scholarly journals Thermophysical Properties of Thermosoftening Nasotracheal Tubes

2018 ◽  
Vol 65 (2) ◽  
pp. 100-105
Author(s):  
Yoshihiro Takasugi ◽  
Koichi Futagawa ◽  
Takashi Umeda ◽  
Kouhei Kazuhara ◽  
Satoshi Morishita
Keyword(s):  
Body Temperature ◽  
Surface Temperature ◽  
Infrared Thermography ◽  
Polyvinyl Chloride ◽  
Thermophysical Properties ◽  
Burn Injury ◽  
Nasotracheal Intubation ◽  
Posterior Wall

Thermosoftening treatment of polyvinyl chloride (PVC) nasotracheal tubes (NTTs) can reduce the incidence and amount of epistaxis during nasotracheal intubation. The optimal thermal setting for thermosoftening treatment of NTTs without burn injury was investigated. Two composite types of PVC NTTs were used. Following withdrawal of the PVC NTTs from a bottle of water at 45 or 60°C, the changes in the surface temperature of the NTTs were measured by infrared thermography. Hardness of the NTTs at 25, 30, 35, and 40°C was measured. The incidence of epistaxis during nasotracheal intubation using thermosoftened NTTs was evaluated retrospectively. The surface temperature of both PVC NTTs dipped in 45 and 60°C water decreased to below body temperature 30 seconds after withdrawing them from the bottles. Although thermosoftening treatment proportionally decreased the hardness of both types of NTTs, the degrees differed according to their composition. When avoiding impingement of the NTT on the posterior wall of the nasopharynx, the incidence of mild and moderate epistaxis was 2.3%. Flexibility of PVC NTTs could be obtained by thermosoftening treatment at 60°C without burn injury. Thermosoftening treatment of PVC NTTs may be useful to avoid epistaxis during nasotracheal intubation.

scholarly journals Pathophysiology of Fever and Application of Infrared Thermography (IRT) in the Detection of Sick Domestic Animals: Recent Advances

Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2316
Author(s):  
Daniel Mota-Rojas ◽  
Dehua Wang ◽  
Cristiane Gonçalves Titto ◽  
Jocelyn Gómez-Prado ◽  
Verónica Carvajal-de la Fuente ◽  
...  
Keyword(s):  
Body Temperature ◽  
Infrared Thermography ◽  
Core Body Temperature ◽  
The Body ◽  
Farm Animals ◽  
Economic Losses ◽  
Febrile Response ◽  
Temperature Range ◽  
Stable Temperature ◽  
Core Body

Body-temperature elevations are multifactorial in origin and classified as hyperthermia as a rise in temperature due to alterations in the thermoregulation mechanism; the body loses the ability to control or regulate body temperature. In contrast, fever is a controlled state, since the body adjusts its stable temperature range to increase body temperature without losing the thermoregulation capacity. Fever refers to an acute phase response that confers a survival benefit on the body, raising core body temperature during infection or systemic inflammation processes to reduce the survival and proliferation of infectious pathogens by altering temperature, restriction of essential nutrients, and the activation of an immune reaction. However, once the infection resolves, the febrile response must be tightly regulated to avoid excessive tissue damage. During fever, neurological, endocrine, immunological, and metabolic changes occur that cause an increase in the stable temperature range, which allows the core body temperature to be considerably increased to stop the invasion of the offending agent and restrict the damage to the organism. There are different metabolic mechanisms of thermoregulation in the febrile response at the central and peripheral levels and cellular events. In response to cold or heat, the brain triggers thermoregulatory responses to coping with changes in body temperature, including autonomic effectors, such as thermogenesis, vasodilation, sweating, and behavioral mechanisms, that trigger flexible, goal-oriented actions, such as seeking heat or cold, nest building, and postural extension. Infrared thermography (IRT) has proven to be a reliable method for the early detection of pathologies affecting animal health and welfare that represent economic losses for farmers. However, the standardization of protocols for IRT use is still needed. Together with the complete understanding of the physiological and behavioral responses involved in the febrile process, it is possible to have timely solutions to serious problem situations. For this reason, the present review aims to analyze the new findings in pathophysiological mechanisms of the febrile process, the heat-loss mechanisms in an animal with fever, thermoregulation, the adverse effects of fever, and recent scientific findings related to different pathologies in farm animals through the use of IRT.

scholarly journals 3D Thermal Monitoring of Jointed Rock Masses through Infrared Thermography and Photogrammetry

2021 ◽  
Vol 13 (5) ◽  
pp. 957
Author(s):  
Guglielmo Grechi ◽  
Matteo Fiorucci ◽  
Gian Marco Marmoni ◽  
Salvatore Martino
Keyword(s):  
Surface Temperature ◽  
Infrared Thermography ◽  
Point Cloud ◽  
Engineering Geology ◽  
Point Clouds ◽  
Jointed Rock ◽  
Geometric Accuracy ◽  
Rock Masses ◽  
Natural Systems ◽  
Temperature Distributions

The study of strain effects in thermally-forced rock masses has gathered growing interest from engineering geology researchers in the last decade. In this framework, digital photogrammetry and infrared thermography have become two of the most exploited remote surveying techniques in engineering geology applications because they can provide useful information concerning geomechanical and thermal conditions of these complex natural systems where the mechanical role of joints cannot be neglected. In this paper, a methodology is proposed for generating point clouds of rock masses prone to failure, combining the high geometric accuracy of RGB optical images and the thermal information derived by infrared thermography surveys. Multiple 3D thermal point clouds and a high-resolution RGB point cloud were separately generated and co-registered by acquiring thermograms at different times of the day and in different seasons using commercial software for Structure from Motion and point cloud analysis. Temperature attributes of thermal point clouds were merged with the reference high-resolution optical point cloud to obtain a composite 3D model storing accurate geometric information and multitemporal surface temperature distributions. The quality of merged point clouds was evaluated by comparing temperature distributions derived by 2D thermograms and 3D thermal models, with a view to estimating their accuracy in describing surface thermal fields. Moreover, a preliminary attempt was made to test the feasibility of this approach in investigating the thermal behavior of complex natural systems such as jointed rock masses by analyzing the spatial distribution and temporal evolution of surface temperature ranges under different climatic conditions. The obtained results show that despite the low resolution of the IR sensor, the geometric accuracy and the correspondence between 2D and 3D temperature measurements are high enough to consider 3D thermal point clouds suitable to describe surface temperature distributions and adequate for monitoring purposes of jointed rock mass.

scholarly journals Rock Emissivity Measurement for Infrared Thermography Engineering Geological Applications

2021 ◽  
Vol 11 (9) ◽  
pp. 3773
Author(s):  
Simone Mineo ◽  
Giovanna Pappalardo
Keyword(s):  
Surface Temperature ◽  
Infrared Thermography ◽  
High Sensitivity ◽  
Point Of View ◽  
Rock Surface ◽  
Rock Types ◽  
Ornamental Stones ◽  
Emissivity Measurement ◽  
Laboratory Tool ◽  
Non Destructive

Infrared thermography is a growing technology in the engineering geological field both for the remote survey of rock masses and as a laboratory tool for the non-destructive characterization of intact rock. In this latter case, its utility can be found either from a qualitative point of view, highlighting thermal contrasts on the rock surface, or from a quantitative point of view, involving the study of the surface temperature variations. Since the surface temperature of an object is proportional to its emissivity, the knowledge of this last value is crucial for the correct calibration of the instrument and for the achievement of reliable thermal outcomes. Although rock emissivity can be measured according to specific procedures, there is not always the time or possibility to carry out such measurements. Therefore, referring to reliable literature values is useful. In this frame, this paper aims at providing reference emissivity values belonging to 15 rock types among sedimentary, igneous and metamorphic categories, which underwent laboratory emissivity estimation by employing a high-sensitivity thermal camera. The results show that rocks can be defined as “emitters”, with emissivity generally ranging from 0.89 to 0.99. Such variability arises from both their intrinsic properties, such as the presence of pores and the different thermal behavior of minerals, and the surface conditions, such as polishing treatments for ornamental stones. The resulting emissivity values are reported and commented on herein for each different studied lithology, thus providing not only a reference dataset for practical use, but also laying the foundation for further scientific studies, also aimed at widening the rock aspects to investigate through IRT.

Do Fentanyl and Morphine Influence Body Temperature After Severe Burn Injury?

2011 ◽  
Vol 32 (2) ◽  
pp. 309-316 ◽  
Author(s):  
Steven Alexander Kahn ◽  
Ryan J. Beers ◽  
Christopher W. Lentz
Keyword(s):  
Body Temperature ◽  
Burn Injury ◽  
Severe Burn ◽  
Severe Burn Injury

Characterization of Fouled Flat Sheet Membranes by Infrared Thermography

2014 ◽  
Author(s):  
Kennethrex O. Ndukaife ◽  
George Agbai Nnanna
Keyword(s):  
Surface Temperature ◽  
Infrared Thermography ◽  
Spectral Power ◽  
Membrane Surface ◽  
Infrared Camera ◽  
Feed Solution ◽  
Feed Concentration ◽  
Ir Camera ◽  
Measure Surface Temperature

An Infrared thermography (IRT) technique for characterization of fouling on membrane surface has been developed. The emitted spectral power from the fouled membrane is a function of emissivity and surface morphology. In this work, a FLIR A320 IR camera was used to measure surface temperature and emissivity. The surface temperature and the corresponding emissivity value of various areas on the fouled membrane surface is measured by the infrared camera and recorded alongside its thermogram. Different fouling experiments were performed using different concentrations of aluminum oxide nanoparticle mixed with deionized water as feed solution (333 ppm, 1833 ppm and 3333 ppm) so as to investigate the effect of feed concentration on the degree of fouling and thus its effect on the emissivity values measured on the membrane surfaces. Surface plots in 3D and Line plots are obtained for the measured emissivity values and thickness of the fouling deposit on the membrane surface respectively. The results indicate that the IRT technique is sensitive to changes that occur on the membrane surface due to deposition of contaminants on the membrane surface and that emissivity is a function of temperature, surface roughness and thickness of the specimen under investigation.

Sign in / Sign up

Export Citation Format

Share Document