scholarly journals PENGARUH PEMBERIAN PERAWATAN STEAM CURING TERHADAP KEKUATAN DAN DURABILITAS BETON DENGAN SEMEN POZZOLAN (EFFECT OF STEAM CURING ON STRENGTH AND DURABILITY CONCRETE WITH CEMENT POZZOLAN)

2013 ◽  
Vol 9 (2) ◽  
Author(s):  
Erwin Rommel
Keyword(s):  
Compressive Strength ◽  
Fast Food ◽  
High Strength Concrete ◽  
Precast Concrete ◽  
High Strength ◽  
Steam Curing ◽  
Strength Concrete ◽  
Concrete Production ◽  
Porosity And Permeability ◽  
Cement Strength

The use of concrete as a building material has been developed both in quantity and qualityaspects. Concrete production time is long term in a foundry to make many breakthroughs to makea concrete material that fast food, such as precast concrete. The use of precast concrete in the areaof an aggressive environment than expected strength factors are also needed high durability,including resistance to porosity and permeability properties of concrete.This research was conducted with the cooperation of one of Precast Concrete Factory in EastJava, including the manufacture of 15x15x15 cm cube of concrete and steam curing system.Thisvariable on research ; use the type of cement (pozzolan cement and cement type-1), the length ofsteam (5 and 7 hours), and the quality concrete (K350 and K700). As for the testing performed oncompressive strength, permeability and porosity of concrete.This study concluded that steam curing system to provide early strength concrete that isbetter than conventional curing (non-steam), where compressive strength of the post-steam canreach 51% of high-strength concrete (K700) with the results 361 kg/cm2, whereas in normalconcrete (K350) reached 52% (compressive strength 192 kg/cm2). Pozzolan cement concrete alsohas the advantage in increasing the durability of concrete, especially in high-strength concrete,where the concrete porosity becomes smaller either by steam curing and non-steam. Permeabilityof concrete is given a steam becomes smaller than the normal concrete with conventional curing(non-steam).Key word : steam curing, pozzolan cement, strength of concrete

Design of High-Strength Concrete for Ready-Mixed Concrete Production

2021 ◽  
Vol 325 ◽  
pp. 113-118
Author(s):  
Martin Ťažký ◽  
Klára Křížová
Keyword(s):  
Compressive Strength ◽  
Construction Industry ◽  
High Strength Concrete ◽  
High Strength ◽  
Cement Composite ◽  
Cement Composites ◽  
Strength Concrete ◽  
High Rise ◽  
Concrete Production ◽  
Ready Mixed Concrete

The high-strength concrete is a cement composite reaching high compressive strength, namely, pursuant to the legislation, higher than 60 MPa in the terms of cube compressive strength. The development of high-strength concretes exceeding 100 MPa is still an up-to-date issue and the production of these concretes is still limited only to a prefabrication. Contemporary construction industry and projecting activity have begun to focus on a construction of statically demanding buildings, which can include e.g. high-rise buildings. Such projecting often requires using of the state-of-the-art materials like cement composites with high mechanical parameters for construction of more subtle buildings. Within this article, the procedure of ready-mixed concretes development with the compressive strength around 100 MPa designed according to a project documentation for actual construction of high-rise building with the height up to 160 meters and 46 floors is described, together with the influence of the aggregate on the resulting composite strength.

scholarly journals Curing Effects on High-Strength Concrete Properties

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Afaf M. O. Wedatalla ◽  
Yanmin Jia ◽  
Abubaker A. M. Ahmed
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Chloride Diffusion ◽  
Steam Curing ◽  
Curing Conditions ◽  
Strength Concrete ◽  
Concrete Properties ◽  
Curing Methods ◽  
The Impact

This study was conducted to investigate the impact of hot and dry environments under different curing conditions on the properties of high-strength concrete. The concrete samples were prepared at a room temperature of 20°C and cured under different curing conditions. Some specimens underwent standard curing from 24 h after casting until the day of testing. Some specimens underwent steam curing in a dry oven at 30°C and 50°C after casting until the day of testing. Other specimens were cured for 3, 7, 21, and 28 days in water and then placed in a dry oven at 30°C and 50°C and tested at the age of 28 days, except for the specimens that were cured for 28 days, which were tested at the age of 31 days, to study the effect of curing period on the strength of concrete exposed to dry and hot environments after moist curing. The effects of hot and dry environments on high-strength concrete with different water/binder ratios (0.30, 0.35, and 0.40), using (30%) fly ash for all mixes, and (0%, 5%, and 10%) silica fume with the binder (450, 480, and 520 kg), respectively, were separately investigated, and the effects of curing under different conditions were evaluated by measuring the compressive strength, flexural strength, microhardness, and chloride diffusion and by assessing the concretes’ microstructure. The relationships between these properties were presented. A good agreement was noted between the concrete compressive strength and concrete properties at different temperatures, curing periods, and curing methods.

Effects of Nano-CaCO3 on the Compressive Strength and Microstructure of High Strength Concrete in Different Curing Temperature

2011 ◽  
Vol 121-126 ◽  
pp. 126-131 ◽  
Author(s):  
Qing Lei Xu ◽  
Tao Meng ◽  
Miao Zhou Huang
Keyword(s):  
Compressive Strength ◽  
Low Temperature ◽  
High Strength Concrete ◽  
High Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Strength Concrete ◽  
Calcium Nitrite ◽  
Orientation Index ◽  
Early Strength

In this paper, effects of nano-CaCO3 on compressive strength and Microstructure of high strength concrete in standard curing temperature(21±1°C) and low curing temperature(6.5±1°C) was studied. In order to improve the early strength of the concrete in low temperature, the early strength agent calcium nitrite was added into. Test results indicated that 0.5% dosage of nano-CaCO3 could inhibit the effect of calcium nitrite as early strength agent, but 1% and 2% dosage of nano-CaCO3 could improve the strength of the concrete by 13% and 18% in standard curing temperature and by 17% and 14% in low curing temperature at the age of 3days. According to the XRD spectrum, with the dosage up to 1% to 2%, nano-CaCO3 can change the orientation index significantly, leading to the improvement of strength of concrete both in standard curing temperature and low curing temperature.

Effect of Chopped Basalt Fiber on the Fresh and Hardened Properties of Fly Ash High Strength Concrete

2014 ◽  
Vol 567 ◽  
pp. 381-386 ◽  
Author(s):  
Nasir Shafiq ◽  
Muhd Fadhil Nuruddin ◽  
Ali Elheber Ahmed Elshekh ◽  
Ahmed Fathi Mohamed Salih
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Strength Concrete ◽  
Basalt Fiber ◽  
High Strength ◽  
Progressive Increase ◽  
Test Results ◽  
Strength Concrete ◽  
Hardened Properties ◽  
Chopped Basalt Fiber

In order to improve the mechanical properties of high strength concrete, HSC, several studies have been conducted using fly ash, FA. Researchers have made it possible to achieve 100-150MPa high strength concrete. Despite the popularity of this FAHSC, there is a major shortcoming in that it becomes more brittle, resulting in less than 0.1% tensile strain. The main objective of this work was to evaluate the fresh and hardened properties of FAHSC utilizing chopped basalt fiber stands, CBFS, as an internal strengthening addition material. This was achieved through a series of experimental works using a 20% replacement of cement by FA together with various contents of CBFS. Test results of concrete mixes in the fresh state showed no segregation, homogeneousness during the mixing period and workability ranging from 60 to 110 mm. Early and long terms of compressive strength did not show any improvement by using CBFS; in fact, it decreased. This was partially substituted by the effect of FA. Whereas, the split and flexural strengths of FASHC were significantly improved with increasing the content of CBFS as well as the percentage of the split and flexural tensile strength to the compressive strength. Also, test results showed a progressive increase in the areas under the stress-strain curves of the FAHSC strains after the CBFS addition. Therefore, the brittleness and toughness of the FAHSC were enhanced and the pattern of failure moved from brittle failure to ductile collapse using CBFS. It can be considered that the CBFS is a suitable strengthening material to produce ductile FAHSC.

Influence of Nano Particles in the Flexural Behavior of High-Strength Reinforced Concrete Beams

2021 ◽  
Vol 1160 ◽  
pp. 25-43
Author(s):  
Naglaa Glal-Eldin Fahmy ◽  
Rasha El-Mashery ◽  
Rabiee Ali Sadeek ◽  
L.M. Abd El-Hafaz
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Reinforced Concrete Beams ◽  
Nano Particles ◽  
Flexural Behavior ◽  
Single Type ◽  
Strength Concrete ◽  
Flexural Ductility

High strength concrete (HSC) characterized by high compressive strength but lower ductility compared to normal strength concrete. This low ductility limits the benefit of using HSC in building safe structures. Nanomaterials have gained increased attention because of their improvement of mechanical properties of concrete. In this paper we present an experimental study of the flexural behavior of reinforced beams composed of high-strength concrete and nanomaterials. Eight simply supported rectangular beams were fabricated with identical geometries and reinforcements, and then tested under two third-point loads. The study investigated the concrete compressive strength (50 and 75 N/mm2) as a function of the type of nanomaterial (nanosilica, nanotitanium and nanosilica/nanotitanium hybrid) and the nanomaterial concentration (0%, 0.5% and 1.0%). The experimental results showed that nano particles can be very effective in improving compressive and tensile strength of HSC, nanotitanium is more effective than nanosilica in compressive strength. Also, binary usage of hybrid mixture (nanosilica + nanotitanium) had a remarkable improvement appearing in compressive and tensile strength than using the same percentage of single type of nanomaterials used separately. The reduction in flexural ductility due to the use of higher strength concrete can be compensated by adding nanomaterials. The percentage of concentration, concrete grade and the type of nanomaterials, could predominantly affect the flexural behavior of HSRC beams.

scholarly journals SHEAR STRENGTH OF RC BEAMS WITHOUT STIRRUP USING HIGH-STRENGTH CONCRETE OF COMPRESSIVE STRENGTH RANGING TO 130MPa

2003 ◽  
pp. 75-91
Author(s):  
Motoyuki SUZUKI ◽  
Mitsuyoshi AKIYAMA ◽  
Wei Lun WANG ◽  
Masayoshi SATO ◽  
Naomi MAEDA ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Shear Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Rc Beams ◽  
Strength Concrete

Estimation of Compressive Strength of Recycled Aggregate High Strength Concrete Using Ultrasonic Pulse Velocity

2014 ◽  
Vol 605 ◽  
pp. 147-150
Author(s):  
Seong Uk Hong ◽  
Seung Hun Kim ◽  
Yong Taeg Lee
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Coarse Aggregate ◽  
High Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Recycled Aggregate ◽  
Strength Concrete ◽  
Recycled Coarse Aggregate

This study used the ultrasonic pulse velocity method, one of the non-destructive test methods that does not damage the building for maintenance of to-be-constructed concrete structures using recycled aggregates in order to estimate the compressive strength of high strength concrete structure using recycled coarse aggregate and provide elementary resources for technological establishment of ultrasonic pulse velocity method. 200 test pieces of high strength concrete 40, 50MPa using recycled coarse aggregate were manufactured by replacement rates (0, 30, 50, 100%) and age (1, 7, 28, 180days), and air curing was executed to measure compressive strength and wave velocity. As the result of compressive strength measurement, the one with age of 180day and design strength of 40MPa was 43.69MPa, recycled coarse aggregate replacement rate of 30% 50% 100% were 42.82, 41.22, 37.35MPa, and 50MPa was 52.50MPa, recycled coarse aggregate replacement rate of 30% 50% 100% were 49.02, 46.66, 45.30MPa, and while it could be seen that the test piece substituted with recycled aggregate was found to have lower strength than the test piece with natural aggregate only, but it still reached the design strength to a degree. The correlation of compressive strength and ultrasonic pulse velocity was found and regression analysis was conducted. The estimation formula for compressive strength of high strength concrete using recycled coarse aggregate was found to be Fc=0.069Vp4.05, R2=0.66

Sign in / Sign up

Export Citation Format

Share Document