scholarly journals Global Assesment of Interparticle Separation Distance on Low Cement Content Paste Mixtures

2020 ◽  
Author(s):  
Gonzalo Lozano Rengifo
CICTP 2020 ◽  
2020 ◽  
Author(s):  
Junchen Ma ◽  
Chunyu Liang ◽  
Ying Wang ◽  
Lidong Zhang ◽  
Weiwu Cui ◽  
...  

2010 ◽  
Vol 7 (2) ◽  
pp. 57
Author(s):  
Jamaludin Kasim ◽  
Shaikh Abdul Karim Yamani ◽  
Ahmad Firdaus Mat Hedzir ◽  
Ahmad Syafiq Badrul Hisham ◽  
Mohd Arif Fikri Mohamad Adnan

An experimental investigation was performed to evaluate the properties of cement-bonded particleboard made from Sesendok wood. The target board density was set at a standard 1200 kg m". The effect offarticle size, wood to cement ratio and the addition ofsodium silicate and aluminium silicate on the wood cement board properties has been evaluated. A change ofparticle size from 1.0 mm to 2.0 mm has a significant effect on the mechanical properties, however the physical properties deteriorate. Increasing the wood to cement ratio from 1:2.25 to 1:3 decreases the modulus ofrupture (MOR) by 11% and the addition ofsodium silicate improves valuesfurther by about 28% compared to the addition ofaluminum silicate. The modulus ofelasticity (MOE) in general increases with increasing cement content, but is not significantly affected by the addition ofsodium silicate or aluminium silicate, although the addition of their mixture (sodium silicate andaluminium silicate) consistentlyyields greater MOE values. Water absorption and thickness swelling is significantly affected by the inclusion ofadditives and better values are attained using higher wood to cement ratios.


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 675
Author(s):  
H. Nilanthi Padmini ◽  
Mojtaba Rajabi ◽  
Sergij V. Shiyanovskii ◽  
Oleg D. Lavrentovich

Spatially-varying director fields have become an important part of research and development in liquid crystals. Characterization of the anchoring strength associated with a spatially-varying director is difficult, since the methods developed for a uniform alignment are seldom applicable. Here we characterize the strength of azimuthal surface anchoring produced by the photoalignment technique based on plasmonic metamsaks. The measurements used photopatterned arrays of topological point defects of strength +1 and −1 in thin layers of a nematic liquid crystal. The integer-strength defects split into pairs of half-integer defects with lower elastic energy. The separation distance between the split pair is limited by the azimuthal surface anchoring, which allows one to determine the strength of the latter. The strength of the azimuthal anchoring is proportional to the UV exposure time during the photoalignment of the azobenzene layer.


Author(s):  
Roberto A. Sussman ◽  
Eliana Golberstein ◽  
Riccardo Polosa

We discuss the implications of possible contagion of COVID-19 through e-cigarette aerosol (ECA) for prevention and mitigation strategies during the current pandemic. This is a relevant issue when millions of vapers (and smokers) must remain under indoor confinement and/or share public outdoor spaces with non-users. The fact that the respiratory flow associated with vaping is visible (as opposed to other respiratory activities) clearly delineates a safety distance of 1–2 m along the exhaled jet to prevent direct exposure. Vaping is a relatively infrequent and intermittent respiratory activity for which we infer a mean emission rate of 79.82 droplets per puff (6–200, standard deviation 74.66) comparable to mouth breathing, it adds into shared indoor spaces (home and restaurant scenarios) a 1% extra risk of indirect COVID-19 contagion with respect to a “control case” of existing unavoidable risk from continuous breathing. As a comparative reference, this added relative risk increases to 44–176% for speaking 6–24 min per hour and 260% for coughing every 2 min. Mechanical ventilation decreases absolute emission levels but keeps the same relative risks. As long as direct exposure to the visible exhaled jet is avoided, wearing of face masks effectively protects bystanders and keeps risk estimates very low. As a consequence, protection from possible COVID-19 contagion through vaping emissions does not require extra interventions besides the standard recommendations to the general population: keeping a social separation distance of 2 m and wearing of face masks.


Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 289
Author(s):  
Petr Hauschwitz ◽  
Jan Brajer ◽  
Danijela Rostohar ◽  
Jaromír Kopeček ◽  
Tomáš Mocek ◽  
...  

Reflectivity and surface topography of tempered glass were modified without any thermal damage to the surroundings by utilizing 1.7 ps ultrashort pulsed laser on its fundamental wavelength of 1030 nm. To speed up the fabrication, a dynamic beam shaping unit combined with a galvanometer scanning head was applied to divide the initial laser beam into a matrix of beamlets with adjustable beamlets number and separation distance. By tuning the laser and processing parameters, reflected intensity can be reduced up to 75% while maintaining 90% of transparency thus showing great potential for display functionalization of mobile phones or laptops.


2021 ◽  
Author(s):  
Yu Wang ◽  
Lesley Gibson ◽  
Mohamed Beshir ◽  
David Rush

AbstractApproximately one billion people across the globe are living in informal settlements with a large potential fire risk. Due to the high dwelling density, a single informal settlement dwelling fire may result in a very serious fire disaster leaving thousands of people homeless. In this work, a simple physics-based theoretical model was employed to assess the critical fire separation distance between dwellings. The heat flux and ejected flame length were obtained from a full-scale dwelling tests with ISO 9705 dimension (3.6 m × 2.4 m × 2.4 m) to estimate the radiation decay coefficient of the radiation heat flux away from the open door. The ignition potential of combustible materials in adjacent dwellings are analyzed based on the critical heat flux from cone calorimeter tests. To verify the critical distance in real informal settlement fire, a parallel method using aerial photography within geographic information systems (GIS), was employed to determine the critical separation distances in four real informal settlement fires of 2014–2015 in Masiphumelele, Cape Town, South Africa. The fire-spread distances were obtained as well through the real fires. The probabilistic analysis was conducted by Weibull distribution and logistic regression, and the corresponding separation distances were given with different fire spread probabilities. From the experiments with the assumption of no interventions and open doors and windows, it was established that the heat flux would decay from around 36 kW/m2 within a distance of 1.0 m to a value smaller than 5 kW/m2 at a distance of 4.0 m. Both experiments and GIS results agree well and suggest the ignition probabilities at distances of 1.0 m, 2.0 m and 3.0 m are 97%, 52% and 5% respectively. While wind is not explicitly considered in the work, it is implicit within the GIS analyses of fire spread risk, therefore, it is reasonable to say that there is a relatively low fire spread risk at distances greater than 3 m. The distance of 1.0 m in GIS is verified to well and conservatively predict the fire spread risk in the informal settlements.


Sign in / Sign up

Export Citation Format

Share Document