scholarly journals Extension and slip rate partitioning in NW Iran constrained by GPS measurements

2011 ◽  
Vol 1 (4) ◽  
pp. 286-304 ◽  
Author(s):  
A. Rastbood ◽  
B. Voosoghi
Keyword(s):  
Large Scale ◽  
Slip Rate ◽  
Strike Slip ◽  
Fault System ◽  
Arabian Plate ◽  
Normal Faults ◽  
Gps Data ◽  
Gps Measurements ◽  
Nw Iran ◽  
Himalayan Mountain

Extension and slip rate partitioning in NW Iran constrained by GPS measurementsConvergence of 22±2 mm yr-1 between the northward motion of the Arabian Plate relative to Eurasia at N8° ±5° E is accommodated by a combination of thrust and strike-slip faults in different parts of Iran. Dislocation modeling is used to examine the GPS data for this part of the Alpine-Himalayan mountain belt with more concentration in NW Iran. First, the vectors due to known Arabia-Eurasia rotation are reproduced by introducing structures that approximate the large-scale tectonics of the Middle East. Observed features of the smaller scale fault system are then progressively included in the model. Slip rate amplitudes and directions adjusted to fit available GPS data. Geological evidences show strike-slip and reverse-slip faulting in NW Iran, but GPS data show normal faults in this region too. By slip partitioning we propose four locations for normal faults based on extensions observed by GPS data. Slip rate values were estimated between 2 ~ 5 mm/yr for proposed normal faults. Our modeling results prove that the NW Iran is not only affected by Arabia-Eurasia collision but also contributes in the subduction motion of the South Caspian and Kura basins basement beneath the Apsheron-Balkhan sill and the Great Caucasus respectively.

Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides

2021 ◽  
Author(s):  
Nemanja Krstekanic ◽  
Liviu Matenco ◽  
Uros Stojadinovic ◽  
Ernst Willingshofer ◽  
Marinko Toljić ◽  
...  
Keyword(s):  
Large Scale ◽  
Strike Slip ◽  
Fault System ◽  
Normal Faults ◽  
Strain Partitioning ◽  
The South ◽  
The Carpathians ◽  
The North ◽  
Moesian Platform ◽  
Parallel Extension

<p>The Carpatho-Balkanides of south-eastern Europe is a double 180° curved orogenic system. It is comprised of a foreland-convex orocline, situated in the north and east and a backarc-convex orocline situated in the south and west. The southern orocline of the Carpatho-Balkanides orogen formed during the Cretaceous closure of the Alpine Tethys Ocean and collision of the Dacia mega-unit with the Moesian Platform. Following the main orogen-building processes, the Carpathians subduction and Miocene slab retreat in the West and East Carpathians have driven the formation of the backarc-convex oroclinal bending in the south and west. The orocline formed during clockwise rotation of the Dacia mega-unit and coeval docking against the Moesian indenter. This oroclinal bending was associated with a Paleocene-Eocene orogen-parallel extension that exhumed the Danubian nappes of the South Carpathians and with a large late Oligocene – middle Miocene Circum-Moesian fault system that affected the orogenic system surrounding the Moesian Platform along its southern, western and northern margins. This fault system is composed of various segments that have different and contrasting types of kinematics, which often formed coevally, indicating a large degree of strain partitioning during oroclinal bending. It includes the curved Cerna and Timok faults that cumulate up to 100 km of dextral offset, the lower offset Sokobanja-Zvonce and Rtanj-Pirot dextral strike-slip faults, associated with orogen parallel extension that controls numerous intra-montane basins and thrusting of the western Balkans units over the Moesian Platform. We have performed a field structural study in order to understand the mechanisms of deformation transfer and strain partitioning around the Moesian indenter during oroclinal bending by focusing on kinematics and geometry of large-scale faults within the Circum-Moesian fault system.</p><p>Our structural analysis shows that the major strike-slip faults are composed of multi-strand geometries associated with significant strain partitioning within tens to hundreds of metres wide deformation zones. Kinematics of the Circum-Moesian fault system changes from transtensional in the north, where the formation of numerous basins is controlled by the Cerna or Timok faults, to strike-slip and transpression in the south, where transcurrent offsets are gradually transferred to thrusting in the Balkanides. The characteristic feature of the whole system is splaying of major faults to facilitate movements around the Moesian indenter. Splaying towards the east connects the Circum-Moesian fault system with deformation observed in the Getic Depression in front of the South Carpathians, while in the south-west the Sokobanja-Zvonce and Rtanj-Pirot faults splay off the Timok Fault. These two faults are connected by coeval E-W oriented normal faults that control several intra-montane basins and accommodate orogen-parallel extension. We infer that all these deformations are driven by the roll-back of the Carpathians slab that exerts a northward pull on the upper Dacia plate in the Serbian Carpathians. However, the variability in deformation styles is controlled by geometry of the Moesian indenter and the distance to Moesia, as the rotation and northward displacements increase gradually to the north and west.</p>

Interseismic Deformation in the Gulf of Aqaba Inferred from GPS Measurements

2020 ◽  
Author(s):  
Nicolas Castro-Perdomo ◽  
Renier Viltres ◽  
Frédéric Masson ◽  
Patrice Ulrich ◽  
Jean-Daniel Bernard ◽  
...  
Keyword(s):  
Large Scale ◽  
Slip Rate ◽  
Fault System ◽  
Arabian Plate ◽  
Gulf Of Aqaba ◽  
Postseismic Deformation ◽  
Euler Pole ◽  
Finite Fault ◽  
Starting Point ◽  
Interseismic Deformation

<p>The Dead Sea Transform fault forms the boundary between the Arabian plate and the Sinai-Levant subplate. Several aspects of this fault system have been extensively studied during the last century. However, the present-day kinematics and deformation along its southern end in the Gulf of Aqaba remain poorly understood. Here we present a crustal motion velocity field based on three GPS surveys conducted between 2015 and 2019 at 30 campaign sites, complemented by 12 permanent stations operating near the gulf. We constrained a pole of rotation for the Sinai-Levant subplate based on five selected stations on the Sinai Peninsula. This Euler pole predicts a left-lateral slip rate of ~4.5 mm/yr on the fault system in the gulf, consistent with earlier findings. We find that standard models of interseismic deformation, such as back-slip and screw dislocation models do not provide a reasonable constraint on fault locking depths due to limited near-fault measurements. Despite this, our results reveal a small (~1 mm/yr) but systematic left-lateral residual motion across the gulf that cannot be resolved by elastic models of strain accumulation. We further find that the orientation of these residuals agrees with modelled postseismic transient motions caused by the 1995 M<sub>W</sub> 7.2 Nuweiba earthquake in the NE and SW quadrants relative to the gulf trend. Combined, these observations suggest that postseismic deformation caused by the Nuweiba earthquake may still be ongoing. We anticipate our findings to be a starting point for future geodetic studies in the northern Red Sea region where large-scale infrastructure mega-projects, such as the NEOM city and the King Salman bridge across the gulf are being developed. Future studies would benefit from incorporating additional GPS stations on the Sinai side of the gulf, refined finite-fault models, seafloor geodetic measurements and better information about past earthquakes.</p>

Late Pleistocene extension and strike-slip in the Dead Sea Basin

2004 ◽  
Vol 141 (5) ◽  
pp. 565-572 ◽  
Author(s):  
YUVAL BARTOV ◽  
AMIR SAGY
Keyword(s):  
Internal Structure ◽  
Slip Rate ◽  
Dead Sea ◽  
Strike Slip ◽  
Normal Faults ◽  
Small Scale ◽  
Dead Sea Basin ◽  
Pull Apart Basin ◽  
Western Border ◽  
The Dead

A newly discovered active small-scale pull-apart (Mor structure), located in the western part of the Dead Sea Basin, shows recent basin-parallel extension and strike-slip faulting, and offers a rare view of pull-apart internal structure. The Mor structure is bounded by N–S-trending strike-slip faults, and cross-cut by low-angle, E–W-trending normal faults. The geometry of this pull-apart suggests that displacement between the two stepped N–S strike-slip faults of the Mor structure is transferred by the extension associated with the normal faults. The continuing deformation in this structure is evident by the observation of at least three deformation episodes between 50 ka and present. The calculated sinistral slip-rate is 3.5 mm/yr over the last 30 000 years. This slip rate indicates that the Mor structure overlies the currently most active strike-slip fault within the western border of the Dead Sea pull-apart. The Mor structure is an example of a small pull-apart basin developed within a larger pull-apart. This type of hierarchy in pull-apart structures is an indication for their ongoing evolution.

Numerical simulation of structural growth in the Lebanese restraining bends, Dead Sea fault system

2021 ◽  
Author(s):  
Jakub Fedorik ◽  
Francesco E. Maesano ◽  
Abdulkader M. Alafifi
Keyword(s):  
Numerical Simulation ◽  
Lateral Displacement ◽  
Dead Sea ◽  
Geometrical Model ◽  
Experimental Models ◽  
Strike Slip ◽  
Boundary Element Methods ◽  
Fault System ◽  
Arabian Plate ◽  
Restraining Bend

<p>Strike-slip structures are rarely validated because commonly used 2D restoration techniques are not applicable. Here we present the results of 3D numerical simulation of the restraining bends in Lebanon using boundary element methods of fault deformation implemented in MOVE™. The Lebanon restraining bend is the largest transpressional feature along the Dead Sea Transform (DST), and consists of two mountain ranges: Mount Lebanon on the west, dominated by the active Yammouneh fault, and the Anti-Lebanon Range to the east, influenced by the Serghaya and other faults. We built a new 3D geometrical model of the fault surfaces based on previous mapping of faults onshore and offshore Lebanon, complemented by interpretation of satellite images and DEM, and analogy with experimental models of restraining bend or transpressional structures. The model was simulated in response to the regional stress produced by the left-lateral displacement of the Arabian plate. The simulation accurately predicted the shape and magnitude of positive and negative topographic changes and faults slip directions throughout Lebanon. Furthermore, this simulation supports the hypothesis that the formation of the Anti-Lebanon Range was influenced by the intersection of the DST with the older Palmyrides belt, resulting in failed restraining bend. In contrast, the structure of Mt. Lebanon is similar to laboratory experiments of a restraining bend without inheritance. In addition, our simulation presents an approach of how strike-slip structural models may be validated in areas where subsurface data are limited.</p>

scholarly journals Methodology for Earthquake Rupture Rate estimates of fault networks: example for the Western Corinth Rift, Greece

2017 ◽  
Author(s):  
Thomas Chartier ◽  
Oona Scotti ◽  
Hélène Lyon-Caen ◽  
Aurélien Boiselet
Keyword(s):  
Active Faults ◽  
Slip Rate ◽  
Seismic Hazard Assessment ◽  
System Level ◽  
Fault System ◽  
Normal Faults ◽  
Accurate Estimation ◽  
Probabilistic Seismic Hazard Assessment ◽  
Earthquake Rupture ◽  
Multiple Faults

Abstract. Modelling the seismic potential of active faults is a fundamental step of probabilistic seismic hazard assessment (PSHA). An accurate estimation of the rate of earthquakes on the faults is necessary in order to obtain the probability of exceedance of a given ground motion. Most PSHA studies consider faults as independent structures and neglect the possibility of multiple faults or fault segments rupturing simultaneously (Fault to Fault -FtF- ruptures). The latest Californian model (UCERF-3) takes into account this possibility by considering a system level approach rather than an individual fault level approach using the geological , seismological and geodetical information to invert the earthquake rates. In many places of the world seismological and geodetical information long fault networks are often not well constrained. There is therefore a need to propose a methodology relying only on geological information to compute earthquake rate of the faults in the network. In this methodology, similarly to UCERF-3, a simple distance criteria is used to define FtF ruptures and consider single faults or FtF ruptures as an aleatory uncertainty. Rates of earthquakes on faults are then computed following two constraints: the magnitude frequency distribution (MFD) of earthquakes in the fault system as a whole must follow an imposed shape and the rate of earthquakes on each fault is determined by the specific slip-rate of each segment depending on the possible FtF ruptures. The modelled earthquake rates are then confronted to the available independent data (geodetical, seismological and paleoseismological data) in order to weigh different hypothesis explored in a logic tree. The methodology is tested on the Western Corinth Rift, Greece (WCR) where recent advancements have been made in the understanding of the geological slip rates of the complex network of normal faults which are accommodating the ~15 mm/yr North-South extension. Modelling results show that geological, seismological extension rates and paleoseismological rates of earthquakes cannot be reconciled with only single fault rupture scenarios and require hypothesising a large spectrum of possible FtF rupture sets. Furthermore, in order to fit the imposed regional Gutenberg-Richter MFD target, some of the slip along certain faults needs to be accommodated either with interseismic creep or as post-seismic processes. Furthermore, individual fault’s MFDs differ depending on the position of each fault in the system and the possible FtF ruptures associated with the fault. Finally, a comparison of modelled earthquake rupture rates with those deduced from the regional and local earthquake catalogue statistics and local paleosismological data indicates a better fit with the FtF rupture set constructed with a distance criteria based on a 5 km rather than 3 km, suggesting, a high connectivity of faults in the WCR fault system.

scholarly journals Triple junction kinematics accounts for the 2016 Mw7.8 Kaikoura earthquake rupture complexity

2019 ◽  
Vol 116 (52) ◽  
pp. 26367-26375 ◽  
Author(s):  
Xuhua Shi ◽  
Paul Tapponnier ◽  
Teng Wang ◽  
Shengji Wei ◽  
Yu Wang ◽  
...  
Keyword(s):  
New Zealand ◽  
Triple Junction ◽  
Large Scale ◽  
Strike Slip ◽  
Plate Motion ◽  
Fault System ◽  
Coseismic Deformation ◽  
Coseismic Slip ◽  
Slab Geometry ◽  
Kaikoura Earthquake

The 2016, moment magnitude (Mw) 7.8, Kaikoura earthquake generated the most complex surface ruptures ever observed. Although likely linked with kinematic changes in central New Zealand, the driving mechanisms of such complexity remain unclear. Here, we propose an interpretation accounting for the most puzzling aspects of the 2016 rupture. We examine the partitioning of plate motion and coseismic slip during the 2016 event in and around Kaikoura and the large-scale fault kinematics, volcanism, seismicity, and slab geometry in the broader Tonga–Kermadec region. We find that the plate motion partitioning near Kaikoura is comparable to the coseismic partitioning between strike-slip motion on the Kekerengu fault and subperpendicular thrusting along the offshore West–Hikurangi megathrust. Together with measured slip rates and paleoseismological results along the Hope, Kekerengu, and Wairarapa faults, this observation suggests that the West–Hikurangi thrust and Kekerengu faults bound the southernmost tip of the Tonga–Kermadec sliver plate. The narrow region, around Kaikoura, where the 3 fastest-slipping faults of New Zealand meet, thus hosts a fault–fault–trench (FFT) triple junction, which accounts for the particularly convoluted 2016 coseismic deformation. That triple junction appears to have migrated southward since the birth of the sliver plate (around 5 to 7 million years ago). This likely drove southward stepping of strike-slip shear within the Marlborough fault system and propagation of volcanism in the North Island. Hence, on a multimillennial time scale, the apparently distributed faulting across southern New Zealand may reflect classic plate-tectonic triple-junction migration rather than diffuse deformation of the continental lithosphere.

Quantifying fault reactivation risk in the western Gippsland Basin using geomechanical modelling

2013 ◽  
Vol 53 (1) ◽  
pp. 255 ◽  
Author(s):  
Ernest Swierczek ◽  
Cui Zhen-dong ◽  
Simon Holford ◽  
Guillaume Backe ◽  
Rosalind King ◽  
...  
Keyword(s):  
Structural Model ◽  
Strike Slip ◽  
Fault Reactivation ◽  
Fault System ◽  
Co2 Injection ◽  
Normal Faults ◽  
Surface Geometry ◽  
Northern Margin ◽  
Fault Surface ◽  
Gippsland Basin

The Rosedale Fault System (RFS) bounds the northern margin of the Gippsland Basin on the Southern Australian Margin. It comprises an anastomosing system of large, Cretaceous-age normal faults that have been variably reactivated during mid Eocene-Recent inversion. A number of large oil and gas fields are located in anticlinal traps associated with the RFS, and in the future these fields may be considered as potential storage sites for captured CO2. Given the evidence for geologically recent fault reactivation along the RFS, it is thus necessary to evaluate the potential impacts of CO2 injection on fault stability. The analysis and interpretation of 3D seismic data allowed the authors to create a detailed structural model of the western section of the RFS. Petroleum geomechanical data indicates that the in-situ stress in this region is characterised by hybrid strike-slip to reverse faulting conditions where SHmax (40.5 MPa/km) > SV (21 MPa/km) ~ Shmin (20 MPa/km). The authors performed geomechanical modelling to assess the likelihood of fault reactivation assuming that both strike-slip and reverse-stress faulting regimes exist in the study area. The authors’ results indicate that the northwest to southeast and east-northeast to west-southwest trending segments of the RFS are presently at moderate and high risks of reactivation. The authors’ results highlight the importance of fault surface geometry in influencing fault reactivation potential, and show that detailed structural models of potential storage sites must be developed to aid risk assessments before injection of CO2.

Partitioning between strike-slip and orthogonal extension in the western South China Sea

2020 ◽  
Author(s):  
Pan Luo ◽  
Jianye Ren ◽  
Xi He ◽  
Chao Lei ◽  
Junjie Xu ◽  
...  
Keyword(s):  
South China Sea ◽  
Continental Crust ◽  
South China ◽  
Large Scale ◽  
Strike Slip ◽  
Fault System ◽  
Relative Role ◽  
China Sea ◽  
Kinematic Evolution ◽  
Mantle Exhumation

<p>Our study focuses on the Zhongjianna (ZJN) (Phu Kham) Basin, located at the western termination of the South China Sea (SCS) and separated from the Indochina continent by the N-S striking East Vietnam Boundary Fault Zone, which is a large scale strike-slip fault system. The sedimentary infill history of the ZJN basin records the complete evolution and interaction of the Indochina-SCS system and allows the tectonic and kinematic evolution of the basin to be understood.. The discovery of hyper-extended continental crust and mantle exhumation in this basin leads to the question of what is the relative role of large-scale strike-slip and orthogonal faulting in controlling crustal thinning in the ZJN basin.  </p><p>  Our preliminary results confirm the existence of hyperextended continental crust flooring the ZJN basin. Two different types of structures can be identified in this area: extension related deformation in the eastern part and strike-slip related deformation in the western part. The analysis of fault geometries and kinematics linked to timing and subsidence rates suggest that the N-S-orientated strike-slip structures dominated the continental shelf and slope area on the west side of the basin. In the basin, however, most faults strike NE-SW and are parallel to the mid-ocean ridge. Thus, it appears that the ZJN basin resulted from the partitioning between strike-slip and orthogonal extension.</p><p>In our presentation we show the results of our seismic interpretation, strain and subsidence analysis and discuss the interaction between strike-slip and orthogonal extension in setting up the hyper-extended ZJN basin and its implications for the large scale tectonic and geodynamic framework.</p>

The effects of strike-slip motion along the Cobequid - Chedabucto - southwest Grand Banks fault system on the Cretaceous-Tertiary evolution of Atlantic Canada

2004 ◽  
Vol 41 (7) ◽  
pp. 799-808 ◽  
Author(s):  
Georgia Pe-Piper ◽  
David J.W Piper
Keyword(s):  
Late Cretaceous ◽  
Fracture Zone ◽  
Large Scale ◽  
Strike Slip ◽  
Fault System ◽  
Grand Banks ◽  
Tectonic Model ◽  
Geological Features ◽  
Cretaceous Volcanism ◽  
Slip Motion

The Newfoundland Fracture Zone, the southwest Grand Banks transform, and the Cobequid–Chedabucto fault zone form a linked strike-slip fault system from the Atlantic Ocean to southeastern Canada. This paper suggests that several large-scale geological features in southeastern Canada are the result of a small amount of strike-slip motion on the system during the mid Cretaceous and Oligocene. Regional extension features developed in the releasing bend in the Laurentian sub-basin during the mid Cretaceous, but the same area experienced Oligocene compression. This tectonic model accounts for the distribution of mid-Cretaceous volcanism, fault-bounded basins, and regional unconformities, as well as mid to late Cretaceous subsidence of the Scotian basin and Oligocene uplift of the eastern Scotian Shelf.

scholarly journals Spatial evolution of Zagros collision zone in Kurdistan, NW Iran: constraints on Arabia–Eurasia oblique convergence

Solid Earth ◽  
2016 ◽  
Vol 7 (2) ◽  
pp. 659-672 ◽  
Author(s):  
Shahriar Sadeghi ◽  
Ali Yassaghi
Keyword(s):  
Late Cretaceous ◽  
Strike Slip ◽  
Suture Zone ◽  
Fault System ◽  
Spatial Evolution ◽  
Nw Iran ◽  
Collision Zone ◽  
Deformation Partitioning ◽  
Oblique Convergence ◽  
External Part

Abstract. Stratigraphy, detailed structural mapping and a crustal-scale cross section across the NW Zagros collision zone provide constraints on the spatial evolution of oblique convergence of the Arabian and Eurasian plates since the Late Cretaceous. The Zagros collision zone in NW Iran consists of the internal Sanandaj–Sirjan, Gaveh Rud and Ophiolite zones and the external Bisotoun, Radiolarite and High Zagros zones. The Main Zagros Thrust is the major structure of the Zagros suture zone. Two stages of oblique deformation are recognized in the external part of the NW Zagros in Iran. In the early stage, coexisting dextral strike-slip and reverse dominated domains in the Radiolarite zone developed in response to deformation partitioning due to oblique convergence. Dextral-reverse faults in the Bisotoun zone are also compatible with oblique convergence. In the late stage, deformation partitioning occurred during southeastward propagation of the Zagros orogeny towards its foreland resulting in synchronous development of orogen-parallel strike-slip and thrust faults. It is proposed that the first stage was related to Late Cretaceous oblique obduction, while the second stage resulted from Cenozoic collision. The Cenozoic orogen-parallel strike-slip component of Zagros oblique convergence is not confined to the Zagros suture zone (Main Recent Fault) but also occurred in the external part (Marekhil–Ravansar fault system). Thus, it is proposed that oblique convergence of Arabian and Eurasian plates in Zagros collision zone initiated with oblique obduction in the Late Cretaceous followed by oblique collision in the late Tertiary, consistent with global plate reconstructions.

Sign in / Sign up

Export Citation Format

Share Document