scholarly journals Decorating Cutting as New Approach to Machine Tool System Dynamics

2014 ◽  
Vol 11 (1) ◽  
pp. 43-46
Author(s):  
Zuzana Murcinkova ◽  
Karol Vasilko
Keyword(s):  
System Dynamics ◽  
Machine Tool ◽  
Cutting Force ◽  
Cutting Process ◽  
New Approach ◽  
Oil Film ◽  
Chatter Vibrations

Abstract The paper presents so called decorating cutting focused on turning. It uses self-excited vibrations that are typical for turning and other types of cutting operations. The decorating turning do not utilize setting of unstable technological conditions of cutting process but it actively use the acting of cutting force on machine tool without generation of unwanted chatter vibrations. The special tool fixture was developed to utilize self-excited vibrations invoked by periodical changeability of cutting force by cutting process itself. Thus the typical texture of surface appears. The various macro/micro-textures of surfaces can be applied either for decorating purpose or for better holding of oil film.

The Study of Cutting Forces About Dynamic Stability of Milling Machine Tools

2008 ◽  
Author(s):  
Petru A. Pop
Keyword(s):  
Machine Tool ◽  
Cutting Force ◽  
Dynamic Stability ◽  
Cutting Forces ◽  
Machine Tools ◽  
Cutting Process ◽  
Depth Of Cut ◽  
Milling Machine ◽  
Dynamic Tests ◽  
Machining System

The paper has presented a study of cutting forces about dynamic stability of milling machine tools. For that has required the analysis of dynamic machining system (DMS), represented by the interaction between elastic structure of machine tool and cutting process. The cutting force occurred during cutting process is dependent by a certain factors as thickness cut, physics-mechanics properties of workpiece, geometry of shaped edge tool, etc. An important factor, which has direct influenced about DMS, is present of vibration, in special at chatter frequency due to real perturbation and damages of DMS. The magnitude of cutting force depends largely on the tool-work engagement and depth of cut. The dynamic installation has used for study of milling cutting process assured the acquisition of vibration and cutting force on each three axes of milling machine tool. The calculus and interpretation of dynamic tests had done by MATLAB R14.v7.01 Program. Dynamic tests have been more that 150 recordings, by variation of cutting depth for each spindle speeds of machine until occurring chatter. It had used for testing four milling cutters with different geometric parameters and differential pitch of cutter. These dynamic tests are emphasizing the direct influences of cutting forces about dynamic machining system. Thus, by reducing, the magnitude of cutting forces due to suppressing the vibrations and implicit enhanced the dynamic stability of milling machine and quality of machining workpiece.

Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1

1965 ◽  
Vol 87 (4) ◽  
pp. 447-454 ◽  
Author(s):  
H. E. Merritt
Keyword(s):  
Machine Tool ◽  
Cutting Force ◽  
Degrees Of Freedom ◽  
Structural Characteristics ◽  
Dynamic Stiffness ◽  
Cutting Process ◽  
Design Stage ◽  
Structural Dynamic ◽  
Machine Tool Chatter ◽  
Tool Chatter

Self-excited chatter, an instability of the cutting process in combination with the machine structure, is a basic performance limitation of a machine tool. A theory is developed which permits calculation of borderlines of stability for a structure having n-degrees of freedom and assuming no dynamics in the cutting process. Harmonic solutions of the system characteristic equation are found using a special chart, and the resulting data are used to plot a stability chart. However, an infinite number of such stability charts exists for a given machine because the structure dynamics vary with cutting-force orientation. This fact makes a simpler index of chatter performance desirable. A simple stability criterion is proposed which states that the directional cutting stiffness must be less than one half the minimum directional dynamic stiffness of the structure for each force orientation to assure chatter-free performance at all spindle speeds. Thus chatter-free performance can be fundamentally identified with adequate structural dynamic stiffness for all cutting-force orientations. Such a broad requirement for dynamic stiffness is difficult to meet in the design stage since structural characteristics are not easily predicted and controlled. Machine testing with continual improvements in the structure to increase dynamic stiffness is currently the best way to combat chatter.

Determination of cutting force of roll-formed section in shaped dies-knife guillotine

2020 ◽  
pp. 373-376
Author(s):  
S.V. Povorov ◽  
D.V. Egorov ◽  
D.S. Volgin
Keyword(s):  
Cutting Force ◽  
Cutting Process ◽  
Sheet Blank

The change in cutting force in the cutting process of roll-formed section in shaped dies-knife guillotine is studied. It is established that to calculate the cutting force in shaped guillotine, one can use formulas to determine the cutting force of sheet blank on conventional straight knives guillotine.

Modelling of the Deburring Process

2006 ◽  
Vol 5-6 ◽  
pp. 367-374
Author(s):  
C. G. Dumitraş
Keyword(s):  
Central Composite Design ◽  
Cutting Force ◽  
Cutting Forces ◽  
Cutting Process ◽  
Central Composite ◽  
The Way

Due to robotic deburring development, the research gains a new orientation and focused on the cutting forces and the chip control. The present paper will emphasize the main difference which occurs between the normal cutting process and the deburring process, the way it develops and the parameters which characterize this process. Also the dynamics of the process are considered. Based on a central composite design one determine a relation between the geometry of the tool, workpiece hardness and cutting force.

Molecular Dynamics Study on the Impact of the Cutting Depth to the Titanium Nanometric Cutting

2014 ◽  
Vol 536-537 ◽  
pp. 1431-1434 ◽  
Author(s):  
Ying Zhu ◽  
Yin Cheng Zhang ◽  
Shun He Qi ◽  
Zhi Xiang
Keyword(s):  
Molecular Dynamics ◽  
Potential Energy ◽  
Cutting Force ◽  
Simulation Study ◽  
Cutting Process ◽  
Work Piece ◽  
Cutting Depth ◽  
Nanometric Cutting ◽  
The Impact

Based on the molecular dynamics (MD) theory, in this article, we made a simulation study on titanium nanometric cutting process at different cutting depths, and analyzed the changes of the cutting depth to the effects on the work piece morphology, system potential energy, cutting force and work piece temperature in this titanium nanometric cutting process. The results show that with the increase of the cutting depth, system potential energy, cutting force and work piece temperature will increase correspondingly while the surface quality of machined work piece will decrease.

Simulation of Meso-Scale Machining of AISI1045 Based on Multiphase Model

2016 ◽  
Vol 836-837 ◽  
pp. 374-380
Author(s):  
Teng Yi Shang ◽  
Li Jing Xie ◽  
Xiao Lei Chen ◽  
Yu Qin ◽  
Tie Fu
Keyword(s):  
Cutting Force ◽  
Cutting Process ◽  
Multiphase Model ◽  
Tool Edge Radius ◽  
Edge Radius ◽  
Tool Edge ◽  
Cutting Insert ◽  
Multiphase Models ◽  
Hot Rolled ◽  
Meso Scale

In the meso-scale machining, feed rate, grain size and tool edge radius are in the same order of magnitude, and cutting process is often carried out in the grain interior and grain boundary. In this paper the meso-cutting process of hot-rolled AISI1045 steel is studied and its metallographic microstructure is analyzed for the establishment of multiphase models which incorporate the effect of ferrite and pearlite grains. In order to discover the applicability of multiphase models to the simulation of meso-cutting, three contrast simulation models including multiphase model with rounded-edge cutting insert (model I), multiphase model with sharp edge cutting insert (model II) and equivalent homogeneous material model with rounded-edge cutting insert (model III) are built up for the meso-orthogonal cutting processes of hot-rolled AISI1045. By comparison with the experiments in terms of chip morphology, cutting force and specific cutting force, the most suitable model is identified. Then the stress distiribution is analyzed. And it is found that multiphase model with tool edge radius can give a more accurate prediction of the global variables and reveal more about these important local variables distribution.

On the Development of a Tangential Clamped-On Chipbreaker for Difficult-to-Machine Materials

1999 ◽  
Author(s):  
Armen L. Airikyan
Keyword(s):  
Cutting Force ◽  
Process Planning ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Cutting Edge ◽  
Cutting Process ◽  
Everyday Practice ◽  
Application Problem ◽  
New Type ◽  
Design And Application

Abstract Everyday practice of cutting process planning requires reliable chipbreacking and this is particularly true when machining difficult-ti-machine materials as austenitic stainless steels. The use of pressed-groove type of chipbreakers prove to provide a partly solution of the problem since their utilization unavoidably leads to increasing cutting force and chipping of the cutting edge. The use of clapped-on chipbreaker seems to solve these problems. However new design and application problem arise. This paper deals with the analysis of these problema and offers a methodology for it resolving. As a result, a new type of a clamped-on chipbreaker has been developed.

Research of machining forces and technological features of cast PA6, POM C and UHMW-PE HD 1000

2010 ◽  
Vol 1 (1) ◽  
pp. 136-143
Author(s):  
Robert Keresztes ◽  
Gabor Kalacska
Keyword(s):  
Injection Molding ◽  
Cutting Force ◽  
Mechanical Engineering ◽  
Cutting Process ◽  
Engineering Practice ◽  
Serial Production ◽  
Machining Forces ◽  
Engineering Plastics ◽  
Machine Elements ◽  
Cutting Processes

Nowadays parts made of up-to-date engineering plastics are used more and morein mechanical engineering practice. These machine-elements are produced most frequentlyby injection molding or by one cutting process. The injection molding technology are usedgenerally for great number of pieces, in case of serial production while cutting processes arepreferred to piece (unit) or smaller number production.We used lathe and measured the main- and feeding-directional cutting force at differentengineering polymers (cast PA6, POM C and UHMW PE HD 1000). The analysis made canbe well used in practice.

A New Approach to the Early Prediction of Turning Chatter

1994 ◽  
Vol 116 (4) ◽  
pp. 485-488 ◽  
Author(s):  
Shan-Fei Bao ◽  
Wen-Guo Zhang ◽  
Jun-Yi Yu ◽  
Si-Mao Qiao ◽  
Fu-Lun Yang
Keyword(s):  
Theoretical Analysis ◽  
Cutting Force ◽  
Frequency Difference ◽  
Early Prediction ◽  
New Approach ◽  
Dynamic Cutting Force

A new approach to the early prediction of turning chatter is described in this paper; the interval frequency difference H in the amplitude domain of the dynamic cutting force is taken as a prediction parameter. The theoretical analysis and experiments results indicate that the approach presented can lead to a quick prediction of turning chatter with higher accuracy and adaptability.

Sign in / Sign up

Export Citation Format

Share Document