scholarly journals Bioactive Surface Modification of Newly Developed β-Type Titanium Alloy for Biomedical Applications by Electrochemical Treatment

2006 ◽  
Vol 70 (4) ◽  
pp. 304-313
Author(s):  
Mitsuo Niinomi ◽  
Toshikazu Akahori ◽  
Hiroyuki Toda ◽  
Daisuke Iizuka ◽  
Hisao Fukui ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Surface Modification ◽  
Biomedical Applications ◽  
Electrochemical Treatment ◽  
Bioactive Surface Modification

scholarly journals Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications

Coatings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 249 ◽  
Author(s):  
Wei Liu ◽  
Shifeng Liu ◽  
Liqiang Wang
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Surface Modification ◽  
Microstructure Evolution ◽  
Biomedical Applications ◽  
Cellular Level ◽  
Implant Surface ◽  
Potential Applications ◽  
Biomedical Titanium Alloy ◽  
Increasing Demand

With the increasing demand for bone implant therapy, titanium alloy has been widely used in the biomedical field. However, various potential applications of titanium alloy implants are easily hampered by their biological inertia. In fact, the interaction of the implant with tissue is critical to the success of the implant. Thus, the implant surface is modified before implantation frequently, which can not only improve the mechanical properties of the implant, but also polish up bioactivity and osseoconductivity on a cellular level. This paper aims at reviewing titanium surface modification techniques for biomedical applications. Additionally, several other significant aspects are described in detail in this article, for example, micromorphology, microstructure evolution that determines mechanical properties, as well as a number of issues concerning about practical application of biomedical implants.

A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications

2014 ◽  
Vol 8 (2/3) ◽  
pp. 138 ◽  
Author(s):  
Mitsuo Niinomi ◽  
Masaaki Nakai ◽  
Junko Hieda ◽  
Ken Cho ◽  
Toshihiro Kasuga ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Surface Modification ◽  
Biomedical Applications ◽  
Low Modulus

Adhesion evaluation of nanostructured coatings on titanium alloy for biomedical applications

2017 ◽  
Author(s):  
Luiz Felipe Reali ◽  
Jianliang Lin ◽  
Ronghua Wei ◽  
Ricardo Torres ◽  
Carlos augusto Henning Laurindo ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Biomedical Applications ◽  
Nanostructured Coatings

scholarly journals Water uptake of various electrospun nonwovens

2020 ◽  
Vol 6 (3) ◽  
pp. 155-158
Author(s):  
Katharina Wulf ◽  
Volkmar Senz ◽  
Thomas Eickner ◽  
Sabine Illner
Keyword(s):  
Contact Angle ◽  
Surface Modification ◽  
Water Absorption ◽  
Water Uptake ◽  
Biomedical Applications ◽  
High Surface ◽  
Volume Ratio ◽  
Polymer Composition ◽  
Water Wetting ◽  
Morphology Changes

AbstractIn recent years, nanofiber based materials have emerged as especially interesting for several biomedical applications, regarding their high surface to volume ratio. Due to the superficial nano- and microstructuring and the different wettability compared to nonstructured surfaces, the water absorption is an important parameter with respect to the degradation stability, thermomechanic properties and drug release properties, depending on the type of polymer [1]. In this investigation, the water absorption of different non- and plasma modified biostable nanofiber nonwovens based on polyurethane, polyester and polyamide were analysed and compared. Also, the water absorption by specified water wetting, the contact angle and morphology changes were examined. The results show that the water uptake is highly dependent on the surface modification and the polymer composition itself and can therefore be partially changed.

scholarly journals Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2896
Author(s):  
Sara Ferraris ◽  
Silvia Spriano ◽  
Alessandro Calogero Scalia ◽  
Andrea Cochis ◽  
Lia Rimondini ◽  
...  
Keyword(s):  
Surface Modification ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Electrospun Fibers ◽  
Natural Polymers ◽  
Polymeric Fibers ◽  
Biological Phenomena ◽  
Proper Design ◽  
Synthetic And Natural Polymers ◽  
Selection Of

Electrospinning is gaining increasing interest in the biomedical field as an eco-friendly and economic technique for production of random and oriented polymeric fibers. The aim of this review was to give an overview of electrospinning potentialities in the production of fibers for biomedical applications with a focus on the possibility to combine biomechanical and topographical stimuli. In fact, selection of the polymer and the eventual surface modification of the fibers allow selection of the proper chemical/biological signal to be administered to the cells. Moreover, a proper design of fiber orientation, dimension, and topography can give the opportunity to drive cell growth also from a spatial standpoint. At this purpose, the review contains a first introduction on potentialities of electrospinning for the obtainment of random and oriented fibers both with synthetic and natural polymers. The biological phenomena which can be guided and promoted by fibers composition and topography are in depth investigated and discussed in the second section of the paper. Finally, the recent strategies developed in the scientific community for the realization of electrospun fibers and for their surface modification for biomedical application are presented and discussed in the last section.

Biocompatible Ceramic-Biopolymer Coatings Obtained by Electrophoretic Deposition on Electron Beam Structured Titanium Alloy Surfaces

2016 ◽  
Vol 879 ◽  
pp. 1552-1557
Author(s):  
C. Ramskogler ◽  
L. Cordero ◽  
Fernando Warchomicka ◽  
A.R. Boccaccini ◽  
Christof Sommitsch
Keyword(s):  
Titanium Alloy ◽  
Surface Modification ◽  
Electron Beam ◽  
Electrophoretic Deposition ◽  
Composite Coatings ◽  
Substrate Surface ◽  
3D Structure ◽  
Titania Nanoparticles ◽  
Structured Surfaces ◽  
Major Interest

An area of major interest in biomedical engineering is currently the development of improved materials for medical implants. Research efforts are being focused on the investigation of surface modification methods for metallic prostheses due to the fundamental bioinert character of these materials and the possible ion release from their surfaces, which could potentially induce the interfacial loosening of devices after implantation. Electron beam (EB) structuring is a novel technique to control the surface topography in metals. Electrophoretic deposition (EPD) offers the feasibility to deposit at room temperature a variety of materials on conductive substrates from colloidal suspensions under electric fields. In this work single layers of chitosan composite coatings containing titania nanoparticles (n-TiO2) were deposit by EPD on electron beam (EB) structured Ti6Al4V titanium alloy. Surface structures were designed following different criteria in order to develop specific topography on the Ti6Al4V substrate. n-TiO2 particles were used as a model particle in order to demonstrate the versatility of the proposed technique for achieving homogenous chitosan based coatings on structured surfaces. A linear relation between EPD time and deposition yield on different patterned Ti6Al4V surfaces was determined under constant voltage conditions, obtaining homogeneous EPD coatings which replicate the 3D structure (pattern) of the substrate surface. The present results show that a combination of both techniques can be considered a promising surface modification approach for metallic implants, which should lead to improved interaction between the implant surface and the biological environment for orthopaedic applications.

Formability of Hydroxyapatite on Beta-Type Ti-Nb-Ta-Zr Alloy for Biomedical Applications through Alkaline Treatment Process

2007 ◽  
Vol 352 ◽  
pp. 297-300
Author(s):  
Toshikazu Akahori ◽  
Mitsuo Niinomi ◽  
Masaaki Nakai
Keyword(s):  
Alkaline Solution ◽  
Biomedical Applications ◽  
Treatment Process ◽  
Solution Treatment ◽  
Sodium Titanate ◽  
Alkaline Treatment ◽  
Simple Method ◽  
Metallic Biomaterials ◽  
Naoh Solution ◽  
Bioactive Surface Modification

Titanium and its alloys have been widely used as biomaterials for hard tissue replacements because of their excellent mechanical properties and biocompatibility. However, the bonding between their surfaces and bone is not enough after implantation. The bioactive surface modification such as a hydroxyapatite (HAp) coating on their surfaces has been investigated. Recently, a simple method for forming HAp layer on the surfaces of titanium and its alloys has been developed. This method is called as alkaline treatment process. In this method, HAp deposits on the surfaces of titanium and its alloys by dipping into simulated body fluid (SBF) after an alkaline solution treatment that is followed by a baking treatment (alkaline treatment). This process is applicable to newly developed beta-type Ti-29Nb-13Ta-4.6Zr alloy (TNTZ) for biomedical applications achieving bioactive HAp modification. In this study, the morphology of the HAp layer formed on the surface of TNTZ was investigated after various alkaline treatments followed by dipping in SBF. The formability of HAp on the surface of TNTZ was then discussed. The formability of HAp on TNTZ is much lower than that of commercially pure Ti, Ti-6Al-4V ELI and Ti-15Mo-5Zr-3Al alloys, which are representative metallic biomaterials. The formability of HAp on TNTZ is improved by increasing the amount of Na in the sodium titanate gels formed during an alkaline solution treatment where the NaOH concentrations and the dipping time are over 5 M and 172.8 ks, respectively. The formability of HAp on TNTZ is considerably improved by dipping in a 5 M NaOH solution for 172.8 ks. This condition for alkaline solution treatment process is the most suitable for TNTZ.

Sign in / Sign up

Export Citation Format

Share Document