scholarly journals In situ thermal decomposition route: Preparation and characterization of nano nickel, cobalt, and copper oxides using an aromatic amine complexes as a low-cost simple precursor

2021 ◽  
Vol 23 (2) ◽  
pp. 47-53
Author(s):  
Moamen S. Refat ◽  
Soha F. Mohamed ◽  
Tariq A. Altalhi ◽  
Safyah B. Bakare ◽  
Ghaferah H. Al-Hazmi
Keyword(s):  
Thermal Decomposition ◽  
Lattice Structure ◽  
Low Cost ◽  
Average Diameter ◽  
Face Centered Cubic ◽  
Spinel Type ◽  
X Ray ◽  
Ft Ir ◽  
Xrd Patterns ◽  
Average Size

Abstract The main interest now is the development of metallic or inorganic-organic compounds to prepare nanoparticle materials. The use of new compounds could be beneficial and open a new method for preparing nanomaterials to control the size, shape, and size of the nanocrystals. In this article, the thermal decomposition of [M2(o-tol)2(H2O)8] Cl4 (where o-tol is ortho-tolidine compound, M = Ni2+, Co2+, Cu2+) new precursor complex was discussed in solid-state conditions. The thermal decomposition route showed that the synthesized three complexes were easily decomposed into NiO, Co3O4 and CuO nanoparticles. This decomposition was performed at low temperatures (~600°C) in atmospheric air without using any expensive and toxic solvent or complicated equipment. The obtained product was identified by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). FT-IR, XRD and EDX analyses revealed that the NiO nanoparticles exhibit a face-centered-cubic lattice structure with a crystallite size of 9–12 nm. The formation of a highly pure spinel-type Co3O4 phase with cubic structure showed that the Co3O4 nanoparticles have a sphere-like morphology with an average size of 8–10 nm. The XRD patterns of the CuO confirmed that the monoclinic phase with the average diameter of the spherical nanoparticles was approximately 9–15 nm.

Preparation and Characterization of Needle-Like ZnO on TiO2 Nanoparticles by Solution-Immersion Method and RF Magnetron Sputtering

2013 ◽  
Vol 832 ◽  
pp. 596-601 ◽  
Author(s):  
N.A.M. Asib ◽  
Aadila Aziz ◽  
A.N. Afaah ◽  
Mohamad Rusop ◽  
Zuraida Khusaimi
Keyword(s):  
Magnetron Sputtering ◽  
Average Diameter ◽  
Rf Magnetron Sputtering ◽  
Zno Nanostructures ◽  
X Ray Diffraction ◽  
Immersion Method ◽  
X Ray ◽  
Xrd Patterns ◽  
Average Size

Needle-like zinc oxide (ZnO) nanostructures was deposited on titanium dioxide (TiO2) nanoparticles by solution-immersion method and Radio Frequency (RF) magnetron sputtering with diffferent RF powers, respectively on a glass substrate to synthesis nanocomposites of ZnO/TiO2. Field Emission Scanning Electrons Microscope (FESEM) images demonstrate that needle-like ZnO (112-1110 nm) are deposited on the surface of the TiO2nanoparticles with the diameter of approximately 36.3-62.9 nm. At 200 W, more needle-like ZnO with smallest average diameter (112 nm) appeared on the TiO2nanoparticles, which also has the smallest average size of 36.3 nm The compositions of elements in the nanocomposites were showed by Energy Dispersive X-ray Spectrometry (EDX). All elements of Ti, O, and Zn are observed as major components which confirm the presence of TiO2and ZnO in the composite. X-ray Diffraction (XRD) patterns of the nanocomposites show ZnO formed on TiO2nanoparticles are hexagonal with a wurtzite structure and it revealed ZnO/TiO2thin films were succesfully deposited as nanocomposites of ZnTiO3at 100 W,Zn2TiO4at 150 W and Zn2Ti3O8at 200 W and above.

scholarly journals Functional Attributes of Myco-Synthesized Silver Nanoparticles from Endophytic Fungi: A New Implication in Biomedical Applications

Biology ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 473
Author(s):  
Prabu Kumar Seetharaman ◽  
Rajkuberan Chandrasekaran ◽  
Rajiv Periakaruppan ◽  
Sathishkumar Gnanasekar ◽  
Sivaramakrishnan Sivaperumal ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Culture Filtrate ◽  
Morphological Changes ◽  
Xrd Analysis ◽  
Penicillium Oxalicum ◽  
Breast Cancer Cell Lines ◽  
Face Centered Cubic ◽  
Tem Analysis ◽  
X Ray ◽  
Average Size

To develop a benign nanomaterial from biogenic sources, we have attempted to formulate and fabricate silver nanoparticles synthesized from the culture filtrate of an endophytic fungus Penicillium oxalicum strain LA-1 (PoAgNPs). The synthesized PoAgNPs were exclusively characterized through UV–vis absorption spectroscopy, Fourier Transform Infra-Red spectroscopy (FT-IR), X-ray powder diffraction (XRD), and Transmission Electron Microscopy (TEM) with energy dispersive X-ray spectroscopy (EDX). The synthesized nanoparticles showed strong absorbance around 430 nm with surface plasmon resonance (SPR) and exhibited a face-centered cubic crystalline nature in XRD analysis. Proteins presented in the culture filtrate acted as reducing, capping, and stabilization agents to form PoAgNPs. TEM analysis revealed the generation of polydispersed spherical PoAgNPs with an average size of 52.26 nm. The PoAgNPs showed excellent antibacterial activity against bacterial pathogens. The PoAgNPs induced a dose-dependent cytotoxic activity against human adenocarcinoma breast cancer cell lines (MDA-MB-231), and apoptotic morphological changes were observed by dual staining. Additionally, PoAgNPs demonstrated better larvicidal activity against the larvae of Culex quinquefasciatus. Moreover, the hemolytic test indicated that the as-synthesized PoAgNPs are a safe and biocompatible nanomaterial with versatile bio-applications.

scholarly journals Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1786
Author(s):  
Carla Queirós ◽  
Chen Sun ◽  
Ana M. G. Silva ◽  
Baltazar de Castro ◽  
Juan Cabanillas-Gonzalez ◽  
...  
Keyword(s):  
Water Content ◽  
Coordination Polymers ◽  
Metal Ion ◽  
Low Cost ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

Epitaxial Ni nanoparticles on CaF2(001), (110) and (111) surfaces studied by three-dimensional RHEED, GIXD and GISAXS reciprocal-space mapping techniques

2017 ◽  
Vol 50 (3) ◽  
pp. 830-839 ◽  
Author(s):  
S. M. Suturin ◽  
V. V. Fedorov ◽  
A. M. Korovin ◽  
N. S. Sokolov ◽  
A. V. Nashchekin ◽  
...  
Keyword(s):  
Lattice Structure ◽  
Three Dimensional ◽  
Grazing Incidence ◽  
High Energy ◽  
Reciprocal Space ◽  
Mapping Technique ◽  
Face Centered Cubic ◽  
X Ray ◽  
Cubic Lattice ◽  
Face Centered

The development of growth techniques aimed at the fabrication of nanoscale heterostructures with layers of ferroic 3dmetals on semiconductor substrates is very important for their potential usage in magnetic media recording applications. A structural study is presented of single-crystal nickel island ensembles grown epitaxially on top of CaF2/Si insulator-on-semiconductor heteroepitaxial substrates with (111), (110) and (001) fluorite surface orientations. The CaF2buffer layer in the studied multilayer system prevents the formation of nickel silicide, guides the nucleation of nickel islands and serves as an insulating layer in a potential tunneling spin injection device. The present study, employing both direct-space and reciprocal-space techniques, is a continuation of earlier research on ferromagnetic 3dtransition metals grown epitaxially on non-magnetic and magnetically ordered fluorides. It is demonstrated that arrays of stand-alone faceted nickel islands with a face-centered cubic lattice can be grown controllably on CaF2surfaces of (111), (110) and (001) orientations. The proposed two-stage nickel growth technique employs deposition of a thin seeding layer at low temperature followed by formation of the islands at high temperature. The application of an advanced three-dimensional mapping technique exploiting reflection high-energy electron diffraction (RHEED) has proved that the nickel islands tend to inherit the lattice orientation of the underlying fluorite layer, though they exhibit a certain amount of {111} twinning. As shown by scanning electron microscopy, grazing-incidence X-ray diffraction (GIXD) and grazing-incidence small-angle X-ray scattering (GISAXS), the islands are of similar shape, being faceted with {111} and {100} planes. The results obtained are compared with those from earlier studies of Co/CaF2epitaxial nanoparticles, with special attention paid to the peculiarities related to the differences in lattice structure of the deposited metals: the dual-phase hexagonal close-packed/face-centered cubic lattice structure of cobalt as opposed to the single-phase face-centered cubic lattice structure of nickel.

scholarly journals Micropipette-Based Microfluidic Device for Monodisperse Microbubbles Generation

Micromachines ◽  
2018 ◽  
Vol 9 (8) ◽  
pp. 387
Author(s):  
Carlos Toshiyuki Matsumi ◽  
Wilson José da Silva ◽  
Fábio Kurt Schneider ◽  
Joaquim Miguel Maia ◽  
Rigoberto E. M. Morales ◽  
...  
Keyword(s):  
Electric Fields ◽  
Microfluidic Device ◽  
Soft Lithography ◽  
Low Cost ◽  
Characteristic Curve ◽  
Microfluidic Devices ◽  
Average Diameter ◽  
Internal Diameter ◽  
Medical Diagnostic ◽  
Average Size

Microbubbles have various applications including their use as carrier agents for localized delivery of genes and drugs and in medical diagnostic imagery. Various techniques are used for the production of monodisperse microbubbles including the Gyratory, the coaxial electro-hydrodynamic atomization (CEHDA), the sonication methods, and the use of microfluidic devices. Some of these techniques require safety procedures during the application of intense electric fields (e.g., CEHDA) or soft lithography equipment for the production of microfluidic devices. This study presents a hybrid manufacturing process using micropipettes and 3D printing for the construction of a T-Junction microfluidic device resulting in simple and low cost generation of monodisperse microbubbles. In this work, microbubbles with an average size of 16.6 to 57.7 μm and a polydispersity index (PDI) between 0.47% and 1.06% were generated. When the device is used at higher bubble production rate, the average diameter was 42.8 μm with increased PDI of 3.13%. In addition, a second-order polynomial characteristic curve useful to estimate micropipette internal diameter necessary to generate a desired microbubble size is presented and a linear relationship between the ratio of gaseous and liquid phases flows and the ratio of microbubble and micropipette diameters (i.e., Qg/Ql and Db/Dp) was found.

scholarly journals Green Synthesis and Catalytic Activity of Silver Nanoparticles Based on Piper chaba Stem Extracts

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1777 ◽  
Author(s):  
Md. Mahiuddin ◽  
Prianka Saha ◽  
Bungo Ochiai
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Ftir Spectroscopy ◽  
Visual Observation ◽  
Face Centered Cubic ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Face Centered ◽  
Average Size

A green synthesis of silver nanoparticles (AgNPs) was conducted using the stem extract of Piper chaba, which is a plant abundantly growing in South and Southeast Asia. The synthesis was carried out at different reaction conditions, i.e., reaction temperature, concentrations of the extract and silver nitrate, reaction time, and pH. The synthesized AgNPs were characterized by visual observation, ultraviolet–visible (UV-vis) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), energy dispersive x-ray (EDX), and Fourier transform infrared (FTIR) spectroscopy. The characterization results revealed that AgNPs were uniformly dispersed and exhibited a moderate size distribution. They were mostly spherical crystals with face-centered cubic structures and an average size of 19 nm. The FTIR spectroscopy and DLS analysis indicated that the phytochemicals capping the surface of AgNPs stabilize the dispersion through anionic repulsion. The synthesized AgNPs effectively catalyzed the reduction of 4-nitrophenol (4-NP) and degradation of methylene blue (MB) in the presence of sodium borohydride.

scholarly journals STARCH MEDIATED SYNTHESIS OF HYDROXYAPATITE NANOPARTICLE FOR BIOMEDICAL APPLICATIONS

2015 ◽  
Vol 2 (1) ◽  
pp. 15-17
Author(s):  
Indira J
Keyword(s):  
Biomedical Applications ◽  
Soluble Starch ◽  
Morphological Properties ◽  
Spherical Nanoparticles ◽  
Hydroxyapatite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Average Size ◽  
Controllable Size

Hydroxyapatite (HAP) nanoparticles with uniform morphologies and controllable size have been synthesized by template directed method. The environment and eco-friendly polysaccharide soluble starch is used as a template to regulate size and shape of the nanoparticles synthesized. Structural and morphological properties of as-synthesized hydroxyapatite nanoparticles have been examined through the techniques like Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD) and Scanning Electron Microscopy(SEM), respectively. The results indicate that the obtained particles are uniform discrete spherical nanoparticles. The average size of the hydroxyapatite nanoparticles were ranged from 45 to 60 nm.

scholarly journals Bio Synthesis and Characterization of Silver Nanoparticles Using Lagenaria siceraria Leaf Extract and their Antibacterial Activity

2014 ◽  
Vol 38 ◽  
pp. 35-45 ◽  
Author(s):  
B. Anandh ◽  
A. Muthuvel ◽  
M. Emayavaramban
Keyword(s):  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Face Centered Cubic ◽  
Lagenaria Siceraria ◽  
Human Pathogens ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Ft Ir ◽  
Uv Visible

The present investigation demonstrates the formation of silver nanoparticles by the reduction of the aqueous silver metal ions during exposure to the Lagenaria siceraria leaf extract. The synthesized AgNPs have characterized by UV-visible spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) techniques. AgNPs formation has screened by UV-visible spectroscopy through colour conversion due to surface plasma resonance band at 427 nm. X-ray diffraction (XRD) confirmed that the resulting AgNPs are highly crystalline and the structure is face centered cubic (fcc). FT-IR spectrum indicates the presence of different functional groups present in the biomolecules capping the nanoparticles. Further, inhibitory activity of AgNPs and leaf extract were tested against human pathogens like gram-pastive (Staphylococcus aureus, Bacillus subtilis), gram-negative (Escherichia coli and Pseudomonas aeruginosa). The results indicated that the AgNPs showed moderate inhibitory actions against human pathogens than Lagenaria siceraria leaf extract, demonstrating its antimicrobial value against pathogenic diseases

scholarly journals Fast X-Ray Diffraction (XRD) Tomography for Enhanced Identification of Materials

2021 ◽  
Author(s):  
Airidas Korolkovas ◽  
Alexander Katsevich ◽  
Michael Frenkel ◽  
William Thompson ◽  
Edward Morton
Keyword(s):  
Graphics Processing Unit ◽  
Low Cost ◽  
Photon Counting ◽  
Finite Size ◽  
Processing Unit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Specific Material ◽  
Xrd Patterns ◽  
Graphics Processing

X-ray computed tomography (CT) can provide 3D images of density, and possibly the atomic number, for large objects like passenger luggage. This information, while generally very useful, is often insufficient to identify threats like explosives and narcotics, which can have a similar average composition as benign everyday materials such as plastics, glass, light metals, etc. A much more specific material signature can be measured with X-ray diffraction (XRD). Unfortunately, XRD signal is very faint compared to the transmitted one, and also challenging to reconstruct for objects larger than a small laboratory sample. In this article we analyze a novel low-cost scanner design which captures CT and XRD signals simultaneously, and uses the least possible collimation to maximize the flux. To simulate a realistic instrument, we derive a formula for the resolution of any diffraction pathway, taking into account the polychromatic spectrum, and the finite size of the source, detector, and each voxel. We then show how to reconstruct XRD patterns from a large phantom with multiple diffracting objects. Our approach includes a reasonable amount of photon counting noise (Poisson statistics), as well as measurement bias, in particular incoherent Compton scattering. The resolution of our reconstruction is sufficient to provide significantly more information than standard CT, thus increasing the accuracy of threat detection. Our theoretical model is implemented in GPU (Graphics Processing Unit) accelerated software which can be used to assess and further optimize scanner designs for specific applications in security, healthcare, and manufacturing quality control.

scholarly journals The Bio-fabrication of Gold Nanoparticles (AuNPs) by Green Method and Study of its Electrochemical Applications

2020 ◽  
Vol 1 (4) ◽  
pp. 22-25
Author(s):  
Azwan Morni
Keyword(s):  
Gold Nanoparticles ◽  
Ir Spectroscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Green Method ◽  
Oh Groups ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This study reports a green method for the synthesis of gold nanoparticles (AuNPs) using the aqueous extract of Salix aegyptiaca extract. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Novel methods of ideally synthesizing AuNPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. AuNPs were characterized with different techniques such as UV–vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and TEM. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary carbonyl group, -OH groups and other stabilizing functional groups. TEM experiments showed that these nanoparticles are formed with various shapes and X-ray diffraction pattern showed high purity and face centered cubic structure of AuNPs. For electrochemical properties of AuNPs, a modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated. The results show that electronic transmission rate between the modified electrode and [Fe (CN)6]3-/4- increased.

Sign in / Sign up

Export Citation Format

Share Document