scholarly journals Should drill or shouldn’t drill? Urban and rural dwellers’ acceptance of geothermal power plant in Mount Slamet protection forest, Indonesia

2021 ◽  
pp. 575-590
Author(s):  
Dhifa Qorizki ◽  
Dwiko B. Permadi ◽  
Teguh Yuwono ◽  
Rohman Rohman
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Social Acceptance ◽  
Public Awareness ◽  
Environmentally Friendly ◽  
Mitigation Measures ◽  
Geothermal Power Plant ◽  
Protection Forest ◽  
The Social ◽  
Geothermal Power

Geothermal is one of the new renewable energy, which is more environmentally friendly than the existing fossil energy and has great potential to become an alternative source of energy in the future. However, the level of social acceptance of geothermal power plants operating in forest areas has not been widely studied. This study aims to reveal the social acceptance of affected residents toward the exploration of Baturaden geothermal power plant, operating in the protection forest area of ​​Mount Slamet. The survey was conducted online  to indirectly affected residents living mostly in Banyumas urban areas, while the offline face-to-face survey was administered to the directly affected residents in Sambirata and Karang Tengah villages. A total of 286 samples were analyzed. It was found that the majority of respondents preferred not to continue the establishment of the geothermal power plant, but both rural and urban dwellers have distinctive responses and reasonings. The rural tended to have stronger rejection compared to the urban residents. The acceptance of the project in both groups combined was motivated mainly by the prospect of electricity from more environmentally friendly energy sources and compliance to government policy. Those who refused tend to see from the negative impacts on the disruptions of the daily livelihood in rural areas and environmental damages. Three attitude factors significantly affect the continuation of drilling operation of GPP, namely: economic prospects of geothermal utilization in protection forests, technological optimism to migate the engative impacts, and perceived environmental concerns. To increase the social acceptance, it is suggested that policy makers and energy industry players should integrate the mitigation measures by using more proper technology within the project budget and act harmoniously to increase public awareness of the use of renewable and cleaner energy as well as pay attention to the health, welfare and culture of the local community

Performance Analysis and Optimization of Double-Flash Geothermal Power Plants

2006 ◽  
Vol 129 (2) ◽  
pp. 125-133 ◽  
Author(s):  
Ahmet Dagdas
Keyword(s):  
Power Plant ◽  
Performance Analysis ◽  
Electricity Generation ◽  
Power Plants ◽  
Second Law ◽  
Western Turkey ◽  
Geothermal Power Plant ◽  
Base Points ◽  
Geothermal Power ◽  
Double Flash

One of the most important cycles for electricity generation from geothermal energy is the double-flash cycle. Approximately 25% of the total geothermal based electricity generation all over the world comes from double-flash geothermal power plants. In this paper, performance analysis of a hypothetical double-flash geothermal power plant is performed and variations of fundamental characteristics of the plant are examined. In the performance analysis, initially, optimum flashing pressures are determined, and energy and exergy values of the base points of the plant are calculated. In addition, first and second law efficiencies of the power plant are calculated. Main exergy destruction locations are determined and these losses are illustrated in an exergy flow diagram. For these purposes, it is assumed that a hypothetical double-flash geothermal power plant is constructed in the conditions of western Turkey. The geothermal field where the power plant will be built produces geofluid at a temperature of 210°C and a mass flow rate of 200kg∕s. According to simulation results, it is possible to produce 11,488kWe electrical power output in this field. Optimum first and second flashing pressures are determined to be 530kPa and 95kPa, respectively. Based on the exergy of the geothermal fluid at reservoir, overall first and second law efficiencies of the power plant are also calculated to be 6.88% and 28.55%, respectively.

Feasibility, Design and authorization of a zero-emission Geothermal Power Plant in Italy; Case Study: “Montenero” Project

2020 ◽  
Author(s):  
Paolo Basile ◽  
Roberto Brogi ◽  
Favaro Lorenzo ◽  
Tiziana Mazzoni
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Geothermal Field ◽  
Geothermal Reservoir ◽  
Gas Content ◽  
Geothermal Resources ◽  
Geothermal Fluid ◽  
Geothermal Power Plant ◽  
Green Power ◽  
Geothermal Power

<p><span><span>Social consensus is a </span><span>condition precedent for any intervention having an impact on the territory, such as geothermal power plants. Therefore, private investors studied and proposed innovative solution for the exploitation of the medium enthalpy geothermal resource, with “zero emissions” in atmosphere, with the target of minimizing its environmental impact. “Montenero” project, developed by GESTO Italia, complies with this precondition.</span></span></p><p><span><span>The area covered b</span><span>y the exploration and exploitation permit is located on the northern edge of the great geothermal anomaly of Mt. Amiata (Tuscany), about 10 km north of the geothermal field of Bagnore, included in the homonymous Concession of Enel Green Power.</span></span></p><p><span><span>The geological - structural setting of the area around the inactive volc</span><span>ano of Mt. Amiata has been characterized by researches for the geothermal field of Bagnore, carried out by Enel Green Power over the years. The geothermal reservoir is present in the limestone and evaporitic rocks of the “Falda Toscana”, below which stands the Metamorphic Basement, as testified by the wells of geothermal field of Bagnore. The foreseen reservoir temperature at the target depth of 1.800 m is 140 °C, with an incondensable gas content of 1,8% by weight.</span></span></p><p><span><span>The project was presented to the authorities in 2013 and it is </span><span>now undergoing exploitation authorization and features the construction of a 5 MW ORC (Organic Ranking Circle) binary power plant. The plant is fed by three production wells for a total mass flow rate of 700 t/h. The geothermal fluid is pumped by three ESPs (Electrical Submersible Pump) keeping the geothermal fluid in liquid state from the extraction through the heat exchangers to its final reinjection three wells.</span></span></p><p><span><span>The reinjection temperature is 70 °C and the circuit pressure is maintained above the </span><span>incondensable gas bubble pressure, i.e. 40 bar, condition which prevents also the formation of calcium carbonate scaling. The confinement of the geothermal fluid in a “closed loop system” is an important advantage from the environmental point of view: possible pollutants presented inside the geothermal fluid are not released into the environment and are directly reinjected in geothermal reservoir.</span></span></p><p><span><span>The </span><span>environmental authorization procedure (obtained) has taken into account all the environmental aspects concerning the natural matrices (air, water, ground, ...) potentially affected by the activities needed for the development, construction and operation of “Montenero” ORC geothermal power plant. A numerical modeling was designed and applied in order to estimate the effect of the cultivation activity and to assess the reinjection overpressure (seismic effect evaluation). The project also follows the “best practices” implemented in Italy by the “Guidelines for the usage of medium and high enthalpy geothermal resources” prepared in cooperation between the Ministry of Economic Development and the Ministry of the Environment.</span></span></p>

Performance Enhancement of Single Flash Geothermal Power Plants

2005 ◽  
Author(s):  
S. Barsin ◽  
K. Aung
Keyword(s):  
Power Plant ◽  
Power Output ◽  
Capital Investment ◽  
Power Plants ◽  
Performance Enhancement ◽  
Operating Pressure ◽  
Geothermal Power Plant ◽  
Single Flash ◽  
Geothermal Power ◽  
Temperature Liquid

The present work investigates thermodynamic optimum conditions with respect to resource utilization by varying the operating pressure of flash drum for an existing geothermal power plant. The main focus of the study is to maximize the power output by minimizing the waste of liquid geothermal fluid re-injected to the well. For this purpose a double-flash system has been incorporated and the effect of operating at optimum flash pressures for both primary and secondary flash units is studied. An economic model is developed that calculates the total capital investment based on the cost of major equipments including pumps, flash drums, turbine generators, and condensers. From the results obtained it can be concluded that the plant at Svartsengi currently is working close to the optimum flashing pressure for the single-flash geothermal power plant. Providing an additional flash unit to convert the high temperature liquid coming from primary flash for Svartsengi and Nevada power plants increases the net power output by 12.7% and 28.9% respectively.

scholarly journals A STUDY OF FIELD GEOTHERMAL POWER POTENTIAL & THERMODYNAMIC CONCEPTS OF PROSPECTIVE BINARY POWER CYCLE BASED GEOTHERMAL POWER PLANT FOR TATAPANI GEOTHERMAL FIELD.

2020 ◽  
Vol 9 (12) ◽  
pp. 90-104
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Exergy Analysis ◽  
Geothermal Field ◽  
Flow Diagram ◽  
Exergy Destruction ◽  
Geothermal Power Plant ◽  
Power Cycle ◽  
Geothermal Fields ◽  
Geothermal Power

Tatapani Geothermal field is one of the most promising low-enthalpy geothermal fields in central India, located on Son-Narmada lineament in the state of Chhattisgarh, India. The Tatapani geothermal field geological, geo-chemical & reservoir data has been compiled and analysed for evaluating true power potential & better understanding of the field. The low enthalpy geothermal reservoirs can be utilized for power production using Organic Rankine Cycle (ORC) or binary power cycle. Based on previous research works done, the Tatapani geothermal field has been found to be very prospective and has got huge potential for power generation. The binary power cycle has been studied in detail along with thermodynamic concepts. In addition, similar low enthalpy geothermal power plants (conceptual & existing both) have been thoroughly studied in order to understand the concepts and methodology to perform technical feasibility based on thermodynamic and exergy analysis. The literature review covers the previous works done on Tatapani geothermal field including works on other geothermal fields in India along with previous research works for Thermodynamic & Exergy Analysis carried-out for binary geothermal power plants across the world for similar low enthalpy prospects. The methods of performing thermodynamic and exergy analysis for a potential geothermal power plant has been studied and compared. Exergy analysis highlights the areas of primary exergy destruction at various plant components and can be illustrated in the form of exergy flow diagram. The loss of exergy indicates the potential reasons for the inefficiencies within a process and exergic efficiency as conversion of input heat energy from the brine in to useful work output. The exergic efficiencies can be calculated for each component along with exergy destruction. The detailed study has been conducted in order to gather the knowledge regarding conducting the feasibility of setting up binary geothermal power plant at Tatapani from technical point of view using thermodynamic concepts.

Case Study of the Puna Geothermal Power Plant and Proposed Retrofit H2S Gas Mitigation Strategies

2020 ◽  
Author(s):  
Kevin R. Anderson ◽  
Wael Yassine
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
State Of The Art ◽  
Mitigation Strategies ◽  
Geothermal Power Plant ◽  
Current State ◽  
Abatement Strategies ◽  
Simulation Results ◽  
Geothermal Power

Abstract This paper presents modeling of the Puna Geothermal Venture as a case study in understanding how the technology of geothermal can by successfully implemented. The paper presents a review of the Puna Geothermal Venture specifications, followed by simulation results carried out using NREL SAM and RETSCREEN analysis tools in order to quantify the pertinent metrics associated with the geothermal powerplant by retrofitting its current capacity of 30 MW to 60 MW. The paper closes with a review of current state-of-the art H2S abatement strategies for geothermal power plants, and presents an outline of how these technologies can be implemented at the Puna Geothermal Venture.

Specified Maintenance of Steam Turbines in Geothermal Power Plants

2013 ◽  
Author(s):  
Almar Gunnarsson ◽  
Ari Elisson ◽  
Magnus Jonsson ◽  
Runar Unnthorsson
Keyword(s):  
Power Plant ◽  
Condition Monitoring ◽  
Power Plants ◽  
Maintenance Management ◽  
Working Fluid ◽  
Steam Turbines ◽  
Effect Analysis ◽  
Geothermal Power Plant ◽  
Management Procedures ◽  
Geothermal Power

In a geothermal power plant the working fluid used to produce electricity is often wet steam composed of corrosives chemicals. In this situation, more frequent maintenance of the equipment is required. By constructing an overview for maintenance in geothermal power plants and how it can be done with minimum power outages and cost, the geothermal energy can be made more competitive in comparison to other energy resources. This work is constructed as a part of a project, which has the aim of mapping the maintenance management system at the Hellisheiði geothermal power plant in Iceland. The object of the project is to establish Reliability Centered Maintenance (RCM) program for Hellisheiði power plant that can be utilized to establish efficient maintenance management procedures. The focus of this paper is to examine the steam turbines, which have been defined as one of the main subsystems of the power plant at Hellisheiði. A close look will be taken at the maintenance needed for the steam turbines by studying for example which parts break down and how frequently they fail. The local ability of the staff to repair or construct turbine parts on-site is explored. The paper explores how the maintenance and condition monitoring is carried out today and what can be improved in order to reduce cost. The data collected is analyzed using Failure Mode and Effect Analysis (FMEA) in order to get an overview of the system and to help organizing maintenance and condition monitoring of the power plant in the future. Furthermore, the paper presents an overview of currently employed maintenance methods at Hellisheiði power plant, the domestic ability for maintaining and repairing steam turbines and the power plant’s need for repairs. The results show that the need for maintenance of the geothermal steam turbines at Hellisheiði power plant is high and that on-site maintenance and repairs can decrease the cost.

scholarly journals Energy and exergy analysis of dry-steam geothermal power plant: Case study in kamojang geothermal power plant unit 2

2018 ◽  
Vol 197 ◽  
pp. 08018
Author(s):  
Nova Dany Setyawan ◽  
Nugroho Agung Pambudi ◽  
Frandhoni Utomo ◽  
Herman Saputro ◽  
Reza Adiprana ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Plant ◽  
Power Plants ◽  
Exergy Analysis ◽  
Research Unit ◽  
Geothermal Power Plant ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis ◽  
Geothermal Power ◽  
The Government

The Government of Indonesia is committed to realize a policy of 35,000 Megawatt (MW) of an additional supply of electricity within 5 years (2014-2019). The projection of this capacity is largely supported by fossil fuel power plants and a small portion of renewable energy. One of the renewable energy which currently has great potential in Indonesia is the geothermal. Therefore, improving the capacity of geothermal is needed to support the policy. The Kamojang is one of the largest geothermal power plant in Indonesia with an installed capacity of 235 MW from 5 generating units. The purposes of this research is to calculate the energy and exergy analysis at Kamojang geothermal power plant. To improve the capacity, exergy analysis can be used by employing the thermodynamic method. In this research, unit 2 of Kamojang's plant is employed. The analysis was examined by using the Engineering Equation Solver (EES) code. The results show the first law of efficiency was calculated at 19.03% and the second law of efficiency at 40.31%.

scholarly journals Key Elements of Environmental Justice in the Geothermal Power Plant Resistance Movement

2019 ◽  
Vol 5 (1) ◽  
pp. 65
Author(s):  
Priyo Fajar Santoso ◽  
Bevaola Kusumasari
Keyword(s):  
Power Plant ◽  
Environmental Justice ◽  
Geothermal Energy ◽  
Environmentally Friendly ◽  
Host Community ◽  
Primary Data ◽  
Geothermal Power Plant ◽  
Active Involvement ◽  
Geothermal Power ◽  
Resistance Movement

Geothermal energy is currently considered an environmentally friendly, renewable energy source. However, based on empirical data from various countries, geothermal energy production often results socio-ecological losses for the host community. Various environmental justice movements have emerged to protect environment by protesting and providing a counter discourse against the dominant perception that geothermal energy is renewable and environmentally friendly. This article aimed to understand how the strategy and discourse of the Aliansi Selamatkan Slamet (freely translated into Save Slamet Alliance) movement in rejecting the construction of the Baturraden Geothermal Power Plant (PLTPB) in Banyumas by outlining the key elements and specific conditions observed. Aliansi Selamatkan Slamet is intriguing because it has achieved active involvement of various elements through its respective perspectives to jointly reject the construction of the PLTPB. Using a theoretical framework of the movement strategy, we examined how Aliansi Selamatkan Slamet determined the selection of targets, framing, time, and relations in the resistance movement. The method was a qualitative approach: a review of primary data in the form of interviews and written documents. The results indicate sociopolitical conditions, relations between organizations, and organizational cultures also influence the strategies and discourses that the Aliansi Selamatkan Slamet movement created.

Comparative technical and economic study of Hybrid Solar-Geothermal Power Plant in Ethiopia

2021 ◽  
Vol 13 (4) ◽  
pp. 296-303
Author(s):  
B. D. Gemechu ◽  
M. E. Orlov
Keyword(s):  
Power Plant ◽  
Power System ◽  
Figure Of Merit ◽  
Power Plants ◽  
Net Present Value ◽  
Economic Assessment ◽  
Geothermal Power Plant ◽  
Hybrid Power ◽  
Hybrid Power Plant ◽  
Geothermal Power

This paper presents a techno-economic assessment of a hybrid solar-geothermal power plant that is modelled taking into account the available geothermal and solar energy resources at the Tendaho-1 (Dubti) geothermal field in Ethiopia. The hybrid power plant combines a single-flash geothermal power plant with a parabolic trough solar thermal plant to increase the energy level of geothermal steam. The geothermal fluid from one of the production wells at the geothermal site and the direct normal solar irradiance prevailing in the area offer the primary sources of energy used in the modelling. A thermodynamic analysis based on the principles of mass and energy conservation and a figure of merit analysis that allows evaluating the energy and economic performance of the hybrid power plant were performed. The technical and economic efficiency assessment was performed by comparing the performances of the hybrid power plant with a power system consisting of stand-alone geothermal and solar power plants. Results of the techno-economic assessment showed that for the same amount of energy inputs, depending on the available thermal energy storage capacity, a hybrid power plant generates up to 10.4% more electricity than a power system of two stand-alone power plants while generating a higher net present value at a lower cost of generation. In addition, the hybrid power plants with and without thermal storage system exhibit an economic figure of merit values of 2.62 and 3.42, i.e. the cost of solar resource per kWh of electricity in the hybrid energy system is reduced by 70.5% and 61.5%, respectively.

Sign in / Sign up

Export Citation Format

Share Document