scholarly journals MCMASTER VIRTUAL DESIGN PROJECTS

Author(s):  
A. Spence ◽  
B. Ruberto ◽  
C. Parisson

This paper describes several 2003-2004 projects using virtual design tools at McMaster University. Students begin by repeat modeling of a part from first year. New projects were to develop a 3D CAD tool for quickly updating new home kitchen design, and to apply CAD to Formula SAE racecar cockpit design. An anthropomorphic model was included to verify reach and visibility. In both cases, stereo display was used to improve the 3D visualization, and comparison was made with actual construction. The third project was to explore online CAD animation of a FARO measuring arm.

Author(s):  
Ismail Fidan ◽  
Adam McGough ◽  
Jeff Foote

Formula SAE (FSAE) is a design competition organized each year by the Society of Automotive Engineers (SAE). The objective of the competition is to bring the best and brightest future engineers from each participating school to present a small scale race car. Although this sounds like a relatively simple concept, the actual execution is rather challenging and rewarding for the team. For almost three years Tennessee Tech University (TTU) has had a FSAE team. The first year was a planning year, so Tennessee Tech University has participated in the competition for the last two years. Both years have been extreme learning experiences since TTU was not prepared for the level of competition brought by participating schools. However TTU FSAE team is beginning to implement modern design tools such as FEA, Virtual Manufacturing, and Rapid Prototyping to help streamline the design efforts so that one day Golden Eagle FSAE will be one of the top competing teams. In this publication, authors will report on one Golden Eagle FSAE component (the rear upright) development stages and its accomplishments.


Author(s):  
Brian Frank ◽  
David Strong

A pilot of a paper-based assessment tool of design skill is presented. The tool is used to assess the development of skills before and after a first year design experience, and before and after a third year multidisciplinary course in design tools and methodology. The tool is an open-ended survey that may be administered quickly and assessed using a simple rubric. Significant improvements were found over the term of the first year course in the areas of problem definition and testing; improvements were observed in the categories of Conceptual Design, Preliminary Design, and Detailed Design in the third year course. Ideas for future improvement are discussed.


Author(s):  
Frances Harris
Keyword(s):  

The third chapter traces the beginning of the partnership through the first year of Queen Anne’s reign, as Marlborough persuades Godolphin to return to office as Lord Treasurer and his ministerial partner, with the declared aim of ‘moderation’, that is, holding the balance between the Tories and Whigs on the basis of their support of the war. The role of Queen Anne’s husband Prince George is examined and Marlborough’s and Godolphin’s separate roles are explored, along with the significance of their extensive correspondence. Marlborough is unexpectedly successful in his first campaign, but his determination to obtain a grant from Parliament to support his dukedom jeopardizes Godolphin’s project for war-supply, and their rival Rochester contests control of the Treasury and therefore the war. Marlborough forces Rochester’s resignation and the partnership is confirmed when Marlborough’s only son dies shortly before he leaves for the Continent and he adopts Godolphin’s son as his heir.


2021 ◽  
Vol 49 (1) ◽  
pp. 030006052098284
Author(s):  
Tingting Qiao ◽  
Simin Liu ◽  
Zhijun Cui ◽  
Xiaqing Yu ◽  
Haidong Cai ◽  
...  

Objective To construct deep learning (DL) models to improve the accuracy and efficiency of thyroid disease diagnosis by thyroid scintigraphy. Methods We constructed DL models with AlexNet, VGGNet, and ResNet. The models were trained separately with transfer learning. We measured each model’s performance with six indicators: recall, precision, negative predictive value (NPV), specificity, accuracy, and F1-score. We also compared the diagnostic performances of first- and third-year nuclear medicine (NM) residents with assistance from the best-performing DL-based model. The Kappa coefficient and average classification time of each model were compared with those of two NM residents. Results The recall, precision, NPV, specificity, accuracy, and F1-score of the three models ranged from 73.33% to 97.00%. The Kappa coefficient of all three models was >0.710. All models performed better than the first-year NM resident but not as well as the third-year NM resident in terms of diagnostic ability. However, the ResNet model provided “diagnostic assistance” to the NM residents. The models provided results at speeds 400 to 600 times faster than the NM residents. Conclusion DL-based models perform well in diagnostic assessment by thyroid scintigraphy. These models may serve as tools for NM residents in the diagnosis of Graves’ disease and subacute thyroiditis.


2021 ◽  
Vol 11 (7) ◽  
pp. 3071
Author(s):  
Yuze Dan ◽  
Zhenjiang Shen ◽  
Yiyun Zhu ◽  
Ling Huang

In recent years, designing in existing environments has been consistently emphasized in community planning. However, practicing such on-site design is not easy for designers, because the current technical conditions do not allow virtual design objects into real environments for 3D visualization and interaction. Thus, designers’ intuitive design perceptions, accurate design judgments, and convenient design decisions are hardly supported. This paper explores the possibilities of using mixed reality (MR) technology to improve designers’ on-site design experiences in community planning. For this, we introduced an MR design support system (MR-DSS) for the interactive on-site 3D visualization of virtual design objects. With the MR-DSS, we performed a design experiment with sixteen participants in a typical on-site design scene of community planning. The results showed that the MR technology could provide designers with intuitive design perceptions, accurate design judgments, and convenient design decisions, thus effectively improving their on-site design experiences.


2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 1672.2-1672
Author(s):  
N. Busquets-Pérez ◽  
C. Sánchez-Piedra ◽  
P. Vela-Casasempere ◽  
M. Freire-Gonzalez ◽  
C. Bohórquez ◽  
...  

Background:Ustekinumab has been efficacy and safety for psoriatic artritis in clinical trials.Objectives:To assess effectiveness, by means of drug persistence analisys, and safety of ustekinumab in patients with psoriastic arthritis in Biobadaser.Methods:BIOBADASER is the Spanish registry of biological drugs of the Spanish Society of Rheumatology and the Spanish Medicines Agency. We identified patients aged 18 years or more with psoriatic arthritis on Ustekinumab. A descriptive analysis was performed.The persistence of ustekinumab therapy was calculated with a Kaplan-Meier curve and was compared with the persistence of anti-TNF, according to line treatment. Log Rank test was used to establish a comparison. Adverse events occurring with ustekinumab are described according to year treatment.Results:One hundred and twelve patients were on ustekinumab. Most of them were on their second or third line treatment: 53.57% more than one biological therapy (BT), 19.64% second BT, 26.79% were naïve for BT. Most of them were on 45 mg dose: 88.24%. Median duration of disease at Ustekinumab initiation was 10.1 SD 7.2 years; 69.23% had peripheral arthritis; 45.24% had obesity and 39.29% were overweight; 40,6% were on prednisone and 59.82% on DMARD. The cause of discontinuation of treatment was mainly inefficacy (82.61%) and less common an adverse event (6.52%). The probability of persistence of treatment with ustekinumab was 0.83 (95% CI 0.63-0.92) at year 1, 0.79 (0.58-0.90) at year 2 and 0.79 (0.58-0.9) at year 3 when ustekinumab was prescribed as the first line treatment. The persistence decrease when ustekinumab was prescribe as a second and third treatment: being 0.53 (0.27-0.73) the first year, 0.46 (0.22-0.67) the second year and 0.46 (0.22-0.67) as a second line treatment and 0.58 (0.44-0.70) the first year, 0.33 (0.17-0.50) the second year and 0.33 (0.17-0.50) the third year as a third line treatment.The persistence was similar to anti-TNF treatment, according to line treatment. Adverse events were mainly mild (97.83%) and occurred the first year of treatment. Most of the adverse events were classified as “infections and infestations” (36.96%).Conclusion:The persistence of ustekinumab was high, being 83% at the end of the first year on treatment and 79% the second and the third year of treatment. The persistence of ustekinumab was higher when if it was the first line treatment compared as if it was used as the second o third BT option. The persistence of Ustekinumab is similar to the persistence of anti-TNF treatments in all the analyzed treatment lines (no statistically differences were found). Adverse events occurred mainly during the first year treatment. They were mainly mild adverse events and the frequency decreased within the second and third year of treatment.References:[1]Treatment with ustekinumab in a Spanish cohort of patients with psoriasis and psoriatic arthritis in daily clinical practice.Almirall M, Rodriguez J, Mateo L, Carrascosa JM, Notario J, Gallardo F. Clin Rheumatol. 2017 Feb;36(2):439-443;[2]Minimal disease activity in patients with psoriatic arthritis treated with ustekinumab: results from a 24-week real-world study.Napolitano M, Costa L, Caso F, Megna M, Scarpa R, Balato N, Ayala F, Balato A. J Clin Rheumatol. 2018 Oct;24(7):381-384;[3]Minimal Disease Activity and Patient-Acceptable Symptom State in Psoriatic Arthritis: A Real-World Evidence Study With Ustekinumab.Queiro R, Brandy A, Rosado MC, Lorenzo A, Coto P, Carriles C, Alperi M, Ballina J. Actas Dermosifiliogr. 2018 Jun 28;[4]An analysis of Drug Survival, Effectiveness, and Safety in Moderate to Severe Psoriasis Treated With Ustekinumab: An Observational Study of 69 Patients in Routine Clinical Practice.Salgüero Fernández I, Gil MH, Sanz MS, Gullón GR;Disclosure of Interests:None declared


Author(s):  
Roger Broetto Rocha ◽  
Lucio Martins Fassini Da Silva ◽  
Cleiton Kenup Piumbini ◽  
Luiz Otavio Buffon ◽  
Marconi Frank Barros

Resumo: Este trabalho tem por objetivo relatar uma atividade didática, realizada no Programa Institucional de Bolsas de Iniciação à Docência (PIBID), envolvendo o ensino de Astronomia numa turma do primeiro ano do ensino médio de uma escola do município de Vitória, ES. A atividade foi planejada e executada pelo subprojeto do Curso de Licenciatura em Física do IFES – Campus Cariacica. A metodologia foi baseada na Gamificação aplicada ao ensino-aprendizagem. A intervenção ocorreu em três etapas, sendo a primeira realizada em dois encontros, através de apresentações dialogadas sobre Astronomia usando slides e gifs, a segunda consistiu na aplicação da Gamificação através de um jogo e finalizando com a terceira etapa, foi aplicado um pequeno questionário. Ao final houve um momento de avaliação e as análises constataram que o ensino de Astronomia através da atividade gamificada do jogo conseguiu motivar os alunos, despertar o interesse pelo assunto e produzir indícios de aprendizagem.Palavras-chave: Gamificação em sala de aula; Ensino de Astronomia; PIBID. Gamification in astronomy teachingAbstract: This work aims to report on a didactic activity, carried out in the Institutional Program for Teaching Initiation Scholarships (PIBID), involving the teaching of Astronomy in a class of the first year of high school at a school in the city of Vitória, ES. The activity was carried out by the subproject of the Physics Degree Course at IFES - Campus Cariacica. The intervention took place in three stages, the first being in two meetings, through dialogued presentations on Astronomy using slides and gifs, the second consisted of the application of Gamification through a game and ending with the third stage, a small questionnaire was applied. At the end there was a moment of evaluation and the analyzes found that the teaching of Astronomy through the gamified activity of the game managed to motivate students, arouse interest in the subject and produce evidence of learning.Keywords: Gamification activity in the classroom; Astronomy teaching; PIBID. 


Author(s):  
Elaine Espino Barr ◽  
Manuel Gallardo Cabello ◽  
Fernando González Orozco ◽  
Arturo Garcia Boa

This paper deals with the growth and mortality analysis of the burrito grunt A n i s o t remus interru p t u s on the coast of Colima, México. The estimated growth parameters are: L¥ = 50.59 cm; W¥ = 5,051.04 g; k = 0.147 years- 1; to = -0.916 years; A0 . 9 5 = 19.46 years. Most of the growth occurred during the first year of life, when the grunt grows 12.52 cm, the second year it grows 4.95 cm and the third, 4.60 cm. The highest value of the condition index took place between February and September. The total mortality rate (Z) was calculated as 0.53 years- 1. These values are basic for the plan of administration of the fishery of this species.


2020 ◽  
Vol 318 ◽  
pp. 01041
Author(s):  
Athena Baronos ◽  
Odysseas Manoliadis ◽  
Aristeidis Pavlidis

In today’s world the design of multiple mailboxes comes to cover the evolution of logistics in delivering mail where the postman is not required to visit every user. In this research the 3D visualization is used for the design of multiple mailboxes for domestic use. It concerns the design of mailboxes in ergonomic building blocks and apartment complexes in 3D design so that they can be easily manufactured. Between the advantages of this design will be rapid production of ready-made products production of prototypes that enables testing at the design stage and reduces the time and the cost of production. The design when done with 3D CAD can be manufactured with modern machine tooling methods. In this paper after an extensive Literature Review the postal multiple mailboxes is used as a case study in the use of 3D CAD for 3D printing. A methodology is proposed that enables the examination of prototypes at the design stage according to specifications and allows the manufacturing department of a company to prepare the right tools and begin installing production lines. Conclusively this method gives the advantage of designing the product and supporting the production of scaffolds that can be functionally and ergonomically tested before finalizing the production.


television, constrained at the time from such a move by Independent Broadcasting Association regulations (Willock 1992). Coronation Street and Crossroads had been stripped across three evenings, and EastEnders across two. Stripping across five days/nights had long been common in Australian television. This was first done for Number 96 (1972–1977) by Ian Holmes, later the Grundy Organisation’s president. So successful was the stripping of Neighbours across five days that the same principle has since been adopted in the UK for Home and Away. David Liddiment, Head of Entertainment at Granada, which produces Coronation Street and Families, both Neighbours competitors, went so far as to say: “In future, no-one will contemplate running a daytime serial in the UK except as a strip. It’s inevitable that you build success more quickly when you strip a soap” (Liddiment 1989: 20). Second, on scheduling, Loughton made the schedules more cost-effective by repeating each edition daily (Patterson 1992). “The time-slots chosen by the BBC were 1.30 pm, with a repeat the following morning at 9.05. It attracted a typical audience of housewives, shift workers, the unemployed, people home sick” (Oram 1988: 48). After the unexpected success of Neighbours’ first year, it was decided to reschedule the next morning repeat for the same evening, at 5:35 p.m. This was to cater for working mothers, but most of all for schoolchildren who had previously played truant to watch the series. The most famous story attributes the schedule change to the representations made to no less than Michael Grade himself by his daughter. Rescheduled in January 1988, Neighbours nearly doubled its audience to 16.25 million within six weeks. By Christmas 1988, audiences topped 20 million. Five-day stripping and repeat screenings, then, offered a regularity and familiarity significant in capturing such huge audiences, representing one-third of the UK population. The third precondition was the UK “mediascape.” This included a very broad familiarity with Australian soaps. When Neighbours was launched on October 27, 1986, The Sullivans, A Country Practice, Young Doctors, Flying Doctors, Richmond Hills, Prisoner: Cell Block H, and others had broadened the paths already beaten by many Australian films released in the UK. Michael Collins, executive in charge of production at JNP, producers of A Country Practice, maintains that the serial, screened in the UK since 1983, “was a forerunner in getting audiences used to Australian drama” (Collins 1991). And one factor contributing to Neighbours’s topping the ratings late in 1988 would have been the demise of Crossroads, the British soap created by Reg Watson, in spring 1988 after a twenty-four-year run. Fourth, tabloids, television, and un(der)employment. Under Thatcher and Murdoch, the tabloid press in Britain expanded in the mid-1980s, producing what one television executive described, albeit parodically, as “one page of news, one page of sex, and twenty-two pages of television and sport” (Patterson 1992). So when Neighbours was stripped over five days, “the papers really noticed it” (Willock 1992). Together with Woman, Woman’s Day, Jackie, Scoop, and other teen magazines, the tabloids ran myriad stories on Kylie, Jason, Peter O’Brien, and so on, as is indicated by the three sample headlines from three successive days:

2002 ◽  
pp. 113-113

Sign in / Sign up

Export Citation Format

Share Document