scholarly journals Potentiometric cholesterol biosensing application of graphene electrode with stabilized polymeric lipid membrane

2013 ◽  
Vol 11 (9) ◽  
pp. 1554-1561 ◽  
Author(s):  
Georgia-Paraskevi Nikoleli ◽  
Zafar Ibupoto ◽  
Dimitrios Nikolelis ◽  
Vlassis Likodimos ◽  
Nikolas Psaroudakis ◽  
...  
Keyword(s):  
Lipid Membranes ◽  
Lipid Membrane ◽  
Cholesterol Oxidase ◽  
Biological Applications ◽  
Blood Samples ◽  
Graphene Electrode ◽  
Oxidase Enzyme ◽  
Polymerization Mixture ◽  
Linear Slope ◽  
Cholesterol Biosensor

AbstractAbstract A novel potentiometric cholesterol biosensor has been fabricated through the immobilization of the stabilized polymeric lipid membrane onto graphene electrode. The stabilized polymeric lipid membrane is composed of cholesterol oxidase enzyme and polymerization mixture; which holds paramount influence on the properties of the cholesterol biosensor. The presented biosensor reveals an appreciable reproducibility, good selectivity and high sensing capability with a linear slope curve of ∼64 mV per decade. The strong biocompatibility among stabilized polymeric lipid membranes and human biofluids provides the possibility to use for real blood samples and other biological applications. Graphical abstract

scholarly journals Nanotechnological advances of Lipid film-based biosensors for the rapid detection of biological compounds and toxicants

2019 ◽  
pp. 32-40
Author(s):  
Georgia-Paraskevi Nikoleli
Keyword(s):  
Lipid Membranes ◽  
Lipid Membrane ◽  
Cholesterol Oxidase ◽  
Environmental Pollutants ◽  
Clinical Analysis ◽  
Lipid Film ◽  
Biological Interest ◽  
Wide Range ◽  
Biological Compounds ◽  
Novel Devices

The exploration of lipid membranes for the construction of nanobiosensors has recently provided the opportunity to construct devices to monitor a wide range of compounds of biological interest. Nanobiosensor miniaturization using nanotechnological tools has given novel ways to attach a wide range of “receptors” in the lipid membrane. The lipids used to construct a lipid film-based device are dipalmiloylphosphatidylcholine {DPPC} and in some cases dipalmitoylphosphatidic acid (DPPA) which is an anionic lipid and is used to increase the sensitivity of detection. Most common “receptors” used in lipid film biosensors are enzymes such as urease, cholesterol oxidase, urecase, etc, antibodies such as D-dimer antibody and artificial or natural receptors such as saxitoxin, cholera toxin, calyx [4] arene phospjoryl receptor, etc. This chapter reviews and investigates the construction of nanobiosensors based on lipid membranes that are used to monitor various toxicants. It also exploits examples of applications with an emphasis on novel devices, new nanobiosensing techniques and nanotechnology-based transduction schemes. The compounds that can be detected are insecticides, toxins, hormones, dioxins, etc. Keywords: Lipid membrane based nanosensors; Nanoyechology; Graphene and ZnO electrodes; Food toxicants; Environmental pollutants; Clinical analysis

scholarly journals Nanotechnological advances of Lipid film based biosensors for the rapid detection of biological compounds and toxicants

2020 ◽  
pp. 27-35
Author(s):  
Georgia-Paraskevi Nikoleli ◽  
Keyword(s):  
Lipid Membranes ◽  
Rapid Detection ◽  
Lipid Membrane ◽  
Cholesterol Oxidase ◽  
Lipid Film ◽  
Biological Interest ◽  
Wide Range ◽  
Biological Compounds ◽  
Novel Devices ◽  
D Dimer

The exploration of lipid membranes for the construction of nanobiosensors has recently provided the opportunity to construct devices to monitor a wide range of compounds of biological interest. Nanobiosensor miniaturization using nanotechnological tools has given novel ways to attach a wide range of “receptors” in the lipid membrane. The lipids used to construct a lipid film based device are dipalmiloylphosphatidylcholine {DPPC} and in some cases dipalmitoylphosphatidic acid (DPPA) which is an anionic lipid and is used to increase the sensitivity of detection. Most common “receptors” used in lipid film biosensors are enzymes such as urease, cholesterol oxidase, urecase, etc, antibodies such as D-dimer antibody and artificial or natural receptors such as saxitoxin, cholera toxin, calyx[4]arene phospjoryl receptor, etc. This chapter reviews and investigates the construction of nanobiosensors based on lipid membranes that are used to monitor various toxicants. It also exploits examples of applications with an emphasis on novel devices, new nanobiosensing techniques and nanotechnology-based transduction schemes. The compounds that can be detected are insecticides, toxins, hormones, dioxins, etc.

Kinetic study of cholesterol oxidation by cholesterol oxidase enzyme as application for cholesterol biosensor

2019 ◽  
Author(s):  
Meka Saima Perdani ◽  
Muhamad Sahlan ◽  
Siti Farida ◽  
Dwini Normayulisa Putri ◽  
Sri Angky Soekanto ◽  
...  
Keyword(s):  
Kinetic Study ◽  
Cholesterol Oxidase ◽  
Cholesterol Oxidation ◽  
Oxidase Enzyme ◽  
Cholesterol Biosensor

scholarly journals Electrochemical Properties of Lipid Membranes Self-Assembled from Bicelles

Membranes ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 11
Author(s):  
Damian Dziubak ◽  
Kamil Strzelak ◽  
Slawomir Sek
Keyword(s):  
Electrochemical Properties ◽  
Self Assembly ◽  
Lipid Membranes ◽  
Lipid Membrane ◽  
Membrane Resistance ◽  
Electrochemical Characteristics ◽  
Freeze Thaw ◽  
Lipid Films ◽  
Supported Lipid Membranes

Supported lipid membranes are widely used platforms which serve as simplified models of cell membranes. Among numerous methods used for preparation of planar lipid films, self-assembly of bicelles appears to be promising strategy. Therefore, in this paper we have examined the mechanism of formation and the electrochemical properties of lipid films deposited onto thioglucose-modified gold electrodes from bicellar mixtures. It was found that adsorption of the bicelles occurs by replacement of interfacial water and it leads to formation of a double bilayer structure on the electrode surface. The resulting lipid assembly contains numerous defects and pinholes which affect the permeability of the membrane for ions and water. Significant improvement in morphology and electrochemical characteristics is achieved upon freeze–thaw treatment of the deposited membrane. The lipid assembly is rearranged to single bilayer configuration with locally occurring patches of the second bilayer, and the number of pinholes is substantially decreased. Electrochemical characterization of the lipid membrane after freeze–thaw treatment demonstrated that its permeability for ions and water is significantly reduced, which was manifested by the relatively high value of the membrane resistance.

scholarly journals Interactions of Linear Analogues of Battacin with Negatively Charged Lipid Membranes

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 192
Author(s):  
Kinga Burdach ◽  
Dagmara Tymecka ◽  
Aneta Urban ◽  
Robert Lasek ◽  
Dariusz Bartosik ◽  
...  
Keyword(s):  
Lipid Membranes ◽  
Liquid Crystalline ◽  
Lipid Membrane ◽  
Attenuated Total Reflection ◽  
Gram Positive ◽  
Insertion Depth ◽  
Force Microscopy ◽  
Acyl Chains ◽  
Hydrophobic Portion ◽  
Membrane Fluidization

The increasing resistance of bacteria to available antibiotics has stimulated the search for new antimicrobial compounds with less specific mechanisms of action. These include the ability to disrupt the structure of the cell membrane, which in turn leads to its damage. In this context, amphiphilic lipopeptides belong to the class of the compounds which may fulfill this requirement. In this paper, we describe two linear analogues of battacin with modified acyl chains to tune the balance between the hydrophilic and hydrophobic portion of lipopeptides. We demonstrate that both compounds display antimicrobial activity with the lowest values of minimum inhibitory concentrations found for Gram-positive pathogens. Therefore, their mechanism of action was evaluated on a molecular level using model lipid films mimicking the membrane of Gram-positive bacteria. The surface pressure measurements revealed that both lipopeptides show ability to bind and incorporate into the lipid monolayers, resulting in decreased ordering of lipids and membrane fluidization. Atomic force microscopy (AFM) imaging demonstrated that the exposure of the model bilayers to lipopeptides leads to a transition from the ordered gel phase to disordered liquid crystalline phase. This observation was confirmed by attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) results, which revealed that lipopeptide action causes a substantial increase in the average tilt angle of lipid acyl chains with respect to the surface normal to compensate for lipopeptide insertion into the membrane. Moreover, the peptide moieties in both molecules do not adopt any well-defined secondary structure upon binding with the lipid membrane. It was also observed that a small difference in the structure of a lipophilic chain, altering the balance between hydrophobic and hydrophilic portion of the molecules, results in different insertion depth of the active compounds.

scholarly journals An Electrochemical Cholesterol Biosensor Based on A CdTe/CdSe/ZnSe Quantum Dots—Poly (Propylene Imine) Dendrimer Nanocomposite Immobilisation Layer

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3368 ◽  
Author(s):  
Kefilwe Mokwebo ◽  
Oluwatobi Oluwafemi ◽  
Omotayo Arotiba
Keyword(s):  
Quantum Dots ◽  
Modified Electrode ◽  
Cholesterol Oxidase ◽  
Shell Growth ◽  
Modified Electrodes ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Poly Propylene ◽  
Cholesterol Biosensor

We report the preparation of poly (propylene imine) dendrimer (PPI) and CdTe/CdSe/ZnSe quantum dots (QDs) as a suitable platform for the development of an enzyme-based electrochemical cholesterol biosensor with enhanced analytical performance. The mercaptopropionic acid (MPA)-capped CdTe/CdSe/ZnSe QDs was synthesized in an aqueous phase and characterized using photoluminescence (PL) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), X-ray power diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy. The absorption and emission maxima of the QDs red shifted as the reaction time and shell growth increased, indicating the formation of CdTe/CdSe/ZnSe QDs. PPI was electrodeposited on a glassy carbon electrode followed by the deposition (by deep coating) attachment of the QDs onto the PPI dendrimer modified electrode using 1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC), and N-hydroxysuccinimide (NHS) as a coupling agent. The biosensor was prepared by incubating the PPI/QDs modified electrode into a solution of cholesterol oxidase (ChOx) for 6 h. The modified electrodes were characterized by voltammetry and impedance spectroscopy. Since efficient electron transfer process between the enzyme cholesterol oxidase (ChOx) and the PPI/QDs-modified electrode was achieved, the cholesterol biosensor (GCE/PPI/QDs/ChOx) was able to detect cholesterol in the range 0.1–10 mM with a detection limit (LOD) of 0.075 mM and sensitivity of 111.16 μA mM−1 cm−2. The biosensor was stable for over a month and had greater selectivity towards the cholesterol molecule.

scholarly journals The Structural Integrity of the Model Lipid Membrane during Induced Lipid Peroxidation: The Role of Flavonols in the Inhibition of Lipid Peroxidation

Antioxidants ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 430 ◽  
Author(s):  
Anja Sadžak ◽  
Janez Mravljak ◽  
Nadica Maltar-Strmečki ◽  
Zoran Arsov ◽  
Goran Baranović ◽  
...  
Keyword(s):  
Lipid Peroxidation ◽  
Lipid Bilayers ◽  
Lipid Membranes ◽  
Structural Changes ◽  
Structural Integrity ◽  
Lipid Membrane ◽  
Membrane Properties ◽  
Structural Reorganization ◽  
Unsaturated Lipids ◽  
Oxidative Attack

The structural integrity, elasticity, and fluidity of lipid membranes are critical for cellular activities such as communication between cells, exocytosis, and endocytosis. Unsaturated lipids, the main components of biological membranes, are particularly susceptible to the oxidative attack of reactive oxygen species. The peroxidation of unsaturated lipids, in our case 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), induces the structural reorganization of the membrane. We have employed a multi-technique approach to analyze typical properties of lipid bilayers, i.e., roughness, thickness, elasticity, and fluidity. We compared the alteration of the membrane properties upon initiated lipid peroxidation and examined the ability of flavonols, namely quercetin (QUE), myricetin (MCE), and myricitrin (MCI) at different molar fractions, to inhibit this change. Using Mass Spectrometry (MS) and Fourier Transform Infrared Spectroscopy (FTIR), we identified various carbonyl products and examined the extent of the reaction. From Atomic Force Microscopy (AFM), Force Spectroscopy (FS), Small Angle X-Ray Scattering (SAXS), and Electron Paramagnetic Resonance (EPR) experiments, we concluded that the membranes with inserted flavonols exhibit resistance against the structural changes induced by the oxidative attack, which is a finding with multiple biological implications. Our approach reveals the interplay between the flavonol molecular structure and the crucial membrane properties under oxidative attack and provides insight into the pathophysiology of cellular oxidative injury.

scholarly journals The interplay between lipids and dopamine on α-synuclein oligomerization and membrane binding

2013 ◽  
Vol 33 (5) ◽  
Author(s):  
Chi L. L. Pham ◽  
Roberto Cappai
Keyword(s):  
Lipid Membranes ◽  
Amyloid Fibrils ◽  
Lipid Membrane ◽  
Hydrophobic Interactions ◽  
Membrane Integrity ◽  
Lipid Vesicles ◽  
Helical Conformation ◽  
Unfolded Protein ◽  
Natively Unfolded Protein ◽  
Natively Unfolded

The deposition of α-syn (α-synuclein) as amyloid fibrils and the selective loss of DA (dopamine) containing neurons in the substantia nigra are two key features of PD (Parkinson's disease). α-syn is a natively unfolded protein and adopts an α-helical conformation upon binding to lipid membrane. Oligomeric species of α-syn have been proposed to be the pathogenic species associated with PD because they can bind lipid membranes and disrupt membrane integrity. DA is readily oxidized to generate reactive intermediates and ROS (reactive oxygen species) and in the presence of DA, α-syn form of SDS-resistant soluble oligomers. It is postulated that the formation of the α-syn:DA oligomers involves the cross-linking of DA-melanin with α-syn, via covalent linkage, hydrogen and hydrophobic interactions. We investigate the effect of lipids on DA-induced α-syn oligomerization and studied the ability of α-syn:DA oligomers to interact with lipids vesicles. Our results show that the interaction of α-syn with lipids inhibits the formation of DA-induced α-syn oligomers. Moreover, the α-syn:DA oligomer cannot interact with lipid vesicles or cause membrane permeability. Thus, the formation of α-syn:DA oligomers may alter the actions of α-syn which require membrane association, leading to disruption of its normal cellular function.

scholarly journals Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

2021 ◽  
Vol 14 (10) ◽  
pp. 1062
Author(s):  
Tomasz Róg ◽  
Mykhailo Girych ◽  
Alex Bunker
Keyword(s):  
Molecular Dynamics ◽  
Drug Design ◽  
Active Site ◽  
Lipid Membranes ◽  
Md Simulation ◽  
Lipid Membrane ◽  
Pharmaceutical Research ◽  
Specific Protein ◽  
Design Tool ◽  
Drug Molecules

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard “lock and key” paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

Self-Healing Bilayer Lipid Membranes Formed Over Synthetic Substrates

2008 ◽  
Author(s):  
M. Austin Creasy ◽  
Donald J. Leo
Keyword(s):  
Self Assembly ◽  
Lipid Membranes ◽  
Lipid Membrane ◽  
Bilayer Lipid Membrane ◽  
Unique Property ◽  
Bilayer Lipid Membranes ◽  
Self Healing ◽  
Electrical Field ◽  
Bilayer Lipid ◽  
Recent Experimental Study

Biological systems demonstrate autonomous healing of damage and are an inspiration for developing self-healing materials. Our recent experimental study has demonstrated that a bilayer lipid membrane (BLM), also called a black lipid membrane, has the ability to self-heal after mechanical failure. These molecules have a unique property that they spontaneously self assembly into organized structures in an aqueous medium. The BLM forms an impervious barrier to ions and fluid between two volumes and strength of the barrier is dependent on the pressure and electrical field applied to the membrane. A BLM formed over an aperture on a silicon substrate is shown to self-heal for 5 pressurization failure cycles.

Sign in / Sign up

Export Citation Format

Share Document