scholarly journals Exhaustive Study of the PV Module Implemented in the Region of Annaba-Algeria

2020 ◽  
Vol 57 (6) ◽  
pp. 65-74
Author(s):  
A. Dekhane ◽  
B. Lamri ◽  
N. Benamira
Keyword(s):  
Renewable Energy Sources ◽  
Coastal Region ◽  
Climatic Conditions ◽  
Photovoltaic Module ◽  
Cell Temperature ◽  
Partial Shading ◽  
Pv Module ◽  
Current Voltage ◽  
Exhaustive Study ◽  
The Impact

AbstractAlgeria, like any other country, has drawn up its roadmap for the use and promotion of renewable energy sources. Motivated by its commitment to the international community in the fight against global warming and its possession of one of the largest solar fields in the world, a series of laws and institutions have consolidated this ambitious schedule. As known, both the climate and the geological area of Algeria take place among the foremost favoured countries in the field of solar energy. The present paper aims at proposing a simple model of photovoltaic module.The authors used Matlab/Simulink software to predict the current-voltage and power-voltage characteristics according to the influence of several factors, such as solar irradiance, cell temperature and series resistance, on the efficiency of photovoltaic module. The proposed experimental investigation can easily predict the curves (current-voltage and power-voltage) of a PV module, where both of simulation and practical results are identical. A single-crystal-line photovoltaic module was introduced close to Badji-Mokhtar Annaba University, Annaba (Algeria) to show the impact of climatic conditions in this coastal region and partial shading on characteristics.

scholarly journals Modeling of Photovoltaic Module Using the MATLAB

2019 ◽  
Vol 9 ◽  
pp. 59-69
Author(s):  
Alok Dhaundiyal ◽  
Divine Atsu
Keyword(s):  
Standard Test ◽  
Electrical Performance ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Pv Module ◽  
Proposed Model ◽  
Current Voltage ◽  
Pv Modules ◽  
The Impact ◽  
The Mathematical Model

This paper presents the modeling and simulation of the characteristics and electrical performance of photovoltaic (PV) solar modules. Genetic coding is applied to obtain the optimized values of parameters within the constraint limit using the software MATLAB. A single diode model is proposed, considering the series and shunt resistances, to study the impact of solar irradiance and temperature on the power-voltage (P-V) and current-voltage (I-V) characteristics and predict the output of solar PV modules. The validation of the model under the standard test conditions (STC) and different values of temperature and insolation is performed, as well as an evaluation using experimentally obtained data from outdoor operating PV modules. The obtained results are also subjected to comply with the manufacturer’s data to ensure that the proposed model does not violate the prescribed tolerance range. The range of variation in current and voltage lies in the domain of 8.21 – 8.5 A and 22 – 23 V, respectively; while the predicted solutions for current and voltage vary from 8.28 – 8.68 A and 23.79 – 24.44 V, respectively. The measured experimental power of the PV module estimated to be 148 – 152 W is predicted from the mathematical model and the obtained values of simulated solution are in the domain of 149 – 157 W. The proposed scheme was found to be very effective at determining the influence of input factors on the modules, which is difficult to determine through experimental means.

The Impact Mitigation of Partial Shading on PV Array Power Generation

2015 ◽  
Vol 781 ◽  
pp. 267-271
Author(s):  
Santisouk Phiouthonekham ◽  
Anucha Lekkruasuwan ◽  
Surachai Chaitusaney
Keyword(s):  
Power Generation ◽  
Solar Irradiation ◽  
Testing System ◽  
Partial Shading ◽  
Pv Array ◽  
Pv Module ◽  
Time Period ◽  
Current Voltage ◽  
Pv Modules ◽  
The Impact

The impact of partial shading on photovoltaic (PV) array is discussed in this paper. The partial shading on PV array can significantly decrease the power generation of PV array. This study examines the modeling of PV module which relates with solar irradiation, temperature, and shading pattern. There are different shading patterns on PV array, such as one-string shading, two-strings shading, and much more. The characteristics of current-voltage (I-V) and voltage-power (V-P) curves for each individual the PV array can be different dependent on the multiple MPPs, maximum power points (MPPs). These multiple MPPs are basically lower than the MPP in case of no shading. Therefore, the total generated energy in an interested time period is usually reduced. As a result, this paper proposes the appropriate arrangement of PV modules in a PV array in order to mitigate the impact of partial shading. Finally, the proposed arrangement of PV modules is tested in a testing system. All the obtained results confirms that the proposed arrangement of PV modules is effective and can be applied in practice.

scholarly journals Modeling the Functioning of the Half-Cells Photovoltaic Module under Partial Shading in the Matlab Package

2020 ◽  
Vol 10 (7) ◽  
pp. 2575
Author(s):  
Mariusz T. Sarniak
Keyword(s):  
Simulation Model ◽  
Internal Structure ◽  
Photovoltaic Module ◽  
Partial Shading ◽  
Photovoltaic Modules ◽  
Pv Module ◽  
Current Voltage ◽  
Replacement Model ◽  
Current Voltage Characteristics ◽  
Matlab Package

In this paper, the usefulness of photovoltaic modules built of half cells for partially obstructed photovoltaic (PV) installations was analyzed based on verified simulation studies. The parameters of these modules are similar to the classic, but the internal structure is different. Instead of 60 cells in a typical classic PV module, there are twice as many cells in modules with half cells. A simulation model was built in the Matlab/Simulink engineering calculations package, using the “Solar Cell” component, which is a double-diode PV cell replacement model. The simulation model reflects the internal structure of the PV module from half cells so that the output current is divided into two equal parts inside, and the structure of the module is divided into six sections. Simulation tests were performed for the same parameters that were measured during actual measurements of the current–voltage characteristics of the partially shaded PV module. Verification tests were carried out for the photovoltaic module—JAM60S03-320/PR—using the I–V 400 meter. Four different cases of partial shading of the module were verified and one for the case of no shading, but in conditions different from the standard, given by the manufacturer.

Research on the Impact of Shadow on the Performance of Building Photovoltaic System

2014 ◽  
Vol 694 ◽  
pp. 163-168
Author(s):  
Liang Guo ◽  
Yun Liang ◽  
Xu Zhang ◽  
Xiao Tian Yang
Keyword(s):  
System Performance ◽  
Rapid Development ◽  
Photovoltaic System ◽  
Future Research ◽  
Photovoltaic Module ◽  
Pv Module ◽  
New Energy ◽  
Generation Capacity ◽  
The Impact ◽  
Support Cost

With the rapid development of world economy, the energy crisis has become one of the urgent problems to be solved. Photovoltaic technology is a green new energy industry, no pollution is widely used all over the world. Typically, for photovoltaic component installation, only considering the utilization of components support cost and area, and the arrangement of components have not given enough attention. Photovoltaic module in use process will inevitably encounter the shadow, the shadow changes to make appropriate adjustments to the PV module arrangement can enhance the power generation capacity. Effect of the shadow on the photovoltaic system performance can be effectively used for photovoltaic component to bring help, is of positive significance. This study analyzed the villa model typical, and the rectangular shadow is modeling, in order to analyze the influence on the photovoltaic component. Through the conclusion of this study can determine the horizontal and vertical components of photovoltaic components which caused little damage, and provide a reference for future research of shadow and photovoltaic system performance.

scholarly journals ANALYSIS AND SIMULATION OFF-GRID PV PANELS BY USING MATLAB / SIMULINK ENVIRONMENT

2021 ◽  
pp. 97-105
Author(s):  
L. M. Abdali ◽  
H. A. Issa ◽  
Q. A. Ali ◽  
V. V. Kuvshinov ◽  
E. A. Bekirov
Keyword(s):  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Test System ◽  
Photovoltaic System ◽  
Photovoltaic Module ◽  
Operating Modes ◽  
Pv Module ◽  
Pv Modules ◽  
Generating System

The use of renewable energy sources and in particular solar energy has received considerable attention in recent decades. Photovoltaic (PV) energy projects are being implemented in very large numbers in many countries. Many research projects are carried out to analyze and verify the performance of PV modules. Implementing a pilot plant for a photovoltaic power system with a DC / DC converter to test system performance is not always possible due to practical limitations. The software simulation model helps to analyze the performance of PV modules, and more useful would be a general circuit model that can be used to test any commercial PV module. This paper presents a simulation of a mathematical model of a photovoltaic module that boosts a DC / AC converter and also simulates the operating modes of a solar generating system at various load characteristics. The model presented in this article can be used as a generalized PV module to analyze the performance of any commercially available PV module. In the presented work, the parameters that affect the performance of the generating system were investigated. The results were obtained for the operation of DC/AC photoelectric converters. The presented characteristics strongly depend on such parameters as solar insolation, the temperature of the working surface of the photovoltaic module, the charge-discharge time of storage batteries, etc. When one of the values ​​of these parameters changes, the operating modes of the solar power generating battery change. Changing the operating modes can lead to malfunctions of the entire operation of the system, therefore, it is necessary to control all the energy characteristics of the installation. The actions proposed in this work aimed at studying the operation of the photovoltaic system and the energy storage system, as well as the use of the necessary auxiliary devices for monitoring and controlling the parameters of the installation, are capable of achieving an increase in the efficiency of the generation of the system. The studies carried out in the course of the presented work make it possible to increase the level of knowledge on the control and management of the parameters of photovoltaic generating plants and expand the possibilities of their uninterrupted operation and increase energy production.

scholarly journals Shading, Dusting and Incorrect Positioning of Photovoltaic Modules as Important Factors in Performance Reduction

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1992 ◽  
Author(s):  
Ewa Klugmann-Radziemska
Keyword(s):  
Solar Radiation ◽  
Experimental Studies ◽  
Design Stage ◽  
Photovoltaic Module ◽  
The Sun ◽  
Partial Shading ◽  
Uneven Terrain ◽  
Performance Reduction ◽  
Angle Of Deviation ◽  
The Impact

The amount of solar radiation reaching the front cover of a photovoltaic module is crucial for its performance. A number of factors must be taken into account at the design stage of the solar installation, which will ensure maximum utilization of the potential arising from the location. During the operation of a photovoltaic installation, it is necessary to limit the shading of the modules caused by both dust and shadowing by trees or other objects. The article presents an analysis of the impact of the radiation reaching the surface of the radiation module on the efficiency obtained. Each of the analyzed aspects is important for obtaining the greatest amount of energy in specific geographical conditions. Modules contaminated by settling dust will be less efficient than those without deposits. The results of experimental studies of this effect are presented, depending on the amount of impurities, including their origins and morphologies. In practice, it is impossible to completely eliminate shadowing caused by trees, uneven terrain, other buildings, chimneys, or satellite dishes, and so on, which limits the energy of solar radiation reaching the modules. An analysis of partial shading for the generated power was also carried out. An important way for maximizing the incoming radiation is the correct positioning of the modules relative to the sun. It is considered optimal to position the modules relative to the light source, that is, the sun, so that the rays fall perpendicular to the surfaces of the modules. Any deviation in the direction of the rays results in a loss in the form of a decrease in the available power of the module. The most beneficial option would be to use sun-tracking systems, but they represent an additional investment cost, and their installations require additional space and maintenance. Therefore, the principle was adopted that stationary systems should be oriented to the south, using the optimal angle of inclination of the module surface appropriate for the location. This article presents the dependence of the decrease in obtained power on the angle of deviation from the optimal one.

Climate change impact on photovoltaic potential in Poland

2021 ◽  
Author(s):  
Malgorzata Zdunek
Keyword(s):  
Climate Change ◽  
Fossil Fuels ◽  
Climate Models ◽  
Energy System ◽  
Climatic Conditions ◽  
Suburban Areas ◽  
Pv Module ◽  
Change Impact ◽  
Module Performance ◽  
The Impact

<p>Due to global warming and the worldwide depletion of fossil fuel resources, there is a growing need to transform the energy system toward greater use of renewable sources. In Poland, poor air quality constitutes an additional argument for the necessity of such transition. High levels of pollutants concentrations in many locations, especially in urban and suburban areas are caused by emissions from individual heating systems running on fossil fuels.</p><p><span> Data from recent years show </span><span>that renewable generation forms the largest share of the total generation mix in Europe</span><span>. </span><span>Regarding new installation, solar and wind energy dominate renewable </span><span>capacity expansion, jointly accounting for example in 2019 for 90% of all net renewable additions.</span><span> However, along with the increase in the penetration of these energy sources also increases the sensitivity of the power system to weather and climatic conditions.</span></p><p>The study presents the impact of climate change up to the year 2100 on the photovoltaic power generation potential (Pvpot) in Poland. For determination of Pvpot index a set of high-resolution climate models projections, made available within the EURO-CORDEX initiative was used. Maps showing spatial distribution of absolute values of Pvpot in future climate (30-year average for 2071-2100) and relative changes with respect to current climate (30-year average for 2006-2035) are presented, separately for RCP4.5 and RCP8.5 scenario. The influence of meteorological conditions (temperature, wind and solar radiation) on PV module performance is taken into account by applying two different formula (Ciulla et. al, 2014 and Davy and Troccoli, 2012). Furthermore, two options for module orientation are considered: horizontal and inclined at an optimal angle.</p>

Performance Analysis of Innovative Top Cooling Thermal Photovoltaic (TPV) Modules Under Tropics

2016 ◽  
Author(s):  
Swapnil Dubey ◽  
C. S. Soon ◽  
Sin Lih Chin ◽  
Leon Lee
Keyword(s):  
Solar Energy ◽  
Thermal Energy ◽  
Waste Heat ◽  
Heat Removal ◽  
Hot Water ◽  
Photovoltaic Module ◽  
Cell Temperature ◽  
Collector System ◽  
Pv Panel ◽  
Pv Module

The main focus area of this research paper to efficiently remove the heat generated during conversion of solar energy into electricity using photovoltaic (PV) module. The photovoltaic conversion efficiency of commercial available PV module varies in the range of 8%–20% depending on the type of solar cell materials used for the module construction, e.g. crystalline silicon, thin film, CIGS, organic, etc. During the conversion process, only a small fraction of the incident solar radiation is utilize by PV cells to produce electricity and the remaining is converted into waste heat in the module which causes the PV cell temperature to increase and its efficiency to drop. This thermal energy could be extract using air or water as a heat removal fluid to utilize in heating applications. The purpose of a solar photovoltaic module is to convert solar energy into electricity. The hybrid combination of photovoltaic module and thermal collector called Photovoltaic-thermal (PVT) module. Such PVT module combines a PV, which converts electromagnetic radiation (photons) into electricity, with a solar thermal module, which captures the remaining energy and removes waste heat from the PV module. Cooling of cells either by natural or forced circulation can reduce the PV cell temperature. The simultaneous cooling of the PV cells maintains their PV efficiency at a satisfactory level and offers a better way of utilizing solar energy by generating thermal energy as well. PVT system has higher overall efficiency as compared to separate PV and thermal collector. The heat output of a PVT module can be used for space heating or production of domestic hot water. This paper presents an innovative design of top cooling Thermal Photovoltaic (T-PV) module and its performance under outdoor weather condition of Singapore. T-PV collector is designed to flow fluid over the top of PV panel through a very narrow gap between the solar lens. This process improves heat removal process from PV panel, and hence, improves the electrical output of PV panel as compared to other PVT collector available in the market. By flowing the water from top of the PV panel will also provide better thermal efficiency. A T-PV collector system with storage tank, sensors, pump, flow meters, data logger and controls, have been installed at test-site located in Ngee Ann Polytechnic, Singapore. Performance analysis of T-PV collector system has been evaluated under the tropical climatic conditions of Singapore. It was found that T-PV module could produce additional electrical power as compared to standard PV panel of same capacity by operating at lower temperature. In addition to electricity, T-PV panel also generate the hot water up to 60 deg C at an average thermal efficiency of 41% for usage in residential and commercial buildings. The average thermal energy output was 3.1 kWh/day on typical day’s basis.

scholarly journals Validation of Thermal Models for Polycrystalline Photovoltaic Module Under Derna City Climate Conditions

2021 ◽  
Vol 7 (2) ◽  
Author(s):  
Mahmood Abdel hadi ◽  
Yasser Aldali ◽  
Ali N Celik
Keyword(s):  
Ambient Temperature ◽  
Linear Models ◽  
Theoretical Models ◽  
Climatic Conditions ◽  
Solar Irradiation ◽  
Photovoltaic Module ◽  
Cell Temperature ◽  
Climate Conditions ◽  
Quantitative Indicators ◽  
Temperature Correlations

The main objective of the present paper is to compare nine different cell temperature models available in the literature with data measured under real Derna city climatic conditions (a semi arid climate) for month of August. The study focuses on a comparison of nine theoretical models to calculate the cell temperature based on the experimental measurements such as the ambient temperature, irradiance, and wind speed in some of the models. The presently used models are explicit, depending on the easily measurable parameters and of wide applicability. Six statistical quantitative indicators are used to evaluate the cell temperature models analysed, namely, R2, RMSE, RRMSE, MAE, MBE and MARE. The cell temperature correlations presently studied, first order linear models depending on the ambient temperature, solar irradiation incident on the panel and voltage output, provide the most accurate cell temperature estimations at Derna city climatic conditions.

Sign in / Sign up

Export Citation Format

Share Document