scholarly journals An attempt to increase technological capabilities of laboratory vibratory mills by changing the construction of chamber

2019 ◽  
Vol 2 (1) ◽  
pp. 195-205
Author(s):  
Paweł Tomach
Keyword(s):  
Vibration Frequency ◽  
High Performance ◽  
High Energy ◽  
Grinding Process ◽  
Technological Capabilities ◽  
Periodic Action ◽  
Load Movement ◽  
The Subject ◽  
Industrial Use ◽  
Chamber Diameter

Abstract The paper presents the issues related to the grinding process in the vibration mills with low vibration frequency. These mills are rated among devices with high energy of impacts with much wider potential of industrial use than the classic gravitation mills. In vibratory mills there is an unfavorable decrease in the intensity of the grinding process along with the increase in the chamber diameter, which makes it impossible to achieve high performance of such devices. One of the ways to reduce or eliminate this occurrence is to intensify the load movement inside the chamber – this is the subject of this article. The article shows that in a vibrating mill of periodic action it is possible to increase its technological capabilities by application of an appropriate cylindrical component permanently installed inside the milling chamber. The paper also presents an attempt to increase the technological capabilities of a laboratory continuous vibratory mill.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Performance Management Transformation

2020 ◽  
Keyword(s):  
Organizational Performance ◽  
Performance Management ◽  
High Performance ◽  
Best Practice ◽  
Call To Action ◽  
Daily Work ◽  
The Past ◽  
Great Debate ◽  
The Subject ◽  
New Research

No other talent process has been the subject of such great debate and emotion as performance management (PM). For decades, different strategies have been tried to improve PM processes, yielding an endless cycle of reform to capture the next “flavor-of-the-day” PM trend. The past 5 years, however, have brought novel thinking that is different from past trends. Companies are reducing their formal processes, driving performance-based cultures, and embedding effective PM behavior into daily work rather than relying on annual reviews to drive these. Through case studies provided from leading organizations, this book illustrates the range of PM processes that companies are using today. These show a shift away from adopting someone else’s best practice; instead, companies are designing bespoke PM processes that fit their specific strategy, climate, and needs. Leading PM thought leaders offer their views about the state of PM today, what we have learned and where we need to focus future efforts, including provocative new research that shows what matters most in driving high performance. This book is a call to action for talent management professionals to go beyond traditional best practice and provide thought leadership in designing PM processes and systems that will enhance both individual and organizational performance.

scholarly journals Geometry and Distortion Prediction of Multiple Layers for Wire Arc Additive Manufacturing with Artificial Neural Networks

2021 ◽  
Vol 11 (10) ◽  
pp. 4694
Author(s):  
Christian Wacker ◽  
Markus Köhler ◽  
Martin David ◽  
Franziska Aschersleben ◽  
Felix Gabriel ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Welding Process ◽  
High Energy ◽  
Welding Distortion ◽  
Direct Energy Deposition ◽  
Direct Energy ◽  
Industrial Use ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Wire Arc Additive Manufacturing

Wire arc additive manufacturing (WAAM) is a direct energy deposition (DED) process with high deposition rates, but deformation and distortion can occur due to the high energy input and resulting strains. Despite great efforts, the prediction of distortion and resulting geometry in additive manufacturing processes using WAAM remains challenging. In this work, an artificial neural network (ANN) is established to predict welding distortion and geometric accuracy for multilayer WAAM structures. For demonstration purposes, the ANN creation process is presented on a smaller scale for multilayer beads on plate welds on a thin substrate sheet. Multiple concepts for the creation of ANNs and the handling of outliers are developed, implemented, and compared. Good results have been achieved by applying an enhanced ANN using deformation and geometry from the previously deposited layer. With further adaptions to this method, a prediction of additive welded structures, geometries, and shapes in defined segments is conceivable, which would enable a multitude of applications for ANNs in the WAAM-Process, especially for applications closer to industrial use cases. It would be feasible to use them as preparatory measures for multi-segmented structures as well as an application during the welding process to continuously adapt parameters for a higher resulting component quality.

scholarly journals Defect-induced B4C electrodes for high energy density supercapacitor devices

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Özge Balcı ◽  
Merve Buldu ◽  
Ameen Uddin Ammar ◽  
Kamil Kiraz ◽  
Mehmet Somer ◽  
...  
Keyword(s):  
Active Carbon ◽  
High Performance ◽  
Carbon Sources ◽  
High Energy ◽  
High Energy Density ◽  
Synthesis Conditions ◽  
High Energy Ball Mill ◽  
Energy Ball ◽  
G Ratio ◽  
Energy And Power Density

AbstractBoron carbide powders were synthesized by mechanically activated annealing process using anhydrous boron oxide (B2O3) and varying carbon (C) sources such as graphite and activated carbon: The precursors were mechanically activated for different times in a high energy ball mill and reacted in an induction furnace. According to the Raman analyses of the carbon sources, the I(D)/I(G) ratio increased from ~ 0.25 to ~ 0.99, as the carbon material changed from graphite to active carbon, indicating the highly defected and disordered structure of active carbon. Complementary advanced EPR analysis of defect centers in B4C revealed that the intrinsic defects play a major role in the electrochemical performance of the supercapacitor device once they have an electrode component made of bare B4C. Depending on the starting material and synthesis conditions the conductivity, energy, and power density, as well as capacity, can be controlled hence high-performance supercapacitor devices can be produced.

scholarly journals Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2942
Author(s):  
Bhausaheb V. Tawade ◽  
Ikeoluwa E. Apata ◽  
Nihar Pradhan ◽  
Alamgir Karim ◽  
Dharmaraj Raghavan
Keyword(s):  
Energy Density ◽  
Polymer Nanocomposites ◽  
High Performance ◽  
Breakdown Strength ◽  
Polymer Nanocomposite ◽  
High Energy ◽  
Polymer Chains ◽  
High Energy Density ◽  
Grafted Nanoparticles ◽  
Grafting From

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the ”grafting from” and ”grafting to” approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Sulfur vacancies in Co9S8-x/N-doped graphene enhancing electrochemical kinetics to high-performance lithium sulfur batteries

2021 ◽  
Author(s):  
Haojie Li ◽  
Yihua Song ◽  
Kai Xi ◽  
Wei Wang ◽  
Sheng Liu ◽  
...  
Keyword(s):  
Cathode Materials ◽  
High Performance ◽  
Catalytic Conversion ◽  
High Energy ◽  
Electrochemical Kinetics ◽  
Lithium Sulfur Batteries ◽  
Doped Graphene ◽  
Sulfur Battery ◽  
Areal Capacity ◽  
Lithium Sulfur

A sufficient areal capacity is necessary for achieving high-energy lithium sulfur battery, which requires high enough sulfur loading in cathode materials. Therefore, kinetically fast catalytic conversion of polysulfide intermediates is...

scholarly journals Efficient Catalytic Conversion of Polysulfides by Biomimetic Design of “Branch-Leaf” Electrode for High-Energy Sodium–Sulfur Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Wenyan Du ◽  
Kangqi Shen ◽  
Yuruo Qi ◽  
Wei Gao ◽  
Mengli Tao ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Electrochemical Reaction ◽  
Molecular Layer ◽  
Specific Capacity ◽  
High Energy ◽  
Reduction Reaction ◽  
Biomimetic Design ◽  
Co Nanoparticles ◽  
Sodium Sulfur

AbstractRechargeable room temperature sodium–sulfur (RT Na–S) batteries are seriously limited by low sulfur utilization and sluggish electrochemical reaction activity of polysulfide intermediates. Herein, a 3D “branch-leaf” biomimetic design proposed for high performance Na–S batteries, where the leaves constructed from Co nanoparticles on carbon nanofibers (CNF) are fully to expose the active sites of Co. The CNF network acts as conductive “branches” to ensure adequate electron and electrolyte supply for the Co leaves. As an effective electrocatalytic battery system, the 3D “branch-leaf” conductive network with abundant active sites and voids can effectively trap polysulfides and provide plentiful electron/ions pathways for electrochemical reaction. DFT calculation reveals that the Co nanoparticles can induce the formation of a unique Co–S–Na molecular layer on the Co surface, which can enable a fast reduction reaction of the polysulfides. Therefore, the prepared “branch-leaf” CNF-L@Co/S electrode exhibits a high initial specific capacity of 1201 mAh g−1 at 0.1 C and superior rate performance.

A High-Performance Free-Standing Zn Anode for Flexible Zinc-Ion Batteries

Nanoscale ◽  
2021 ◽  
Author(s):  
Chenxi Gao ◽  
Jiawei Wang ◽  
Yuan Huang ◽  
Zixuan Li ◽  
Jiyan Zhang ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Low Cost ◽  
High Energy ◽  
Zinc Ion ◽  
High Energy Density ◽  
Free Standing ◽  
Energy Device ◽  
Zn Anode ◽  
Significant Attention

Zinc-ion batteries (ZIBs) have attracted significant attention owing to their high safety, high energy density, and low cost. ZIBs have been studied as a potential energy device for portable and...

scholarly journals Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chris Sundahl ◽  
Junki Makita ◽  
Paul B. Welander ◽  
Yi-Feng Su ◽  
Fumitake Kametani ◽  
...  
Keyword(s):  
High Performance ◽  
High Energy ◽  
Particle Accelerators ◽  
Quality Factors ◽  
Critical Fields ◽  
Linear Accelerators ◽  
Cross Sectional ◽  
Low Field ◽  
Superconducting Radio Frequency

AbstractSuperconducting radio-frequency (SRF) resonator cavities provide extremely high quality factors > 1010 at 1–2 GHz and 2 K in large linear accelerators of high-energy particles. The maximum accelerating field of SRF cavities is limited by penetration of vortices into the superconductor. Present state-of-the-art Nb cavities can withstand up to 50 MV/m accelerating gradients and magnetic fields of 200–240 mT which destroy the low-dissipative Meissner state. Achieving higher accelerating gradients requires superconductors with higher thermodynamic critical fields, of which Nb3Sn has emerged as a leading material for the next generation accelerators. To overcome the problem of low vortex penetration field in Nb3Sn, it has been proposed to coat Nb cavities with thin film Nb3Sn multilayers with dielectric interlayers. Here, we report the growth and multi-technique characterization of stoichiometric Nb3Sn/Al2O3 multilayers with good superconducting and RF properties. We developed an adsorption-controlled growth process by co-sputtering Nb and Sn at high temperatures with a high overpressure of Sn. The cross-sectional scanning electron transmission microscope images show no interdiffusion between Al2O3 and Nb3Sn. Low-field RF measurements suggest that our multilayers have quality factor comparable with cavity-grade Nb at 4.2 K. These results provide a materials platform for the development and optimization of high-performance SIS multilayers which could overcome the intrinsic limits of the Nb cavity technology.

Sign in / Sign up

Export Citation Format

Share Document