scholarly journals Sedimentation Processes: Geomorphological evidence for staged sand dam construction

Author(s):  
Jonathan Viducich ◽  
John Selker

Steam sediment transport is a convolution of climate, weather, geology, topography, biology, and human influence. In addition to providing water and food security for dryland rural communities, sand dams—small weirs designed to trap only the coarse fractions of transported sediments in seasonal and ephemeral streams—illuminate many complexities of geomorphological dynamics. Sand dams store water in interstitial riverbed pores and the size of deposited sediment particles largely determines the recoverability of stored water: fine materials limit transmission and provide lower volumetric yield. Can a sand dam be designed for a particular reach-scale, hydro-sedimentary context to limit capture of fine particles? We argue that the Rouse number provides a useful criterion for identifying regimes where the target material grades are trapped. These ideas were tested using sediment data collected in Kenya and HEC-RAS numerical simulations to evaluate the sensitivity of sedimentation processes to spillway height. We show that constructing sand dams in stages results in more targeted trapping of coarse material. Surprisingly, sedimentation is shown to be more sensitive to variation in spillway height than the flood hydrograph, especially when a dam is short. A method for evaluating the need for spillway staging (essentially controlling the bedform) based on the modeled Rouse number allows evaluation of costs and expected benefits. Beyond sand dams, this supports the observation that for dryland streams with peaky flows and high sediment loading, local hydraulic controls are typically more diagnostic of streambed sediment composition than is the sediment source.

2021 ◽  
Author(s):  
◽  
Cassandra Anh Trinh-Le

<p>The hyper-arid, cryotic, wind-dominated conditions in the high-elevation McMurdo Dry Valleys of Antarctica are among Earth’s most extreme environments and represent the closest terrestrial analog to the surface of Mars. These unique conditions result in complex surface processes that occur in the overall absence of liquid water. However, since water is typically believed to be required for these processes to occur, the mechanisms responsible for how these processes can persist in this environment are poorly understood. Previous studies that focused on individual processes of sedimentation in the Dry Valleys leave questions regarding the role of water in dry cryotic sedimentation as well as the rates at which these processes occur. This thesis addresses these questions by combining Optically Stimulated Luminescence (OSL) dating, meteoric Beryllium-10 (10Be) measurements, soil geochemistry analysis, and petrographic microscopy analysis on ice-cemented permafrost cores taken from University Valley, one of the high-elevation Dry Valleys, where the availability and effects of liquid water are minimal. These analyses were used to explore four main sedimentation processes that occur in the Dry Valleys: chemical weathering, fine particle translocation, eolian transport, and physical weathering. Analyzed together, findings from these analyses comprehensively describe the complex processes involved in dry cryotic sedimentation and determine the roles of different phases of water in this environment.   Sediments in University Valley have accumulated at a rate of approximately 2.1 mm/ka for the last 200 ka, as dated by OSL, from erosion of the valley walls and deposition of windblown dust. Sediment accumulation is influenced by topography of the valley floor, depth of the ice table, aspect of the valley walls, wind direction, and mechanical breakdown of rocks due to solar heating. While persistent winds constantly remobilize fine particles and dust in the upper few cm of the dry ground, sediment grains that are sand-sized or larger do not undergo significant remobilization, and sediments in the ice-cemented ground are unaffected by remobilization and translocation processes. Rare clay bridges seen in thin section show that small, infrequent, transient surface wetting events have occurred over the last 200 ka. High anion concentrations associated with high surface meteoric 10Be measurements and clay bridges indicate that the source of these wetting events is the melting of wind-blown snow from coastal regions. Patterns in meteoric Be measurements show that these small transient wetting events are not sufficient to translocate fine particles through the soil profile, which suggests that the role of liquid water as a transporting agent is negligible in this environment. Chemical weathering in University Valley appears to be controlled by two main components: dolerite content of the sediments, and exposure to the atmosphere at the ground surface where condensation of water vapor onto grain surfaces readily leaches ions from dolerite grains under the oxidizing conditions of the Dry Valleys. In the absence of liquid water, chemical processes that occur in this environment rely on water vapor.   Together, these results indicate that surfaces in University Valley are remarkably young and sedimentologically active. Because University Valley represents one of the closest terrestrial analogs to the surface of Mars, findings from this thesis may be applicable to understanding the timescales and the processes that control anhydrous sedimentation on the surface of Mars.</p>


1981 ◽  
Vol 15 (1) ◽  
pp. 24-43 ◽  
Author(s):  
Peter C. Patton ◽  
Stanley A. Schumm

AbstractThree unstable ephemeral-stream channels (arroyos), which drain source areas that have high sediment yields ranging from predominantly sand (Arroyo Calabasas) to a mixture of sand, silt, and clay (Sand Creek) to largely silt and clay (Sage Creek), were resurveyed to provide data on the rates and mechanics of erosion and sedimentation processes during periods ranging from 14 to 22 yr. Channel morphology changed significantly. Erosion occurred through nickpoint recession and bank collapse, but erosional reaches are separated by aggrading or stable-channel reaches. In general, sediment that is eroded, as the nickpoint recedes upstream, is trapped in the widened channel downstream. In this manner sediment is transported episodically out of these basins during a series of cut-and-fill cycles. The manner by which the channels aggrade and the morphology of the aggraded stable channels are controlled by the sediment type. The wide and shallow channel of Arroyo Calabasas is filled by vertical accretion of sand-size sediment. The narrow and deep channels of Sage Creek and Sand Creek are created by the lateral accretion of cohesive fine-grained sediment. The channel modification and the cut-and-fill episodes are dependent on high sediment yields, and therefore they are independent of subtle climatic shifts. Cut-and-fill deposits that have been created in this manner should not be equivalent in age from basin to basin, and therefore channel trenching and filling in the semiarid western United States during the Holocene need not be synchronous.


2013 ◽  
Vol 368-370 ◽  
pp. 1625-1628
Author(s):  
Cheng Chen ◽  
Yi Gang Wang ◽  
Hui Ming Huang ◽  
Qiong Pei Zeng ◽  
Chun Guang Yuan

The method to analysis the applicability of Rouse equation in Jiangsu coastal engineering is presented in this paper. The hydrological and sediment data in northern Jiangsu coastal area in August 2006 were adopted. Figure of sediment concentration changing with the relative water depth were made and analyzed. The result shows that the vertical profile of sediment concentration is similar with that under the conditions of equilibrium sediment transport in two-dimensional constant flow (exponential distribution). It can be concluded that the Rouse equation can be applied in the northern Jiangsu coastal engineering. In addition, the Rouse number and settling velocity are calculated in this paper.


2021 ◽  
Author(s):  
◽  
Cassandra Anh Trinh-Le

<p>The hyper-arid, cryotic, wind-dominated conditions in the high-elevation McMurdo Dry Valleys of Antarctica are among Earth’s most extreme environments and represent the closest terrestrial analog to the surface of Mars. These unique conditions result in complex surface processes that occur in the overall absence of liquid water. However, since water is typically believed to be required for these processes to occur, the mechanisms responsible for how these processes can persist in this environment are poorly understood. Previous studies that focused on individual processes of sedimentation in the Dry Valleys leave questions regarding the role of water in dry cryotic sedimentation as well as the rates at which these processes occur. This thesis addresses these questions by combining Optically Stimulated Luminescence (OSL) dating, meteoric Beryllium-10 (10Be) measurements, soil geochemistry analysis, and petrographic microscopy analysis on ice-cemented permafrost cores taken from University Valley, one of the high-elevation Dry Valleys, where the availability and effects of liquid water are minimal. These analyses were used to explore four main sedimentation processes that occur in the Dry Valleys: chemical weathering, fine particle translocation, eolian transport, and physical weathering. Analyzed together, findings from these analyses comprehensively describe the complex processes involved in dry cryotic sedimentation and determine the roles of different phases of water in this environment.   Sediments in University Valley have accumulated at a rate of approximately 2.1 mm/ka for the last 200 ka, as dated by OSL, from erosion of the valley walls and deposition of windblown dust. Sediment accumulation is influenced by topography of the valley floor, depth of the ice table, aspect of the valley walls, wind direction, and mechanical breakdown of rocks due to solar heating. While persistent winds constantly remobilize fine particles and dust in the upper few cm of the dry ground, sediment grains that are sand-sized or larger do not undergo significant remobilization, and sediments in the ice-cemented ground are unaffected by remobilization and translocation processes. Rare clay bridges seen in thin section show that small, infrequent, transient surface wetting events have occurred over the last 200 ka. High anion concentrations associated with high surface meteoric 10Be measurements and clay bridges indicate that the source of these wetting events is the melting of wind-blown snow from coastal regions. Patterns in meteoric Be measurements show that these small transient wetting events are not sufficient to translocate fine particles through the soil profile, which suggests that the role of liquid water as a transporting agent is negligible in this environment. Chemical weathering in University Valley appears to be controlled by two main components: dolerite content of the sediments, and exposure to the atmosphere at the ground surface where condensation of water vapor onto grain surfaces readily leaches ions from dolerite grains under the oxidizing conditions of the Dry Valleys. In the absence of liquid water, chemical processes that occur in this environment rely on water vapor.   Together, these results indicate that surfaces in University Valley are remarkably young and sedimentologically active. Because University Valley represents one of the closest terrestrial analogs to the surface of Mars, findings from this thesis may be applicable to understanding the timescales and the processes that control anhydrous sedimentation on the surface of Mars.</p>


Author(s):  
Kin Lam

The energy of moving ions in solid is dependent on the electronic density as well as the atomic structural properties of the target material. These factors contribute to the observable effects in polycrystalline material using the scanning ion microscope. Here we outline a method to investigate the dependence of low velocity proton stopping on interatomic distances and orientations.The interaction of charged particles with atoms in the frame work of the Fermi gas model was proposed by Lindhard. For a system of atoms, the electronic Lindhard stopping power can be generalized to the formwhere the stopping power function is defined as


Author(s):  
Robert F. Dunn

Receptor cells of the cristae in the vestibular labyrinth of the bullfrog, Rana catesbiana, show a high degree of morphological organization. Four specialized regions may be distinguished: the apical region, the supranuclear region, the paranuclear region, and the basilar region.The apical region includes a single kinocilium, approximately 40 stereocilia, and many small microvilli all projecting from the apical cell surface into the lumen of the ampulla. A cuticular plate, located at the base of the stereocilia, contains filamentous attachments of the stereocilia, and has the general appearance of a homogeneous aggregation of fine particles (Fig. 1). An accumulation of mitochondria is located within the cytoplasm basal to the cuticular plate.


Author(s):  
Sumio Iijima

We have developed a technique to prepare thin single crystal films of graphite for use as supporting films for high resolution electron microscopy. As we showed elsewhere (1), these films are completely noiseless and therefore can be used in the observation of phase objects by CTEM, such as single atoms or molecules as a means for overcoming the difficulties because of the background noise which appears with amorphous carbon supporting films, even though they are prepared so as to be less than 20Å thick. Since the graphite films are thinned by reaction with WO3 crystals under electron beam irradiation in the microscope, some small crystallites of WC or WC2 are inevitably left on the films as by-products. These particles are usually found to be over 10-20Å diameter but very fine particles are also formed on the film and these can serve as good test objects for studying the image formation of phase objects.


Author(s):  
A. M. Bradshaw

X-ray photoelectron spectroscopy (XPS or ESCA) was not developed by Siegbahn and co-workers as a surface analytical technique, but rather as a general probe of electronic structure and chemical reactivity. The method is based on the phenomenon of photoionisation: The absorption of monochromatic radiation in the target material (free atoms, molecules, solids or liquids) causes electrons to be injected into the vacuum continuum. Pseudo-monochromatic laboratory light sources (e.g. AlKα) have mostly been used hitherto for this excitation; in recent years synchrotron radiation has become increasingly important. A kinetic energy analysis of the so-called photoelectrons gives rise to a spectrum which consists of a series of lines corresponding to each discrete core and valence level of the system. The measured binding energy, EB, given by EB = hv−EK, where EK is the kineticenergy relative to the vacuum level, may be equated with the orbital energy derived from a Hartree-Fock SCF calculation of the system under consideration (Koopmans theorem).


Author(s):  
Werner P. Rehbach ◽  
Peter Karduck

In the EPMA of soft x rays anomalies in the background are found for several elements. In the literature extremely high backgrounds in the region of the OKα line are reported for C, Al, Si, Mo, and Zr. We found the same effect also for Boron (Fig. 1). For small glancing angles θ, the background measured using a LdSte crystal is significantly higher for B compared with BN and C, although the latter are of higher atomic number. It would be expected, that , characteristic radiation missing, the background IB (bremsstrahlung) is proportional Zn by variation of the atomic number of the target material. According to Kramers n has the value of unity, whereas Rao-Sahib and Wittry proposed values between 1.12 and 1.38 , depending on Z, E and Eo. In all cases IB should increase with increasing atomic number Z. The measured values are in discrepancy with the expected ones.


Author(s):  
K. F. Russell ◽  
L. L. Horton

Beams of heavy ions from particle accelerators are used to produce radiation damage in metal alloys. The damaged layer extends several microns below the surface of the specimen with the maximum damage and depth dependent upon the energy of the ions, type of ions, and target material. Using 4 MeV heavy ions from a Van de Graaff accelerator causes peak damage approximately 1 μm below the specimen surface. To study this area, it is necessary to remove a thickness of approximately 1 μm of damaged metal from the surface (referred to as “sectioning“) and to electropolish this region to electron transparency from the unirradiated surface (referred to as “backthinning“). We have developed electropolishing techniques to obtain electron transparent regions at any depth below the surface of a standard TEM disk. These techniques may be applied wherever TEM information is needed at a specific subsurface position.


Sign in / Sign up

Export Citation Format

Share Document