scholarly journals The Utilization of Cocopeat as Growing Media for Paraserianthes falcataria and Intsia palembanica

2018 ◽  
Vol 6 (2) ◽  
pp. 22
Author(s):  
Dimas Ramadhan ◽  
Melya Riniarti ◽  
Trio Santoso
Keyword(s):  
Urban Development ◽  
Analysis Of Variance ◽  
Optimum Composition ◽  
Optimum Growth ◽  
Paraserianthes Falcataria ◽  
Growing Media ◽  
Potential Alternative ◽  
C 50 ◽  
Test Result ◽  
Intsia Palembanica

Rising urban development decreased the availability of topsoil for growing media. Therefore, it was necessary to study potential alternative media such as cocopeat. The objective of the study wasto know the optimum composition of cocopeat and soil for optimum growth of Paraserianthes falcataria and Intsia palembanica. The method used was a complete random design. Five treatments were applied to each seedling, included: A (100% soil), B (75% soil + 25% cocopeat), C (50% soil + 50% cocopeat), D (25% soil + 75% cocopeat) and E (100% cocopeat). Seedlings growth were analyzed using analysis of variance, followed by least significant different (LSD) test. Result showed that the 25% cocopeat compound was the most optimum composition for Intsia palembanica seedlings, while 25% and 50% of cocopeat composition was the most optimum for the Paraserianthes falcataria growth. Keyword : cocopeat, growing media, Intsia palembanica, Paraserianthes falcataria, seedling growth.

The Analysis of Composite Particle Board Based on Mushroom Growing Media Waste

2019 ◽  
Vol 966 ◽  
pp. 210-214
Author(s):  
Tjahjanti Prantasi Harmi ◽  
Sutarman ◽  
Widodo Edi ◽  
Alfian Faldy ◽  
Arif Syamsul ◽  
...  
Keyword(s):  
Composite Particle ◽  
Mechanical Test ◽  
Optimum Composition ◽  
Modulus Of Rupture ◽  
Particle Board ◽  
Thickness Swelling ◽  
Growing Media ◽  
Holding Power ◽  
The Media ◽  
Moisture Content Measurement

Mushroom growing media waste (MGMW) is the media waste after mushroom plants are harvested. In this research, we try to reuse MGMW as a material for composite particle board. The physical properties of the composite were tested using density and moisture content measurement. We also did the measurement for thickness swelling after immersion in water, the strength of absorption water, internal bonding. The mechanical test was conducted to know the modulus of elasticity, modulus of rupture and screw holding power properties. Impact and pressure was done for the optimum composition. The optimum composition, particle board is 75% MGMW + 24% polyester resin + 1% catalyst Mekpo (methyl ethyl ketone peroxides), and 60% MGMW + 39% (50% urea +50% starch) + 1% PVC glue. It is suitable for physical and mechanical test and accordance with SNI 03-2105-2006 and JIS A 5908-2003. The microstructure of MGMW was observed using Scanning Electron Microscope (SEM) shows the grain of a composite particle board is firmly integrated.

scholarly journals Growth of Dieffenbachia maculata `Camille' in Growing Media Based on Spaghnum Peat or Coconut Coir Dust

HortScience ◽  
1996 ◽  
Vol 31 (4) ◽  
pp. 583e-583
Author(s):  
Robert H. Stamps ◽  
Michael R. Evans
Keyword(s):  
Pore Space ◽  
Plant Root ◽  
Production Cycle ◽  
Greenhouse Production ◽  
Growing Media ◽  
Coir Dust ◽  
Saturated Media ◽  
Coconut Coir ◽  
C 50 ◽  
Water Holding

A comparison was made of Philippine coconut coir dust and Canadian spaghnum peat as components of three growing media for greenhouse production of Dieffenbachia maculata `Camille'. The soilless media were prepared using coir or peat in various amounts (by volume) combined with pine bark, vermiculite, and/or perlite (Media A–50% coir/peat: 25% vermiculite: 25% perlite; Media B–40% coir/peat: 30% vermiculite: 30% bark; Media C–50% coir/peat: 50% bark). Chemical and physical properties of the soils were determined at the beginning and the end of the five-month production cycle. Plant root and top growth and grades were determined at the end of the experiment. Initially, saturated media extracts from coir-containing media had elevated K, Cl, and soluble salts levels compared to peat-containing media; however, by the end of the experiment those levels were lower in coir- than in peat-based media. Water-filled pore space and water-holding capacities were generally higher and air-filled pore space lower in coir- than in peat-based media, probably due to differences in particle size distributions. There were no interaction effects on plant growth between growing media and coir versus peat. Plant root and top growth in Media A > Media B > Media C and plant top growth was greater in coir- than in peat-based media. Differences in growth could be due, in part, to differences in media water-holding capacities.

scholarly journals Minimizing Irrigation and Fertilization in Greenhouse-grown Flowering Vinca

HortScience ◽  
1997 ◽  
Vol 32 (3) ◽  
pp. 533C-533
Author(s):  
Karen L. Panter ◽  
Amy M. Briggs ◽  
Michael J. Roll ◽  
Steven E. Newman
Keyword(s):  
Catharanthus Roseus ◽  
Slow Release ◽  
Optimum Growth ◽  
Irrigation Systems ◽  
Growing Media ◽  
Waste Tires ◽  
Irrigation Methods ◽  
Growing Medium

The objective of this study was to determine which combination of three types of irrigation systems, three fertilization method, and four growing media produced optimum growth of flowering vinca, Catharanthus roseus. Irrigation systems used included ebb-and-fl ood, drip, and pulse; fertilization methods included slow release, prepackaged, and custom mixed; and the four growing media were peatmoss:perlite:vermiculite (1:1:1, by volume), peatmoss:rockwool (1:1, by volume), and 0.6-cm diameter shredded rubber or fabric from waste tires: vermiculite:peatmoss (1:1:2, by volume). Four replications of five plants each were used in each of the 36 treatment combinations. Plants were potted 29 and 30 May 1996 in 10-cm containers, grown for 10 weeks, and harvested 6 Aug. 1996. The drip-irrigated benches were irrigated once per day for 15 s. Pulse-irrigated benches were watered twice per day for 6 s. This resulted in the drip- and pulse-irrigated plants receiving a similar volume of water daily. Ebb-and-fl ood benches were filled once per day with drainage occurring 15 min after filling. Ending plant heights and dry weights indicated that those plants in the prepackaged fertilizer/drip or ebb-and-fl ood irrigation/shredded tire fiber growing medium were comparable to plants grown in the peatmoss:rockwool medium with the same fertilizer and irrigation methods.

scholarly journals TINGKAT SOLVABILITAS PERUSAHAAN ASURANSI JIWA SYARIAH DI INDONESIA

2020 ◽  
Vol 10 (3) ◽  
pp. 213-222
Author(s):  
Nur Wachidah Yulianti
Keyword(s):  
Analysis Of Variance ◽  
Life Insurance ◽  
Mean Difference ◽  
Insurance Companies ◽  
Anova Test ◽  
The Mean ◽  
One Way Anova ◽  
Test Result

This study aims to look at the mean difference of the solvability level of tabarru’ fund of sharia life insurance companies in Indonesia. The population of this research were full fledge life insurance companies from 2014 to 2019. This research was tested data through one-way analysis of variance (ANOVA) test. One way ANOVA test result shown that there is a significant mean difference between sharia life insurance companies in Indonesia at the solvability level of tabarru’ funds. Keywords: mean difference, ANOVA, life insurance, solvability

scholarly journals Effect of Salinities and Dietary Patterns toward Fullness of Gut and Gut Evacuation Time of the Newly Introduced Penaeus merguiensis Larvae

2021 ◽  
Vol 26 (2) ◽  
pp. 71-78
Author(s):  
Mostafa Imhmed Ighwerb ◽  
Johannes Hutabarat ◽  
Ervia Yudiati ◽  
Rudhi Pribadi ◽  
Widianignsih Widianingsih ◽  
...  
Keyword(s):  
Optimum Condition ◽  
Salinity Tolerance ◽  
Optimum Growth ◽  
Evacuation Time ◽  
Digestive Capacity ◽  
Live Feed ◽  
Gut Evacuation ◽  
C 50 ◽  
Larvae Culture ◽  
Penaeus Merguiensis

The gut capacity of shrimp larvae is minimal, and their digestion is often challenged by the inevitable fact that they tend to develop slowly during the zoea stage. Many studies approved that the digestive capacity of shrimp larvae could be improved by increasing the retention time of food in the intestine. Gut evacuation time and fullness of the gut are crucial parameters in assessing the growth of shrimp larvae, and the diet as well as  environmental conditions indeed influence the activity of these parameters. Although many species of shrimps have a wide salinity tolerance, more specific research on salinity and its relation to the type of diet is necessary to find the optimum condition supporting the growth of shrimp larvae. By employing Penaeus merguiensis larvae, this study evaluates the effect of three nominal salinities (28, 32, and 36 ppt) and types of diets (Diet A: 100% live feed; Diet B: 100% FRIPPAK; Diet C: a combination of Diet A and Diet C, 50 % each) toward the fullness of gut and gut evacuation time of the newly introduced Penaeus merguiensis larvae culture. The result showed that the longest gut evacuation time and the highest percentage of gut's fullness were found in all Zoea reared with Diet A at salinity 28 and 32 ppt; Zoea-1 at 28 ppt with Diet A; Zoea-2 at 32 ppt with Diet A; Zoea-3 at 32 ppt with Diet A. Longer gut evacuation time would have an impact on the higher percentage of the fullness of gut. The higher fullness of the gut also indicates that the larvae have the best capacity to produce energy and achieve optimum growth.

scholarly journals Pengaruh Sistem Hidroponik Dan Media Tanam Terhadap Pertumbuhan Dan Produksi Tanaman Kembang Kol (Brassica oleraceae)

2019 ◽  
Vol 5 (1) ◽  
pp. 22 ◽  
Author(s):  
Abdul Rofik
Keyword(s):  
Plant Height ◽  
Analysis Of Variance ◽  
Media Influence ◽  
Growing Media ◽  
Hydroponic System ◽  
A Value ◽  
Best Value ◽  
Flower Diameter ◽  
Number Of Leaves ◽  
Brassica Oleraceae

Effect of Hydroponic System and Growing Media on Growth and Production of Cauliflower (Brassica oleraceae). Results of analysis of variance showed that the influence of the hydroponic system very significant effect on plant height 8 ABP, 10 ABP. A high of 33.24 cm and 32.11 cm lows. number of leaves 8 ABP, ABP 12 with the highest value is 34.33 and the lowest 28.83. the flowering with the fastest value is 57.75 days and 76.50 days late, the diameter of the flower with the highest score is 71.32 grams and 64.05 grams lows. Hydroponic growing media influence a very significant effect on the number of leaves 4 ABP, ABP 6, and 8 weeks after planting. Significant effect on plant height 2 ABP, ABP 6, 8 ABP, ABP 12 with the highest score is 33.26 cm and the lowest was 32.42 cm, number of leaves 2 MST, MST 12 with the highest score is 34.08 and the lowest strand 29, 83 strands, the flowering with the fastest value is 75.75 days and 84.42 days late, flower diameter highest score is 71.15 mm and 61.51 mm and the weight the lowest rate that is the highest value and the lowest 43.82 53.65 grams g.interaction hydroponic system and growing media very significant effect on plant height 6 ABP with the highest value is 26.85 cm and 19.60 cm lows. Significant 2 ABP, 8 ABP, ABP 10, ABP 12 with the highest score is 33.75 cm and the lowest was 31.15 cm, number of leaves 2 ABP, ABP 4, 6 ABP, 8 ABP, ABP 10, ABP 12 with the highest score namely lows of 40.50 and 27.00, the fastest flowering with a value that is 67.00 days and 87.25 days late and a diameter of flowers with the best value and the lowest is 72.39 mm 53.35 mm.

scholarly journals Power Transformer Wire Estimate

2016 ◽  
Vol 2 (1) ◽  
pp. 59
Author(s):  
Angelo B. Dalaguit ◽  
Mary Ann L. Dalaguit
Keyword(s):  
Experimental Study ◽  
Analysis Of Variance ◽  
Power Supply ◽  
Output Voltage ◽  
Power Transformer ◽  
Iron Core ◽  
Significant Difference ◽  
And Performance ◽  
Test Result ◽  
Core Current

This experimental study determined the weight of wire used in power supply using the laboratory technique and procedure to gather data. There were two designs with three treatments each, prepared and subjected to using the Two Way Analysis of Variance. The treatments for the first design were: one is 1 1/8 inch by 1 1/8 inch area and output voltage of 6 volts; two is 1 1/8 inch by 1 1/8 inch area and output voltage of 36 volts; three is 1 1/8 inch by 1 1/8 inch area and output voltage of 110 volts. The treatments for design number two were: one is 1/2 inch by 1/2 inch area and output voltage of 12 volts; two is 3/4 inch by 3/4 inch area and output voltage of 12 volts; three is 1 inch by 1 inch area and output voltage of 12 volts. The test result of significant differences in the effectiveness, efficiency and performance of the different treatments showed no significant difference on windings, temperature, voltage, size of the iron core, current, power, number of turns, turns per volt and force applied in winding.

Item Context and /s/ Phone Articulation Test Results

1972 ◽  
Vol 15 (4) ◽  
pp. 852-860 ◽  
Author(s):  
Zoe Zehel ◽  
Ralph L. Shelton ◽  
William B. Arndt ◽  
Virginia Wright ◽  
Mary Elbert
Keyword(s):  
Test Score ◽  
Sound Production ◽  
Broad Context ◽  
Test Results ◽  
Production Task ◽  
Test Result

Fourteen children who misarticulated some phones of the /s/ phoneme were tape recorded articulating several lists of items involving /s/. The lists included the Mc-Donald Deep Test for /s/, three lists similar to McDonald’s but altered in broad context, and an /s/ sound production task. Scores from lists were correlated, compared for differences in means, or both. Item sets determined by immediate context were also compared for differences between means. All lists were found to be significantly correlated. The comparison of means indicated that both broad and immediate context were related to test result. The estimated “omega square” statistic was used to evaluate the percentage of test score variance attributable to context.

Sign in / Sign up

Export Citation Format

Share Document