scholarly journals Maintenance Management Regime for Off-Grid Solar PV Renewable Energy System in Nigeria

2020 ◽  
Vol 5 (11) ◽  
pp. 1376-1382
Author(s):  
Zacchaeus A. Adetona ◽  
Joel Ogunyemi ◽  
Irmiya Bitrus
Keyword(s):  
Renewable Energy ◽  
Energy System ◽  
Green Energy ◽  
Solar Pv ◽  
Solar Panels ◽  
Circuit Breakers ◽  
Pv Systems ◽  
Management Regime ◽  
Supply Problem ◽  
Maintenance Personnel

The perennial inadequate power supply problem in Nigeria, the worldwide call for green energy and the unavailability of grid electrical supply or difficulty in accessing it have created a need for the adoption of renewable energy such as solar PV systems. PV systems have a lifespan ranging from 10 to 25 years if well maintained but it has been observed that PV systems do not last up to their useful lifespan in Nigeria. A preliminary survey carried out showed that 71.2% of sample did not carry out any maintenance on their PV installations, 85.7% agreed that a lack of maintenance was responsible for their nonfunctional PV systems and 95% of the respondents agreed that there was a lack of maintenance on PV installations in Nigeria. A maintenance regime was developed for PV systems whereby a maintenance personnel is appointed to carry out routine or breakdown maintenance on solar panels, charge controller, battery, inverter, and cabling. The regime starts with turning off power coming from the solar panels. The maintenance of the solar panels follows; next is maintenance on all cable wiring and terminations. After all cable terminations have been checked, the battery maintenance follows. The charge controller is then checked for maintenance and subsequently, power from solar panels can be switched on to restore charging. Two protective installations were recommended in the maintenance regime namely the installation of earthing and DC circuit breakers to protect the solar system installation.

Energy Consumption Analysis of Animation-Park in Sino-Singapore Tianjin Eco-City

2013 ◽  
Vol 316-317 ◽  
pp. 176-180 ◽  
Author(s):  
Xue Jing Zheng ◽  
Meng Jun Yang ◽  
Wan Dong Zheng ◽  
Yun Kun Bu
Keyword(s):  
Renewable Energy ◽  
Energy Consumption ◽  
Water System ◽  
Energy System ◽  
Living Environment ◽  
Hot Water ◽  
Solar Pv ◽  
Pump System ◽  
Heat Pump System ◽  
Save Energy

Sino-Singapore Tianjin Eco-city is a strategic cooperation project between China and Singapore to improve the living environment and build an eco-culture. Animation-park covers an area of 1 km2, with a total construction area of 7.7x105m2. Wide sources of the renewable energy, such as solar hot water system, ground source heat pump system, solar PV power generation system, and deep geothermal energy system, is strongly recommended to use in eco-city in order to save energy and protect the environment. The usage of renewable energy is seen as a complement to the conventional energy. The energy consumption of the animation park is 42926tce of coal per year, and the renewable energy that used is 4573.6tce of coal per year. The usage of renewable energy leads to the reduction in the emission of CO2 of 18895.9t per year.

A 3D City Model as User Interface Connected to an Energy Model

2014 ◽  
pp. 228-246 ◽  
Author(s):  
Erik Kjems ◽  
Poul Alberg Østergaard
Keyword(s):  
Renewable Energy ◽  
Web Application ◽  
Energy Production ◽  
Energy System ◽  
Energy Model ◽  
Green Energy ◽  
Precise Calculation ◽  
3D City Model ◽  
City Model ◽  
The City

Back in 2007 the municipality of Frederikshavn in Northern Jutland in Denmark decided to use only 100% renewable energy for electricity, heat and transport by the year of 2015. Frederikshavn, the largest city in the municipality, was naturally chosen as case city. To be able to verify whether the green energy balance is possible to achieve, it was necessary to create energy scenarios for the whole city and also give the possibility to alter the current energy production and consumption. At the same time the city decided to involve as many people living in the city as possible, making it a project for the citizens of Frederikshavn. One result of this decision was an interactive Web application developed at Aalborg University. The application uses a 3D city model of the city of Frederikshavn as interface and gives the possibility to alter inputs for the energy consumption and energy production of the city using sliders and buttons as part of the interface. While the 3D model gives an immediate visual result, a connection to an underlying numerical energy model developed in earlier years at the University delivers a quite precise calculation on all vital data involved in the overall calculation of renewable energy within a closed energy system. This chapter describes the underlying theories and methods for creating such a system and presents the system, which can be understood as a case story among many.

Power Electronics and Controls in Solar Photovoltaic Systems

2013 ◽  
pp. 68-125
Author(s):  
Radian Belu
Keyword(s):  
Renewable Energy ◽  
Power Electronics ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Solar Thermal ◽  
System Capacity ◽  
Energy Sources ◽  
Solar Panels ◽  
Renewable Energy Systems ◽  
Pv Systems

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.

Power Electronics and Controls in Solar Photovoltaic Systems

2015 ◽  
pp. 2016-2072
Author(s):  
Radian Belu
Keyword(s):  
Renewable Energy ◽  
Power Electronics ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Solar Thermal ◽  
System Capacity ◽  
Energy Sources ◽  
Solar Panels ◽  
Renewable Energy Systems ◽  
Pv Systems

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.

scholarly journals Grey SWARA-FUCOM Weighting Method for Contractor Selection MCDM Problem: A Case Study of Floating Solar Panel Energy System Installation

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2481 ◽  
Author(s):  
Cao ◽  
Esangbedo ◽  
Bai ◽  
Esangbedo
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Cost Effective ◽  
Energy System ◽  
Solar Panel ◽  
Solar Panels ◽  
Weighting Method ◽  
Weight Analysis ◽  
Consistent Method ◽  
Grey Relational

Selection of the most appropriate contractor for the installation of solar panels is essential to maximizing the benefit of this renewable, sustainable energy source. Solar energy is one of the 100% renewable energy sources, but implementation may not be very simple and cost-effective. A key phase in the implementation of renewable energy is the evaluation of contractors for the installation of solar panels, which is addressed as a multi-criteria decision-making (MCDM) problem. A new hybrid method is proposed that combines the stepwise weight analysis ratio assessment (SWARA) and full consistent method (FUCOM) weights that are represented as grey numbers used with traditional grey relational analysis (GRA) and evaluation based on distance from average solution (EDAS) methods. The ranking of contractors by both methods is the same, which confirmed the results presented in this research. The use of the grey SWARA-FUCOM weighting method combined with the GRA and EDAS methods increased the decision-makers’ (DMs) confidence in awarding the installation of the solar panel energy system to the top-ranked contractor.

Towards a labelling for green energy production units: Case study of off-grid solar PV systems

Energy ◽  
2020 ◽  
Vol 208 ◽  
pp. 118149
Author(s):  
Yao K. Azoumah ◽  
Alain K. Tossa ◽  
Rock A. Dake
Keyword(s):  
Energy Production ◽  
Green Energy ◽  
Solar Pv ◽  
Pv Systems

scholarly journals Formulation and simulation of a hybrid solar PV-wind generation system with photovoltaic concentration for non-interconnected areas to the energy grid

2020 ◽  
Vol 181 ◽  
pp. 02002 ◽  
Author(s):  
José Luis Torres-Madroñero ◽  
Jorge Mario Tamayo-Avendaño ◽  
Santiago Bernal-del Río ◽  
Julián Sierra-Pérez ◽  
César Nieto-Londoño ◽  
...  
Keyword(s):  
Storage System ◽  
Energy System ◽  
Solar Pv ◽  
Solar Panels ◽  
Levelized Cost Of Electricity ◽  
Hybrid Renewable Energy System ◽  
Reduction Of Area ◽  
Wind Generation System ◽  
Isolated Systems ◽  
Power Curves

Different isolated systems with conventional generation sources are installed in Non-Interconnected Areas (ZNI) in Colombia while off-grid renewable systems are a trending answer for the energy supply in these regions. The complementarity between different energy sources, a storage system and adequate control can substantially improve the reliability of isolated generation systems. In this context, the sizing of a Hybrid Renewable Energy System (HRES) by means of a Genetic Algorithm (GA) is presented, considering the wind and solar resources specific to a representative rural location in Colombia. The methodology involves power curves for small wind turbines and the model for photovoltaic solar panels. The preliminary output consists of a weighted distribution for each technology, either wind or conventional photovoltaics, and is constrained by the Loss of Power Supply Probability (LPSP) and the Levelized Cost Of Electricity (LCOE). A second step consists of the optimization of the installed area for photovoltaic generation, considering a Concentrated Photovoltaic (CPV) system and aiming to maintain the initial fraction of generation for this resource. Finally, an analysis is performed on the reduction of area for solar generation to the increase in costs derived from the use of concentrators and other penalties associated with this technology.

scholarly journals Optimization and Techno-Economic Analysis of PV-Wind Power Systems for Rural Location in India.

2020 ◽  
Vol 170 ◽  
pp. 01015
Author(s):  
Avinash Kaldate ◽  
Amarsingh Kanase-Patil ◽  
Shashikant Lokhande
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Hybrid System ◽  
Energy System ◽  
Green Energy ◽  
Graphical Form ◽  
Hybrid Renewable Energy System ◽  
Optimum Planning ◽  
Wind Power Systems

One downside to Green Energy is that it cannot be estimated. Therefore, determining the optimum planning and perfect working strategies for the resources to be included in the hybrid system is very important. HOMER software has been used in this research paper to solve the case study of the hybrid renewable energy system. Due to its extensive analytical capabilities and advanced prediction capabilities based on the sensitivity of variables, HOMER is one of the most used software for optimal planning purposes. A case study for the sizing of a renewable energy-based hybrid system is solved in this article, using the Hybrid Optimization of Multiple Energy Resources (HOMER) software. Photovoltaic panels (PV panels), wind turbines (WT), batteries, converters, electric charge and grid are used in case study. The results of the simulation are presented in graphical form and tabulated for better system visualization. The design of a system to supply 6.8 KWh/d whereas the peak is 1.04 KW electric loads has been performed using HOMER software. In order to allow the user to choose the most suitable option, a comparative analysis has made, showing the pros and cons of cases. Optimum construction conditions help to lower operating costs.

scholarly journals Renewable Energy-Aware Sustainable Cellular Networks with Load Balancing and Energy-Sharing Technique

2020 ◽  
Vol 12 (22) ◽  
pp. 9340
Author(s):  
Md. Sanwar Hossain ◽  
Khondoker Ziaul Islam ◽  
Abu Jahid ◽  
Khondokar Mizanur Rahman ◽  
Sarwar Ahmed ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Load Balancing ◽  
Outage Probability ◽  
Cellular Networks ◽  
Renewable Energy Sources ◽  
Green Energy ◽  
Solar Pv ◽  
Wide Range ◽  
Energy Sharing

With the proliferation of cellular networks, the ubiquitous availability of new-generation multimedia devices, and their wide-ranging data applications, telecom network operators are increasingly deploying the number of cellular base stations (BSs) to deal with unprecedented service demand. The rapid and radical deployment of the cellular network significantly exerts energy consumption and carbon footprints to the atmosphere. The ultimate objective of this work is to develop a sustainable and environmentally-friendly cellular infrastructure through compelling utilization of the locally available renewable energy sources (RES) namely solar photovoltaic (PV), wind turbine (WT), and biomass generator (BG). This article addresses the key challenges of envisioning the hybrid solar PV/WT/BG powered macro BSs in Bangladesh considering the dynamic profile of the RES and traffic intensity in the tempo-spatial domain. The optimal system architecture and technical criteria of the proposed system are critically evaluated with the help of HOMER optimization software for both on-grid and off-grid conditions to downsize the electricity generation cost and waste outflows while ensuring the desired quality of experience (QoE) over 20 years duration. Besides, the green energy-sharing mechanism under the off-grid condition and the grid-tied condition has been critically analyzed for optimal use of green energy. Moreover, the heuristic algorithm of the load balancing technique among collocated BSs has been incorporated for elevating the throughput and energy efficiency (EE) as well. The spectral efficiency (SE), energy efficiency, and outage probability performance of the contemplated wireless network are substantially examined using Matlab based Monte–Carlo simulation under a wide range of network configurations. Simulation results reveal that the proper load balancing technique pledges zero outage probability with expected system performance whereas energy cooperation policy offers an attractive solution for developing green mobile communications employing better utilization of renewable energy under the proposed hybrid solar PV/WT/BG scheme.

Sign in / Sign up

Export Citation Format

Share Document