scholarly journals LABORATORY STUDY OF ASPHALT STARBIT E-55 POLYMER MODIFIED APPLICATION ON ASPHALT CONCRETE WEARING COURSE (AC-WC) IN TERMS OF DURABILITY AND INDIRECT TENSILE STRENGTH

2015 ◽  
Vol 1 (3) ◽  
pp. 101
Author(s):  
Damianus Kans Pangaraya
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Performance Test ◽  
Optimum Level ◽  
Modified Bitumen ◽  
Vehicle Load ◽  
Asphalt Road ◽  
Indirect Tensile ◽  
Test Result ◽  
Polymer Modified Bitumen

The conventional asphalt road has almost been considered fail to serve the transportation needs. It is indicated by the occurrence of premature damage which is caused by vehicle load and climate. Starbit E-55, the polymer modified bitumen, is formulated to meet the requirement of transport development. Considering those needs, it is important to investigate the feasibility level of that modified bitumen as alternate asphalt instead of the conventional one. This research began with the measurement of the properties of hard layered AC-WC Starbit E-55, then comparing the result to 60/70 penetration of Pertamina asphalt. The next step is then, to determine the converted value so as to be close to that of Pertamina (60/70 penetration). This step is conducted by applying durability and ITS tests on the mixture. Result of the tests showed that hard layered AC-WC Starbit E-55 has better characteristic at 5.7% optimum level asphalt and 6.4% of Pertamina asphalt (60/70 penetration). Starbit E-55 converted level within hard-layered ACWC is 5.6%. The performance test result on immersion with variance of 1, 3, 5, 7 and 14 days shows that durability value of Starbit E-55 AC-WC has better performance. During the process, Starbit E-55 required 15.38% higher energy consumption.

The Influence of Coconut Shell as Coarse Aggregates in Asphalt Mixture

2016 ◽  
Vol 700 ◽  
pp. 227-237 ◽  
Author(s):  
Siti Nur Amiera Jeffry ◽  
Ramadhansyah Putra Jaya ◽  
Norhafizah Manap ◽  
Nurfatin Aqeela Miron ◽  
Norhidayah Abdul Hassan
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Indirect Tensile Strength ◽  
Coconut Shell ◽  
Engineering Properties ◽  
Modified Bitumen ◽  
Coarse Aggregates ◽  
Indirect Tensile

Significant quantities of coconut shell (CS), a by-product of agriculture, can be used as an artificial source of coarse aggregates. In this study, four CSs were used as coarse aggregates replacement in asphalt concrete with 0%, 10%, 20%, 30%, and 40% weight volumes. The particle sizes of the CSs used as main coarse aggregates range from 5 mm to 20 mm. The Marshall Stability test shows that the optimum bitumen content for asphalt mixtures is 5.1%. The engineering properties investigated include the volumetric, dynamic creep, indirect tensile strength, and resilient modulus. Test results show that stability decreases with increasing CS content because of high water absorption. Considering that CSs absorb bitumen, a further detailed investigation is needed to assess the performance of modified bitumen on mixture. Furthermore, the use of CSs as coarse aggregates in asphalt concrete help increase the resilient modulus, stiffness, and indirect tensile strength up to 30%. Generally, a 10% replacement of coarse aggregates with CSs is the optimal limit.

scholarly journals Effects of Using Limestone as a Filler and Starbit E-55 Asphalt as a Binder on the Performance of AC-WC Mixture

2019 ◽  
Vol 258 ◽  
pp. 04005
Author(s):  
Faizul Chasanah ◽  
Fajariesta Arta Putra
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Indirect Tensile Strength ◽  
Permeability Test ◽  
Second Stage ◽  
Performance Requirements ◽  
Indirect Tensile ◽  
Asphalt Content ◽  
Properties Of Materials ◽  
Last Stage

Asphalt concrete can be made through several methods including hot mix using Starbit E-55 asphalt as a binder and limestone as filler. This research aimed to determine the feasibility of the use of limestone as filler in AC-WC mixture and to identify the effects of limestone addition on the Marshall Characteristics, Durability, Indirect Tensile Strength (ITS), and Permeability. The first stage was to test the properties of materials consisting of aggregate, asphalt, and limestone. The second stage was to determine the optimum asphalt content with 0%, 25%, 50%, 75%, and 100% filler proportions, and the last stage was to conduct the Marshall, Immersion, ITS, and Permeability tests. The results showed that limestone has been in accordance with the performance requirements specified for a filler of AC-WC mixture using Starbit E-55 asphalt as a binder. There was a change in the Marshall characteristics of optimum asphalt content. The durability increased, and the ITS values of AC-WC mixture improved along with the increase in limestone proportion. However, the permeability test indicated that the mixture has a poor drainage feature towards water after variation in filler proportions was performed.

Preliminary Development of Indirect Tensile Tester Cooperated with Industrial Computered Tomography for Asphalt Mixture

2010 ◽  
Vol 168-170 ◽  
pp. 2654-2657
Author(s):  
Xiao Jun Li ◽  
Li Hua Jiang ◽  
Yun Xian Wang
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Hoop Stress ◽  
Asphalt Mixture ◽  
Cylindrical Sample ◽  
Vertical Stress ◽  
Test Results ◽  
Tensile Tester ◽  
Indirect Tensile ◽  
Mixture Sample

In this paper, a new Indirect tensile tester (IDT) which can be cooperated with Industrial Computered Tomography (IDT) is developed. The new tester uses a set of sliders to transfer the vertical stress to hoop stress which applied to a hollow cylindrical sample. The micro-crack will be appeared and propagated in the weakest direction of hollow cylindrical sample with the increase of vertical stress and tensile strength can calculated with the maximum vertical stress. Due to the existence of central slider, the stress state of hollow cylindrical sample will be kept even after unloading and the mixture sample would not have recovery when it is moved for scanning with ICT. The test results show that the combination of the developed ICT with IDT will help obtain more useful information on understanding the nature of asphalt concrete with different tensile damage stages.

scholarly journals Mechanical Properties of Crumb Rubber and Basalt Fiber Composite Modified Porous Asphalt Concrete with Steel Slag as Aggregate

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2552
Author(s):  
Chao Chai ◽  
Yongchun Cheng ◽  
Yuwei Zhang ◽  
Bing Zhu ◽  
Hang Liu
Keyword(s):  
Mechanical Properties ◽  
Asphalt Concrete ◽  
Steel Slag ◽  
Basalt Fiber ◽  
Crumb Rubber ◽  
Modified Bitumen ◽  
Porous Asphalt ◽  
Splitting Test ◽  
Porous Asphalt Concrete ◽  
Polymer Modified Bitumen

This paper studies the mechanical properties of porous asphalt concrete with styrene-butadiene-styrene (SBS) polymer modified bitumen as the binder, steel slag as the aggregate and crumb rubber and basalt fiber as modifiers. First, the appearance, mechanics, chemical composition and high-temperature stability of steel slag were studied by some equipment. Then, three kinds of porous asphalt concrete with SBS polymer modified bitumen as binder were produced, Namely, crumb rubber modified porous asphalt concrete (CR-PAC), basalt fiber modified porous asphalt concrete (BF-PAC), and basalt fiber and crumb rubber composite modified asphalt concrete (CM-PAC). Finally, the properties of the three kinds of modified PACs were studied through the Marshall test, freeze-thaw splitting test, low-temperature splitting test, permeability test, and creep test. The results showed that the crush value and abrasion value of steel slag are 15.1% and 13.5%, respectively; it has excellent strength and abrasion. In addition, the steel slag shows a porous structure and it provides an interface basis for a better bond with bitumen. For the three PACs, the results showed that the Marshall stability, water stability, and low-temperature crack resistance of CM-PAC are all the best Furthermore, CM-PAC has better rutting resistance than two single modified PACs, based on creep test results. The CM-PAC in this study can be used as a new type of pavement material.

scholarly journals Evaluation of the durability of asphalt concrete on polymer modified bitumen

2020 ◽  
Vol 164 ◽  
pp. 03027 ◽  
Author(s):  
Artur Onishchenko ◽  
Larysa Stolyarova ◽  
Andrii Bieliatynskyi ◽  
Natalia Samosudova
Keyword(s):  
Asphalt Concrete ◽  
Modified Bitumen ◽  
Polymer Modified Bitumen

scholarly journals Performance Evaluation of Modified Bitumen Using EPS Beads for Green and Sustainable Development of Polymer-Based Asphalt Mixtures

Proceedings ◽  
2020 ◽  
Vol 69 (1) ◽  
pp. 36
Author(s):  
Muhammad Kashif Anwar ◽  
Syyed Adnan Raheel Shah ◽  
Muhammad Ahmed Qurashi ◽  
Muhammad Hasnain Saeed ◽  
Aqsa Nisar ◽  
...  
Keyword(s):  
Asphalt Concrete ◽  
Expanded Polystyrene ◽  
Infrastructure Development ◽  
Modified Bitumen ◽  
Modified Asphalt ◽  
Different Types ◽  
Economic Infrastructure ◽  
The Stability ◽  
Marshall Stability ◽  
Polymer Modified Bitumen

The increasing costs of virgin content, decreasing resources, and growing plastic waste have shifted the research momentum towards green and sustainable road pavements. Hence, in recent years, various researchers have worked on the utilization of different types of plastic wastes in asphalt concrete by replacing it with binder content. Under this premise, this study examines the effect of expanded polystyrene beads (EPS) as a replacement to the binder at seven different dosages ranging from 5% to 50%. The bitumen of 60/70 grade was utilized in this study. The fresh properties of polymer-modified bitumen were checked and compared to that of conventional specimens. The mechanical properties of all specimens were investigated in terms of Marshall Stability properties. The results indicated that the adding of PEB improves the stability of modified asphalt concrete. Furthermore, the addition of EPS by substituting bitumen content could be a promising way to reduce the environmental impact of bitumen, and will also help in economic infrastructure development.

Use of steel slag aggregate in asphalt concrete mixes

2007 ◽  
Vol 34 (8) ◽  
pp. 902-911 ◽  
Author(s):  
Ibrahim M Asi ◽  
Hisham Y Qasrawi ◽  
Faisal I Shalabi
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Coarse Aggregate ◽  
Resilient Modulus ◽  
Steel Slag ◽  
Indirect Tensile Strength ◽  
Engineering Properties ◽  
Optimal Replacement ◽  
Indirect Tensile ◽  
Creep Modulus

There are three major steel-manufacturing factories in Jordan. All of their by-product, steel slag, is dumped randomly in open areas, causing many environmentally hazardous problems. This research was intended to study the effectiveness of using steel slag aggregate (SSA) in improving the engineering properties of locally produced asphalt concrete (AC) mixes. The research started by evaluating the toxicity and chemical and physical properties of the steel slag. Then 0%, 25%, 50%, 75%, and 100% of the limestone coarse aggregate in the AC mixes was replaced by SSA. The effectiveness of the SSA was judged by the improvement in indirect tensile strength, resilient modulus, rutting resistance, fatigue life, creep modulus, and stripping resistance of the AC samples. It was found that replacing up to 75% of the limestone coarse aggregate by SSA improved the mechanical properties of the AC mixes. The results also showed that the 25% replacement was the optimal replacement level. Key words: steel slag aggregate, asphalt concrete, Superpave, indirect tensile strength, fatigue, rutting, creep.

Sign in / Sign up

Export Citation Format

Share Document