scholarly journals OPTIMIZATION AND CHARACTERIZATION OF DOXORUBICIN LOADED SOLID LIPID NANOSUSPENSION FOR NOSE TO BRAIN DELIVERY USING DESIGN EXPERT SOFTWARE

2021 ◽  
pp. 45-57
Author(s):  
VIRAG A. SHAH ◽  
JAYVADAN K. PATEL
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
High Speed ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Brain Targeting ◽  
Solid Lipid ◽  
Stirring Time

Objective: The goal of the current study was to investigate the possible use of solid lipid nanosuspension (SLNs) as a drug delivery method to boost doxorubicin (DOX) brain-targeting performance after intranasal (i. n.) administration.  Methods: 33 factorial design was applied for optimization by using lipid concentration, surfactant concentration, and High-speed homogenizer (HSH) stirring time as dependent variables, and their effect was observed on particles size, Polydispersity index (PDI), and entrapment efficiency.  Results: With the composition of Compritol® 888 ATO (4.6 % w/v), tween 80 (1.9 % w/v), and HSH stirring time, the optimized formula DOX-SLNs prepared (10 min). Particle size, PDI, zeta potential, entrapment efficiency, percent in vitro release were found to be 167.47±6.09 nm, 0.23±0.02, 24.1 mV, 75.3±2.79, and 89.35±3.27 percent in 24 h, respectively, for optimized formulation (V-O). No major changes in particle size, zeta potential, and entrapping efficiency were found in the stability studies at 4±2 °C (refrigerator) and 25±2 °C/60±5% RH up to 3 mo.  Conclusion: Following the non-invasive nose-to-brain drug delivery, which is a promising therapeutic strategy, the positive findings confirmed the current optimized DOX-loaded SLNs formulation.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Design, Development and Evaluation Of Anti-Hypertensive Drug Solid Lipid Nano Particles

2021 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Wide Range

Recently, solid lipid Nano-particles have received much attention by the researchers owing to its biodegradability, biocompatibility and the ability to deliver a wide range of drugs. The aim of the present study was to design Diltiazem solid lipid Nano-particles and to evaluate them. Diltiazem solid lipid Nano-particles were prepared by hot homogenization technique using different lipids (Tristearin, GMS and Comprital), soy lecithin as stabilizers and tween 80, Poloxamer as surfactants. The Nano-particles were evaluated for particle size & PDI, zeta potential, entrapment efficiency and in vitro drug release. The particle size ranged from 49.7 to 523.7 nm. PDI of all formulations were good within the range of 0.189 to 0.427. The zeta potential ranged from -10.5 to -29.6 Mv, Entrapment efficiency of all formulations were observed was in the range of 78.68 to 95.23 %. The cumulative percentage release of Diltiazem from different Diltiazem Nano-particles varied from 53.36 to 88.74% depending upon the drug lipid ratio and the type of lipid used. The average percentage of drug released from different SLNs after 24 hours showed in the following order: F9 (53.35%) < F6 (56.75%) < F4 (61.74%) < F7 (63.8%) < F5(67.77%) < F8(69.04%) < F3(75.31%) < F1(79.36%) <F2 (88.74%) respectively. The release kinetic studies showed that the release was first order diffusion controlled and the n values obtained from the Korsmeyer-Peppa’s model indicated the release mechanism was Quasi-Fickian type (n-value of 0.47). Keywords: Diltiazem, solid lipid Nano-particles, FTIR, in vitro drug release.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF PIPER RETROFRACTUM EXTRACT LOADED MUCOADHESIVE NANOSTRUCTURED LIPID CARRIERS FOR TOPICAL ORAL DRUG DELIVERY

2017 ◽  
Vol 9 (9) ◽  
pp. 79
Author(s):  
Kavee Srichaivatana ◽  
Anan Ounaroon ◽  
Waree Tiyaboonchai
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
Oral Cavity ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Oral Drug ◽  
Drug Entrapment Efficiency ◽  
Piper Retrofractum

Objective: To develop and characterize Piper retrofractum extract loaded nanostructured lipid carriers (PRE loaded NLCs) for topical oral cavity administration to enhance bioavailability and stability of piperine.Methods: PRE loaded NLCs were prepared with a hot high-pressure homogenization technique followed by coating the particle surface with mucoadhesive polymers; polyethene glycol 400 (PEG) and polyvinyl alcohol (PVA). The physicochemical properties in terms of particle size, polydispersity index, zeta potential, drug entrapment efficiency, in vitro drug release profile and antimicrobial activities were examined. In vitro, mucoadhesion studies were assessed by the wash-off test. The physicochemical stabilities of mouth spray containing PRE loaded NLCs were investigated by kept at room temperature and 4 °C for 6 mo.Results: The PRE loaded NLCs showed spherical shape with a mean particle size of ~100-120 nm and zeta potential of ~-24 mV. Up to 90% drug entrapment efficiency was achieved. PEG-NLCs and PVA-NLCs showed a strong interaction with porcine buccal mucosa than uncoated-NLCs. All PRE loaded NLCs formulations revealed fast release characteristics and effective against Streptococcus mutans and S. sanguinis. The mouth spray containing PRE loaded NLCs showed good physical stability without particle aggregation. In addition, the chemical stability of piperine in NLCs was significantly improved during storage at both storage conditions compared to its solution form.Conclusion: The developed PRE loaded polymer coated-NLCs showed high potential to use as a local drug delivery system for reducing the bacterial growth in the oral cavity.

scholarly journals Nanostructured Lipid Carriers to Mediate Brain Delivery of Temazepam: Design and In Vivo Study

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 451 ◽  
Author(s):  
Nermin E. Eleraky ◽  
Mahmoud M. Omar ◽  
Hemat A. Mahmoud ◽  
Heba A. Abou-Taleb
Keyword(s):  
Drug Delivery ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Relative Bioavailability ◽  
Nanostructured Lipid Carriers ◽  
Brain Targeting ◽  
Pharmacokinetic Data ◽  
Average Size

The opposing effect of the blood–brain barrier against the delivery of most drugs warrants the need for an efficient brain targeted drug delivery system for the successful management of neurological disorders. Temazepam-loaded nanostructured lipid carriers (NLCs) have shown possibilities for enhancing bioavailability and brain targeting affinity after oral administration. This study aimed to investigate these properties for insomnia treatment. Temazepam-NLCs were prepared by the solvent injection method and optimized using a 42 full factorial design. The optimum formulation (NLC-1) consisted of; Compritol® 888 ATO (75 mg), oleic acid (25 mg), and Poloxamer® 407 (0.3 g), with an entrapment efficiency of 75.2 ± 0.1%. The average size, zeta potential, and polydispersity index were determined to be 306.6 ± 49.6 nm, −10.2 ± 0.3 mV, and 0.09 ± 0.10, respectively. Moreover, an in vitro release study showed that the optimized temazepam NLC-1 formulation had a sustained release profile. Scintigraphy images showed evident improvement in brain uptake for the oral 99mTc-temazepam NLC-1 formulation versus the 99mTc-temazepam suspension. Pharmacokinetic data revealed a significant increase in the relative bioavailability of 99mTc-temazepam NLC-1 formulation (292.7%), compared to that of oral 99mTc-temazepam suspension. Besides, the NLC formulation exhibited a distinct targeting affinity to rat brain. In conclusion, our results indicate that the developed temazepam NLC formulation can be considered as a potential nanocarrier for brain-mediated drug delivery in the out-patient management of insomnia.

scholarly journals Preparation, In Vitro characterization and stability studies of ropinirole lipid nanoparticles enriched hydrogel for treatment of neurodegeneration diseases

2021 ◽  
Vol 11 (2-S) ◽  
pp. 66-75
Author(s):  
Kumara Swamy Samanthula ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid ◽  
Release Studies ◽  
Vitro Release

Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that might improve efficacy in PD treatment. RP nanoparticles were prepared by homogenization aided probe sonication method and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), assay, entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h and were stable over three months at 4ºC and 25ºC storage conditions. Keywords: Parkinson’s disease, Ropinirole, Solid lipid nanoparticles, Nanostructured lipid carriers, Hydrogel.

scholarly journals ZOLMITRIPTAN BRAIN TARGETING VIA INTRANASAL ROUTE USING SOLID LIPID NANOPARTICLES FOR MIGRAINE THERAPY: FORMULATION, CHARACTERIZATION, IN-VITRO AND IN-VIVO ASSESSMENT

2020 ◽  
pp. 86-93 ◽  
Author(s):  
DALIA A. ELATY MOSTAFA ◽  
MAHA K. A. KHALIFA ◽  
SAMEH. S. GAD
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Histopathological Study ◽  
Solid Lipid ◽  
The Brain

Objective: Zolmitriptan, a class of antidepressant drugs with poor bioavailability due to its first-pass metabolism. The aim of this study was to improve systemic bioavailability and explore the brain targeting impact of nasal Zolmitriptan (Zol) solid lipid nanoparticles (SLNs) gel for migraine treatment.  Methods: Stearic acid and cholesterol used as solid lipid and lecithin as a surfactant, emulsion solvent evaporation technique was used to produce Zolmitriptan SLNs. (Zol) SLNs were characterized for particle size, percent entrapment efficiency and in vitro drug release. Formula S6 showed greater percent entrapment efficiency (PEE), adequate particle size and sustained drug release behavior. Formula S6 was integrated into HPMC gel (3%) to prepare nasal gel. Zol SLN nasal gel was subjected to histopathological study to ensure brain targeting.  Results: It was observed that all prepared Zol SLNs were in the nano-sized range with a polydispersity index of<0.5. In the cholesterol/lecithin combination, higher PEE%, better stability, and less agglomeration inclination were discovered. Results of the release profiles showed that developed Zol-SLNs were able to release Zolmitriptan in a sustained manner. Histopathological study of the brain tissues showed that Zolmitriptan SLN nasal gel can reach brain cells and localized for 24 h although the hydrophobicity of the target drug. Conclusion: Intranasal administration of Solid lipid nanostructure of Zolmitriptan through the olfactory pathway in which it travels from the nasal cavity to brain tissue achieved drug targeting potential of about 90% compared with conventional Zolmitriptan tablets. The small particle size helped them to squeeze themselves through the small opening in the olfactory neurons to the brain via different endo-cystic pathways of neuronal cells in nasal tissue membranes.

scholarly journals DEVELOPMENT AND IN-VITRO CHARACTERISATION OF CHITOSAN LOADED PACLITAXEL NANOPARTICLE

2016 ◽  
Vol 9 (9) ◽  
pp. 145 ◽  
Author(s):  
Tumpa Sarkar ◽  
Abdul Baquee Ahmed
Keyword(s):  
Particle Size ◽  
High Speed ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Ionic Crosslinking ◽  
Glutaraldehyde Solution ◽  
Drug Entrapment Efficiency ◽  
Vitro Release

ABSTRACTObjectives: To meet the above aim the following objectives are undertaken: (1) Preparation of paclitaxel (PTX) loaded nanoparticles by differenttechniques, (2) In-vitro evaluations of the drug loaded nanoparticles and selection of optimized batch.Methods: PTX loaded chitosan nanoparticles were prepared by Ionic-crosslinking technique. In this technique, chitosan was dissolved in 0.25%v/vacetic acid solution. To this above solution 0.84%v/v, glutaraldehyde solution was added dropwise under high-speed homogenizer at 17000 rpm for1 hr.Result: Particle size of prepared nanoparticle formulations was found to be 345.175±5.66-815.125±8.355 nm with low PDI between 0.456. Themaximum entrapment of drug was found to be 88.57±2.533% with formulation F5. In-vitro release studies of the F5 formulation showed 57.8±1.735%release of drug after 24 hrs.Conclusion: The prepared nanoparticles were evaluated for its particle size, zeta potential, drug entrapment efficiency, in-vitro drug release study,and surface morphology studies by scanning electron microscopy. The results of Fourier transform infrared studies of 1:1 physical mixture of drug andexcipients confirmed the absence of incompatibility. Thus, the study concludes that PTX loaded nanoparticles were developed successfully by ioniccrosslinking method, which is expected to enhance the oral bioavailability of PTX.Keywords: Paclitaxel, Nanoparticles, Chitosan, Ionic-crosslinking, In-vitro release.

Research: Design, development and optimization of ramipril solid lipid nanoparticles using solvent emulsification and evaporation method

2019 ◽  
Vol 09 ◽  
Author(s):  
Rohan R. Vakhariya ◽  
Vijay R. Salunkhe ◽  
Dheeraj S. Randive ◽  
Mangesh A. Bhutkar ◽  
Somnath D. Bhinge
Keyword(s):  
Particle Size ◽  
Side Effects ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Evaporation Method ◽  
Solid Lipid ◽  
Particle Size Analyzer

Background: Ramipril, an antihypertensive drug exhibit 28% of oral bioavailability and also expelled quickly through the kidneys. Moreover, numerous side effects reported by the ramipril such as, hypotension (postural), increasing potassium level, and angioedema, when presented as an immediate dosage form. Hence, to conquer the side-effects associated with the drug and to increase its bioavailability. Objective: The intention of the proposed approach was to design, develop and optimize Ramipril loaded solid lipid nanoparticles. Methods: Solvent emulsification and evaporation method were employed to prepare Ramipril loaded solid lipid nanoparticles containign stearic acid and phosphatidylcholine as a lipid and surfactant respectively. The prepared formulations have been confirmed with particle size analyzer, %entrapment efficiency, Zeta Potential, SEM, X-ray diffraction study, FTIR, NMR spectroscopy, in-vitro release study and stability study. Result: The obtained results were noted to be within the standard limits. No interaction between Ramipril and other excipients, were confirmed with the FT-IR study of the formulations. Particle size analyzer confirmed that the nanometer size of prepared formulations ranges between 200-350nm. Percent entrapment efficiency was observed in the range of 70.61–91.60%. Entrapment and particle size results of the nanoparticles from R5 batch was an adjudged. The designed formulation noted 70.50% cumulative drug release within a period of 7hrs. The designed batch showed mean of zeta potential at-29.4 mV exhibiting good stability of formulation. Conclusion: The developed formulation was found to be stable and safe, and represents a promising system for the sustained and controlled delivery of Ramipril.

Sign in / Sign up

Export Citation Format

Share Document