scholarly journals Effects of bioethanol ultrasonic generated aerosols application on diesel engine performances

2015 ◽  
Vol 19 (6) ◽  
pp. 1931-1941 ◽  
Author(s):  
Florin Mariasiu ◽  
Nicolae Burnete ◽  
Dan Moldovanu ◽  
Bogdan Varga ◽  
Calin Iclodean ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Environmental Protection ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Pollutant Emissions ◽  
Brake Specific Fuel Consumption ◽  
Ultrasound Device ◽  
Different Types ◽  
Performance And Emissions ◽  
Bioethanol Fuel

In this paper the effects of an experimental bioethanol fumigation application using an experimental ultrasound device on performance and emissions of a single cylinder diesel engine have been experimentally investigated. Engine performance and pollutant emissions variations were considered for three different types of fuels (biodiesel, biodiesel-bioethanol blend and biodiesel and fumigated bioethanol). Reductions in brake specific fuel consumption and NOx pollutant emissions are correlated with the use of ultrasonic fumigation of bioethanol fuel, comparative to use of biodiesel-bioethanol blend. Considering the fuel consumption as diesel engine?s main performance parameter, the proposed bioethanol?s fumigation method, offers the possibility to use more efficient renewable biofuels (bioethanol), with immediate effects on environmental protection.

scholarly journals Comparison of the Emissions, Noise, and Fuel Consumption Comparison of Direct and Indirect Piezoelectric and Solenoid Injectors in a Low-Compression-Ratio Diesel Engine

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4023 ◽  
Author(s):  
Stefano d’Ambrosio ◽  
Alessandro Ferrari ◽  
Alessandro Mancarella ◽  
Salvatore Mancò ◽  
Antonio Mittica
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Compression Ratio ◽  
Fuel Injection ◽  
Engine Performance ◽  
Combustion Noise ◽  
Driving System ◽  
Performance And Emissions ◽  
Direct Acting ◽  
Engine Performance And Emissions

An experimental investigation has been carried out to compare the performance and emissions of a low-compression-ratio Euro 5 diesel engine featuring high EGR rates, equipped with different injector technologies, i.e., solenoid, indirect-acting, and direct-acting piezoelectric. The comparisons, performed with reference to a state-of-the-art double fuel injection calibration, i.e., pilot-Main (pM), are presented in terms of engine-out exhaust emissions, combustion noise (CN), and fuel consumption, at low–medium engine speeds and loads. The differences in engine performance and emissions of the solenoidal, indirect-acting, and direct-acting piezoelectric injector setups have been found on the basis of experimental results to mainly depend on the specific features of their hydraulic circuits rather than on the considered injector driving system.

Effects of Micro-Emulsion Fuels on the Performance and Emissions of Diesel Engine

2011 ◽  
Vol 236-238 ◽  
pp. 151-154 ◽  
Author(s):  
Jia Quan Wang ◽  
Ping Sun ◽  
Zhen Chen ◽  
De Qing Mei
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Performance And Emissions ◽  
Micro Emulsion ◽  
Effects Of Temperature ◽  
The Stability

The micro-emulsion fuels were prepared with complex surfactant, and the effects of temperature on the stability of these fuels were investigated. The engine performance and the emissions were studied when the engine was fueled with diesel and micro-emulsion diesel respectively. Results showed that when the engine was fueled with micro-emulsion diesel, the NOXand smoke emissions were decreased obviously and HC and CO emissions were increased slightly. Discounting of surfactant and water, the specific fuel consumption of micro-emulsion diesel was lower than those of diesel under any load at the speed of 2900r/min.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

Effects of Ethanol-n butanol-diesel Oxygenated Fuel on Performance of Diesel Engine

2013 ◽  
Vol 860-863 ◽  
pp. 1766-1769
Author(s):  
Ming Wei Xiao ◽  
Jin'ge He
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Direct Injection ◽  
Brake Specific Fuel Consumption ◽  
Fuel Supply ◽  
Direct Injection Diesel Engine ◽  
Oxygenated Fuel ◽  
Performance And Emissions ◽  
Blend Fuel

The experiments of the economy performance and emissions of diesel engine fueled with ethanol-n butanol-diesel were performed on a dual-cylinder direct injection diesel engine. The results show that without modification on the engine, while the mixed proportion of ethanol getting larger, the equivalent brake specific fuel consumption decreases and effective thermal efficiency increases when the diesel engine work on medium and high loads condition, NOX emissions and smoke decreased obviously. But the smoke increased when the proportion of ethanol is 20%. And the results also indicate that it is beneficial for decreasing the smoke and NOX emissions to reduce suitably fuel supply advance angle when the diesel engine fueled with blend fuel mixed high proportion of ethanol.

Variable smoothing of optimal diesel engine calibration for improved performance and drivability during transient operation

2020 ◽  
pp. 146808742091880
Author(s):  
Varun Pandey ◽  
Stijn van Dooren ◽  
Johannes Ritzmann ◽  
Benjamín Pla ◽  
Christopher Onder
Keyword(s):  
Diesel Engine ◽  
Nitrogen Oxide ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Pollutant Emissions ◽  
Tuning Parameter ◽  
Time Varying ◽  
Nitrogen Oxide Emissions ◽  
Trade Off ◽  
Optimal Calibration

The model-based method to define the optimal calibration maps for important diesel engine parameters may involve three major steps. First, the engine speed and load domain – in which the engine is operated – are identified. Then, a global engine model is created, which can be used for offline simulations to estimate engine performance. Finally, optimal calibration maps are obtained by formulating and solving an optimisation problem, with the goal of minimising fuel consumption while meeting constraints on pollutant emissions. This last step in the calibration process usually involves smoothing of the maps in order to improve drivability. This article presents a method to trade off map smoothness, brake-specific fuel consumption and nitrogen oxide emissions. After calculating the optimal but potentially non-smooth calibration maps, a variation-based smoothing method is employed to obtain different levels of smoothness by adapting a single tuning parameter. The method was experimentally validated on a heavy-duty diesel engine, and the non-road transient cycle was used as a case study. The error between the reference and actual engine torque was used as a metric for drivability, and the error was found to decrease with increasing map smoothness. After having obtained this trade-off for various fixed levels of smoothness, a time-varying smoothness calibration was generated and tested. Experimental results showed that, with a time-varying smoothness strategy, nitrogen oxide emissions could be reduced by 4%, while achieving the same drivability and fuel consumption as in the case of a fixed smoothing strategy.

scholarly journals Effects of particle size of cerium oxide nanoparticles on the combustion behavior and exhaust emissions of a diesel engine powered by biodiesel/diesel blend

2021 ◽  
Vol 8 (2) ◽  
pp. 1374-1383
Author(s):  
P. Dinesha ◽  
Shiva Kumar ◽  
Marc A. Rosen
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Cerium Oxide ◽  
Volume Fraction ◽  
Engine Performance ◽  
Ceo2 Nanoparticles ◽  
Specific Fuel Consumption ◽  
Future Research ◽  
Brake Specific Fuel Consumption ◽  
Engine Emissions

Meeting the emission norms specified by governing bodies is one of the major challenges faced by engine manufacturers, especially without sacrificing engine performance and fuel economy. Several methods and techniques are being used globally to reduce engine emissions. Even though emissions can be reduced, doing so usually entails a deterioration in performance. To address this problem, nanoadditives such as cerium oxide (CeO2) nanoparticles are used to reduce engine emissions while improving engine performance. However, some aspects of the application of these nanoadditives are still unknown. In light of that, three sizes of CeO2 nanoparticles (i.e., 10, 30, and 80 nm) and at a constant volume fraction of 80 ppm were added to a 20% blend of waste cooking oil biodiesel and diesel (B20). A single-cylinder diesel engine operating at a 1500 rpm speed and 180 bar fuel injection pressure was used to compare the performance and emission characteristics of the investigated fuel formulations. The results showed that the addition of CeO2 nanoparticles led to performance improvements by reducing brake specific fuel consumption. Moreover, the catalytic action of CeO2 nanoparticles on the hydrocarbons helped achieve effective combustion and reduce the emission of carbon monoxide, unburnt hydrocarbon, oxides of nitrogen, and soot. Interestingly, the size of the nanoadditive played an instrumental role in the improvements achieved, and the use of 30 nm-sized nanoparticles led to the most favorable performance and the lowest engine emissions. More specifically, the fuel formulation harboring 30 nm nanoceria reduced brake specific fuel consumption by 2.5%, NOx emission by 15.7%, and smoke opacity by 34.7%, compared to the additive-free B20. These findings could shed light on the action mechanism of fuel nanoadditives and are expected to pave the way for future research to develop more promising fuel nanoadditives for commercial applications.

Effects of Coolant Temperature on the Performance and Emissions of a Diesel Engine

2002 ◽  
Author(s):  
Waleed A. Abdelghaffar ◽  
Mohsen M. Osman ◽  
Mohamed N. Saeed ◽  
Abdelfattah I. Abdelfatteh
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Specific Fuel Consumption ◽  
Coolant Temperature ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Performance And Emissions ◽  
Unburned Hydrocarbons ◽  
Engine Coolant ◽  
The Relationship

Experiments were conducted on a four-cylinder, four-stroke, direct-injected diesel engine to study the effects of engine coolant temperature on both performance parameters and exhaust emissions. The energy balance is discussed on the bases of first-law analysis and second-law analysis. The range of speed investigated was 1000–2000 RPM for the torque range of 25–152 N.m. The coolant temperature was varied from 50 to 95 °C. The present study shows that the coolant temperature has a significant effect on the volumetric efficiency. It also shows that increasing coolant temperature decreases the mass flow rate of fuel consumption and the cooling losses. As a result, the brake specific fuel consumption decreases and the brake thermal efficiency increases. A chart was developed for showing the relationship between the coolant temperature, equivalence ratio, brake torque, and brake specific fuel consumption. The study shows that the coolant temperature has a significant effect on NOx emissions and minor effects on the volumetric percentages of oxygen, carbon dioxide, and carbon monoxide. The unburned hydrocarbons show insignificant variation. This work also shows that increasing coolant temperature slightly increases the availability of the coolant and decreases the total availability losses.

scholarly journals Performance and Emission Characteristics of Diesel Engine Fueled with Ethanol-Diesel Blends in Different Altitude Regions

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Jilin Lei ◽  
Yuhua Bi ◽  
Lizhong Shen
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Atmospheric Pressure ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Obvious Effect ◽  
Performance And Emission ◽  
Mix Proportion ◽  
Performance And Emissions ◽  
Better Than

In order to investigate the effects ethanol-diesel blends and altitude on the performance and emissions of diesel engine, the comparative experiments were carried out on the bench of turbo-charged diesel engine fueled with pure diesel (as prototype) and ethanol-diesel blends (E10, E15, E20 and E30) under different atmospheric pressures (81 kPa, 90 kPa and 100 kPa). The experimental results indicate that the equivalent brake-specific fuel consumption (BSFC) of ethanol-diesel blends are better than that of diesel under different atmospheric pressures and that the equivalent BSFC gets great improvement with the rise of atmospheric pressure when the atmospheric pressure is lower than 90 kPa. At 81 kPa, both HC and CO emissions rise greatly with the increasing engine speeds and loads and addition of ethanol, while at 90 kPa and 100 kPa their effects on HC and CO emissions are slightest. The changes of atmospheric pressure and mix proportion of ethanol have no obvious effect on NOxemissions. Smoke emissions decrease obviously with the increasing percentage of ethanol in blends, especially atmospheric pressure below 90 kPa.

scholarly journals Effect of boosting system architecture and thermomechanical limits on diesel engine performance: Part II—transient operation

2017 ◽  
Vol 19 (8) ◽  
pp. 873-885 ◽  
Author(s):  
José Galindo ◽  
Hector Climent ◽  
Olivier Varnier ◽  
Chaitanya Patil
Keyword(s):  
Fuel Consumption ◽  
Combustion Engine ◽  
Test Procedure ◽  
Engine Performance ◽  
Pollutant Emissions ◽  
Engine Model ◽  
Performance And Emissions ◽  
And Performance ◽  
Transient Operations ◽  
The Impact

Nowadays, internal combustion engine developments are focused on efficiency optimization and emission reduction. Increasing focus on world harmonized ways to determine the performance and emissions on Worldwide harmonized Light vehicles Test Procedure cycles, it is essential to optimize the engines for transient operations. To achieve these objectives, the downsized or downspeeded engines are required, which can reduce fuel consumption and pollutant emissions. However, these technologies ask for efficient charging systems. This article consists of the study of different boosting architectures (single stage and two stage) with a combination of different charging systems like superchargers and e-boosters. A parametric study has been carried out with a zero-dimensional engine model to analyze and compare different architectures on the different engine displacements. The impact of thermomechanical limits, turbo sizes and other engine development option characterizations is proposed to improve fuel consumption, maximum power and performance of the downsized/downspeeded diesel engines during the transient operations.

Sign in / Sign up

Export Citation Format

Share Document