scholarly journals The Use of the Wheel in the Production of Pithoi: Preliminary Results and Lessons Learnt from Experimental Sessions

2021 ◽  
Vol XII (2) ◽  
pp. 155-171
Author(s):  
Francesca Porta ◽  
Keyword(s):  
Bronze Age ◽  
Point Of View ◽  
Comprehensive Understanding ◽  
X Ray ◽  
Preliminary Results ◽  
Experimental Approaches ◽  
Relative Rarity ◽  
Basin Area ◽  
The Mediterranean Basin ◽  
Large Diffusion

Large earthenware storage vessels, known as pithoi, were very widespread in the Mediterranean Basin area, both in domestic and non-domestic contexts, throughout the entire Bronze Age. From a technological point of view, due to their large dimensions, the production of pithoi is very demanding and requires highly skilled and expert artisans. However, despite their large diffusion and their prominent role in resource management, pithoi have received less attention in terms of research in comparison to other types of vessels; technological studies, in particular, stand out for their relative rarity. Indeed, experimental approaches are scant, thus preventing a comprehensive understanding of the manufacturing process of pithoi. This paper presents the preliminary results of two experimental sessions dedicated to the examination of the use of the wheel in the manufacture of these large clay containers. Experimental vessels have been analysed by way of the naked eye and through X-ray analysis.

Specimen Preparation for Clinical Applications of X-Ray Microanalysis

1990 ◽  
Vol 48 (2) ◽  
pp. 328-329
Author(s):  
J.D. Shelburne ◽  
G.M. Roomans
Keyword(s):  
Carbon Coating ◽  
Clinical Applications ◽  
Point Of View ◽  
Practical Significance ◽  
Sweat Test ◽  
Specimen Preparation ◽  
Tissue Preparation ◽  
X Ray ◽  
Gallbladder Stones ◽  
Clinical Problems

Proper preparative procedures are a prerequisite for the validity of the results of x-ray microanalysis of biological tissue. Clinical applications of x-ray microanalysis are often concerned with diagnostic problems and the results may have profound practical significance for the patient. From this point of view it is especially important that specimen preparation for clinical applications is carried out correctly.Some clinical problems require very little tissue preparation. Hair, nails, and kidney and gallbladder stones may be examined and analyzed after carbon coating. High levels of zinc or copper in hair may be indicative of dermatological or systemic diseases. Nail clippings may be analyzed (as an alternative to the more conventional sweat test) to confirm a diagnosis of cystic fibrosis. X-ray microanalysis in combination with scanning electron microscopy has been shown to be the most reliable method for the identification of the components of kidney or gallbladder stones.A quantitatively very important clinical application of x-ray microanalysis is the identification and quantification of asbestos and other exogenous particles in lung.

The New Swedish Cyprus Expedition 2015. Excavations at Hala Sultan Tekke. Preliminary results

2016 ◽  
Vol 9 ◽  
pp. 33-58 ◽  
Author(s):  
Peter M. Fischer ◽  
Teresa Bürge ◽  
Dominika Kofel
Keyword(s):  
Bronze Age ◽  
Ground Penetrating Radar ◽  
Preliminary Results ◽  
15Th Century ◽  
Geomagnetic Survey ◽  
New City ◽  
Ground Penetrating ◽  
Large Compound ◽  
The Bronze Age

In 2015 the sixth season of the renewed excavations at the Bronze Age city of Hala Sultan Tekke continued in the compound which was ex­posed in Area 6W in 2013–2014. Further evidence of textile process­ing was found. The results of another ground-penetrating radar (GPR) survey in 2014 indicated a new city quarter west of the former. Exca­vations were initiated there in 2015 and parts of the remains of a large compound were exposed. Two occupational phases, Strata 1 and 2, could be determined, both of which were destroyed in a conflagration. Further excavations were carried out in Area A, 550 m to the east of Area 6W and close to the mosque of Hala Sultan Tekke. In 2014 more than 80 circular anomalies were indicated by our geomagnetic survey supported by GPR. Twelve of them were excavated in 2015. Most of them turned out to be backfilled wells of which the fills mainly date from the 13th and 12th centuries BC (Late Cypriot IIC–IIIA). One of the excavated anomalies is interpreted as an offering pit. The preliminary date according to the pottery is roughly the 15th century BC (Late Cypriot IB).

THEORETICAL AND METHODOLOGICAL ASPECTS OF UNDERSTANDING OF THE SYSTEM OBJECT IN DESIGN

2020 ◽  
Vol 1 (4) ◽  
pp. 5-10
Author(s):  
V. Barysheva ◽  
O. Druzhinina
Keyword(s):  
Scientific Research Institute ◽  
Point Of View ◽  
Design Stage ◽  
Comprehensive Understanding ◽  
Design Culture ◽  
Design Program ◽  
Methodological Aspects ◽  
Cultural Experts ◽  
Union Scientific Research Institute ◽  
Separate Product

The article is devoted to the analysis of the system object from the point of view of design from design, sociocultural and philosophical positions. The authors systematize the definitions of a system object of design proposed in the 1960–1980s by theorists and practitioners, art historians, cultural experts and philosophers from different countries, including Russia, which allows a comprehensive understanding of the phenomenon of design culture. This article is devoted to the characteristic properties of the system object in design. They were considered and analyzed on the example of the «Absheron» design-program when designing of agricultural village). This concept was developed at the All-Union Scientific Research Institute of Technical Aesthetics (VNIITE) in 1983. Using the same example, the features of the approach to designing a system object in design was observed not only as a separate product, but as a sociocultural situation that constantly changes at each design stage.

Synthesis and Evaluation of Levulinic Ester as Biodiesel Additives

2020 ◽  
Vol 71 (8) ◽  
pp. 21-26
Author(s):  
Elena-Emilia Oprescu ◽  
Cristina-Emanuela Enascuta ◽  
Elena Radu ◽  
Vasile Lavric
Keyword(s):  
Maximum Yield ◽  
Strength Distribution ◽  
Point Of View ◽  
Reaction Parameters ◽  
X Ray ◽  
Ethyl Levulinate ◽  
Ft Ir ◽  
Ir Analysis ◽  
Biodiesel Blend ◽  
Acid Strength Distribution

In this study, the SO42-/TiO2-La2O3-Fe2O3 catalyst was prepared and tested in the conversion of fructose to ethyl levulinate . The catalyst was characterized from the point of view of the textural analysis, FT-IR analysis, acid strength distribution, X-ray powder diffraction and pyridine adsorption IR spectra. The influence of the reaction parameters on the ethyl levulinate yield was study. The maximum yield of 37.95% in levulinate esters was obtained at 180 �C, 2 g catalyst and 4 h reaction time. The effect of ethyl levulinate addition to diesel-biodiesel blend in different rates, i.e, 0.5, 1, 2.5, 5 (w.t %) on density, kinematic viscosity and flash point was evaluated and compared with the European specification.

Infrared spectroscopic study of the YPO4-YCrO4 system

1985 ◽  
Vol 50 (10) ◽  
pp. 2139-2145
Author(s):  
Alexander Muck ◽  
Eva Šantavá ◽  
Bohumil Hájek
Keyword(s):  
Spectroscopic Study ◽  
Infrared Spectra ◽  
Point Of View ◽  
Mixed Crystals ◽  
Crystal Symmetry ◽  
Infrared Spectroscopic Study ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infrared Spectroscopic ◽  
Diffraction Patterns

The infrared spectra and powder X-ray diffraction patterns of polycrystalline YPO4-YCrO4 samples are studied from the point of view of their crystal symmetry. Mixed crystals of the D4h19 symmetry are formed over the region of 0-30 mol.% YPO4 in YCrO4. The Td → D2d → D2 or C2v(GS eff) correlation is appropriate for both PO43- and CrO43- anions.

scholarly journals ZnOTe Compounds Grown by DC-Magnetron Co-Sputtering

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 570
Author(s):  
Olga Sánchez ◽  
Manuel Hernández-Vélez
Keyword(s):  
Molar Fraction ◽  
Variable Parameter ◽  
Point Of View ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sample Series ◽  
Solid Phases ◽  
The One ◽  
High Bulk ◽  
Substrate Sample

ZnOTe compounds were grown by DC magnetron cosputtering from pure Tellurium (Te) and Zinc (Zn) cathodes in O2/Ar atmosphere. The applied power on the Zn target was constant equal to 100 W, while the one applied on the Te target took two values, i.e., 5 W and 10 W. Thus, two sample series were obtained in which the variable parameter was the distance from the Te targets to the substrate. Sample compositions were determined by Rutherford Backscattering Spectroscopy (RBS) experiments. Structural analysis was done using X-Ray diffraction (XRD) spectrometry and the growth of the hexagonal w-ZnO phase was identified in the XRD spectra. RBS results showed high bulk homogeneity of the samples forming ZnOTe alloys, with variable Te molar fraction (MF) ranging from 0.48–0.6% and from 1.9–3.1% for the sample series obtained at 5 W and 10 W, respectively. The results reflect great differences between the two sample series, particularly from the structural and optical point of view. These experiments point to the possibility of Te doping ZnO with the permanence of intrinsic defects, as well as the possibility of the formation of other Te solid phases when its content increases. The results and appreciable variations in the band gap transitions were detected from Photoluminescence (PL) measurements.

scholarly journals THE BEGINNING OF THE IRON AGE AT ARSLANTEPE: A 14C PERSPECTIVE

Radiocarbon ◽  
2021 ◽  
pp. 1-19
Author(s):  
Federico Manuelli ◽  
Cristiano Vignola ◽  
Fabio Marzaioli ◽  
Isabella Passariello ◽  
Filippo Terrasi
Keyword(s):  
Mass Spectrometry ◽  
Bronze Age ◽  
High Precision ◽  
Iron Age ◽  
Accelerator Mass Spectrometry ◽  
Late Bronze Age ◽  
13Th Century ◽  
Historical Events ◽  
Preliminary Results ◽  
Archaeological Data

ABSTRACT The Iron Age chronology at Arslantepe is the result of the interpretation of Luwian hieroglyphic inscriptions and archaeological data coming from the site and its surrounding region. A new round of investigations of the Iron Age levels has been conducted at the site over the last 10 years. Preliminary results allowed the combination of the archaeological sequence with the historical events that extended from the collapse of the Late Bronze Age empires to the formation and development of the new Iron Age kingdoms. The integration into this picture of a new set of radiocarbon (14C) dates is aimed at establishing a more solid local chronology. High precision 14C dating by accelerator mass spectrometry (AMS) and its correlation with archaeobotanical analysis and stratigraphic data are presented here with the purpose of improving our knowledge of the site’s history and to build a reliable absolute chronology of the Iron Age. The results show that the earliest level of the sequence dates to ca. the mid-13th century BC, implying that the site started developing a new set of relationships with the Levant already before the breakdown of the Hittite empire, entailing important historical implications for the Syro-Anatolian region at the end of the 2nd millennium BC.

AGN1 vs AGN2 dichotomy as seen from the point of view of ionized outflows

2019 ◽  
Vol 15 (S356) ◽  
pp. 96-96
Author(s):  
Eleonora Sani
Keyword(s):  
Accretion Rate ◽  
Point Of View ◽  
Emission Lines ◽  
Black Hole Mass ◽  
X Ray ◽  
Bolometric Luminosity ◽  
Wide Range ◽  
Strong Contrast

AbstractI present a detailed study of ionized outflows in a large sample of 650 hard X-ray detected AGN. Taking advantage of the legacy value of the BAT AGN Spectroscopic Survey (BASS, DR1), we are able to reveal the faintest wings of the [OIII] emission lines associated with outflows. The sample allows us to derive the incidence of outflows covering a wide range of AGN bolometric luminosity and test how the outflow parameters are related with various AGN power tracers, such as black hole mass, Eddington ratio, luminosity. I’ll show how ionized outflows are more frequently found in type 1.9 and type 1 AGN (50% and 40%) with respect to the low fraction in type 2 AGN (20%). Within such a framework, I’ll demonstrate how type 2 AGN outflows are almost evenly balanced between blue- and red-shifted winds. This, in strong contrast with type 1 and type 1.9 AGN outflows which are almost exclusively blue-shifted. Finally, I’ll prove how the outflow occurrence is driven by the accretion rate, whereas the dependence of outflow properties with respect to the other AGN power tracers happens to be quite mild.

scholarly journals A New Measure of Complementarity in Market Basket Data

2021 ◽  
Vol 16 (4) ◽  
pp. 670-681
Author(s):  
Radosław Puka ◽  
Stanislaw Jedrusik
Keyword(s):  
Large Data ◽  
Point Of View ◽  
Detailed Data ◽  
Market Basket ◽  
Economic Theories ◽  
Empirical Verification ◽  
Preliminary Results ◽  
Research Fields ◽  
It Systems ◽  
Real Market

Modern IT systems collect detailed data on each activity, transaction, forum entry, conversation and many other areas. The availability of large data volumes in the business, industry and research fields opens up new opportunities for the empirical verification of various economic theories and laws. The analysis of big datasets in turn allows us to look at many issues from a new point of view and see the dependencies that are otherwise difficult to derive. In this paper, we propose a new measure for dependencies between goods in market basket data. The introduced measure was inspired by the well-known microeconomic concept of complementarity. Due to its similar properties to those of complementarity, the new measure was called basket complementarity (b-complementarity). B-complementarity not only measures the strength of dependencies between goods but also measures the direction of these dependencies. The values of the proposed measure can be relatively easily calculated using market basket data. This paper also presents a simple example illustrating this new concept, areas of possible application (e.g., in e-commerce) and preliminary results of searching for goods that meet the criteria of basket complementarity in real market basket data.

Sign in / Sign up

Export Citation Format

Share Document