scholarly journals Biosorption of Congo Red and Methylene Blue by pretreated waste Streptomyces fradiae biomass - Equilibrium, kinetic and thermodynamic studies

2018 ◽  
Vol 83 (1) ◽  
pp. 107-120 ◽  
Author(s):  
Zdravka Velkova ◽  
Gergana Kirova ◽  
Margarita Stoytcheva ◽  
Velizar Gochev
Keyword(s):  
Methylene Blue ◽  
Congo Red ◽  
Contact Time ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Streptomyces Fradiae ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Pretreated Biomass

Pretreated waste Streptomyces fradiae biomass was utilized as an eco-friendly sorbent for Congo Red (CR) and Methylene Blue (MB) removal from aqueous solutions. The biosorbent was characterized by Fourier transform infrared spectroscopy. Batch experiments were conducted to study the effect of pH, biosorbent dosage, initial concentration of adsorbates, contact time and temperature on the biosorption of the two dyes. The equilibrium adsorption data were analysed using Freundlich and Langmuir models. Both models fitted well the experimental data. The maximum biosorption capacity of the pretreated Streptomyces fradiae biomass was 46.64 mg g-1 for CR and 59.63 mg g-1 for MB, at a pH 6.0, with the contact time of 120 min, the biosorbent dosage of 2 g dm-3 and the temperature of 298 K. Lagergren and Ho kinetic models were used to analyse the kinetic data obtained from different batch experiments. The biosorption of both dyes followed better the pseudo-second order kinetic model. The calculated values for ?G, ?S, and ?H indicated that the biosorption of CR and MB onto the waste pretreated biomass was feasible, spontaneous, and exothermic in the selected temperature range and conditions.

scholarly journals Bagasse Fly Ash as an Effective Adsorbent: Evaluation of Adsorptive Characteristics for 4-Nitroaniline Removal

2021 ◽  
Vol 7 (05) ◽  
pp. 155-161
Author(s):  
Amarnath P.C & Shashikala K. J. Praveen Kumar D. G., Kalleshappa C.M.,
Keyword(s):  
Fly Ash ◽  
Contact Time ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Bagasse Fly Ash ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose ◽  
Maximum Removal

In the present study we explored the adsorptive characteristics of 4-nitroaniline from synthetic aqueous solution onto bagasse fly ash (BFA). Batch experiments were carried out to determine the influence of parameters like initial pH (pH0), adsorbent dose (m), contact time (t) and initial concentration (C0) on the removal of 4-nitroaniline. The maximum removal of 4-nitroaniline was determined to be 98% at lower concentrations (50 mg/L) and 41% at higher concentrations (300 mg/L), using a BFA dosage of 10 g/L at 303K. Kinetic study of 4-nitroaniline removal by BFA was well represented by pseudo second-order kinetic model. The 4-nitroaniline desorption from 4-nitroaniline loaded BFA shows that only 27% and 36% of 4-nitroaniline could be recovered using ethyl alcohol and acetone respectively.

Application of MnO2 Materials to Dye Removal from Aqueous Solution by Adsorption

2013 ◽  
Vol 361-363 ◽  
pp. 760-763 ◽  
Author(s):  
Wei Fang Dong ◽  
Li Hua Zang ◽  
Hao Li
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Dye Removal ◽  
Good Alternative ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The adsorption capacity was compared for the dye wastewater onto adsorbent MnO2. The effects of contact time and dosage of adsorbent were studied. The adsorption kinetics was analyzed. The results showed that MnO2 possessed higher adsorption capacity to Methylene blue than Methyl orange which the removal efficiency could reached 94.82%and 78.63% respectively under the conditions (the dosage1.2g/L, time 60min, initial dye concentration 50mg/L, pH7). The dynamical data fit well with the pseudo second order kinetic model. The MnO2 has higher Methylene blue adsorption capacity in short equilibrium times and are good alternative in wastewater treatment.

Adsorption of enrofloxacin from aqueous solution by bentonite

Clay Minerals ◽  
2013 ◽  
Vol 48 (4) ◽  
pp. 627-637 ◽  
Author(s):  
J. X. Zhang ◽  
Q. X. Zhou ◽  
W. Li
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Equilibrium ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Better Than

AbstractThe removal of enrofloxacin, a fluoroquinolone antibiotic, from aqueous solution by adsorption onto bentonite was investigated in this study. The effects of initial concentrations, contact time and temperature on the adsorption of enrofloxacin were studied via batch experiments. The adsorption equilibrium was achieved within 60 min for all studied concentrations. The adsorption capacity increased with the increase of initial concentration within a concentration range. Higher temperatures were favourable for the adsorption. The change of Gibbs free energy (ΔG°), change of enthalpy (ΔH°) and change of entropy (ΔS°) were evaluated and the results indicate that the adsorption should be an endothermic and spontaneous process. The Langmuir isotherm model fitted to the experimental data better than the Freundlich model. The adsorption follows the pseudo-second order kinetic model.

scholarly journals Removal of methylene blue by biosorption onto Stipa tenacissima L. (Alfa) plants: Kinetics, equilibrium and thermodynamic studies

2021 ◽  
pp. 33-44
Author(s):  
Samir Ladjali ◽  
Nadjib Dahdouh ◽  
Samira Amokrane ◽  
El Mekatel ◽  
Djamel Nibou
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Blue Dye ◽  
Order Kinetic ◽  
Liquid Ratio ◽  
Stipa Tenacissima ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid

This study examines the ability of Stipa tenacissima L. (Alfa) to biosorb the Methylene Blue dye. Biosorption tests were performed in aqueous solution based on certain essential parameters such as solution?s pH (2-12), solid/liquid ratio (1-6 g/L), initial dye concentration (25-125 mg/L) and contact time (0-300 min). The Langmuir, Freundlich, Temkin and Elovich models were applied. It was found that the equilibrium data could be fitted to the Langmuir isotherm for MB biosorption with a maximum capacity qmax 55, 95 mg/g. The kinetic study shows that the experimental data correspond to the pseudo-second order kinetic model. The negative Gibbs values free energy ?G? reveal the spontaneity of MB biosorption at the surface of Stipa tenacissima L. The positive value of ?H? reveals the endothermic nature of the process.

scholarly journals Mn(II) Ions Biosorption from Aqueous Solution Using Pleurotus Spent Mushroom Compost under Batch Experiment

2015 ◽  
Vol 773-774 ◽  
pp. 1101-1105 ◽  
Author(s):  
Ain Nihla Kamarudzaman ◽  
Tay Chia Chay ◽  
Amnorzahira Amir ◽  
Suhaimi Abdul Talib
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Contact Time ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Mushroom Compost ◽  
Spent Mushroom Compost ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The Pleurotus spent mushroom compost was selected as biosorbent to sorption Mn(II) ions. The Mn(II) ions biosorption was investigated under batch experiments. The influences of pH, contact time and initial Mn(II) concentration were also investigated. The optimum Mn(II) ions biosorption was achieved at pH 6, 20 minutes of contact time and 10 mg/L of initial Mn(II) concentration using 1.0 g biosorbent dosage. The Mn(II) ions biosorption experimental data were best described by the Langmuir isotherm model and pseudo-second order kinetic model. As conclusion, the Pleurotus spent mushroom compost can be used to sorption the Mn(II) ions from the aqueous solution.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Heterogeneous Fenton-Like Oxidation of Methylene Blue Using Alternative Catalysts

2021 ◽  
Vol 29 (48) ◽  
pp. 91-97
Author(s):  
Juraj Michálek ◽  
Kseniya Domnina ◽  
Veronika Kvorková ◽  
Kristína Šefčovičová ◽  
Klaudia Mončeková ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Methylene Blue ◽  
Low Cost ◽  
Hydrogen Peroxide Solution ◽  
Blue Dye ◽  
Order Kinetic ◽  
Heterogeneous Fenton ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Black Nickel

Abstract The usage of the low-cost catalysts for methylene blue removal from wastewater was investigated. Heterogeneous Fenton-like process consists of the use of a hydrogen peroxide solution, and an iron-rich catalyst, red mud and black nickel mud were used for that purpose. The factors such as the catalyst dose and the hydrogen peroxide solution volume were monitored. The results of experiments showed that the degradation of methylene blue dye in Fenton-like oxidation process using selected catalysts can be described by a pseudo-second-order kinetic model. The highest dye removal efficiency (87.15 %) was achieved using the black nickel mud catalyst after 30 minutes of reaction.

scholarly journals Adsorption of Cr(VI) ions onto goethite, activated carbon and their composite: kinetic and thermodynamic studies

2020 ◽  
Vol 10 (9) ◽  
Author(s):  
G. B. Adebayo ◽  
H. I. Adegoke ◽  
Sidiq Fauzeeyat
Keyword(s):  
Activated Carbon ◽  
Heavy Metal Contamination ◽  
Stem Bark ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Optimum Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Daniellia Oliveri ◽  
Kinetic And Thermodynamic Studies

Abstract Hexavalent chromium was adsorbed from aqueous solution with three prepared and characterized adsorbents, namely goethite (G), activated carbon (AC) and their composite (GAC). The goethite particle was synthesized using the precipitation methods, and activated carbon was prepared from the stem bark of Daniellia oliveri tree and composite in a ratio of 1:5 goethite–activated carbon. The adsorption capacities of G, AC and GAC for Cr(VI) are 6.627, 5.455 and 6.354 mg/g with 0.02 g adsorbent within contact time of 60, 180 and 30 min for G, AC and GAC, respectively, for Cr(VI) adsorption at optimum pH of 3. The isotherm studied was best explained by Langmuir adsorption isotherm and fitted with the pseudo-second-order kinetic model. Desorption studies showed that 1.0 M HNO3 was a better desorbing agent than 0.1 M HNO3, 0.1 M HCl and 1.0 M HCl. Chromium was most desorbed (94.60% in Cr//G using 1 M HNO3). The result obtained revealed that goethite and activated carbon produced are favourable adsorbents and the composite of the two adsorbents gives a more favourable, economical and affordable adsorbent for the clean-up of heavy metal contamination.

scholarly journals Preparation of chitosan/amine modified diatomite composites and adsorption properties of Hg(II) ions

2018 ◽  
Vol 77 (5) ◽  
pp. 1363-1371 ◽  
Author(s):  
Yong Fu ◽  
Yue Huang ◽  
Jianshe Hu ◽  
Zhengjie Zhang
Keyword(s):  
Schiff Base ◽  
Contact Time ◽  
Ph Value ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Modified Diatomite

Abstract A green functional adsorbent (CAD) was prepared by Schiff base reaction of chitosan and amino-modified diatomite. The morphology, structure and adsorption properties of the CAD were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and Brunauer Emmett Teller measurements. The effect of pH value, contact time and temperature on the adsorption of Hg(II) ions for the CAD is discussed in detail. The experimental results showed that the CAD had a large specific surface area and multifunctional groups such as amino, hydroxyl and Schiff base. The optimum adsorption effect was obtained when the pH value, temperature and contact time were 4, 25 °C and 120 min, respectively, and the corresponding maximum adsorption capacity of Hg(II) ions reached 102 mg/g. Moreover, the adsorption behavior of Hg(II) ions for the CAD followed the pseudo-second-order kinetic model and Langmuir model. The negative ΔG0 and ΔH0 suggested that the adsorption was a spontaneous exothermic process.

Sign in / Sign up

Export Citation Format

Share Document