Confirming the Signal Integrity in Transmission of Digital Signals on Microstrip Straight Circuits via the Eye Diagrams

2014 ◽  
Vol 5 (1) ◽  
pp. 737-741
Author(s):  
Alejandro Dueñas Jiménez ◽  
Francisco Jiménez Hernández
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Board ◽  
Signal Integrity ◽  
High Volume ◽  
Information Storage ◽  
Circuit Board ◽  
Electromagnetic Simulation ◽  
Electronic Systems ◽  
Digital Signals ◽  
Printed Circuit

Because of the high volume of processing, transmission, and information storage, electronic systems presently requires faster clock speeds tosynchronizethe integrated circuits. Presently the “speeds” on the connections of a printed circuit board (PCB) are in the order of the GHz. At these frequencies the behavior of the interconnects are more like that of a transmission line, and hence distortion, delay, and phase shift- effects caused by phenomena like cross talk, ringing and over shot are present and may be undesirable for the performance of a circuit or system.Some of these phrases were extracted from the chapter eight of book “2-D Electromagnetic Simulation of Passive Microstrip Circuits” from the corresponding author of this paper.

scholarly journals Estimating Recycling Return of Integrated Circuits Using Computer Vision on Printed Circuit Boards

2021 ◽  
Vol 11 (6) ◽  
pp. 2808
Author(s):  
Leandro H. de S. Silva ◽  
Agostinho A. F. Júnior ◽  
George O. A. Azevedo ◽  
Sergio C. Oliveira ◽  
Bruno J. T. Fernandes
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Boards ◽  
Printed Circuit Board ◽  
Electronic Waste ◽  
Decision Criterion ◽  
Economic Feasibility ◽  
Electronic Equipment ◽  
Circuit Board ◽  
Mechanical Recycling ◽  
Printed Circuit

The technological growth of the last decades has brought many improvements in daily life, but also concerns on how to deal with electronic waste. Electrical and electronic equipment waste is the fastest-growing rate in the industrialized world. One of the elements of electronic equipment is the printed circuit board (PCB) and almost every electronic equipment has a PCB inside it. While waste PCB (WPCB) recycling may result in the recovery of potentially precious materials and the reuse of some components, it is a challenging task because its composition diversity requires a cautious pre-processing stage to achieve optimal recycling outcomes. Our research focused on proposing a method to evaluate the economic feasibility of recycling integrated circuits (ICs) from WPCB. The proposed method can help decide whether to dismantle a separate WPCB before the physical or mechanical recycling process and consists of estimating the IC area from a WPCB, calculating the IC’s weight using surface density, and estimating how much metal can be recovered by recycling those ICs. To estimate the IC area in a WPCB, we used a state-of-the-art object detection deep learning model (YOLO) and the PCB DSLR image dataset to detect the WPCB’s ICs. Regarding IC detection, the best result was obtained with the partitioned analysis of each image through a sliding window, thus creating new images of smaller dimensions, reaching 86.77% mAP. As a final result, we estimate that the Deep PCB Dataset has a total of 1079.18 g of ICs, from which it would be possible to recover at least 909.94 g of metals and silicon elements from all WPCBs’ ICs. Since there is a high variability in the compositions of WPCBs, it is possible to calculate the gross income for each WPCB and use it as a decision criterion for the type of pre-processing.

scholarly journals A Study on the Radiated Susceptibility of Printed Circuit Boards and the Effects of Via Fencing

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 539
Author(s):  
Ryan P. Tortorich ◽  
William Morell ◽  
Elizabeth Reiner ◽  
William Bouillon ◽  
Jin-Woo Choi
Keyword(s):  
Printed Circuit Boards ◽  
Printed Circuit Board ◽  
Ground Plane ◽  
Circuit Board ◽  
Electronic Systems ◽  
Coupling Mechanism ◽  
Electromagnetic Modeling ◽  
Printed Circuit ◽  
Edge Radiation ◽  
Area Of Concern

Because modern electronic systems are likely to be exposed to high intensity radiated fields (HIRF) environments, there is growing interest in understanding how electronic systems are affected by such environments. Backdoor coupling in particular is an area of concern for all electronics, but there is limited understanding about the mechanisms behind backdoor coupling. In this work, we present a study on printed circuit board (PCB) backdoor coupling and the effects of via fencing. Existing work focuses on ideal stackups and indicates that edge radiation is significantly reduced by via fencing. In this study, both full wave electromagnetic modeling and experimental verification are used to investigate both ideal and practical PCB stackups. In the ideal scenario, we find that via fencing substantially reduces coupling, which is consistent with prior work on emissions. In the practical scenario, we incorporate component footprints and traces which naturally introduce openings in the top ground plane. Both simulation and experimental data indicate that via fencing in the practical scenario does not substantially mitigate coupling, suggesting that PCB edge coupling is not the dominant coupling mechanism, even at varying angles of incidence and polarization.

A Novel Discrete Passives Integration on Organic Substrate

2005 ◽  
Author(s):  
Vasudivan Sunappan ◽  
Chee Wai Lu ◽  
Lai Lai Wai ◽  
Wei Fan ◽  
Boon Keng Lok
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Board ◽  
Organic Substrate ◽  
Temperature Cycling ◽  
Circuit Board ◽  
Electrical Performance ◽  
Core Material ◽  
Bottom Surface ◽  
Passive Components ◽  
Printed Circuit

A novel process has been developed to embed discrete (surface mountable) passive components like capacitors, resistors and inductors using printed circuit board fabrication technology. The process comprises of mounting passive components on top surface of a core PCB (printed circuit board) material using surface mount technology. The passive components mounting were designed in multiple clusters within the PCB. Dielectric sheets are sandwiched between top surface of core PCB and second PCB material for lamination process. A direct interconnection of the passive components to one or more integrated circuits (IC) is further accomplished by mounting the ICs on the bottom surface of the core material in an area directly under the passive components. The close proximity of the embedded passive components such as capacitors to an IC improved electrical performance by providing impedance reduction and resonance suppression at high frequency range. The reliability of solder joints was evaluatedd by temperature cycling test.

A Design of Printed Inverted-F Antenna for RFID Tag at 5.8 GHz

2013 ◽  
Vol 427-429 ◽  
pp. 1293-1296
Author(s):  
Yan Zhong Yu ◽  
Ji Zhen Ni ◽  
Xian Hui Li
Keyword(s):  
High Frequency ◽  
Printed Circuit Board ◽  
Ground Plane ◽  
Simulation Software ◽  
Circuit Board ◽  
Electromagnetic Simulation ◽  
Antenna Structure ◽  
Rfid Tag ◽  
Printed Circuit ◽  
Substrate Layer

A printed inverted-F antenna for RFID tag at 5.8 GHz is designed in this paper. The antenna structure consists of an inverted-F patch, a substrate layer, and a ground plane. To reduce costs, the FR4 is selected as the material of substrate layer, which is used commonly in PCB (Printed Circuit Board). Its relative permittivity is 4.4 and a loss tangent is 0.02. The inverted-F patch and ground plane are laid on/under the substrate layer respectively. The designed antenna is modeled, simulated and optimized by using HFSS (high frequency electromagnetic simulation software). Simulation results demonstrate that the printed inverted-F antenna can satisfy the requirements of RFID Tag applications.

scholarly journals Optical inspection of mounted printed circuit board using National Instruments software

2020 ◽  
Vol 7 (1.) ◽  
Author(s):  
Gyula Korsoveczki
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Board ◽  
Circuit Board ◽  
Microsoft Excel ◽  
Printed Circuit ◽  
Vision Development ◽  
Optical Inspection ◽  
The Given

The topic of the given task based on the optical opposition of a mounted printed circuit board using National Instruments software. During the inspection, 7 types of resistors, 3 types of integrated circuits, barcodes and text were detected. The results of the detection have been visualized and a Microsoft Excel scan report has been exported. The optical inspection was carried out using the National Instruments Vision Development Module and LabVIEW development environments.

Sign in / Sign up

Export Citation Format

Share Document