scholarly journals FORMULATION AND OPTIMIZATION OF BUOYANT IN SITU GELLING SYSTEM OF VALSARTAN USING NATURAL POLYMER

2017 ◽  
Vol 9 (10) ◽  
pp. 128
Author(s):  
S. Prasanthi ◽  
M. Vidyavathi
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Natural Polymer ◽  
Natural Polymers ◽  
Independent Variables ◽  
Drug Release Kinetics ◽  
Ftir Studies

Objective: Currently natural polymers have wide spread importance in fabrication of controlled drug delivery systems. Hence in this study ocimum basilicum mucilage, (OBM) a natural polymer used to know its effect as polymer alone and in combination with HPMC K15M and Guargum in oral in situ floating gel of Valsartan using 3 full level factorial design.Methods: FTIR studies conducted to know major drug polymer interactions. OBM, HPMC K15M and Guargum were chosen as three independent variables and examined at 3 levels for in vitro buoyancy (Y1) and drug release at 10 h (Y2) as responses. By using mathematical model approach formulation variables were quantitatively evaluated, and optimized formulation (VFIG) subjected for in vitro buoyancy, density, pH, in vitro drug release, drug content, gelling capacity and drug release kinetics. In addition VFIG studied for In vivo buoyancy and release kinetics.Results: FTIR studies revealed that excipients were compatible with drug. ANOVA results shown that independent variables have significant effect (p<0.05) on both the responses. Observed responses of optimized formulation (3 % OBM, 0.88 % HPMC and 1.25 % Guar gum) were in good agreement with the experimental values. Results of all in vitro evaluations lies within the limits and drug release kinetics followed non-fickian diffusion mechanism. In vivo buoyancy study in rabbit evidenced floatation for>8 h and in vivo pharmacokinetic study exhibited increased bioavailability of optimized formulation.Conclusion: Prepared VFIG with optimized concentrations of OBM, HPMC K15M and Guargum exploiting as a promising dosage form for enhanced gastric delivery.

scholarly journals Characterization and Compatibility Studies of Different Rate Retardant Polymer Loaded Microspheres by Solvent Evaporation Technique: In Vitro-In Vivo Study of Vildagliptin as a Model Drug

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Irin Dewan ◽  
Swarnali Islam ◽  
Md. Sohel Rana
Keyword(s):  
Drug Release ◽  
Promising Result ◽  
Release Kinetics ◽  
Type Ii Diabetes Mellitus ◽  
Solvent Evaporation ◽  
Ftir Studies ◽  
Evaporation Technique ◽  
Model Drug

The present study has been performed to microencapsulate the antidiabetic drug of Vildagliptin to get sustained release of drug. The attempt of this study was to formulate and evaluate the Vildagliptin loaded microspheres by emulsion solvent evaporation technique using different polymers like Eudragit RL100, Eudragit RS100, Ethyl cellulose, and Methocel K100M. In vitro dissolution studies were carried out in 0.1 N HCl for 8 hours according to USP paddle method. The maximum and minimum drug release were observed as 92.5% and 68.5% from microspheres, respectively, after 8 hours. Release kinetics were studied in different mathematical release models to find out the linear relationship and release rate of drug. The SEM, DSC, and FTIR studies have been done to confirm good spheres and smooth surface as well as interaction along with drug and polymer. In this experiment, it is difficult to explain the exact mechanism of drug release. But the drug might be released by both diffusion and erosion as the correlation coefficient (R2) best fitted with Korsmeyer model and release exponent (n) was 0.45–0.89. At last it can be concluded that all in vitro and in vivo experiments exhibited promising result to treat type II diabetes mellitus with Vildagliptin microspheres.

scholarly journals Disintegration, In vitro Dissolution, and Drug Release Kinetics Profiles of k-Carrageenan-based Nutraceutical Hard-shell Capsules Containing Salicylamide

2020 ◽  
Vol 18 (1) ◽  
pp. 226-231
Author(s):  
Pratiwi Pudjiastuti ◽  
Siti Wafiroh ◽  
Esti Hendradi ◽  
Handoko Darmokoesoemo ◽  
Muji Harsini ◽  
...  
Keyword(s):  
Drug Release ◽  
Rate Constant ◽  
Release Rate ◽  
Release Kinetics ◽  
Zero Order ◽  
Dissolution Profile ◽  
Natural Polymers ◽  
Drug Release Kinetics ◽  
Hard Shell

AbstractThe release of drugs from solid drug delivery materials has been studied intently in recent years. Quantitative analyses achieved from in vitro dissolution becomes easier if a zero-order mathematical model is used. Non-gelatin nutraceutical hard-shell capsules of zero size (approximately 0.7-0.8 cm) were produced from carrageenan-based natural polymers, namely carrageenan-alginate (CA) and carrageenan-starch (CS). Disintegration, dissolution and zero-order drug release kinetics of hard-shell capsules containing 100 mg of salicylamide were studied. The disintegration time of CA and CS were observed to be less than 30 min for both CA and CS. In vitro dissolution profile showed that the percentage dissolution of CA capsules was better at pH 4.5, while that of CS was poor at pH 1.2, 4.5 and 6.8. Determination of drug release kinetics profiles of carrageenan-based hardshell capsules utilized the Noyes-Whitney and Peppas-Sahlin modification rules for zero-order. The drug release from carrageenan-based capsules followed zero-order kinetics, especially at pH 6.8, and was compared to the Higuchi model. Salicylamide in CA hard-shell capsules at a pH 6.8 had a release rate constant (kH) of 2.91 %(ppm/ ppm) min-1/2, while the release rate constant of CS was 0.36 %(ppm/ppm) min-1.

scholarly journals Design and Development of Novel Dual-Compartment Capsule for Improved Gastroretention

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Ganesh B. Patil ◽  
Saurabh S. Singh ◽  
Ketan P. Ramani ◽  
Vivekanand K. Chatap ◽  
Prashant K. Deshmukh
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Release Kinetics ◽  
Research Work ◽  
Systemic Availability ◽  
Natural Polymer ◽  
Stability Studies ◽  
Natural Polymers ◽  
Capsule Shell

The aim of the proposed research work was to develop a novel dual-compartment capsule (NDCC) with polymeric disc for gastroretentive dosage form, which will ultimately result in better solubility and bioavailability of Ofloxacin. Floating ring caps were formulated by using different natural polymers, separating ring band and swellable polymer located at the bottom of capsule. Formulated ring caps were assessed for coating thickness, In vitro buoyancy, In vitro drug release, release kinetics and stability studies. Coating attained by the capsule shell was found to be 0.0643 mm. Depending on nature of natural polymer used, most of the formulations showed buoyancy for more than 9 hrs. Developed formulation demonstrated considerably higher drug release up to 9 hrs. The developed formulation FE2 depicted the drug release according to Korsmeyer-Peppas model. There was not any significant change in performance characteristics of developed ring caps after subjecting them to stability studies. The present study suggests that the use of NDCC for oral delivery of Ofloxacin could be an alternative to improve its systemic availability which could be regulated by the floating approach. The designed dosage system can have futuristic applications over payloads which require stomach-specific delivery.

Mesoporous Silica Nanoparticles of Hydroxyurea: Potential

2020 ◽  
Vol 10 ◽  
Author(s):  
Kumar Nishchaya ◽  
Swatantra K.S. Kushwaha ◽  
Awani Kumar Rai
Keyword(s):  
Drug Release ◽  
Silica Nanoparticles ◽  
Mesoporous Silica Nanoparticles ◽  
Release Kinetics ◽  
Average Particle Size ◽  
Silica Nanoparticle ◽  
Average Particle ◽  
Independent Variables ◽  
Lower Temperature

Background: Present malignant cancer medicines has the advancement of magnetic nanoparticles as delivery carriers to magnetically accumulate anticancer medication in malignant growth tissue. Aim: In the present investigation, a silica nanoparticles (MSNs) stacked with hydroxyurea were combined and was optimized for dependent and independent variables. Method: In this study, microporous silica nanoparticle stacked with neoplastic medication had been prepared through emulsification followed with solvent evaporation method. Prepared MSNs were optimized for dependent and independent variables. Different formulations were prepared with varying ratio of polymer, lipid and surfactant which affects drug release and kinetics of drug release pattern. The obtained MSNs were identified by FTIR, SEM, drug entrapment, in-vitro drug release, drug release kinetics study, stability testing in order to investigate the nanoparticle characteristics. Results: The percentage drug entrapment of the drug for the formulations F1, F2, F3, was found to be 27.78%, 65.52% and 48.26%. The average particle size for F2 formulation was found to be 520 nm through SEM. The cumulative drug release for the formulations F1, F2, F3 was found to be 64.17%, 71.82% and 32.68%. The formulations were found to be stable which gives controlled drug delivery for 6 hours. Conclusion: From the stability studies data it can be culminated that formulations are most stable when stored at lower temperature or in refrigerator i.e. 5˚C ± 3˚C. It can be concluded that MSN’s loaded with hydroxyurea is a promising approach towards the management of cancer due to its sustained release and less side effects.

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Sign in / Sign up

Export Citation Format

Share Document