scholarly journals ANTIEPILEPTIC RECTAL HYDROGEL LOADED WITH CARBAMAZEPINE – RICE BRAN WAX MICROSPHERES

2017 ◽  
Vol 10 (3) ◽  
pp. 264 ◽  
Author(s):  
Sreeja C Nair ◽  
Krishnapriya M ◽  
Karthika Ramesh
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Rice Bran ◽  
Ex Vivo ◽  
Rectal Mucosa ◽  
Natural Polymers ◽  
Rice Bran Wax ◽  
Release Pattern ◽  
Wide Range

ABSTRACTObjectives: The objective behind the study is to develop a mucoadhesive rectal hydrogel from carbamazepine (CBZ) – rice bran wax (RBW)microspheres for the purpose of controlled release for the treatment of epilepsy.Methods: The study was conducted to formulate controlled release rectal hydrogel loaded with CBZ – RBW microspheres in two different natural polymers,RBW and collagen which are prepared by modified cooling induced solidification method and gel preparation along with their evaluation studies.Results: A thorough analysis of the optimized gel revealed that all the evaluation parameters evaluated are within the acceptable limits. Further, theoptimized microsphere formulation (M5) was used to formulate it as rectal hydrogel using polymer collagen and was characterized. The mucoadhesiontime of 25% w/w collagen hydrogel (H4) was 565 minutes, allowing the loaded microspheres to be attached on rectal mucosa. In vitro drug releasefrom the mucoadhesive hydrogel formulations showed controlled drug release pattern with a maximum drug release of 96.45±0.35% for optimizedH4 formulation after 12 hr, followed zero order release pattern with diffusion mediated Higuchi model. Ex vivo permeation studies using bovine rectalmucosa revealed that H4 formulation showed greater permeability compared to control. Histopathological findings revealed that H4 formulation issafer for rectal administration without any signs of rectal irritancy. The stability studies of optimized formulation (H4) proved that hydrogel remainedstable over a wide range of temperature condition.Conclusion: Hence, the developed rectal hydrogel formulation seems to be a viable alternative to conventional drug delivery system for the effectivemanagement of epilepsy.Keywords: Carbamazepine, Rice bran wax, Rectal hydrogel, Sustainability.

scholarly journals DESIGN AND COMPARATIVE EVALUATION OF CLARITHROMYCIN GASTRIC BIOADHESIVE TABLETS BY EX VIVO AND IN VIVO METHODS

2018 ◽  
Vol 11 (4) ◽  
pp. 248
Author(s):  
Nishad Km ◽  
Arul B ◽  
Rajasekaran S
Keyword(s):  
Controlled Release ◽  
Imaging Technique ◽  
Ex Vivo ◽  
In Vitro Dissolution ◽  
Natural Polymers ◽  
Drug Bioavailability ◽  
X Ray ◽  
X Ray Imaging

 Objective: The present investigation was to formulate controlled release of mucoadhesive clarithromycin tablets using natural polymers.Methods: Tamarind seed polysaccharide obtained from Tamarindus indica and chitosan act as natural polymers. The formulated tablets of the combined form of thrombospondin (TSP) and chitosan were analyzed by in vitro dissolution method. The optimized formulations were selected for ex vivo and in vivo studies and compared with hydroxypropyl methylcellulose K100 polymer by evaluating gastric retention period by X-ray imaging technique, and drug bioavailability by a pharmacokinetic method from blood samples was determined by high-performance liquid chromatography-mass spectrometry method.Results: The gastric mucoadhesive tablets were prepared using chito-TSP polymers. The in vitro drug release showed good release character for 24 h. The ex vivo studies of tablets showed good adhesive property for a long time. The X-ray imaging technique also proved the adhesive character of tablets. From blood serum sample of rabbits, bioavailability of the drug is in according to the controlled release mechanism.Conclusion: The selected formulations were subjected to stability studies. The study concluded that combination of chitosan and TSP is best natural polymer for mucoadhesion by the advantages of controlled release and biodegradation.

scholarly journals Formulation development of oral controlled release tablets of hydralazine: Optimization of drug release and bioadhesive characteristics

2009 ◽  
Vol 59 (1) ◽  
pp. 1-13 ◽  
Author(s):  
Bhupinder Singh ◽  
Sonia Pahuja ◽  
Rishi Kapil ◽  
Naveen Ahuja
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Ex Vivo ◽  
Methyl Cellulose ◽  
Formulation Development ◽  
Drug Release Profile ◽  
Optimization Study ◽  
Hydralazine Hydrochloride ◽  
Controlled Release Tablets

Formulation development of oral controlled release tablets of hydralazine: Optimization of drug release and bioadhesive characteristicsThe current study involves development of oral bioadhesive hydrophilic matrices of hydralazine hydrochloride, and optimization of theirin vitrodrug release profile andex vivobioadhesion against porcine gastric mucosa. A 32central composite design was employed to systematically optimize the drug delivery formulations containing two polymers,viz., carbomer and hydroxypropyl methyl cellulose. Response surface plots were drawn and optimum formulations were selected by brute force searches. Validation of the formulation optimization study indicated a very high degree of prognostic ability. The study successfully undertook the development of an optimized once-a-day formulation of hydralazine with excellent bioadhesive and controlled release characteristics.

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

Formulation Development and Characterization of controlled release core in cup matrix tablets of venlafaxine HCl

2020 ◽  
Vol 15 ◽  
Author(s):  
Balaji Maddiboyina ◽  
Vikas Jhawat ◽  
Gandhi Sivaraman ◽  
Om Prakash Sunnapu ◽  
Ramya Krishna Nakkala ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Rate ◽  
Zero Order ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Hydrophobic Polymers

Background: Venlafaxine HCl is a selective serotonin reuptake inhibitor which is given in the treatment of depression. The delivery of the drug at a controlled rate can be of great importance for prolonged effect. Objective: The objective was to prepare and optimize the controlled release core in cup matrix tablet of venlafaxine HCl using the combination of hydrophilic and hydrophobic polymers to prolong the effect with rate controlled drug release. Methods: The controlled release core in cup matrix tablets of venlafaxine HCl were prepared using HPMC K5, K4, K15, HCO, IPA, aerosol, magnesium sterate, hydrogenated castor oil and micro crystalline cellulose PVOK-900 using wet granulation technique. Total ten formulations with varying concentrations of polymers were prepared and evaluated for different physicochemical parameters such FTIR analysis for drug identification, In-vitro drug dissolution study was performed to evaluate the amount of drug release in 24 hrs, drug release kinetics study was performed to fit the data in zero order, first order, Hixson–crowell and Higuchi equation to determine the mechanism of drug release and stability studies for 3 months as observed. Results: The results of hardness, thickness, weight variation, friability and drug content study were in acceptable range for all formulations. Based on the In vitro dissolution profile, formulation F-9 was considered to be the optimized extending the release of 98.32% of drug up to 24 hrs. The data fitting study showed that the optimized formulation followed the zero order release rate kinetics and also compared with innovator product (flavix XR) showed better drug release profile. Conclusion: The core-in-cup technology has a potential to control the release rate of freely water soluble drugs for single administration per day by optimization with combined use of hydrophilic and hydrophobic polymers.

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

2021 ◽  
pp. 088391152199784
Author(s):  
Loveleen Kaur ◽  
Ajay Kumar Thakur ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Drug Release ◽  
In Silico ◽  
Ex Vivo ◽  
Strong Interactions ◽  
Dissolution Time ◽  
Sem Images ◽  
In Vivo Evaluation ◽  
Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

scholarly journals Fabrication and In Vitro Evaluation of pH-Sensitive Polymeric Hydrogels as Controlled Release Carriers

Gels ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 110
Author(s):  
Muhammad Suhail ◽  
Chih-Wun Fang ◽  
Arshad Khan ◽  
Muhammad Usman Minhas ◽  
Pao-Chu Wu
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Acrylic Acid ◽  
Chondroitin Sulfate ◽  
Diclofenac Sodium ◽  
Research Work ◽  
Controlled Delivery ◽  
Scanning Calorimetry ◽  
Release Studies

The purpose of the current investigation was to develop chondroitin sulfate/carbopol-co-poly(acrylic acid) (CS/CBP-co-PAA) hydrogels for controlled delivery of diclofenac sodium (DS). Different concentrations of polymers chondroitin sulfate (CS), carbopol 934 (CBP), and monomer acrylic acid (AA) were cross-linked by ethylene glycol dimethylacrylate (EGDMA) in the presence of ammonium peroxodisulfate (APS) (initiator). The fabricated hydrogels were characterized for further experiments. Characterizations such as Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR) were conducted to understand the surface morphology, thermodynamic stability, crystallinity of the drug, ingredients, and developed hydrogels. The swelling and drug release studies were conducted at two different pH mediums (pH 1.2 and 7.4), and pH-dependent swelling and drug release was shown due to the presence of functional groups of both polymers and monomers; hence, greater swelling and drug release was observed at the higher pH (pH 7.4). The percent drug release of the developed system and commercially available product cataflam was compared and high controlled release of the drug from the developed system was observed at both low and high pH. The mechanism of drug release from the hydrogels followed Korsmeyer–Peppas model. Conclusively, the current research work demonstrated that the prepared hydrogel could be considered as a suitable candidate for controlled delivery of diclofenac sodium.

Formulation and Evaluation of Luliconazole Microsponges Loaded Gel for Topical Delivery

2021 ◽  
pp. 5775-5780
Author(s):  
Farhana Sultan ◽  
Himansu Chopra ◽  
Gyanendra Kumar Sharma
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Production Yield ◽  
In Vitro Drug Release ◽  
Eudragit Rs ◽  
Diffusion Studies

Microsponge containing Luliconazole (LCZ) with different proportion of drug:polymer (Ethyl cellulose and Eudragit RS 100) were obtained efficiently using Quasi-emulsion solvent diffusion method. Luliconazole is an anti-fungal drug used for the topical delivery. The purpose of the microsponge formulation is to control the release of LCZ drug to the skin through Microsponge Delivery System (MDS) known to be the novel technique which overcome the maximum concentration of active ingredient, frequency doses, and skin irritation. The prepared microsponges were examined using drug content, % production yield, % entrapment efficiency and in-vitro drug release. The formulation were subjected to in-vitro drug release studies for 6 hr in which it was concluded that Ethyl cellulose microsponges formulated by drug:polymer (1:1) and Eudragit RS 100 microsponges formulated by drug:polymer (1:3) showed maximum controlled release i.e., Increase in drug:polymer ratio (1:1 to 1:9) increased the production yield and entrapment efficiency of microsponges using Ethyl cellulose with no significant effect for Eudragit RS 100.Therefore, both formulation F1 and F2 was dispersed in carbopol gel preparation for controlled delivery of LCZ to the skin. Various physical parameters like pH, spreadability, viscosity and in-vitro drug diffusion studies were evaluated for the prepared gel formulations. Microsponge gel formulation i.e., FG1 showed better results for controlled release of 89.40% as compared to FG2 i.e., 92.18% over the period of 12 hrs which is performed in Franz Diffusion Cell. On basis of in-vitro diffusion studies for LCZ gel formulation, microsponges using Ethyl cellulose (FG1) was found to be best for its controlled release of LCZ for 12 hrs and followed zero order kinetics. Hence, formulated LCZ loaded gel have potential to treat fungal infections i.e., tinea pedis, tinea cruris and tinea corporis.

scholarly journals CHEMICAL MODIFICATION, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE POTENTIALITY OF ASSAM BORA RICE STARCH

2017 ◽  
Vol 9 (9) ◽  
pp. 132 ◽  
Author(s):  
Abdul Baquee Ahmed ◽  
Iman Bhaduri
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Chemical Modification ◽  
Ex Vivo ◽  
Rice Starch ◽  
Modified Starch ◽  
Native Starch ◽  
Ft Ir

Objective: The objective of the present study was to chemical modification, characterization and evaluation of mucoadhesive potentiality of Assam bora rice starch as potential excipients in the sustained release drug delivery system. Methods: The starch was isolated from Assam bora rice and esterified using thioglycolic acid and characterized by Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC) and Nuclear magnetic resonance (NMR). The 10% w/v gel formulation based on modified bora rice starch loaded with irinotecan (0.6%) was prepared and evaluated for various rheological properties, ex-vivo mucoadhesion using goat intestine and in vitro drug release study in phosphate buffer pH 6.8.Results: The chemical modification was confirmed by FT-IR and NMR studies with the presence of the peak at 2626.74 cm-1 and a singlet at 2.51 respectively due to–SH group. Ex-vivo mucoadhesion studies showed 6.6 fold increases in mucoadhesion of the modified starch with compared to native starch (46.3±6.79g for native starch; 308.7±95.31g for modified starch). In vitro study showed 89.12±0.84 % of drug release after 6 h in phosphate buffer pH 6.8 and the release kinetics followed Non-Fickian diffusion.Conclusion: The modified Assam bora rice starch enhanced a mucoadhesive property of the native starch and thus, can be explored in future as a potential excipient for the sustained release mucoadhesive drug delivery system.

Sign in / Sign up

Export Citation Format

Share Document