pp. 121
Author(s):  
Yang Yang ◽  
Ling Zhou ◽  
Hongtao Zhou ◽  
Wanning Lv ◽  
Jian Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Large Scale ◽  
Internal Flow ◽  
Orthogonal Test ◽  
Centrifugal Pumps ◽  
Initial Model ◽  
Low Specific Speed ◽  
Specific Speed ◽  
Four Levels

Marine centrifugal pumps are mostly used on board ship, for transferring liquid from one point to another. Based on the combination of orthogonal testing and numerical simulation, this paper optimizes the structure of a drainage trough for a typical low-specific speed centrifugal pump, determines the priority of the various geometric factors of the drainage trough on the pump performance, and obtains the optimal impeller drainage trough scheme. The influence of drainage tank structure on the internal flow of a low-specific speed centrifugal pump is also analyzed. First, based on the experimental validation of the initial model, it is determined that the numerical simulation method used in this paper is highly accurate in predicting the performance of low-specific speed centrifugal pumps. Secondly, based on the three factors and four levels of the impeller drainage trough in the orthogonal test, the orthogonal test plan is determined and the orthogonal test results are analyzed. This work found that slit diameter and slit width have a large impact on the performance of low-specific speed centrifugal pumps, while long and short vane lap lengths have less impact. Finally, we compared the internal flow distribution between the initial model and the optimized model, and found that the slit structure could effectively reduce the pressure difference between the suction side and the pressure side of the blade. By weakening the large-scale vortex in the flow path and reducing the hydraulic losses, the drainage trough impellers obtained based on orthogonal tests can significantly improve the hydraulic efficiency of low-specific speed centrifugal pumps.

Sign in / Sign up

Export Citation Format

Share Document