scholarly journals Consensus and Source Properties of Malaysian Aggregates for Superior Performing Asphalt Pavements

2008 ◽  
Vol 5 (1) ◽  
pp. 53
Author(s):  
Juraidah Ahmad ◽  
Mohd Yusof Abdul Rahman ◽  
Zainab Mohamed
Keyword(s):  
Hot Mix Asphalt ◽  
Asphalt Mixture ◽  
Research Programme ◽  
Peninsular Malaysia ◽  
Mix Design ◽  
Asphalt Pavements ◽  
Local Source ◽  
Mineral Aggregate ◽  
Aggregate Properties ◽  
Highway Research

Aggregates and binder are the two main constituents that make up hot mix asphalt (HMA). Since a wide variety of mineral aggregate is used to produce Hot Mix Asphalt (HMA), proper evaluation of the mineral aggregate properties is important to ensure good performance of asphalt mixture. Unlike Superpave system, Marshall and Hveem method do not incorporate aggregate criteria into their procedures. The Superpave Highway Research Programme (SHRP) modified the Delphi process to include aggregate properties which are divided into two categories; consensus and source. The consensus properties include aggregate angularity, flat and elongated particles and sand equivalent to ensure aggregate quality is sufficient to provide satisfactory HMA performance for all design traffic levels. The source properties are often used to qualify local source of aggregate which include abrasion, deleterious materials and soundness test. In this study, granite aggregates were collected from northern, central and southern region of Peninsular Malaysia. Results of the aggregate testing showed that Malaysian aggregates are durable and of good quality. These aggregates conformed to the criteria as required in the Superpave system, hence suitable for use in the mix design.

Performance-based mix design of unmodified and lime-modified hot mix asphalt

2012 ◽  
Vol 39 (7) ◽  
pp. 824-833 ◽  
Author(s):  
Sangyum Lee ◽  
Cheolmin Baek ◽  
Je-Jin Park
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Mix Design ◽  
Direct Tension ◽  
Element Analysis ◽  
Asphalt Content ◽  
National Cooperative

This paper presents the performance evaluation of unmodified and lime-modified hot mix asphalt (HMA) mixtures at varying asphalt content using asphalt mixture performance test developed from National Cooperative Highway Research Program project 9-19 and 9-29 and the viscoelastic continuum damage finite element analysis. Test methods adopted in this study are the dynamic modulus test for stiffness, the triaxial repeated load permanent deformation test for rutting, and the direct tension test for fatigue cracking. The findings from this study support conventional understanding of the effects of asphalt content and lime modification on the fatigue cracking and rutting performance. Finally, the optimum asphalt content for both lime-modified and unmodified mixtures are proposed based on the knowledge gleaned from the performance-based mix design methodology. With additional validation and calibration, the comprehensive methodology described in this paper may serve as the foundation for a performance-based HMA mix design and performance-related HMA specifications.

Minimum Voids in Mineral Aggregate in Hot-Mix Asphalt Based on Gradation and Volumetric Properties

1996 ◽  
Vol 1545 (1) ◽  
pp. 75-79 ◽  
Author(s):  
John A. Hinrichsen ◽  
John Heggen
Keyword(s):  
Hot Mix Asphalt ◽  
Heavy Traffic ◽  
Field Application ◽  
Mix Design ◽  
Volumetric Properties ◽  
Aggregate Gradation ◽  
Mineral Aggregate ◽  
Traffic Loads ◽  
Recent Developments ◽  
Asphalt Mix

The use of voids in mineral aggregate (VMA) criteria for proper mix design of hot-mix asphalt is a time-honored and fairly successful tool. Recent developments in the field of asphalt mix design have encouraged the use of mixtures with a coarse aggregate structure to resist the effect of heavy traffic loads. By using the equations presented, which account for both aggregate gradation and the volumetric properties of the materials, the mix designer is able to judge the proper VMA requirement for each unique blend of materials. By applying the new equations, the most economical mix may be selected without great risk of reduced durability. Supporting data from field application are presented to illustrate the use of the equations.

scholarly journals Evaluation of Optimum Content of Rice Husk Ash to Improve the Hot Asphalt Concrete Performance

2018 ◽  
Vol 7 (4.20) ◽  
pp. 338
Author(s):  
Gholamali Shafabakhsh ◽  
Hassan Divandari ◽  
Seyed Reza Sajadi
Keyword(s):  
Rice Husk ◽  
Hot Mix Asphalt ◽  
Rice Husk Ash ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Pavements ◽  
Waste Products ◽  
Stone Materials ◽  
Dynamic Creep ◽  
Powder Content

Durability of asphalt pavements is related to choosing proper materials. Fillers as the smallest particles of stone materials, and one of the most important parts of asphalt mixtures, exert pivotal effects on the performance of asphalt mixtures, by filling empty spaces and because of their softness, surface features and chemical compounds. Rice husk ash is one of the waste products of burning rice husk in powerhouses that is accounted as biomass. Recently, a good many of investigations have shown that rice husk ash, as a high quality pozzolan, can be properly replaced of common aggregates. In this study rice husk ash was used as filler in hot mix asphalt, and the result mixtures’ mechanical properties was compared with ordinary mixtures whose filler was stone powder. Asphalt mixture samples with two different aggregate graded, and 0, 25, 50, 75 and 100 percent of rice husk ash which were the substitution of stone powder content, were made and the effects of using rice husk ash on the moisture sensitivity, resilience modulus, rutting and dynamic creep of asphalt mixtures were investigated. The results demonstrated that increase of using rice husk ash as the replacement of prevalent fillers in hot mix asphalts, noticeably improves their performance; however, because of excessive stiffness created by rice husk ash, it's better to use it in optimized percentage. Accordingly, statistical analysis of the tests’ results leads to presenting an optimized model for the content of Rice Husk Ash to be used in hot mix asphalt. Finally, Rice Husk Ash content were suggested 26% for graded number 4 and 48% for graded number 5 as replacements for stone powder filler. 

scholarly journals Laboratory Investigation of Compaction Characteristics of Plant Recycled Hot-Mix Asphalt Mixture

2021 ◽  
Vol 13 (6) ◽  
pp. 3005
Author(s):  
Jiangang Yang ◽  
Chen Sun ◽  
Wenjie Tao ◽  
Jie Gao ◽  
Bocheng Huang ◽  
...  
Keyword(s):  
Regression Model ◽  
Hot Mix Asphalt ◽  
Orthogonal Experiment ◽  
Asphalt Mixture ◽  
Material Design ◽  
Void Content ◽  
Range Analysis ◽  
Aggregate Gradation ◽  
Compaction Characteristics ◽  
Compaction Energy

In this study, the compaction characteristics of recycled hot-mix asphalt (RHMA) were evaluated using the void content (VV), compaction energy index (CEI), slope of accumulated compaction energy (K), and lock point (LP). Then, the effects of the compaction parameters, including the gradation of the RHMA, reclaimed asphalt pavement (RAP) content, temperature of gyrations, and number of gyrations, on the compaction characteristics of RHMA were investigated. An orthogonal experiment was designed and the data collected were analyzed via range analysis; then, a regression model was generated relying on a quadratic polynomial. Furthermore, the regression model was used for the comparison and prediction of the mixture’s compactability during the material design. Finally, the compaction mechanism of RHMA was discussed from the perspective of the void content of RAP particles. The results showed that a finer aggregate gradation, a higher gyration temperature, a greater number of gyrations, and a higher RAP content were effective for increasing the compactability of RHMA. The range analysis results suggest that the gradation of RHMA has the greatest influence on compactability, followed by the RAP content. The RAP aggregate cannot diffuse to a new mixture completely, so the remained RAP particle reduces the void content of RHMA. Therefore, a higher RAP content up to 50% can help RHMA to achieve the designed void content with higher efficiency.

Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements

2011 ◽  
Vol 415-417 ◽  
pp. 1531-1536
Author(s):  
Fu Ming Liu ◽  
Duan Yi Wang
Keyword(s):  
Tensile Strain ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Asphalt Pavements ◽  
Moisture Susceptibility ◽  
Scale Test ◽  
And Performance ◽  
Wheel Tracking ◽  
Fatigue Endurance

This paper presents the results of laboratory and performance tests for an asphalt treated base (ATB) and mixes developed in this study for perpetual asphalt pavements. Laboratory tests for the mixes included moisture susceptibility, wheel tracking and fatigue tests. The results of performance test indicated that the resistances of the high content binder ATB against moisture and fatigue damage were better than those of the lower one. It was also found from the full scale test sections that the tensile strain values at the bottom of the asphalt layer for the ATB sections were low when the asphalt layer thicknesses of the ATB sections were not thicker than those of the conventional sections. All the tensile strain values measured from the ATB sections were within the fatigue endurance limit of 70 microstrain which is the fatigue criterion of a perpetual asphalt pavement.

scholarly journals Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course

2021 ◽  
Vol 16 (2) ◽  
pp. 48-65
Author(s):  
Audrius Vaitkus ◽  
Judita Gražulytė ◽  
Andrius Baltrušaitis ◽  
Jurgita Židanavičiūtė ◽  
Donatas Čygas
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Pavements ◽  
Recycled Asphalt ◽  
Binding Agents ◽  
Pavement Structure ◽  
Pavement Structures ◽  
Base Course ◽  
Surface Distress ◽  
Foamed Bitumen

Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and transportation of reclaimed asphalt pavement. Multiple researches on the performance of cold recycled mixtures have been done; however, it is unclear how the entire pavement structure (cold recycled asphalt pavement overlaid with asphalt mixture) performs depending on binding agents. The main objective of this research was to evaluate the performance of cold in-place recycled asphalt pavements considering binding agents (foamed bitumen in combination with cement or only cement) and figure out which binder leads to the best pavement performance. Three road sections rehabilitated in 2000, 2003, and 2005 were analysed. The performance of the entire pavement structure was evaluated in terms of the International Roughness Index, rut depth, and pavement surface distress in 2013 and 2017.

Sign in / Sign up

Export Citation Format

Share Document