scholarly journals Analiza porównawcza poziomu i struktury wydatków na działalność prewencyjną w zakresie bezpieczeństwa i higieny pracy ponoszonych przez przedsiębiorstwa przemysłu spożywczego w województwie łódzkim

2017 ◽  
pp. 151-163
Author(s):  
Anetta Zielińska
Keyword(s):  
Health Risks ◽  
Occupational Safety ◽  
Health Spending ◽  
Prevention Programs ◽  
Occupational Safety And Health ◽  
Safety And Health ◽  
Work Accidents

The article describes the level and structure of company’s expenditures attributed to the prevention of the occupational safety and health risks. The survey was conducted on food companies in the Lodz region. The research reveals that over the period of 2008–2012 the number of work accidents increased by about 29% while the prevention-related spending increased by merely 2.5%. This situation must be negatively assessed because the company’s activity in the area of occupational safety and health at a workplace should not be reduced to providing workers with basic resources enabling them to conduct the entrusted activities. The expenditures on prevention programs were too low and ineffective. Moreover, the increase of the occupational safety and health spending did not have any impact on the changes in the number of accidents at a workplace.

scholarly journals EVALUATION OF OCCUPATIONAL SAFETY AND HEALTH IN PT PANTJA SIMPATI

KREATOR ◽  
2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Ahmad Faqih Solansa ◽  
Hendra Nanang ◽  
M Sudiyamto
Keyword(s):  
Personal Protective Equipment ◽  
Occupational Diseases ◽  
Occupational Safety ◽  
Occupational Safety And Health ◽  
Occupational Accidents ◽  
Protective Equipment ◽  
Safety And Health ◽  
Production Section ◽  
Work Accidents ◽  
A Company

Every production process in a company is inseparable from all the dangers of disease and occupational accidents for workers. So in a company it is necessary to implement occupational safety and health in order to reduce and prevent occupational diseases and accidents. In carrying out occupational safety and health at PT Pantja Simpati, PT Pantja Simpati has several problems that can cause illness and work accidents such as unavailability of personal protective equipment, non-functioning air vents, employees smoking in the production room, employees drinking in the production section. part. areas, fire fighting equipment lacks lighting, damaged ceilings or roofs, untidy cables, and slippery production floors. Ways to avoid work accidents such as providing PPE and APAR, repairing damaged equipment, and taking firm action against workers. From the problems found, the implementation of occupational safety and health at PT Pantja Simpati is still not good.Keywords— Occupational Safety and Health, 5W+1H

Operating Engineers and the OSHA Silica Standard: A Survey of Union Trainers

2019 ◽  
Vol 29 (4) ◽  
pp. 530-535
Author(s):  
Grace Barlet ◽  
Rosemary K. Sokas ◽  
Eileen Betit
Keyword(s):  
Health Risks ◽  
Online Survey ◽  
Occupational Safety ◽  
Response Rate ◽  
Occupational Safety And Health ◽  
Health Administration ◽  
Silica Exposure ◽  
Engineering Control ◽  
Heavy Equipment ◽  
Safety And Health

Enclosed cabs with filtration systems, an engineering control preferred in the hierarchy of controls, may reduce heavy equipment operators’ silica exposure during demolition, grading, and excavation. We surveyed operating engineer trainers about silica training, familiarity with the Occupational Safety and Health Administration (OSHA) silica standard, and cab filtration systems. A voluntary and anonymous online survey was e-mailed to 437 trainers in January 2018. The response rate was 22.9 percent (n = 100). Most trainers (84 percent) covered health risks and silica exposure prevention in their courses. Of these, 59 percent discussed cab filtration as an engineering control. Trainers identified possible barriers to the use of cab filtration systems and a need for education to increase use, and raised concerns about other exposures associated with heavy equipment use. Education about selection, use, and maintenance of cab filtration systems to control silica exposure is needed. Engineering improvements to heavy equipment should address cab filtration, noise, heat, and vibration.

scholarly journals Penerapan Personal Protective Equipment Pada Workshop Politeknik Ilmu Pelayaran Makassar

2019 ◽  
Vol 17 (2) ◽  
pp. 221
Author(s):  
Syahrisal Syahrisal ◽  
Paulus Pongkessu ◽  
Mahadir Sirman ◽  
Heny Pasandang Nari
Keyword(s):  
Personal Protective Equipment ◽  
Quantitative Methods ◽  
Occupational Safety ◽  
Occupational Safety And Health ◽  
Environmental Damage ◽  
Protective Equipment ◽  
Government Regulations ◽  
Safety And Health ◽  
The World ◽  
Work Accidents

Implementation according to the rules of occupational safety and health is needed in all jobs that are useful to avoid things that are not desirable, such as work accidents. The workforce consists of educated and trained people. One of the educated people referred to is the D-IV and DP-III graduates of the Makassar Shipping Polytechnic, because one of the fillers in the world of work is the Polytechnic graduate. The learning process while in the laboratory must be a serious concern in order to get qualified prospective workers, especially understanding about the application of occupational safety and health (K3) especially the use of personal protective equipment so that there are no direct or indirect obstacles in the work, such as work accidents occur, damage to machinery, cessation of production processes, environmental damage and expenses related to work accidents. The purpose of this research is to find out the availability and analyze the application of personal protective equipment to occupational safety and health in the workshop. This research includes the type of survey research with quantitative methods. This design seeks to determine the PPE facilities available at the Workshop, symbols / cues about occupational safety and health, the conditions of the practice room and what percentage of PPE use by cadets during practice. The data collection method is done by using a questionnaire and documentation used to determine PPE facilities available in the Workshop, symbols / cues about occupational safety and health, the conditions of the practice room and what percentage of the use of PPE cadets during practice. The conclusion is that the personal protective equipment (PPE) facilities in the workshop have been provided by the workshop and can be used by cadets or pasis and safely in accordance with government regulations, and the knowledge, understanding and application of cadets towards PPE have reached an average of 95%

scholarly journals The Effect of Application of Work Safety and Health Management System (K3) and Organizational Culture on Employee Work Satisfaction in TK II Hospital, dr. Soepraoen Malang

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Suripto Suripto ◽  
Byba Melda Suhita ◽  
Indasah Indasah
Keyword(s):  
Job Satisfaction ◽  
Organizational Culture ◽  
Management System ◽  
Occupational Safety ◽  
T Test ◽  
Occupational Safety And Health ◽  
Employee Job Satisfaction ◽  
Safety And Health ◽  
Work Accidents ◽  
Leadership Policy

Occupational safety and health (K3) is an effort to create a safe and comfortable atmosphere to achieve the highest productivity. Factors which influence to achieve the purpose of these efforts, including the company's commitment; leadership policy regarding (K3); policies for the creation of a work environment in order to create K3, delegation of authority, implementation of training and education during the project; prevention of workplace accidents; tracing the main causes of work accidents; measure program performance (K3); and continuous documentation and records of work accidents. The research design used is quantitative research. The sampling technique used proportional sampling with a sample of 100 respondents. Data analysis techniques using multiple linear regression tests. The results show that there was a significant effect and the t test showed 6,665> t table (2,000), meaning that occupational safety and health had a significant effect on job satisfaction and there was a significant effect and the t test showed 6.802> t table (2,000), meaning spatial planning significant effect on employee job satisfaction. Based on the explanation, it can be concluded that the better the K3 management system, organizational culture, K3 management system, the higher the level of Employee Job Satisfaction at the Hospital. II dr. Soepraoen; and the organizational culture (X2) has the highest dominant influence toward employee satisfaction.

PROSES MANUFAKTUR ALAT PELEPAS SEAL SUSPENSI DEPAN JENIS TELESCOPIC FORK SEPEDA MOTOR

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
S Susilawati ◽  
Azhis Sholeh Buchori ◽  
Oyok Yudianto
Keyword(s):  
Processing Time ◽  
Occupational Safety ◽  
Design Tool ◽  
Occupational Safety And Health ◽  
Front Suspension ◽  
Oil Leakage ◽  
Safety And Health ◽  
Special Service ◽  
Release Device ◽  
Work Accidents

One of the most common damages to motorcycles is damage to the seals on the motorcycle suspension, which results in a large amount of oil leakage. To repair the damage a seal removal tool is needed which functions as a Special Service Tool (SST) which is often used in motorcycle workshops. The variety of types and brands of motorcycles, causing motorcycle workshops must have complete equipment, according to the motorcycles brand that is repaired, this results in the expenditure of excess money, especially in the supply of seal removal devices according to the motorcycle brand. The purpose of this research is to create a flexible Telescopic Fork front suspension seal release device, which can be used for all types of motorcycle brands. The method used in this research is tool design, tool manufacturing process, and testing the application of seal removal tools. It is evidenced from the results of the usage test that the resulting seal removal tool can be used for all types of motorcycle brands, this tool can shorten the processing time, and also does not cause new damage to the repaired components. However, it is necessary to examine the application of occupational safety and health to prevent work accidents in the process of making this seal removal device.

Penyuluhan Keselamatan Dan Kesehatan Kerja Di Wilayah Kerja Puskesmas Simpur

2021 ◽  
Vol 4 (4) ◽  
pp. 914-920
Author(s):  
Arti Febriyani Hutasuhut ◽  
Anggunan Anggunan ◽  
Eka Silvia ◽  
Mardheni Wulandari ◽  
Nia Triswanti ◽  
...  
Keyword(s):  
Occupational Diseases ◽  
Occupational Safety ◽  
Agricultural Sector ◽  
Community Health Center ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Self Evaluation ◽  
Safety And Health ◽  
Service Sectors ◽  
Work Accidents

ABSTRAK Setiap pekerjaan selalu mengandung potensi resiko bahaya dalam bentuk kecelakaan dan penyakit kerja. Kasus-kasus kecelakaan dan penyakit kerja di dunia, Indonesia masih cukup besar, baik di kota maupun di desa, baik disektor industri dan jasa-jasa maupun juga disektor pertanian. Masalah keselamatan dan kecelakaan kerja di Indonesia masih sering diabaikan, hal ini dapat dilihat dari masih tingginya angka kecelakaan kerja. Oleh karena itu pentingnya pengetahuan pekerja tentang keselamatan dan kesehatan kerja sebagai evaluasi diri. Salah satu upaya yang dapat dilakukan dengan memberikan penyuluhan tentang Keselamatan dan Kesehatan Kerja (K3). Tujuan dari kegiatan ini adalah untuk meningkatkan pengetahuan, motivasi dan mengevaluasi diri pekerja  mengenai pentingnya menjaga kesehatan dan keselamatan dalam bekerja. Metode yang di gunakan dalam kegiatan ini adalah penyuluhan kepada pegawai pabrik kerupuk dan pabrik bawang putih mengenai Keselamatan dan Kesehatan Kerja (K3). Pelaksanaan kegiatan berkordinasi dengan Puskesmas Rawat Inap Simpur dan dibantu oleh mahasiswa FK malahayati Bandar Lampung angkatan 2017 yang dilaksanakan pada bulan Desember 2020. Hasil dari kegiatan ini adalah Peserta penyuluhan dapat memahami dan mengerti untuk menjaga Kesehatan dan keselamatan dalam bekerja serta memberikan kesadaran pada pekerta untuk bisa melindungi diri dalam pekerjaanya dengan menggunakan APD yang sudah di siapakan oleh pabrik yang bersangkutan secara benar dan sesuai. Kata kunci : Penyuluhan, Keselamatan dan Kesehatan Kerja (K3), Pegawai Pabrik  ABSTRACT Every job always contains a potential risk of danger in the form of accidents and occupational diseases. The cases of accidents and occupational diseases in the world, Indonesia are still quite large, both in cities and villages, both in the industrial and service sectors as well as in the agricultural sector. The problem of safety and work accidents in Indonesia is still often ignored, this can be seen from the high number of work accidents. Therefore the importance of workers' knowledge about occupational safety and health as a self-evaluation. One of the efforts that can be done is by providing education about Occupational Safety and Health (K3). The purpose of this activity is to increase the knowledge, motivation, and self-evaluation of workers regarding the importance of maintaining health and safety at work. The method used in this activity is counseling employees of cracker factories and garlic factories regarding Occupational Health and Safety (K3). Implementation of activities in coordination with the Simpur Inpatient Community Health Center and assisted by students of FK Malahayati Bandar Lampung class of 2017 which was held in December 2020. The results of this activity were that the participants could understand and understand to maintain health and safety at work and provide awareness to participants to be able to protect themselves in their work by using PPE that has been prepared by the factory concerned properly and accordingly. Keywords: Counseling, Occupational Safety and Health (K3), Factory Employees

scholarly journals Development of Safety Plan Building Based on Work Breakdown Structure (WBS) in Campus Area of UI Depok to Reduce Work Accident

2021 ◽  
Vol 4 (1) ◽  
pp. 104-116
Author(s):  
Astrid Dwi Lestari ◽  
Ayu Herzanita ◽  
Yusuf Latief
Keyword(s):  
Occupational Safety ◽  
Risk Identification ◽  
Occupational Safety And Health ◽  
Occupational Accidents ◽  
Literature Study ◽  
Work Breakdown Structure ◽  
Safety And Health ◽  
Safety Plan ◽  
Work Accidents ◽  
The University

There is very little discussion about the needs of occupational health within the University area. In fact, the University is a place where interaction occurs not only for lecturers and students, but also employees, contractors and other visitors with very varied backgrounds and cultures. The lack of application of OHSMS in the construction sector in the University area causes a high number of work accidents. Making a safety plan at the initiation stage can reduce and prevent potential hazards that will occur. One of the methods can be used to reduce work accidents is by developing a safety plan using WBS (Work Breakdown Structure). This study aims to develop a WBS-based construction occupational safety and health plan for structural and architectural work buildings. This study develops a safety plan based on Regulation of Minister of PUPR No. 21 of 2019. This study uses literature study techniques for risk identification and questionnaires validation by experts with a minimum of 5 years experiences in OHS construction project. The result of this study is identification of hazards, impacts, prevention, OHS objective and programs. The results will be used for the development of a safety plan, intending to improve occupational safety and health performance and reduce occupational accidents in construction projects.

Sign in / Sign up

Export Citation Format

Share Document