scholarly journals Sustainable solutions for spa design, Dubai, United Arabic Emirates: building envelope optimization and impact energy evaluation

2010 ◽  
Author(s):  
D. Tanzj ◽  
C. Clemente ◽  
F. Cumo ◽  
G. Piras
Keyword(s):  
Impact Energy ◽  
Building Envelope ◽  
Sustainable Solutions ◽  
Energy Evaluation

scholarly journals A Sustainable Solution for Energy Efficiency in Italian Climatic Contexts

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2817
Author(s):  
Valeria Annibaldi ◽  
Federica Cucchiella ◽  
Marianna Rotilio
Keyword(s):  
Energy Efficiency ◽  
Life Cycle Cost ◽  
Energy Performance ◽  
Building Envelope ◽  
Reference Scenario ◽  
Life Cycle Cost Analysis ◽  
The European Union ◽  
Optimal Thickness ◽  
Hemp Fiber ◽  
Sustainable Solutions

In the European Union, about 40% of energy consumption and 36% of CO2 emissions come from buildings; therefore, the improvement of their energy performance is a strongly focused issue. In particular, the energy efficiency of the building envelope is a very important element to pay attention to. Many studies have been conducted on this field of research, and the study illustrated in this paper also belongs to this topic. In particular, this article presents a multidisciplinary method to find sustainable solutions for energy efficiency in Italian climatic contexts using the Life Cycle Cost Analysis approach. In detail, this paper defines the reference scenario and then deepens the methodology used to determine the economically optimal thickness of a specific insulating material—hemp fiber—applied to a specific type of wall—uninsulated cavity walls made of hollow bricks, which are very widespread in Italy. The analysis is developed in relation to three different regions—Piedmont, Abruzzo, and Campania. The results show that the economically optimal thickness is different for each region analyzed and demonstrates how energy efficiency strategies must be carefully weighed according to the specific conditions of the site.

scholarly journals Indoor Thermal Comfort Improvement through the Integrated BIM-Parametric Workflow-Based Sustainable Renovation of an Exemplary Apartment in Seoul, Korea

2019 ◽  
Vol 11 (14) ◽  
pp. 3950 ◽  
Author(s):  
Fabrizio M. Amoruso ◽  
Udo Dietrich ◽  
Thorsten Schuetze
Keyword(s):  
Thermal Comfort ◽  
Building Envelope ◽  
Energy Simulation ◽  
Information Modeling ◽  
Sustainable Solutions ◽  
Apartment Buildings ◽  
Rapid Economic Growth ◽  
Before And After ◽  
Building Information ◽  
Housing Typology

Apartment buildings are the most common housing typology in South Korea. The mass construction of apartment neighborhoods during a period of rapid economic growth (1970–1997) involved the minimization of material use and quality, as well as industrialized construction processes. Accordingly, apartment buildings require essential renovation after only 20 years of operation. This study focuses on the improvement of thermal comfort for the renovation of an exemplary apartment building based on an integrated Building Information Modeling (BIM) and parametric software framework. The existing apartment was reconstructed with BIM software, and the virtual model was utilized for a parametric building energy simulation to calculate the thermal comfort condition of occupants during the entire year. The thermal comfort analysis results defined the criteria for the development of an enhanced building envelope system characterized by modular panels. The parametric energy simulation was executed for the renovated apartment condition with the enhanced envelope system, and the thermal comfort improvements were quantified by comparing the results for the apartment condition before and after renovation. This study aims to provide the tools and criteria for the comfort analysis of apartment occupants, as well as propose sustainable solutions for the improvement of thermal comfort in aged buildings with similar conditions, internal distribution, and construction components.

The effects of layers orientation on impact energy evaluation of FDM printed specimens

2021 ◽  
Author(s):  
Iulian‐Ionut Ailinei ◽  
Sergiu Valentin Galatanu ◽  
Liviu Marsavina
Keyword(s):  
Impact Energy ◽  
Energy Evaluation

Impact Energy Evaluation of Natural Castor Oil Polyurethane Matrix Composites Reinforced with Jute Fabric

2019 ◽  
pp. 63-68
Author(s):  
José Gustavo de Almeida Machado ◽  
Juliana Peixoto Rufino Gazem de Carvalho ◽  
Anna Carolina Cerqueira Neves ◽  
Felipe Perissé Duarte Lopes ◽  
Sérgio Neves Monteiro ◽  
...  
Keyword(s):  
Impact Energy ◽  
Castor Oil ◽  
Matrix Composites ◽  
Jute Fabric ◽  
Energy Evaluation ◽  
Polyurethane Matrix

Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties

2018 ◽  
Vol 115 (4) ◽  
pp. 407 ◽  
Author(s):  
Annika Eggbauer Vieweg ◽  
Gerald Ressel ◽  
Peter Raninger ◽  
Petri Prevedel ◽  
Stefan Marsoner ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Energy ◽  
Charpy Impact ◽  
Heat Treating ◽  
Processing Route ◽  
High Heating Rate ◽  
Heating Rates ◽  
High Heating ◽  
Tempering Treatment ◽  
Carbide Distribution

Induction heating processes are of rising interest within the heat treating industry. Using inductive tempering, a lot of production time can be saved compared to a conventional tempering treatment. However, it is not completely understood how fast inductive processes influence the quenched and tempered microstructure and the corresponding mechanical properties. The aim of this work is to highlight differences between inductive and conventional tempering processes and to suggest a possible processing route which results in optimized microstructures, as well as desirable mechanical properties. Therefore, the present work evaluates the influencing factors of high heating rates to tempering temperatures on the microstructure as well as hardness and Charpy impact energy. To this end, after quenching a 50CrMo4 steel three different induction tempering processes are carried out and the resulting properties are subsequently compared to a conventional tempering process. The results indicate that notch impact energy raises with increasing heating rates to tempering when realizing the same hardness of the samples. The positive effect of high heating rate on toughness is traced back to smaller carbide sizes, as well as smaller carbide spacing and more uniform carbide distribution over the sample.

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

Determinants and barriers of PV self-consumption in Spain from the perception of the installers for the promotion of distributed energy systems

2020 ◽  
pp. 153-169
Author(s):  
José Ángel Gimeno ◽  
Eva Llera Sastresa ◽  
Sabina Scarpellini
Keyword(s):  
European Union ◽  
Energy Transition ◽  
Legal Framework ◽  
Low Carbon ◽  
The European Union ◽  
Distributed Energy ◽  
Sustainable Solutions ◽  
Highly Sensitive ◽  
Transition Scenario

Currently, self-consumption and distributed energy facilities are considered as viable and sustainable solutions in the energy transition scenario within the European Union. In a low carbon society, the exploitation of renewables for self-consumption is closely tied to the energy market at the territorial level, in search of a compromise between competitiveness and the sustainable exploitation of resources. Investments in these facilities are highly sensitive to the existence of favourable conditions at the territorial level, and the energy policies adopted in the European Union have contributed positively to the distributed renewables development and the reduction of their costs in the last decade. However, the number of the installed facilities is uneven in the European Countries and those factors that are more determinant for the investments in self-consumption are still under investigation. In this scenario, this paper presents the main results obtained through the analysis of the determinants in self-consumption investments from a case study in Spain, where the penetration of this type of facilities is being less relevant than in other countries. As a novelty of this study, the main influential drivers and barriers in self-consumption are classified and analysed from the installers' perspective. On the basis of the information obtained from the installers involved in the installation of these facilities, incentives and barriers are analysed within the existing legal framework and the potential specific lines of the promotion for the effective deployment of self-consumption in an energy transition scenario.

Sign in / Sign up

Export Citation Format

Share Document