scholarly journals ONE-A-DAY PROBLEMS FOR IMPROVING STUDENT LEARNING AND STUDY HABITS

Author(s):  
Mary Robinson ◽  
Carol Hulls ◽  
Chris Rennick

At the University of Waterloo, Mechatronics Engineering students take their first programming course in their first academic term. In 2016, Waterloo introduced a two-day long fall break immediately following the Thanksgiving weekend. The fall break back-to-back with their midterm week means students have as many as 18 days between programming lectures. The breaks also interrupt the schedule of weekly assignments that provide students’ primary means of practicing programming. In an attempt to mitigate any negative effects of the break on those students who are not experienced programmers and may not know how to use their time effectively, "One-a-Day Problems" were tried. Students were expected to work on that one problem for the day, which was expected to take roughly 30-minutes to complete, and were encouraged to contact the instructor or other members of the teaching team with any questions or concerns. The problems remained available on the LMS throughout the term and no solutions to these problems were posted on the LMS. Students enjoyed receiving extra practice problems using this format, and engaging with these questions resulted in higher performance on both the midterm and final exam. Engagement with the problems was lower than desired, however, especially with students with no prior programming experience.  

2019 ◽  
Vol 14 (2) ◽  
pp. 244-253
Author(s):  
Ramadhan Prasetya Wibawa ◽  
Rohana Intan Astuti ◽  
Bayu Aji Pangestu

This study aims to find out the application and contribution of smartphone-based application ““quizizz”” as learning media in the University of PGRI Madiun. The method used in this research is descriptive qualitative. Data analysis technique used is an interactive method, including the process of collecting data, reducing data (compiling data in patterns, categories and specific issues), presenting data (compiling data in the form of matrices, graphs, networks, certain charts) and drawing conclusions. This research was conducted at the University of PGRI Madiun. The subjects of this study were students in Accounting and Economic Education. The results showed that the usage of smartphone-based application “quizizz” as learning media can make students enthusiastic in participating in learning, so students can focus and maximize the use of smartphones as a fun learning media. The concept of maximum learning will have an impact on improving student learning outcomes.


Author(s):  
Carol Hulls ◽  
Chris Rennick ◽  
Sanjeev Bedi ◽  
Mary Robinson ◽  
William Melek

Prior to 2010, Mechanical and Mechatronics Engineering students at the University of Waterloo were taught an introductory programming course using C++ in first year. Historically, the emphasis was on learning syntax; practising problem-solving was a distant second priority. In addition, many students were noticeably disengaged in lectures, and the assessments used were not authentic.Starting in 2010, a course project was implemented to address these concerns. The project was immediately well received by students, as evidenced by a noticeable number of students going well beyond the minimum project requirements and the variety of projects implemented. Since the project was introduced, the students have been able to successfully answer less structured final exam questions. The increase in problem-solving and thinking skills more than offsets the reduction in language-specific facts. The logistics, challenges and resources required to implement a project of this scope will be described


2019 ◽  
Vol 4 (3) ◽  
pp. 14-16
Author(s):  
Emma Rumahlewang ◽  
Lambertus J. Lokollo ◽  
Beatrix J.M. Salenussa

This study aims to determine the effect of learning motivation and study habits on the learning outcomes of high school students in Ambon City. Survey research was conducted at SMA Ambon samples included 200 students drawn at random(randomsampling).Testing the research hypothesis using multiple regression analysis with SPSS. The results of this study conclude that: (1) there is a significant effect of learning motivation on student learning outcomes, (2) there is a significant effect of learning habits on student learning outcomes, and (3) there is a joint effect of learning motivation and learning habits on learning outcomes students. Based on the results of this study, it was recommended that improving student learning outcomes required increased learning motivation and study habits.


2014 ◽  
Vol 7 (1) ◽  
pp. 1 ◽  
Author(s):  
Joanne Fox ◽  
Gülnur Birol ◽  
Andrea Han ◽  
Alice Cassidy ◽  
Ashley Welsh ◽  
...  

The First Year Seminar in Science (SCIE113) was developed during 2009/2010 academic year through an exemplary collaboration between faculty, administrators and educational support staff in the Faculty of Science at the University of British Columbia (UBC). SCIE113 reflects the vision and values of the Faculty of Science and UBC by offering an enriched educational experience to its first year students. The small class format provides students an intimate connection with faculty, an opportunity for significant engagement early in their academic careers, and helps with transitioning to the university environment.The overall goal of SCIE113 is to introduce skills that cross disciplinary boundaries and that every scientist and student in science must master: how to constructively build an evidence-based argument and how to communicate effectively. The overarching course goals are to define and discuss the elements of a scientific approach, to think like a scientist, and to communicate science through writing. SCIE113 fosters the development of authentic scientific scholars through the construction, integration, and use of argumentation skills and through an exploration of science as a way of knowing using a collaborative class environment.  SCIE113 engages students in interactive and collaborative activities and promotes learning of scientific argumentation and writing skills. In-class and out-of-class activities allow students to frequently discuss, debate, and defend their views of science. Specific learning activities such as case studies, targeted readings, and examinations of media and scientific articles allow students to evaluate the validity of scientific claims and to construct a scientific argument. Meanwhile, activities such as reflections, in-class writing, peer review, and discussions on the fundamentals of writing help students to improve their writing skills which are assessed by three short essays and a term project. The guided peer review process, which fosters collaboration, enables students to provide expert-like feedback to their peers. Faculty and TA feedback completes the review process.  SCIE113 is an exemplary model of collaboration and is guided by best practices in instructional design.SCIE113 is a model of collaborative course design and instruction with a large, multi-disciplinary teaching team. The design of SCIE113 is guided by best practices and continues to evolve in response to emerging research. The teaching team consists of faculty and teaching assistants from 14 different departments, representing four Faculties, with a wide range of expertise and experience in fostering student learning. The teaching team meets bi-weekly to cultivate reflective practice and to support faculty in their professional development for teaching this writing intensive course.SCIE113 is informed by the scholarship of teaching and learning.SCIE113 is informed by comprehensive research that is incorporated into course design and implementation and utilizes validated assessment tools. Frequent feedback from students and faculty, and measures of perceived and actual learning gains, ensure successful course implementation and promote student learning. 


2016 ◽  
Vol 4 (1) ◽  
pp. 89
Author(s):  
Laelatul Badriah

<p>Improving student learning outcomes can be known through examination or evaluation of student learning outcomes, as well as to improve the quality of education at a particular Islamic Junior Secondary School (MTs) Ali Maksum that can be seen through the entrance test the institution itself. Entrance test could be determine the quality of student learning outcomes, therefore it is very important be re-examined or entrance test kits that is used to determine the graduation of new students. Entrance tests can also determine the outcome of the first year students in the first and second semester. In this case retesting can be done by looking at the results of the entrance test, the results of the 1st semester final exam, and the results of the final exams 2 that is analyzed using multiple regression. This analysis is used to predict the results of the entrance test and see how much influence the results of the 1st semester final exams and final exams 2. From the discussion, it is a result of its high predictive significance between entrance exams, final exams 1, 2 and semester exams in the first year in MTs Ali Maksum.</p><p> </p><p><strong><em>Keywords</em></strong> : <em>Entrance test, predictabilities, validity</em></p>


Author(s):  
Juan Abelló ◽  
Douglas Ruth

Abstract –First-year engineering students at the University of Manitoba take a thermodynamics course.  The summer instructor taught the course differently from the fall and winter terms. He combined tutorials with lectures to introduce active learning to the course, implemented an online problem library and increased the number of term tests. Students in the summer 2016 term were given a similar thermodynamic cycle question in their final exam as students in the winter 2016 term. Student performance inthe cycle question was compared in order to evaluate the effectiveness of the new teaching method. Both groups had similar question averages with generally similar question score histograms. However, winter students scored an average of 10% below their GPA, while summer students scored an average of 1% below their GPA. The difference between these averages is statistically significant (97.5% confidence). These results suggest that the new teaching approach leads to better student performance when solving thermodynamic cycles.  


Author(s):  
Seach Chyr (Ernest) Goh ◽  
Sumi Siddiqua

First year engineering students at the University of British Columbia Okanagan, take the Fundamentals of Sustainable Engineering Design course as part of the suite of common courses for all engineering students regardless of discipline. The largest assessment components of the course are the final exam (40%) and the design project (40%). For the design project, teams of 4 – 6 students build a scaled-down prototype of a Well Ventilated yet Energy Efficient Room (WeVeyEER) that must be able to maintain its interior temperature at 10°C above ambient and at the same time continuously exchange stale air from within with fresh air from outside. It also has to meet load-bearing, size and power supply constraints. The energy consumption, rate of air exchange and weight are parameters for comparing performance of the prototypes. The majority of teams (55 out of 64) could achieve the requirements. Feedback about the project was mixed, with 57 positive and 56 negative comments.  


Author(s):  
Laura Soriano ◽  
Danny Mann ◽  
Marcia R. Friesen

Recent accreditation requirements by the Canadian Engineering Accreditation Board (CEAB) have forced engineering educators to focus on the outcomes of their teaching efforts. Faculty members are rapidly gaining expertise in the assessment of the 12 graduate attributes, and it is envisioned that emphasis on outcomes-based assessment will improve both the quality of the overall curriculum and individual course instruction. Nevertheless, the ultimate goal of any educational activity is to foster student learning. It is anticipated that students will gain a better understanding of the graduate attributes being covered in their courses if they are given the opportunity to self-reflect upon their educational experiences and achievements. The portfolio is the tool most often used to achieve this goal of self-reflection. A project has been undertaken in the Department of Biosystems Engineering at the University of Manitoba to assess the impact of self-reflection on student learning. During the fall of 2018, a series of voluntary workshops were organized i) to introduce Biosystems Engineering students to the purpose and art of self-reflection, ii) to describe self-reflection in the context of the Canadian Engineering Accreditation Board graduate attributes, iii) to introduce the e-portfolio tool, iv) to develop the skill of self-reflective writing, and v) to demonstrate the link between e-portfolio development and career success. The purpose of the paper is to describe the workshop series, the focus groups that followed the workshop series, and the theoretical framework within which the work is positioned.    


Author(s):  
Patrick Willems

Engineers in a globalizing world need innovative skills as well as learning capabilities. They often need to cooperate in different teams in the supply chain of a company. Thus, they should practice before they perform like athletes and musicians do, but they cannot practice by making mistakes since it would be an expensive way to learn. Serious business games serve as a platform for the exchange of ideas, the sharing of expertise, and the alignment of objectives. Higher productivity along with employee satisfaction are their most prominent outcomes. Engineers should be able to work in teams, where behaviors can have both positive and negative effects. Serious business games can support organizations to develop more effective team behavior, influence the level of cooperation in a group, and, in turn, increase the company's profit. In this study, the authors examine a supply chain serious game called “The Fresh Connection” and discuss how it can improve the learning process at the university and further allow people to continue their learning process as an engineering professional.


Sign in / Sign up

Export Citation Format

Share Document