Effect of glycerol content and pH value of film-forming solution on the functional properties of protein-based edible films

The work is concerned with the effects of glycerol content and pH value of film forming solution on the functional properties of protein-based films. The films were produced of chicken breast proteins, dissolved under either acidic (pH 3) or alkaline (pH 11) conditions, with different concentrations of glycerol (35%, 50% and 65% w/w of protein content). Glycerol content affected significantly mechanical properties, water vapor permeability, color at pH 3 and film solubility (p<0.05). The pH value had significant influence on light transmission, color, transparency and film solubility (p<0.05). Considering the results of mechanical properties and film solubility, the obtained films are in the acceptable range for the use as a packaging material. It was estimated that water vapor permeability, color, light transmission and transparency need to be improved for the application.

Download Full-text

Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽

10.3390/molecules26113090 ◽

2021 ◽

Vol 26 (11) ◽

pp. 3090

Author(s):

Anita Ptiček Siročić ◽

Ana Rešček ◽

Zvonimir Katančić ◽

Zlata Hrnjak-Murgić

Keyword(s):

Mechanical Properties ◽

Thermal Properties ◽

Water Vapor ◽

Aluminum Oxide ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Mechanical And Thermal Properties ◽

Oxide Compound ◽

Bilayer Films ◽

Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

Download Full-text

Fabrication of Composite Films Based on Chitosan and Vegetable-Tanned Collagen Fibers Crosslinked with Genipin

Journal of the American Leather Chemists Association ◽

10.34314/jalca.v116i10.4616 ◽

2021 ◽

Vol 116 (10) ◽

Author(s):

Jie Liu ◽

Yanchun Liu ◽

Eleanor M. Brown ◽

Zhengxin Ma ◽

Cheng-Kung Liu

Keyword(s):

Mechanical Properties ◽

Thermal Stability ◽

Water Vapor ◽

Composite Film ◽

Composite Films ◽

Value Added ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Leather Industry ◽

Compact Structure

The leather industry generates considerable amounts of solid waste and raises many environmental concerns during its disposal. The presence of collagen in these wastes provides a potential protein source for the fabrication of bio-based value-added products. Herein, a novel composite film was fabricated by incorporating vegetable-tanned collagen fiber (VCF), a mechanically ground powder-like leather waste, into a chitosan matrix and crosslinked with genipin. The obtained composite film showed a compact structure and the hydrogen bonding interactions were confirmed by FTIR analysis, indicating a good compatibility between chitosan and VCF. The optical properties, water absorption capacity, thermal stability, water vapor permeability and mechanical properties of the composite films were characterized. The incorporation of VCF into chitosan led to significant decreases in opacity and solubility of the films. At the same time, the mechanical properties, water vapor permeability and thermal stability of the films were improved. The composite film exhibited antibacterial activity against food-borne pathogens. Results from this research indicated the potential of the genipin-crosslinked chitosan/VCF composites for applications in antimicrobial packaging.

Download Full-text

Formulation and Characterization of Edible Films Based on Organic Mucilage from Mexican Opuntia ficus-indica

Coatings ◽

10.3390/coatings9080506 ◽

2019 ◽

Vol 9 (8) ◽

pp. 506 ◽

Cited By ~ 9

Author(s):

Dulce C. González Sandoval ◽

Brenda Luna Sosa ◽

Guillermo Cristian Guadalupe Martínez-Ávila ◽

Humberto Rodríguez Fuentes ◽

Victor H. Avendaño Abarca ◽

...

Keyword(s):

Water Vapor ◽

Light Transmission ◽

Transmission Rate ◽

Film Formation ◽

Water Vapor Permeability ◽

Edible Films ◽

Solution Viscosity ◽

Vapor Permeability ◽

Yellowness Index ◽

Opuntia Ficus Indica

The consumption of organic products has increased in recent years. One of the most important products in Mexico is nopal. Nopal’s content and properties make the formulation of edible films possible. In this study, we aimed to develop and characterize biodegradable edible films containing mucilage from Opuntia ficus-indica. The mucilage extraction yield, thickness, color, water vapor permeability, light transmission rate, film transparency, solubility, stability of dispersion, and puncture strength were measured. The use of mucilage from different cultivars affected the water vapor permeability (8.40 × 10−11 g·m−1·s−1·Pa−1 for cultivar Villanueva, 3.48 × 10−11 g·m−1·s−1·Pa−1 for Jalpa, and 1.63 × 10−11 g·m−1·s−1·Pa−1 for Copena F1). Jalpa provided the most soluble mucilage with the highest thickness (0.105 mm). Copena F1 provided the clearest film with the greatest transparency (3.81), the best yellowness index, and the highest resistance (4.44 N·mm−1). Furthermore, this film had the best light transmission rate (48.93%). The Copena F1 showed the best film formation solution viscosity. These results indicate that mucilage mixed with pectin is a potential source for the formulation of edible films.

Download Full-text

Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽

10.3390/polym12010158 ◽

2020 ◽

Vol 12 (1) ◽

pp. 158

Author(s):

Yao Dou ◽

Liguang Zhang ◽

Buning Zhang ◽

Ming He ◽

Weimei Shi ◽

...

Keyword(s):

Water Vapor ◽

Carboxymethyl Cellulose ◽

Food Packaging ◽

Light Transmission ◽

Value Added ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Edible Films ◽

Vapor Permeability ◽

Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Download Full-text

Elaboration and Characterization of Active Apple Starch Films Incorporated with Ellagic Acid

Coatings ◽

10.3390/coatings8110384 ◽

2018 ◽

Vol 8 (11) ◽

pp. 384

Author(s):

Juan Tirado-Gallegos ◽

Paul Zamudio-Flores ◽

José Ornelas-Paz ◽

Claudio Rios-Velasco ◽

Guadalupe Olivas Orozco ◽

...

Keyword(s):

Mechanical Properties ◽

Tensile Strength ◽

Water Vapor ◽

Antioxidant Capacity ◽

Ellagic Acid ◽

Uv Light ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Starch Films

Apple starch films were obtained from apples harvested at 60, 70, 80 and 90 days after full bloom (DAFB). Mechanical properties and water vapor permeability (WVP) were evaluated. The apple starch films at 70 DAFB presented higher values in the variables of tensile strength (8.12 MPa), elastic modulus (3.10 MPa) and lower values of water vapor permeability (6.77 × 10−11 g m−1 s−1 Pa−1) than apple starch films from apples harvested at 60, 80 and 90 DAFB. Therefore, these films were chosen to continue the study incorporating ellagic acid (EA). The EA was added at three concentrations [0.02% (FILM-EA0.02%), 0.05% (FILM-EA0.05%) and 0.1% (FILM-EA0.1%) w/w] and compared with the apple starch films without EA (FILM-Control). The films were characterized by their physicochemical, optical, morphological and mechanical properties. Their thermal stability and antioxidant capacity were also evaluated. The FILM-Control and FILM-EA0.02% showed a uniform surface, while FILM-EA0.05% and FILM-EA0.1% showed a rough surface and insoluble EA particles. Compared to FILM-Control, EA modified the values of tensile strength, elasticity modulus and elongation at break. The antioxidant capacity increased as EA concentration did. EA incorporation allowed obtaining films with higher antioxidant capacity, capable of blocking UV light with better mechanical properties than film without EA.

Download Full-text