scholarly journals Experimental Analysis on Use of Polypropylene in Concrete

2021 ◽  
Vol 9 (VII) ◽  
pp. 2290-2292
Author(s):  
Prof. Bhavana V. Chavan
Keyword(s):  
Polypropylene Fiber ◽  
Solid Polymer ◽  
Polypropylene Fibers ◽  
Self Compacting Concrete ◽  
Rigid Pavement ◽  
Concrete Mix Design ◽  
Optimum Weight ◽  
The Many ◽  
Wide Assortment ◽  
Warm Clothing

Polypropylene may be a thermoplastic polymer utilized as a neighborhood of wide assortment of uses including bundling, materials (e.g., ropes, warm clothing and covers). Polymer cement may be a piece of gathering of cements that utilizes polymers to supplement bond as a canopy. Impregnated solid, polymer cement, and Polymer-Portland-bond concrete are the sorts incorporate polymers. To realize maximum strength of concrete by using optimum weight of polypropylene fibers is the aim of the study. Fiber ferroconcrete is employed during a sort of engineering applications due to its satisfactory and outstanding performance within the industry and construction field. Polypropylene fiber in concrete mix design is used for multiple purposes that include rigid pavement, self- compacting concrete and other applications. 40 cylinders of polypropylene concrete were casted and tested for 7 and 28 days’ strength for both compressive and split lastingness. It was concluded that the many improvement was observed in ultimate compressive strength after 7 and 28 days. The optimum percentage of Polypropylene fiber was obtained to be 5 percent of cement by volume. The addition of bit of polypropylene improved the mechanical properties of concrete.

scholarly journals Influence of polypropylene fiber on early strength of self-compacting concrete

2019 ◽  
Vol 258 ◽  
pp. 01020
Author(s):  
Rahmi Karolina ◽  
Abdiansyah Putra Siregar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Self Compacting Concrete ◽  
Concrete Technology ◽  
Early Strength

One of the development of concrete technology in construction’s world is Self-Compacting Concrete. Self-Compacting Concrete (SCC) is an innovative concrete that able to “flow” and condensed by gravity and its own weight with little vibration or even without a vibration device at all. However, these concrete still have deficiencies like general concrete that is weak to tensile. To increase the tensile strength of the concrete is by adding fiber into the mix. One type of fiber that can be used as an additive to the mix is Polypropylene fibers. This study aims to determine the effect of adding polypropylene fibers to the mechanical properties and characteristics of SCC concrete and to know the optimal polypropylene fiber content in the manufacture of Self Compacting Concrete. Fiber addition variations are 0 kg / m3; 0.25 kg / m3; 0.5 kg / m3 and 0.75 kg / m3. The result of the research showed that the variation of 0.5 kg / m3 and 0.75 kg / m3 addition of fibers didn’t fulfill the requirements to be categorized as a SCC concrete. The results of hard concrete test showed the highest compressive strength that is on the SCC PP concrete of 22.31 MPa at the age of 1 day and 46.24 at the age of 28 days. The highest strength is on the SCC 0.25 PP concrete of 6.52 MPa at the age of 1 day and 10.07 at the age of 28 days. The highest flexural strength is on the SCC 0.25 PP concrete of 6.76 at the age of 1 day and 8.60 at the age of 28 days.

scholarly journals FRESH AND MECHANICAL CHARACTERISTICS OF SELF-COMPACTING POLYPROPYLENE FIBER CONCRETE INCORPORATED WITH KAOLIN

SINERGI ◽  
2020 ◽  
Vol 24 (3) ◽  
pp. 223
Author(s):  
Hakas Prayuda ◽  
Berkat Cipta Zega ◽  
Fanny Monika ◽  
Fadillawaty Saleh ◽  
Martyana Dwi Cahyati
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Concrete Beam ◽  
Polypropylene Fiber ◽  
Polypropylene Fibers ◽  
Flexural Test ◽  
Self Compacting Concrete ◽  
Additional Material ◽  
Fiber Concrete

Self Compacting Concrete (SCC) is concrete with high fluidity so that it can flow and fill the spaces in the mold without the compaction process. This study discusses the effect of the adding of kaolin and polypropylene fibers in order to increase the flowability, compressive strength, flexural strength, and tensile strength in self-compacting concrete. The additional material of kaolin was 5%, 10%, and 15% of the cement weight. The polypropylene fibers were 1%, 1.5%, and 2%. The flowability test, which was used, was Table flow, V-Funnel, and L-Box. Compressive strength testing was conducted when the concrete was 7, 14, and 28 days old. The flexural test was performed with a measurement of 150 x 150 x 600 mm as many as 18 specimens tested at the age of 28 days. The results showed that the addition of kaolin and polypropylene fibers met the flowability specifications of self-compacting concrete. The addition of polypropylene can increase the flexural strength and tensile strength of the concrete beam, but cannot increase the compressive strength of self-compacting concrete.

scholarly journals Effect of Elevated Temperatures and Thermal Cycles on Self Compacting Concrete Reinforced with Polypropylene Fibers

2020 ◽  
Vol 9 (3) ◽  
pp. 948-951
Keyword(s):  
Flexural Strength ◽  
Radiation Exposure ◽  
Weight Reduction ◽  
Elevated Temperatures ◽  
Polypropylene Fiber ◽  
Mineral Admixture ◽  
Polypropylene Fibers ◽  
Thermal Cycles ◽  
Self Compacting Concrete ◽  
Cold Temperatures

SCC has been widely adopted in the various applications. Addition of fibers to SCC has shown to increase the strength and concrete durable. Concrete structures are subjected to intense solar radiations and alternating temperatures throughout their lifetime right from the time of casting. The variation in the properties of concrete due to this radiation exposure and thermal cycles of alternating hot and cold temperatures needs to be investigated. The current study presents an investigation on compressive and flexural strength as well as weight reduction in polypropylene fiber reinforced SCC at 100oC thermal cycles of 7, 14 and 28 days. Two mixes of concrete namely normal SCC and SCC with mineral admixture (10% silica fume) are considered. Strength is observed to improve with an increase in thermal cycles while the weight is found to reduce.

scholarly journals Multi-Scale Study of The Small-Strain Damping Ratio of Fiber-Sand Composites

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2476
Author(s):  
Haiwen Li ◽  
Sathwik S. Kasyap ◽  
Kostas Senetakis
Keyword(s):  
Dynamic Properties ◽  
Wide Spectrum ◽  
Damping Ratio ◽  
Polypropylene Fiber ◽  
Small Strain ◽  
Treatment Method ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Test Results ◽  
Fiber Reinforced

The use of polypropylene fibers as a geosynthetic in infrastructures is a promising ground treatment method with applications in the enhancement of the bearing capacity of foundations, slope rehabilitation, strengthening of backfills, as well as the improvement of the seismic behavior of geo-systems. Despite the large number of studies published in the literature investigating the properties of fiber-reinforced soils, less attention has been given in the evaluation of the dynamic properties of these composites, especially in examining damping characteristics and the influence of fiber inclusion and content. In the present study, the effect of polypropylene fiber inclusion on the small-strain damping ratio of sands with different gradations and various particle shapes was investigated through resonant column (macroscopic) experiments. The macroscopic test results suggested that the damping ratio of the mixtures tended to increase with increasing fiber content. Accordingly, a new expression was proposed which considers the influence of fiber content in the estimation of the small-strain damping of polypropylene fiber-sand mixtures and it can be complementary of damping modeling from small-to-medium strains based on previously developed expressions in the regime of medium strains. Additional insights were attempted to be obtained on the energy dissipation and contribution of fibers of these composite materials by performing grain-scale tests which further supported the macroscopic experimental test results. It was also attempted to interpret, based on the grain-scale tests results, the influence of fiber inclusion in a wide spectrum of properties for fiber-reinforced sands providing some general inferences on the contribution of polypropylene fibers on the constitutive behavior of granular materials.

Effects of Two Polypropylene Fibers on the Properties of High Strength Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1328-1331
Author(s):  
Bai Rui Zhou ◽  
Dong Dong Han ◽  
Jian Hua Yang ◽  
Yi Liang Peng ◽  
Guo Xin Li
Keyword(s):  
Portland Cement ◽  
Modulus Of Elasticity ◽  
High Strength Concrete ◽  
Polypropylene Fiber ◽  
High Strength ◽  
Polypropylene Fibers ◽  
Strength Concrete ◽  
Reticular Fiber ◽  
Binder Ratio ◽  
Water To Binder Ratio

Portland cement, crushed stone, sand and superplasticizer were used to obtain a high strength concrete with a low water to binder ratio. A reticular polypropylene fiber and a single polypropylene fiber were used to improve the strength of the high strength concrete, but the effects of the two fibers on the slump and strengths were quite different. The reasons of the differences were the surface area and the modulus of elasticity of the fibers. The results show the reticular fiber was better to used in high strength concretes.

scholarly journals Effect of randomly distributed polypropylene fiber reinforcement on the shear behavior of sandy soil

2019 ◽  
Vol 41 (3) ◽  
pp. 151-159
Author(s):  
Mehdi Missoum Benziane ◽  
Noureddine Della ◽  
Sidali Denine ◽  
Sedat Sert ◽  
Said Nouri
Keyword(s):  
Sandy Soil ◽  
Mechanical Characteristics ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Normal Stresses ◽  
Efficient Manner ◽  
Cost Efficient ◽  
Shear Box ◽  
Loose Medium

AbstractThe inclusions of geosynthetic materials (fibers, geomembranes and geotextiles) is a new improvement technique that ensures uniformity in the soil during construction. The use of tension resisting discreet inclusions like polypropylene fibers has attracted a significant amount of attention these past years in the improvement of soil performance in a cost-efficient manner. A series of direct shear box tests were conducted on unreinforced and reinforced Chlef sand with different contents of fibers (0, 0.25, 0.5 and0.75%) in order to study the mechanical behavior of sand reinforced with polypropylene fibers. Samples were prepared at three different relative densities 30%, 50% and 80% representing loose, medium dense and dense states,respectively, and performed at normal stresses of 50, 100 and 200 kPa. The experimental results show that the mechanical characteristics are improved with the addition of polypropylene fibers. The inclusion of randomly distributed fibers has a significant effect on the shear strength and dilation of sandy soil. The increase in strength is a function of fiber content, where it has been shown that the mechanical characteristics improve with the increase in fiber content up to 0.75%, this improvement is more significant at a higher normal stress and relative density.

scholarly journals Characteristics of Recycled Polypropylene Fibers as an Addition to Concrete Fabrication Based on Portland Cement

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1827 ◽  
Author(s):  
Marcin Małek ◽  
Mateusz Jackowski ◽  
Waldemar Łasica ◽  
Marta Kadela
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Polypropylene Fibers ◽  
Split Tensile Strength ◽  
Recycled Polypropylene ◽  
Recycled Fibers

High-performance concrete has low tensile strength and brittle failure. In order to improve these properties of unreinforced concrete, the effects of adding recycled polypropylene fibers on the mechanical properties of concrete were investigated. The polypropylene fibers used were made from recycled plastic packaging for environmental reasons (long degradation time). The compressive, flexural and split tensile strengths after 1, 7, 14 and 28 days were tested. Moreover, the initial and final binding times were determined. This experimental work has included three different contents (0.5, 1.0 and 1.5 wt.% of cement) for two types of recycled polypropylene fibers. The addition of fibers improves the properties of concrete. The highest values of mechanical properties were obtained for concrete with 1.0% of polypropylene fibers for each type of fiber. The obtained effect of an increase in mechanical properties with the addition of recycled fibers compared to unreinforced concrete is unexpected and unparalleled for polypropylene fiber-reinforced concrete (69.7% and 39.4% increase in compressive strength for green polypropylene fiber (PPG) and white polypropylene fiber (PPW) respectively, 276.0% and 162.4% increase in flexural strength for PPG and PPW respectively, and 269.4% and 254.2% increase in split tensile strength for PPG and PPW respectively).

The Effect of Polypropylene Fiber on the Mechanical Properties of Self-Compacting Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 1325-1329
Author(s):  
Ye Ran Zhu ◽  
Jun Cai ◽  
Dong Wang ◽  
Guo Hong Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Flexural Properties ◽  
Test Results ◽  
Self Compacting Concrete ◽  
Bending Tests ◽  
Flexural Toughness ◽  
Four Point Bending

This paper investigates the mechanical properties (compressive strength, splitting tensile strength and flexural toughness) of polypropylene fiber reinforced self-compacting concrete (PFRSCC). The effect of the incorporation of polypropylene fiber on the mechanical properties of PFRSCC is determined. Four point bending tests on beam specimens were performed to evaluate the flexural properties of PFRSCC. Test results indicate that flexural toughness and ductility are remarkably improved by the addition of polypropylene fiber.

Sign in / Sign up

Export Citation Format

Share Document