scholarly journals Comparison of the effects of micro-osteoperforation and corticision on the rate of orthodontic tooth movement in rats

2015 ◽  
Vol 86 (4) ◽  
pp. 558-564 ◽  
Author(s):  
Chi-Yang Tsai ◽  
Teng-Kai Yang ◽  
Hsueh-Yin Hsieh ◽  
Liang-Yu Yang
Keyword(s):  
Bone Density ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Total Duration ◽  
Orthodontic Tooth Movement ◽  
Control Group ◽  
Sprague Dawley ◽  
Mineral Density ◽  
Orthodontic Force ◽  
Surgical Interventions

ABSTRACT Objective:  To investigate the effects of flapless micro-osteoperforation and corticision on the rate of orthodontic tooth movement in rats. Materials and Methods:  Forty-five 8-week-old male Sprague-Dawley rats were divided into the following groups: micro-osteoperforation and orthodontic force (MOP + F), corticision and orthodontic force (C + F), and orthodontic force only (F, control). The left maxillary first molars were pulled forward with a force of 50 g. Flapless surgical interventions were conducted in the MOP + F and C + F groups. The total duration of the experiment was 6 weeks. Alveolar bone density and the number of osteoclasts were evaluated using microcomputed tomography and histologic examination, respectively. Results:  The tooth movement distance was significantly higher in both experimental groups than in the control group. Bone density and bone mineral density decreased in the MOP + F and C + F groups. The number of osteoclasts in the MOP + F and C + F groups was significantly higher than in the control group F. Conclusion:  The two minimally invasive flapless surgical interventions increased bone remodeling and osteoclast activity and induced faster orthodontic tooth movement for at least 2 weeks in rats. No differences were observed between the outcome of flapless micro-osteoperforation and corticision in the rats.

scholarly journals A Novel Method to Quantify Longitudinal Orthodontic Bone Changes with In Vivo Micro-CT Data

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Chao Wang ◽  
Li Cao ◽  
Chongshi Yang ◽  
Yubo Fan
Keyword(s):  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Bone Modeling ◽  
Micro Ct ◽  
Sprague Dawley ◽  
Mineral Density ◽  
Bone Changes ◽  
Novel Method

Orthodontic tooth movement (OTM) is the result of region-specific bone modeling under a load. Quantification of this change in the alveolar bone around a tooth is a basic requirement to understand the mechanism of orthodontics. The purpose of this study was to quantify subregional alveolar bone changes during orthodontic tooth movement with a novel method. In this study, 12 Sprague-Dawley (SD) rats were used as an orthodontic model, and one side of the first upper molar was used to simulate OTM. The alveolar bone around the mesial root was reconstructed from in vivo micro-CT images and separated from other parts of the alveolar bone with two semicylinder filters. The amount and rate of OTM, bone mineral density (BMD), and bone volume (BV) around the root were calculated and compared at 5 time points. The results showed that the amount of tooth movement, BMD, and BV can be evaluated dynamically with this method. The molar moved fastest during the first 3 days, and the rate decreased after day 14. BMD decreased from day 0 to day 14 and returned from day 14 to day 28. BV deceased from day 0 to day 7 and from day 14 to day 28. The method created in this study can be used to accurately quantify dynamic alveolar bone changes during OTM.

scholarly journals Effects of Corticision on Paradental Remodeling in Orthodontic Tooth Movement

2009 ◽  
Vol 79 (2) ◽  
pp. 284-291 ◽  
Author(s):  
Su-Jung Kim ◽  
Young-Guk Park ◽  
Seung-Goo Kang
Keyword(s):  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Control Group ◽  
Orthodontic Force ◽  
Alveolar Bone Remodeling ◽  
Biologic Effects ◽  
Group A ◽  
Group B ◽  
Tissue Specimens

Abstract Objective: To investigate the biologic effects of Corticision on alveolar remodeling in orthodontic tooth movement. Materials and Methods: In this study, 16 cats were divided into 3 groups: group A, only orthodontic force (control); group B, orthodontic force plus Corticision; and group C, orthodontic force plus Corticision and periodic mobilization. Histologic and histomorphometric studies were performed on tissue specimens on days 7, 14, 21, and 28. Results: Extensive direct resorption of bundle bone with less hyalinization and more rapid removal of hyalinized tissue were observed in group B. The accumulated mean apposition area of new bone on day 28 was observed to be 3.5-fold higher in group B than in the control group A. Conclusions: Corticision might be an efficient procedure for accelerating orthodontic tooth movement accompanied with alveolar bone remodeling.

scholarly journals Effect of caffeine in chocolate (Theobroma cacao) on the alveolar bone mineral density in guinea pigs (Cavia cobaya) with orthodontic tooth movement

2020 ◽  
Vol 53 (3) ◽  
pp. 164
Author(s):  
Bramita Beta Arnanda ◽  
Sri Suparwitri ◽  
Pinandi Sri Pudyani
Keyword(s):  
Bone Mineral Density ◽  
Bone Mineral ◽  
Guinea Pigs ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Control Group ◽  
Mineral Density ◽  
Caffeine Consumption ◽  
Group B

Background: The benefits of chocolate have attracted significant attention from clinicians, especially the active compound of caffeine on bone metabolism. The bone density significantly affected the rate of tooth movement. Purpose: This study aims to analyse the effect of the dose and the duration of caffeine consumption in chocolate on alveolar bone mineral density in orthodontic tooth movement. Methods: Forty-eight male guinea pigs (Cavia cobaya) aged between 3-4 months and weighing 300-350 grams were divided into four groups (group A control, group B caffeine dose of 2.3 mg, group C caffeine dose of 3.45 mg, and group D caffeine dose of 4.6 mg). An open coil spring was applied to the mandibular inter-incisor with an orthodontic force of 35 grams. Guinea pigs were sacrificed using lethal doses of anaesthetics on days 0, 1, 7, and 14 after an orthodontic appliance installation. Mandibular alveolar bone mineral density in compression sites was analysed with an atomic absorption spectrophotometer (AAS). Experiment data results were analysed using two-way ANOVA with a 95% degree of confidence. Results: Caffeine consumption with a dose of 4.6 mg on day 7 had the lowest alveolar bone mineral density and the highest was at a dose of 2.3 mg on day 14, but there were no differences between the dose groups, the duration groups and interactions between both of them (p>0.05). Conclusion: The consumption of caffeine in chocolate did not decrease the bone mineral density in the compression site of orthodontic tooth movement.

scholarly journals Effects of bone regeneration materials and tooth movement timing on canine experimental orthodontic treatment

2017 ◽  
Vol 88 (2) ◽  
pp. 171-178 ◽  
Author(s):  
Ferdinand Mabula Machibya ◽  
Yiyuan Zhuang ◽  
Weizhong Guo ◽  
Dongdong You ◽  
Shan Lin ◽  
...  
Keyword(s):  
Bone Density ◽  
Bone Regeneration ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Bone Defects ◽  
Control Group ◽  
Bone Level ◽  
Bone Height ◽  
Radiologic Features

ABSTRACT Objectives: To evaluate the effects of bone regeneration materials and orthodontic tooth movement (OTM) timing on tooth movement through alveolar bone defects treated with guided bone regeneration (GBR) utilizing xenografts (Bio-Oss) and alloplast (β-TCP). Materials and Methods: Twenty-four standard alveolar bone defects in six male beagle dogs were treated by GBR using either Bio-Oss or β-TCP (experimental), whereas the control defects were left empty. The defects were further grouped into early or late subgroups, depending on OTM timing after GBR (ie 1 month or 2 months, respectively). Rates of OTM were measured intraorally, while computed tomography scan images were used to assess bone density, alveolar bone height, second premolar displacement, and tipping tendency. Results: Generally, the Bio-Oss early and Bio-Oss late subgroups recorded the lowest amount of tooth movement compared with other modes of GBRs assessed. Before OTM, the control group registered significantly lower bone height compared with the Bio-Oss and β-TCP groups (P < .01). The control group was inferior on bone density and bone height compared with Bio-Oss and β-TCP. Conclusions: The Bio-Oss group had favorable radiologic features (higher alveolar bone level and bone density with less premolar tipping) but showed slower OTM than the control group. The late OTM subgroup had favorable radiologic features and showed faster tooth movement than the early OTM in the β -TCP group.

Orthodontic Force–Induced BMAL1 in PDLCs Is a Vital Osteoclastic Activator

2021 ◽  
pp. 002203452110199
Author(s):  
Y. Xie ◽  
Q. Tang ◽  
S. Yu ◽  
W. Zheng ◽  
G. Chen ◽  
...  
Keyword(s):  
Bone Remodeling ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Nuclear Factor Κb ◽  
Periodontal Ligament Cells ◽  
Orthodontic Force ◽  
Periodontal Tissues ◽  
Alveolar Bone Remodeling ◽  
Biomechanical Stimuli

Orthodontic tooth movement (OTM) depends on periodontal ligament cells (PDLCs) sensing biomechanical stimuli and subsequently releasing signals to initiate alveolar bone remodeling. However, the mechanisms by which PDLCs sense biomechanical stimuli and affect osteoclastic activities are still unclear. This study demonstrates that the core circadian protein aryl hydrocarbon receptor nuclear translocator–like protein 1 (BMAL1) in PDLCs is highly involved in sensing and delivering biomechanical signals. Orthodontic force upregulates BMAL1 expression in periodontal tissues and cultured PDLCs in manners dependent on ERK (extracellular signal–regulated kinase) and AP1 (activator protein 1). Increased BMAL1 expression can enhance secretion of CCL2 (C-C motif chemokine 2) and RANKL (receptor activator of nuclear factor–κB ligand) in PDLCs, which subsequently promotes the recruitment of monocytes that differentiate into osteoclasts. The mechanistic delineation clarifies that AP1 induced by orthodontic force can directly interact with the BMAL1 promoter and activate gene transcription in PDLCs. Localized administration of the ERK phosphorylation inhibitor U0126 or the BMAL1 inhibitor GSK4112 suppressed ERK/AP1/BMAL1 signaling. These treatments dramatically reduced osteoclastic activity in the compression side of a rat orthodontic model, and the OTM rate was almost nonexistent. In summary, our results suggest that force-induced expression of BMAL1 in PDLCs is closely involved in controlling osteoclastic activities during OTM and plays a vital role in alveolar bone remodeling. It could be a useful therapeutic target for accelerating the OTM rate and controlling pathologic bone-remodeling activities.

scholarly journals The role of inhibition of osteocyte apoptosis in mediating orthodontic tooth movement and periodontal remodeling: a pilot study

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Michele Kaplan ◽  
Zana Kalajzic ◽  
Thomas Choi ◽  
Imad Maleeh ◽  
Christopher L. Ricupero ◽  
...  
Keyword(s):  
Bone Density ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Tartrate Resistant Acid Phosphatase ◽  
Osteocyte Apoptosis ◽  
Saline Administration ◽  
Group 2 ◽  
Group 1

Abstract Background Orthodontic tooth movement (OTM) has been shown to induce osteocyte apoptosis in alveolar bone shortly after force application. However, how osteocyte apoptosis affects orthodontic tooth movement is unknown. The goal of this study was to assess the effect of inhibition of osteocyte apoptosis on osteoclastogenesis, changes in the alveolar bone density, and the magnitude of OTM using a bisphosphonate analog (IG9402), a drug that affects osteocyte and osteoblast apoptosis but does not affect osteoclasts. Material and methods Two sets of experiments were performed. Experiment 1 was used to specifically evaluate the effect of IG9402 on osteocyte apoptosis in the alveolar bone during 24 h of OTM. For this experiment, twelve mice were divided into two groups: group 1, saline administration + OTM24-h (n=6), and group 2, IG9402 administration + OTM24-h (n=6). The contralateral unloaded sides served as the control. The goal of experiment 2 was to evaluate the role of osteocyte apoptosis on OTM magnitude and osteoclastogenesis 10 days after OTM. Twenty mice were divided into 4 groups: group 1, saline administration without OTM (n=5); group 2, IG9402 administration without OTM (n=5); group 3, saline + OTM10-day (n=6); and group 4, IG9402 + OTM10-day (n=4). For both experiments, tooth movement was achieved using Ultra Light (25g) Sentalloy Closed Coil Springs attached between the first maxillary molar and the central incisor. Linear measurements of tooth movement and alveolar bone density (BVF) were assessed by MicroCT analysis. Cell death (or apoptosis) was assessed by terminal dUTP nick-end labeling (TUNEL) assay, while osteoclast and macrophage formation were assessed by tartrate-resistant acid phosphatase (TRAP) staining and F4/80+ immunostaining. Results We found that IG9402 significantly blocked osteocyte apoptosis in alveolar bone (AB) at 24 h of OTM. At 10 days, IG9402 prevented OTM-induced loss of alveolar bone density and changed the morphology and quality of osteoclasts and macrophages, but did not significantly affect the amount of tooth movement. Conclusion Our study demonstrates that osteocyte apoptosis may play a significant role in osteoclast and macrophage formation during OTM, but does not seem to play a role in the magnitude of orthodontic tooth movement.

scholarly journals The Administration of 4-Hexylresorcinol Accelerates Orthodontic Tooth Movement and Increases the Expression Level of Bone Turnover Markers in Ovariectomized Rats

2020 ◽  
Vol 21 (4) ◽  
pp. 1526 ◽  
Author(s):  
Kwang-Hyo Choi ◽  
Dae-Won Kim ◽  
Suk Keun Lee ◽  
Seong-Gon Kim ◽  
Tae-Woo Kim
Keyword(s):  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Ovariectomized Rats ◽  
Control Group ◽  
Tartrate Resistant Acid Phosphatase ◽  
Sprague Dawley ◽  
Osteogenic Markers ◽  
Surgical Methods ◽  
Elevated Expression ◽  
Turnover Markers

Surgical methods for accelerating orthodontic tooth movement are limited by possible damage to the tooth root and patient discomfort. 4-Hexylresorcinol (4HR) has been shown to increase bone remodeling and may potentially facilitate tooth movement. This study investigated the (1) effect of 4HR administration on osteoblast-like cells and (2) effect of 4HR administration on tooth movement in ovariectomized rats. Saos-2 cells were treated with either 4HR or solvent (control). Protein expression levels were investigated 2, 8, and 24 h after treatment. Thirty ovariectomized Sprague-Dawley rats were divided into two experimental groups (A and B) and one control group. After installation of an orthodontic tooth movement device, groups A and B received subcutaneous weekly injections of 4HR (1.28 and 128 mg/kg). Micro-computerized tomography and histological analyses were performed after 2 weeks of tooth movement. The application of 4HR elevated expression of osteogenic markers in Saos-2 cells. Movement of the first molars was significantly greater in rats administered 4HR. Furthermore, the expression of bone morphogenic protein-2, receptor activator of nuclear factor kappa-B ligand, osteocalcin, and tartrate-resistant acid phosphatase were increased after 4HR administration. 4HR application demonstrated increased expression of osteogenic markers in Saos-2 cells and accelerated orthodontic tooth movement in rats.

scholarly journals Bone dehiscence formation during orthodontic tooth movement through atrophic alveolar ridges

2019 ◽  
Vol 90 (3) ◽  
pp. 321-329
Author(s):  
Adilson Luiz Ramos ◽  
Monique Cimão dos Santos ◽  
Márcio Rodrigues de Almeida ◽  
Carlos Flores Mir
Keyword(s):  
Null Hypothesis ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Linear Regression Analysis ◽  
Orthodontic Tooth Movement ◽  
Wilcoxon Test ◽  
Control Group ◽  
Multivariate Linear Regression Analysis ◽  
Alveolar Ridge ◽  
Bone Height

ABSTRACT Objectives To test the null hypothesis that there is no difference in bone dehiscence formation before and after orthodontic tooth movement through an atrophic alveolar ridge. Material and Methods This longitudinal retrospective study evaluated pretreatment and posttreatment cone-beam computed tomography imaging of 15 adult patients. Twenty-five teeth were moved through the atrophic alveolar bone, whereas 25 teeth not subjected to translational movement were considered controls. The distances between the cementoenamel junction and the alveolar bone crest were assessed at the mesial, distal, buccal, and lingual surfaces of all of these teeth. Data were compared using the Wilcoxon test. The Spearman correlation test and multivariate linear regression analysis were also performed. Results In general, crestal bone height was reduced around 0.5 mm in all groups in every direction. Median buccal dehiscence increased significantly (+2.25 mm) (P < .05) in teeth moved through the atrophic ridge. Control teeth also had buccal crest loss (+0.83 mm), but this was not statistically different from that of the experimental teeth. Lingual dehiscence increased significantly for the experimental (+0.17 mm) and control (+0.65 mm) groups. Mesial bone height decreased more in the control group (–0.44mm) than in the experimental group (–0.14mm). There was moderate correlation between amount of tooth movement and alveolar bone loss. Conclusions The null hypothesis was rejected as dehiscence increased after tooth movement through an atrophic alveolar ridge, mainly in the buccal plate.

scholarly journals A Novel Rat Model of Orthodontic Tooth Movement Using Temporary Skeletal Anchorage Devices: 3D Finite Element Analysis andIn VivoValidation

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Neelambar Kaipatur ◽  
Yuchin Wu ◽  
Samer Adeeb ◽  
Thomas Stevenson ◽  
Paul Major ◽  
...  
Keyword(s):  
Finite Element ◽  
Alveolar Bone ◽  
Tooth Movement ◽  
Orthodontic Tooth Movement ◽  
Von Mises Stress ◽  
Fe Model ◽  
Sprague Dawley ◽  
Element Analysis ◽  
Von Mises ◽  
The Right

The aim of this animal study was to develop a model of orthodontic tooth movement using a microimplant as a TSAD in rodents. A finite element model of the TSAD in alveolar bone was built usingμCT images of rat maxilla to determine the von Mises stresses and displacement in the alveolar bone surrounding the TSAD. Forin vivovalidation of the FE model, Sprague-Dawley rats (n=25) were used and a Stryker 1.2 × 3 mm microimplant was inserted in the right maxilla and used to protract the right first permanent molar using a NiTi closed coil spring. Tooth movement measurements were taken at baseline, 4 and 8 weeks. At 8 weeks, animals were euthanized and tissues were analyzed by histology and EPMA. FE modeling showed maximum von Mises stress of 45 Mpa near the apex of TSAD but the average von Mises stress was under 25 Mpa. Appreciable tooth movement of 0.62 ± 0.04 mm at 4 weeks and 1.99 ± 0.14 mm at 8 weeks was obtained. Histological and EPMA results demonstrated no active bone remodeling around the TSAD at 8 weeks depicting good secondary stability. This study provided evidence that protracted tooth movement is achieved in small animals using TSADs.

Optimization Spring Coil Design for Orthodontic Tooth Movement

2014 ◽  
Vol 493 ◽  
pp. 327-330
Author(s):  
Moch. Agus Choiron ◽  
Endi Sutikno ◽  
Tri Handoko Wicaksono ◽  
Shigeyuki Haruyama
Keyword(s):  
Alveolar Bone ◽  
Tooth Movement ◽  
Steel Wire ◽  
Orthodontic Tooth Movement ◽  
Maxillary Incisor ◽  
Coil Design ◽  
Hook Length ◽  
Orthodontic Force ◽  
Custom Made ◽  
Spring Coil

Orthodontic tooth movement is achieved by the remodeling of alveolar bone in response to mechanical loading by using spring coil. Spring coil design was made of round stainless steel wire and usually it was custom-made design. In the previous study, the orthodontic force on 30 gram is required to move maxillary incisor during experimental tooth movement in rat. In this study, optimization new design of spring coil is developed to fulfill the requirement of orthodontic force. The design variable of new spring coil design is set on variation of angle aperture (5oα 10o), hook length (10 mml20 mm) and hook diameter (0.012 inchD0.014 inch). From the result, it can be produced the optimum designs which 8.9oof angle aperture; 12 mm of hook length and 0.014 inch of hook diameter for fulfilling the requirement of orthodontic force on 30 gram force.

Sign in / Sign up

Export Citation Format

Share Document