scholarly journals Does the presence of maxillary midline diastema influence the perception of dentofacial esthetics in video analysis?

2020 ◽  
Vol 91 (1) ◽  
pp. 54-60
Author(s):  
Priscila Rios Bomfim Chaves ◽  
Alexandre Melo Karam ◽  
Andre Wilson Machado
Keyword(s):  
Analysis Of Variance ◽  
Video Analysis ◽  
Acrylic Resin ◽  
Anterior Region ◽  
Frontal View ◽  
Visual Analog Scales ◽  
Level Of Significance ◽  
Smile Esthetics ◽  
Post Hoc ◽  
The Ideal

ABSTRACT Objective To evaluate the influence of a midline diastema on dentofacial esthetic perceptions of orthodontists, restorative dental specialists or prosthodontists, and laypersons in a frontal facial evaluation performed by means of video. Materials and Methods Two individuals aged between 20 and 25 years, one of each gender, with presence of a midline diastema were selected. An acrylic resin mockup was made of the maxillary anterior region, simulating ideal conditions of smile esthetics. Four standardized frontal view videos of the complete face were filmed of each individual in the following situations: with the ideal smile (unchanged mockup) and with the presence of midline diastemas of 0.5, 1.0, and 1.5 mm created by the mockup. In all videos, the patient said a certain sentence and, at the end, simulated a posed smile. Dentofacial esthetic perceptions of all four videos of each individual were evaluated by 51 orthodontists, 51 restorative dental specialists or prosthodontists, and 51 laypersons by means of visual analog scales. Data were evaluated using analysis of variance and Tukey post hoc test, with the level of significance set at 5%. Results The most attractive videos for all groups of examiners were those without diastema and with a diastema of 0.5 mm, for both the woman and the man. For a diastema of 1 mm or 1.5 mm, the dentofacial characteristics were considered unesthetic. Conclusions Diastemas equal to or greater than 1 mm negatively influence dentofacial esthetics in a frontal facial evaluation performed by means of video.

scholarly journals Influence of maxillary canine torque variations on the perception of smile esthetics among orthodontists and laypersons

2019 ◽  
Vol 24 (1) ◽  
pp. 53-61 ◽  
Author(s):  
Thiago Correia Barbosa Lemos ◽  
Juliana de Brito Vasconcelos ◽  
Bianca Mota dos Santos ◽  
Andre Wilson Machado
Keyword(s):  
Analysis Of Variance ◽  
T Test ◽  
Test Results ◽  
Maxillary Canine ◽  
Visual Analog Scales ◽  
Significant Difference ◽  
Unpaired Student ◽  
Full Face ◽  
Smile Esthetics ◽  
Post Hoc

ABSTRACT Objective: The purpose of this study was to determine the perception of smile esthetics among orthodontists and laypersons with respect to unilateral maxillary canine torque variations in a frontal smile analysis. Methods: Full face and close-up smile photographs of two subjects (1 man and 1 woman) were used. Both smiles displayed healthy maxillary anterior dentitions. The images were digitally altered to obtain a bilateral 0° torque in the maxillary canines. From this image, unilateral variations of the left canine were made with -15°, -10°, -5°, 0°, +5°, +10° and +15°. Final images were randomly assembled into an album that was given to 53 orthodontists and 53 laypersons. Each rater was asked to evaluate the attractiveness of the images using visual analog scales. Data collected were statistically analyzed with one-way analysis of variance with Tukey post-hoc test and the unpaired Student t test. Results: For orthodontists, most attractive smiles were those with 0°, -5° and -10°. For laypersons, most attractive smiles were those with 0°, -5°, -10°, -15° and + 5°. For both groups, the lowest scores were given for the smiles with +10° and +15° torque. When comparing the perceptions of the orthodontists and laypersons, they did not show statistical differences in most situations. Moreover, in general, there was no significant difference between the full-face and close-up assessments of the smiles. Conclusions: The present findings indicated that smiles with unilateral palatal (negative values) maxillary canine torque variations were more tolerated than smiles with buccal crown torque (positive values) variations.

scholarly journals Do different vertical positions of maxillary central incisors influence smile esthetics perception?

2017 ◽  
Vol 22 (2) ◽  
pp. 95-105 ◽  
Author(s):  
Erica Bretas Cabral Menezes ◽  
Marcos Alan Vieira Bittencourt ◽  
Andre Wilson Machado
Keyword(s):  
Analysis Of Variance ◽  
Visual Analog Scale ◽  
Vertical Position ◽  
Adult Women ◽  
Test Results ◽  
Central Incisor ◽  
Analog Scale ◽  
Full Face ◽  
Smile Esthetics ◽  
Post Hoc

ABSTRACT INTRODUCTION: The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. METHODS: Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. RESULTS: The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. CONCLUSION: The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded.

scholarly journals Perception of midline deviations in smile esthetics by laypersons

2016 ◽  
Vol 21 (6) ◽  
pp. 51-57 ◽  
Author(s):  
Jamille Barros Ferreira ◽  
Licínio Esmeraldo da Silva ◽  
Márcia Tereza de Oliveira Caetano ◽  
Andrea Fonseca Jardim da Motta ◽  
Adriana de Alcantara Cury-Saramago ◽  
...  
Keyword(s):  
Multiple Comparisons ◽  
Wilcoxon Test ◽  
Frontal View ◽  
Analog Scale ◽  
Adjacent Structures ◽  
Student’S T ◽  
Level Of Significance ◽  
Smile Esthetics ◽  
Almost All ◽  
Student’S T Test

ABSTRACT Objective: To evaluate the esthetic perception of upper dental midline deviation by laypersons and if adjacent structures influence their judgment. Methods: An album with 12 randomly distributed frontal view photographs of the smile of a woman with the midline digitally deviated was evaluated by 95 laypersons. The frontal view smiling photograph was modified to create from 1 mm to 5 mm deviations in the upper midline to the left side. The photographs were cropped in two different manners and divided into two groups of six photographs each: group LCN included the lips, chin, and two-thirds of the nose, and group L included the lips only. The laypersons performed the rate of each smile using a visual analog scale (VAS). Wilcoxon test, Student’s t-test and Mann-Whitney test were applied, adopting a 5% level of significance. Results: Laypersons were able to perceive midline deviations starting at 1 mm. Statistically significant results (p< 0.05) were found for all multiple comparisons of the values in photographs of group LCN and for almost all comparisons in photographs of group L. Comparisons between the photographs of groups LCN and L showed statistically significant values (p< 0.05) when the deviation was 1 mm. Conclusions: Laypersons were able to perceive the upper dental midline deviations of 1 mm, and above when the adjacent structures of the smiles were included. Deviations of 2 mm and above when the lips only were included. The visualization of structures adjacent to the smile demonstrated influence on the perception of midline deviation.

scholarly journals Does the presence of maxillary central incisor edge asymmetry influence the perception of dentofacial esthetics in video analysis?

2019 ◽  
Vol 89 (5) ◽  
pp. 775-780 ◽  
Author(s):  
Marcio Costa Sobral ◽  
Iêda Margarida Crusoé-Rebello ◽  
Andre Wilson Machado
Keyword(s):  
Video Analysis ◽  
Acrylic Resin ◽  
Tooth Wear ◽  
Central Incisor ◽  
Maxillary Central Incisor ◽  
Visual Analog Scales ◽  
Incisal Edge ◽  
The One ◽  
Full Face ◽  
Different Levels

ABSTRACT Objective: To investigate the influence of incisal edge asymmetry of the maxillary central incisors on dentofacial esthetics among orthodontists, prosthodontists, and laypersons using video analysis. Materials and Methods: Full-face films of a 52-year-old afro-descendant woman displaying various levels of incisal wear in the esthetic zone were captured. An acrylic resin mockup was made of the maxillary anterior region, enabling the reproduction of an attractive smile and restoring tooth wear. Four different levels of incisal asymmetry between the upper central incisors in 0.5 mm increments were prepared from this mockup. A film was made for each level of asymmetry (0.5, 1.0, 1.5, and 2.0) and one with no asymmetry, with the patient repeating a sentence, totaling five films. After a pilot study and sample calculation, the films were evaluated by 138 examiners: 46 orthodontists, 46 laypeople, and 46 prosthodontists. Each examiner evaluated the dentofacial esthetics of each film using visual analog scales. Data collected were statistically analyzed. Results: Highest scores were awarded to the film with no asymmetry between upper centrals and the one with 0.5 mm of asymmetry. The asymmetries of 1.5 mm and 2.0 mm had the lowest scores from all three groups. Conclusions: The results of this video analysis indicate that asymmetries equal to or greater than 1.0 mm between the upper central incisors edges jeopardize dentofacial esthetics.

scholarly journals Perceptions of Altered Smile Esthetics: A Comparative Evaluation in Orthodontists, Dentists, and Laypersons

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Amjad Al Taki ◽  
Mohammed Khalesi ◽  
Muftah Shagmani ◽  
Islam Yahia ◽  
Fatma Al Kaddah
Keyword(s):  
Central Incisor ◽  
Crown Length ◽  
Crown Width ◽  
General Dentists ◽  
Smile Esthetics ◽  
Post Hoc ◽  
Buccal Corridor ◽  
One Way Anova ◽  
Dental Professionals ◽  
The Ideal

Objective. The current investigation was proposed to determine the impression of trained dental professionals and laypeople towards the modified smile esthetics.Materials and Methods. Twenty-six images were randomized in a survey and graded according to attractiveness by the orthodontists, general dentists, and laypeople. Photographs of gingival display, midline diastema, central incisor crown length, and lateral incisor crown width were manipulated with five minor changes in each. For smile arc and buccal corridor, two major changes were incorporated besides the ideal photograph. One-way ANOVA and Post Hoc analysis of the responses were measured for each group.Results. Most evaluators opined that the ideal smile in each category was the most acceptable. Orthodontists were more perceptive and exacting in accepting variations in the smile arc and buccal corridors. Dental professionals and laypeople indicated that either complete absence or a 0.5 mm of alterations in a gingival display, midline diastema, and crown length makes a smile beautiful and pleasant. Changes in crown width were not perceivable by all the three groups.Conclusion. Eastern Arabic laymen are more conscious about alterations in gingival display, midline diastema, and crown length in their smile. Hence, the orthodontist should pay attention to these factors during any orthodontic treatment.

scholarly journals Profile of relative strength among various weight categories of senior national women weightlifters

2019 ◽  
Vol 5 (4) ◽  
pp. 19-24
Author(s):  
V. F. Peter ◽  
Suhel Raza
Keyword(s):  
Body Weight ◽  
Standard Deviation ◽  
Analysis Of Variance ◽  
Relative Strength ◽  
Anova Analysis ◽  
Low Weight ◽  
Significant Difference ◽  
Level Of Significance ◽  
Post Hoc ◽  
One Way Anova

The purpose of this study was purposively selected from the “Senior National Championship for the year 2018. Only women weightlifters participated in various weight categories, acted as the subjects. The age of the subjects ranged from 18-34 years. The total subjects were N=54, which were divided into three (3) groups of eighteen (18) subjects for each group. The first groups were low weight categories (48 kg. & 53 kg.), Second groups were middleweight categories (63 kg, 69 kg.) and third groups were upper group weight categories (90 kg, +90 kg.). In order to measure the relative strength of various lifters of different groups, the data was collected from the results of “Senior National Championship” Mangalore, Karnataka 21st to 25 January 2018. Descriptive Statistic (Mean, Standard Deviation), One-way, ANOVA (Analysis of variance) with post hoc test (LSD) was applied to analyze and compare the relative strength among the different body weight categories. The level of significance was set at 0.05. 3 indicate that there were significant differences in the entire three groups. However, group Lower had higher relative strength. After applying the post Hoc Test (LSD) it was found that there was a significant difference in all three groups in their relative strength.

Influence of moderate cigarette-smoking on the peri-implant clinicoradiographic inflammatory parameters around cement- and screw-retained dental implants

2020 ◽  
Author(s):  
Mana Alqahtani
Keyword(s):  
Cigarette Smoking ◽  
Dental Implants ◽  
Smoking History ◽  
Inflammatory Parameters ◽  
Significant Difference ◽  
Implant Retention ◽  
Level Of Significance ◽  
Soft Tissue Inflammation ◽  
Post Hoc ◽  
Adjustment Test

The aim was to assess the influence of moderate cigarette-smoking on the clinical (bleeding on probing [BoP] and probing depth [PD]) and radiographic (crestal bone resorption [CBR]) around cement- and screw-retained dental implants at 5 years’ follow-up. A questionnaire was used to collect information about age, gender, smoking history, duration of implants in function, jaw location of the implant, and daily toothbrushing and flossing. Peri-implant BoP, PD and CBR were measured in all groups. Group comparisons were performed using one-way analysis of variance and for multiple comparisons, the Bonferroni Post hoc adjustment test was performed. Level of significance was set at P&lt;0.05. Forty-eight patients (25 smokers and 23 non-smokers) had cement-retained dental implants; and 48 (24 smokers and 24 non-smokers) had screw-retained dental implants. Among patients with cement and screw-retained dental implants, PD (P&lt;0.05) and CBR (P&lt;0.05) were significantly higher among smokers than non-smokers. The peri-implant sites that demonstrated BoP were statistically significantly higher among non-smokers (P&lt;0.05) than smokers among patients with cement- and screw-retained dental implants. There was no statistically significant difference in peri-implant PD and CBR among smokers with cement- and screw-retained dental implants. Among non-smokers with cement and screw-retained dental implants, there was no statistically significant difference in BoP, PD and CBR. Cigarette-smoking is associated with an increased PD and CBR around cement- and screw-retained dental implants. Cigarette-smoking increases peri-implant soft tissue inflammation as well as loss of crestal bone and this relationship is independent of the type of implant retention protocol used.The author recommends that cement- and screw-retained dental implants are suitable for prosthesis restoration in non-smokers. Further studies on dual-smokers (individuals smoking cigarettes and other forms of tobacco products) are needed related to the clinicoradiographic inflammatory parameters around cement- and screw-retained dental implants

Psychophysically Based Physical Capability Limits For Right Angle Power Tool Operation

2020 ◽  
Vol 64 (1) ◽  
pp. 910-914
Author(s):  
Jonathan Valencia ◽  
Joel Cort
Keyword(s):  
Analysis Of Variance ◽  
The Other ◽  
Mixed Design ◽  
Joint Orientation ◽  
Physical Capability ◽  
Subject Variables ◽  
Group A ◽  
Repeated Analysis ◽  
Post Hoc

A psychophysical methodology was utilized to examine 40 non-skilled female participants performing right-angle power tool (RAPT) fastening tasks. A combination of two between subject variables were examined for a total of four between-subject groups: joint orientation (horizontal and vertical planes) and joint hardness (hard and soft joints). Participants were evenly distributed into one of four joint orientation- hardness groups. Within each group, a combination of three fastening strategies and three fastening frequencies were performed by each participant. The chosen target torque determined the physical capability limits (PCL). A mixed-design repeated analysis of variance with Tukey’ significance post hoc test were used to determine any significance with the measured variables ( p<0.05). Fastening strategy and frequency influenced the chosen torque magnitude. Participants chose significantly higher target torques with the Turbo Tight strategy in comparison to the other two strategies. Furthermore, participants chose to accept lower target torques and forces as fastening frequency increased.

scholarly journals Characteristics of anteroposterior curvatures of the spine in soccer and futsal players

2017 ◽  
Vol 18 (4) ◽  
Author(s):  
Krystyna Chromik ◽  
Anna Burdukiewicz ◽  
Jadwiga Pietraszewska ◽  
Aleksandra Stachoń ◽  
Paweł Wolański ◽  
...  
Keyword(s):  
College Students ◽  
Statistical Analysis ◽  
Injury Prevention ◽  
Analysis Of Variance ◽  
Statistical Significance ◽  
Body Posture ◽  
Soccer Players ◽  
Prevention Training ◽  
The Difference ◽  
Post Hoc

AbstractPurpose. The aim of the study was to determine differences in anteroposterior spine curvatures between futsal players, soccer players, and non-training students. The results may contribute to the development of present-day knowledge of posturometry, and its implementation in training can help reduce the risk of body posture disorders in athletes. Methods. The examined group consisted of 48 athletes and 38 non-training college students. Body posture parameters were measured with the use of Posturometr-S. The normality of distribution was checked with the Shapiro-Wilk test, and the differences between the groups were measured with ANOVA and the Bonferroni post-hoc test. The level of statistical significance was set at p < 0.05. Results. The analysis of angle values revealed the widest and most similar measurements in the group of futsal players and soccer players. The analysis of variance proved statistically significant differences between the soccer players and futsal players (p = 0.003). The difference between the soccer players and non-training students was statistically significant. The highest γ angular value was measured in non-training students, followed by futsal players and soccer players. The statistical analysis revealed significant differences between the non-training students and futsal players, as well as non-training students and soccer players (p < 0.001). Conclusions. A complex assessment of athletes’ body posture is crucial in injury prevention. Training overloads may often lead to disorders of the organ of locomotion and affect the correct body posture in athletes. This, in turn, may result in pains and injuries.

The Effect of Dentin Desensitizer on Shear Bond Strength of Conventional and Self-adhesive Resin Luting Cements After Aging

2011 ◽  
Vol 36 (5) ◽  
pp. 492-501 ◽  
Author(s):  
B Stawarczyk ◽  
R Hartmann ◽  
L Hartmann ◽  
M Roos ◽  
M Özcan ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Water Storage ◽  
Acrylic Resin ◽  
Luting Cements ◽  
Relyx Unicem ◽  
Aging Conditions ◽  
Post Hoc ◽  
The Impact ◽  
Panavia 21

SUMMARY This study tested the impact of Gluma Desensitizer on the shear bond strength (SBS) of two conventional (RelyX ARC, Panavia 21) and two self-adhesive (RelyX Unicem, G-Cem) resin luting cements after water storage and thermocycling. Human third molars (N=880) were embedded in acrylic resin. The buccal dentin was exposed. Teeth were randomly divided into four main groups, and the following cements were adhered: 1) RelyX ARC, 2) Panavia 21, 3) RelyX Unicem, and 4) G-Cem. In half of the teeth in each group, dentin was treated with Gluma Desensitizer. In the conventional cement groups, the corresponding etchant and adhesive systems were applied. SBS of the cements was tested after 1 hour (initial); at 1, 4, 9, 16, and 25 days of water storage; and at 1, 4, 9, 16, and 25 days of thermocycling. SBS data were analyzed by one-way analysis of variance (ANOVA); this was followed by the post hoc Scheffé test and a t-test. Overall, the highest mean SBS (MPa) was obtained by RelyX ARC (ranging from 14.6 ± 3.9 to 17.6 ± 5.2) and the lowest by Panavia 21 in combination with Gluma Desensitizer (ranging from 0.0 to 2.9 ± 1.0). All tested groups with and without desensitizer showed no significant decrease after aging conditions compared with baseline values (p&gt;0.05). Only the Panavia 21/Gluma Desensitizer combination showed a significant decrease after 4 days of thermocyling compared with initial values and 1 day thermocycling. Self-adhesive cements with Gluma Desensitizer showed increased SBS after aging conditions (ranging from 7.4 ± 1.4 to 15.2 ± 3) compared with groups without desensitizer (ranging from 2.6 ± 1.2 to 8.8 ± 2.9). No cohesive failures in dentin were observed in any of the test groups. Although self-adhesive cements with and without desensitizer presented mainly adhesive failures after water storage (95.8%) and thermocyling (100%), conventional cement (RelyX ARC) showed mainly mixed failures (90.8% and 89.2%, after water storage and thermocyling, respectively). Application of the Gluma Desensitizer to dentin before cementation had a positive effect on the SBS of self-adhesive cements.

Sign in / Sign up

Export Citation Format

Share Document