scholarly journals Effect of Manure and Foliar Application of Growth Regulators on Lentil (Lens Culinaris) Performance in Semi-Arid Highland Environment

2015 ◽  
Vol 20 (2) ◽  
pp. 99-108 ◽  
Author(s):  
Mohsen Janmohammadi ◽  
Yousef Nasiri ◽  
Hamed Zandi ◽  
Mohsen Kor-Abdali ◽  
Naser Sabaghnia

Abstract Semi-arid environments are characterized by low soil organic matter, lack of sufficient precipitation and occurrence of high temperatures at the terminal of growing season. Effects of foliar application of salicylic acid (SA) and ascorbic acid (AS) during vegetative and reproductive stages at three farmyard manure (FYM) rates (zero (FYM1), 15 (FYM2), 30 (FYM3)t·ha-1) were studied on the growth and yield components of lentil (Lens culinaris Medik.) under supplemental irrigation of semi-arid highland in the north-west of Iran. The results revealed that application of farmyard manure especially at high level could significantly increase the morp-ho-physiological traits such as plant height, first pod height, plant canopy spread, rooting depth, the number of root nodules, ground cover, chlorophyll content and relative water content. Although improving effects of SA and AS on growth parameter were less than FYM, plants treated with SA showed better performance than plants treated with AS. A similar status was observed for grain yield and yield component. So the highest grain yield was recorded at FYM by foliar application of SA. It can be concluded that FYM3 as the most promising manure application rate was adopted to improve both root and total above-ground plant growth. Also this work highlights the importance of exogenous application of growth regulators in lentil cropping systems in semi-arid region with the Mediterranean climate.

Author(s):  
Naser Sabaghnia

AbstractInterest in growing lentil (Lens culinaris Medik.) is increasing due to its potential returns relative to other legume crops in semi-arid areas. An experiment was conducted to examine the important traits on lentil under application of nano-fertilizer by using eight genotypes with application of the biplot technique in visualizing research data. Nano-iron oxide (2 g L-1) was utilized as foliar spray during vegetative and reproductive stages. The study revealed that genotype by trait (GT) biplot can graphically display the interrelationships among traits and facilitate visual comparison of genotypes. The first two principal components (PC1 and PC2) accounted for 76% of the total variation. The polygon view of GT biplot suggested four sections for the lentil genotypes as well as traits. The vertex genotypes G1 had plant height, number of branches per plant, number of pods per plant, 100-grains weight and grain yield traits. The most prominent relation were: a strong positive association among biological yield, number of branches per plant, number of pods per plant, grains yield and plant height as indicated by the small obtuse angles between their vectors. The traits’ relationship in the semi-arid was highly variable, and grain yield improvement can be achieved by selecting for number of pods per plant, 100-grains weight. We suggest that the GT biplot be used jointly to better understand and more fully explore interaction pattern data.


2016 ◽  
Vol 107 (2) ◽  
pp. 265 ◽  
Author(s):  
Mohsen JANMOHAMMADI ◽  
Tahereh AMANZADEH ◽  
Naser SABAGHNIA ◽  
Shahryar DASHTI

Nano-fertilizers are new generation of the synthetic<em> </em>fertilizers which contain readily available nutrients in nano scale range. Nano fertilizers are preferred largely due to their efficiency and environment friendly nature compared to conventional<em> </em>chemical<em> </em>fertilizers. To evaluate the effects of foliar spray<em> </em>of micronutrient nano-fertilizer (iron and zinc) and nano-titanium dioxide (nTiO<sub>2</sub>) solution on grain yield and its components in barley under supplemental<em> </em>irrigation conditions, a field experiment was carried out in the semi-arid highland region of Maragheh, Iran. Barley plants were separately treated with of chelated nano-scale zinc oxide (ZnO) and ferric oxide (Fe<sub>2</sub>O<sub>3</sub>) suspensions during tillering stage, booting and milky stages. Results revealed that days to<em> </em>anthesis and maturity significantly increased after application of both nano-fertilizers. Furthermore<em>,</em> a considerable improvement was observed in grain mass, spike length, number of the grains per spike, chlorophyll content, grain yield and harvest index by application of nano-fertilizer. However the impact of nano zinc fertilizer was more prominent than iron. Foliar application of nTiO<sub>2</sub> positively affected some morphophysiological characteristics like as days to<em> </em>anthesis, chlorophyll content and straw yield. The results suggest that the delivery of Zn into barley seedling through spray of nano-fertilizer can be an efficient nutrient management strategy in semi-arid regions. Overall, our result indicated that the integration of nanotechnology in fertilizer products can improve fertilizer use efficiency and significantly increase of barley yield. However, plant response to nanoparticles significantly depend on concentration and time of application as well as size, shape, and surface functionalization of the particles.


Processes ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 420 ◽  
Author(s):  
Shashidhar K. Shankarappa ◽  
Samuel J. Muniyandi ◽  
Ajay B. Chandrashekar ◽  
Amit K. Singh ◽  
Premaradhya Nagabhushanaradhya ◽  
...  

Lentil (Lens culinaris) is an important winter season annual legume crop known for its highly valued seed in human and animal nutrition owing to its high lysine and tryptophan content. Shortage of water during the crop growth period has become the major impediment for cultivation of pulses in rice fallow in particular. Under such conditions, the application of hydrogel can be a potential alternative to improve photosynthetic efficiency, assimilate partitioning, and increase growth and yield. A field experiment was conducted from November to February during 2015–16 to 2017–18 on clay loam soil that was medium in fertility and acidic in reaction (pH 5.4) at Central Agricultural University, Imphal, Manipur. The experiment was laid out in split plot design with three replications. There were three hydrogel levels in total in the main plot and foliar nutrition with five different nutrient sprays in sub-plots, together comprising 15 treatment combinations. The data pooled over three years, 2015–2018, revealed that application of hydrogel at 5 kg/ha before sowing recorded a significantly greater number of pods per plant (38.0) and seed yield (1032.1 kg/ha) over the control. Foliar application of nutrients over flower initiation and pod development had a positive effect on increasing the number of pods per plant eventually enhanced the seed yield of lentil. Foliar application of either 0.5% NPK or salicylic acid 75 ppm spray at flower initiation and pod development stages recorded significantly more pods per plant over other nutrient treatments. Further, the yield attributed improved because of elevated growth in plant. Significantly maximum seed yield (956 kg/ha) recorded in the NPK spray of 0.5% remained on par with salicylic acid 75 ppm (939 kg/ha) over the rest of the treatments.


2014 ◽  
Vol 6 (4) ◽  
pp. 188 ◽  
Author(s):  
Joseph Adigun ◽  
A. O. Osipitan ◽  
Segun Toyosi Lagoke ◽  
Raphael Olusegun Adeyemi ◽  
Stephen Olaoluwa Afolami

Weed problem appears to be the most deleterious factor causing between 25 and 60% reduction in potential yield of cowpea. Field trials were therefore conducted to study the effect of inter-row spacing and period of weed interference on growth and yield of cowpea (Vigna unguiculata (L) Walp) at the Teaching and Research Farm of the Federal University of Agriculture, Abeokuta (07° 15'; 03° 25' E) in South Western Nigeria during the early and late wet seasons of 2009. The experiment consisted of eight main plots of weed interference which included initial weed removal for 3, 6, 9, and 12 weeks after sowing (WAS) and subsequently weed –infested until harvest as well as initial weed infestation for corresponding periods and thereafter kept weed free until harvest. There were also sub-plot treatments of three inter-row spacing of 60, 75, and 90 cm. All treatments in different combinations were laid out in a split-plot design with three replications. In both trials, the use of inter-row spacing of 60 cm resulted in significant reduction in weed growth as evident in lower weed dry matter production and subsequent higher cowpea pod and grain yields than those of 75 and 90 cm inter-row spacing. Initial weed infestation of up to 3 WAS did not have any adverse effect on crop growth and cowpea grain yields provided the weeds were subsequently removed. On the other hand, cowpea grain yield loss was not significantly averted by keeping the crop weed free for only 3 WAS without subsequent weed removal. In this study, initial weed-infestation for 6 WAS and beyond significantly depressed various crop growth parameter and cowpea grain yield compared with the crop kept weed free throughout its life cycle. In order to obtain optimum yields similar to that of the weed free cowpea field, it was required to keep the crop weed free for 6 WAS and beyond. However, frequent weeding beyond 9 weeks after sowing did not improve cowpea yield significantly and as a matter of fact it may even result in reduction of cowpea grain yield due to mechanical damage of hoe weeding. The practical implication of this finding is that early weeding starting from 3 WAS is very crucial for cowpea production while the critical period of weed removal for optimum yield in cowpea is between 3 and 9 WAS in the forest-savannah transitional zone of south Western Nigeria.


Author(s):  
Mohsen Janmohammadi ◽  
Hamid Mostafavi ◽  
Naser Sabaghnia

Abstract Lentil (Lens culinaris Medic.) is one of the important pulse crops in semiarid agro-ecological zones with a Mediterranean-type climate. Terminal drought stress and poor plant nutrition are important factors limiting crop under these regions. The effects of enzymatic biofertiliser (MOG) application at sowing time or during reproductive stage on some morphological traits and yield components of eight lentil lines were evaluated under deficit-irrigation conditions at Maragheh (37°23' N; 46°16' E) in northwestern Iran. Results revealed that application of biofertiliser did not significantly affect most of the morphological traits. However, foliar application of MOG during early flowering stage somewhat increased 100-grain weight and grain yield and decreased the number of empty pod per plant. Moreover, the results indicated that there was significant diversity between lentil lines for the investigated traits. The best performance for grain yield was recorded for FLIP 86-35L. The overall lack of considerable response of lentil to the MOG treatments may suggest that the optimal efficiency of biofertiliser cannot be achieved under water scarcity conditions. Improvement in the adaptation of enzymatic fertilisers to semi arid regions with terminal drought stress requires to be increased.


1993 ◽  
Vol 29 (2) ◽  
pp. 233-243 ◽  
Author(s):  
Y. S. Chauhan ◽  
C. Johansen ◽  
Laxman Singh

SummaryThe adaptation of extra short duration (ESD) pigeonpea (Cajanus cajan) genotypes to rainfed environments was studied on Alfisols and Vertisols at the ICRISAT Center between 1987 and 1989. Despite a slightly shorter crop duration, the grain yield of ESD genotypes was twice as large on Alfisols as on Vertisols. On both soil types, the rate of growth and grain yield were better in crops sown on time than in those where sowing was delayed. The population levels necessary to maximize yield varied among genotypes on Alfisols, where the grain yield of several ESD genotypes compared favourably with that of ICPL 87, a standard short duration genotype. However, none of the ESD genotypes yielded more than ICPL 87 on the Vertisols.


1982 ◽  
Vol 22 (115) ◽  
pp. 54 ◽  
Author(s):  
WM Strong

On the Darling Downs the growth and yield of a semi-dwarf wheat (cv. Oxley) under supplementary irrigation was increased by the application of up to 400 kg/ha of nitrogen (N) at planting. Nitrogen at 50 or 100 kg/ha applied at the boot stage to supplement 100 kg/ha applied at planting increased grain yield by 459 and 478 kg/ha, respectively. However, yields were still below those where all the N was applied at planting. In contrast, supplementary N (0, 25, 50 or 100 kg/ha) at flowering or after flowering generally did not increase grain yield. One exception to this was where only 50 kg/ha was applied at planting; an additional 100 kg/ha at flowering increased grain yield by 602 kg/ha. Applied at planting, more than 200 kg/ha of N was needed to produce premium grade wheat (i.e. protein content above 11.4%). To achieve this protein content where 100 kg/ha had been applied at planting an additional 100 kg/ha was needed at the boot stage or 50 kg/ha at flowering. Applied after flowering, up to 100 kg/ha of additional N produced wheat of a protein content too low to attract a premium payment. A similar quantity of N was assimilated whether the entire N application was applied at planting or where the application was split between planting and boot or flowering. Less N was assimilated when the application was split between planting and after flowering. More N was assimilated from soil than from foliar applications at the boot stage. Soil and foliar applications were equally effective at flowering in increasing the amount of N assimilated as well as the grain protein content. However, after flowering foliar application was the more effective method. The application of N at flowering to increase the protein content of this semi-dwarf cultivar is not an attractive commercial practice. The price ratio of premium to Australian Standard White wheat in recent years (<1.071 ) is less than that needed (1.0954-1.3013) to justify splitting the N application to lift grain protein content above 11.4% at the expense of yield.


2019 ◽  
Vol 50 (6) ◽  
Author(s):  
Al-Mohmadi & Al-Ani

A field experiment was condueted at the experimental Farm, College of Agriculture University of AL-Anbar in replace location (Abu-Gheaib) in spring season of 2017. While in Fall season it was applied at AL-saqluwiya-Anbar Province 10 km west north of Falluga city to study the effect of four levels of licorice extractor (Glycyrrhiza glabra L.) (0,2,4 and 6) g.L-1 water and three (53,333, 66,666 and 88,888 plant) plant.ha-1. On growth and grain yield of Sorghum cv. Rabih. The experiment was applied using R.C.B.D. arranged in split plots with three replications. levels of plant densities were used as main-plot, while licorice extractor were used as sub-plot. Foliar application of licorice extractor was applied during vegetative growth. The results showed that, high plant density (88888) plant.h-1 significantly increase plant height and leaf area index, while most of traits were not significantly influenced by plant density including grain yield. Results revealed that foliar application of licorice extractor with 2,4,6 g.L-1 of water significantly influenced grain yield in spring season compane with control treatment and it is amounted to (9.62, 9.55 and 9.78) t.h-1 respectively. There were significant interaction between Licorice extractor and plant density in spring and fall season in grain yield. The higher grain yield of 10.31 and 10.33 t.h-1 were obtained when sorghum plants were sowing at hight density and sprayed with Licorice extractor at level          4 g.L-1 respectively


2019 ◽  
Vol 11 (4) ◽  
pp. 823-829
Author(s):  
Ganpat Louhar

Wheat is one of the most important cereal crop and staple foods in the world. Increase in productivity of wheat by balance nutrient management is one of the most crucial factors. The main objective this study is to assessing the role of micronutrients in improving different components of wheat yield. There are different methods of application such as seed priming, soil application and fortification but foliar application is more beneficial. This is due to response of foliar application has positive and quadrate in nature i.e. the optimum dose of foliar application of zinc for grain yield of wheat was observed as 0.04%. Among treatments of micronutrient alone or combined forms give better results over control. Results have show that micronutrient application substantially improved leaf area index (LAI), leaf area duration, CGR (Crop growth rate), RGR (Relative growth rate), NAR (Net assimilation rate), plant height, spike length, spikelets/spike, grains/spike, test weight, tillers m-2, grain yield, chlorophyll content and biological yield as well as harvest index of wheat. The yield and quality of wheat products improved and boosted by micronutrient applications. Therefore, human and animal health will be protected with the feed of enriched and balanced nutrition of produce as well as it will help in facing the severe global food security.


Author(s):  
Mohammad Mohsin Faqeer ◽  
Muhammad Aquil Siddiqui ◽  
Nighat Seema Soomro ◽  
Shameem Raja ◽  
Muhammad Tahir Khan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document