Permanent Shape Change of Thin-Ply Composites

2022 ◽  
Author(s):  
Milinda M. Yapa Hamillage ◽  
Wolfgang J. Klimm ◽  
Kawai Kwok
Keyword(s):  
Shape Change ◽  
Permanent Shape

scholarly journals Creep and Material Design

2012 ◽  
Vol 9 (1) ◽  
pp. 169-171
Author(s):  
Ram Oruganti
Keyword(s):  
High Temperature ◽  
Creep Resistance ◽  
Room Temperature ◽  
Shape Change ◽  
Creep Damage ◽  
Material Design ◽  
The Other ◽  
Permanent Shape ◽  
Total Life

When a material is subjected to temperature and stress, it deforms slowly resulting in permanent shape change. If the same amount of stress were applied at room temperature, the material would not budge. This deformation at high temperature under low stresses is called creep. This phenomenon is important for OEM’S like GE etc. since turbine components are exposed to low stress and high temperature and the resulting shape change is not a desirable consequence. Apart from the change in shape, the components can eventually rupture leading to catastrophic consequences. So it is imperative that the nature of this phenomenon is understood well. Some of the questions to be answered are 1) What makes one material more resistant to creep that the other 2) How can a material’s creep resistance be improved 3) How can the current creep damage in a component be measured 4) Is it possible to say what fraction of the total life of a component has been consumed by creep.

Modeling Circular Shear in Shape Memory Polymers With Triple Shape Effect Subjected to Crystallization Under Constant Shear

2015 ◽  
Author(s):  
Swapnil Moon ◽  
I. Joga Rao ◽  
Fangda Cui
Keyword(s):  
Shape Memory ◽  
Smart Materials ◽  
First Generation ◽  
Shape Change ◽  
Shape Memory Polymers ◽  
Shape Effect ◽  
Crystalline Phases ◽  
Thermally Induced ◽  
Multiple Natural Configurations ◽  
Permanent Shape

The capacity of a material to sense its environment and to change its shape on demand in a predefined way has tremendous technological significance for a wide variety of application areas. Shape memory polymers (SMPs) belong to this category of smart materials as they have the ability to undergo a shape change in a predetermined manner under the influence of an external stimulus. SMPs can recover their permanent shape after undergoing large deformation to a temporary shape on exposure to external triggers such as light, PH values and heat. Thermally induced SMPs are first generation SMPs and have been widely recognized. Crystallizable SMPs are a class of thermally induced SMPs whose temporary shape is due to formation of crystalline phases, and they will revert back to their permanent shape when the crystallization phase is melted through heating. Traditional crystallizable SMPs can only perform dual-shape memory cycles and this limits applications of crystallizable SMPs. Recently SMPs with triple shape effect have been reported that can switch from a second temporary shape to the first temporary shape and from there to the permanent shape under stimulation by heat. Our research focuses on modeling the mechanical behavior of these SMPs with triple-shape effect. The framework used in developing the model is built upon the theory of multiple natural configurations [3]. In order to model the mechanics associated with these polymers different stages of the shape fixation and recovery cycle and different phases of the material during this cycle need to be characterized. This includes developing a model for the amorphous phase and the subsequent semi-crystalline phases with different stress free states and melting of these phases. The model subsequently has been used to simulate results for a typical deformation cycle involving circular shear.

Role of spectrin in membrane fusion and in shape change of human erythrocyte ghost

1978 ◽  
Vol 36 (2) ◽  
pp. 328-329
Author(s):  
Hideo Hayashi ◽  
Yoshikazu Hirai ◽  
John T. Penniston
Keyword(s):  
Conformational Changes ◽  
Human Erythrocyte ◽  
Shape Change ◽  
Membrane Surface ◽  
Slight Modification ◽  
Active Role ◽  
Main Role ◽  
Bank Blood ◽  
Human Erythrocyte Ghost

Spectrin is a membrane associated protein most of which properties have been tentatively elucidated. A main role of the protein has been assumed to give a supporting structure to inside of the membrane. As reported previously, however, the isolated spectrin molecule underwent self assemble to form such as fibrous, meshwork, dispersed or aggregated arrangements depending upon the buffer suspended and was suggested to play an active role in the membrane conformational changes. In this study, the role of spectrin and actin was examined in terms of the molecular arrangements on the erythrocyte membrane surface with correlation to the functional states of the ghosts.Human erythrocyte ghosts were prepared from either freshly drawn or stocked bank blood by the method of Dodge et al with a slight modification as described before. Anti-spectrin antibody was raised against rabbit by injection of purified spectrin and partially purified.

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

1988 ◽  
Vol 46 ◽  
pp. 582-583
Author(s):  
C. J. Chan ◽  
K. R. Venkatachari ◽  
W. M. Kriven ◽  
J. F. Young
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Shape Change ◽  
Microstructural Characterization ◽  
Particle Size Effect ◽  
Dicalcium Silicate ◽  
Laser Melting ◽  
Uniform Size ◽  
Cell Shape Change ◽  
Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Conditions Affecting the Responses of Human Platelets to Epinephrine

1988 ◽  
Vol 60 (02) ◽  
pp. 209-216 ◽  
Author(s):  
Chantal Lalau Keraly ◽  
Raelene L Kinlough-Rathbone ◽  
Marian A Packham ◽  
Hidenori Suzuki ◽  
J Fraser Mustard
Keyword(s):  
Platelet Rich Plasma ◽  
Shape Change ◽  
Human Platelets ◽  
Dense Granule ◽  
Primary Phase ◽  
Lag Phase ◽  
Acid Citrate Dextrose ◽  
Two Phases ◽  
Citrate Dextrose ◽  
Thromboxane Formation

SummaryConditions affecting the responses of human platelets to epinephrine were examined. In platelet-rich plasma prepared from blood anticoagulated with hirudin or PPACK (D-pheny- lalanyl-L-prolyl-L-arginine chloromethyl ketone), epinephrine did not cause shape change or aggregation. In a Tyrode-albumin- apyrase solution containing a concentration of Ca2+ in the physiological range, and fibrinogen, epinephrine in concentrations as high as 40 μM did not induce platelet shape change, caused either no primary aggregation or very slight primary aggregation, and did not induce thromboxane formation, release of dense granule contents, or secondary aggregation. In contrast, in citrated platelet-rich plasma, epinephrine induced two phases of aggregation. This is not attributable to the generation of traces of thrombin since the same effects were evident when blood was taken into a combined citrate-hirudin anticoagulant or a combined citrate-PPACK anticoagulant. In a modified Tyrode-albu- min-apyrase solution containing approximately 20 μM Ca2+, 1 mM Mg2+, and fibrinogen, epinephrine induced extensive aggregation after a lag phase, but no primary phase was evident; thromboxane formation and release of dense granule contents accompanied the aggregation response. These responses were also observed when PPACK was included with the acid-citrate- dextrose anticoagulant, and in the washing and resuspending fluids. In the presence of aspirin or the thromboxane receptor blocker BM 13.177 a few small aggregates were detected by particle counting and by scanning electron microscopy; with the latter inhibitor, the platelets in the aggregates retained their disc shape; secondary aggregation and the responses associated with it did not occur. Thus thromboxane A2 formation is not necessary for the formation of these small aggregates, but is required for extensive aggregation and release. As with other weak agonists, the close platelet-to-platelet contact in the low Ca2+ medium appears to be necessary for full secondary aggregation. Omission of fibrinogen from the low Ca2+ medium prevented both primary and secondary aggregation in response to epinephrine. An antibody (10E5) to the glycoprotein Ilb/IIIa complex was completely inhibitory in the presence of fibrinogen. Thus the response of human platelets to epinephrine is influenced by the concentration of Ca2+ and the presence of fibrinogen in the medium in which they are suspended.

Increased Aggregation and Secretion Responses of Human Platelets when Loaded with the Calcium Fluorescent Probes Quin2 and Fura-2

1987 ◽  
Vol 58 (02) ◽  
pp. 737-743 ◽  
Author(s):  
Frarnçois Lanza ◽  
Alain Beretz ◽  
Martial Kubina ◽  
Jean-Pierre Cazenave
Keyword(s):  
Intracellular Calcium ◽  
Shape Change ◽  
Calcium Ionophore ◽  
Human Platelets ◽  
Arachidonic Acid Metabolism ◽  
Free Calcium ◽  
Membrane Bilayer ◽  
Fluorescent Indicators ◽  
Fura 2 ◽  
Low Concentrations

SummaryIncorporation into human platelets of the calcium fluorescent indicators quin2 or fura-2 at low concentrations used to measure intracellular free calcium leads to the potentiation of the effects of agonists on platelets. This was shown by increased aggregatory and secretory responses of quin2 or fura-2 loaded platelets after stimulation with ADP, PAP and with low concentrations of thrombin, collagen, the endoperoxide analog U-46619 and the calcium ionophore A 23187. Quin2 and fura-2 mediated platelet sensitisation could be due to altered arachidonic acid metabolism since it was inhibited by prior treatment with the cydooxygenase inhibitor acetylsalicylate. In contrast, platelets loaded with higher concentrations of calcium chelators exhibited diminished aggregation responses to all aggregating agents. This latter effect was accompanied by increased fluidity of the platelet plasma membrane bilayer and by the exposure of a new pool of membranes to the outer surface of platelets, as monitored with trimethylammonium- diphenylhexatriene (TMA-DPH) in platelets loaded with the non-fluorescent calcium probe analog MAPT. In contrast, low concentrations of quin2 did not potentiate shape change of platelets activated with ADP. Thus, shape change and aggregation can be influenced separately by intracellular Ca2+ chelators. We conclude that platelet responses are altered by the incorporation of intracellular calcium chelators at concentrations used to monitor intracellular calcium changes.

Reaction of Acetaldehyde with Human Platelets

1992 ◽  
Vol 67 (01) ◽  
pp. 126-130 ◽  
Author(s):  
Olivier Spertini ◽  
Jacques Hauert ◽  
Fedor Bachmann
Keyword(s):  
Platelet Aggregation ◽  
Inhibitory Action ◽  
Ex Vivo ◽  
Platelet Rich Plasma ◽  
Shape Change ◽  
Reaction Medium ◽  
Human Platelets ◽  
Membrane Glycoproteins ◽  
Neutral Ph

SummaryPlatelet function defects observed in chronic alcoholics are not wholly explained by the inhibitory action of ethanol on platelet aggregation; they are not completely reproduced either in vivo by short-term ethanol perfusion into volunteers or in vitro by the addition of ethanol to platelet-rich plasma. As acetaldehyde (AcH) binds to many proteins and impairs cellular activities, we investigated the effect of this early degradation product of ethanol on platelets. AcH formed adducts with human platelets at neutral pH at 37° C which were stable to extensive washing, trichloracetic acid hydrolysis and heating at 100° C, and were not reduced by sodium borohydride. The amount of platelet adducts formed was a function of the incubation time and of the concentration of AcH in the reaction medium. At low AcH concentrations (<0.2 mM), platelet bound AcH was directly proportional to the concentration of AcH in the reaction medium. At higher concentrations (≥0.2 mM), AcH uptake by platelets tended to reach a plateau. The amount of adducts was also proportional to the number of exposures of platelets to pulses of 20 pM AcH.AcH adducts formation severely impaired platelet aggregation and shape change induced by ADP, collagen and thrombin. A positive correlation was established between platelet-bound AcH and inhibition of aggregation.SDS-PAGE analysis of AcH adducts at neutral pH demonstrated the binding of [14C]acetaldehyde to many platelet proteins. AcH adduct formation with membrane glycoproteins, cytoskeleton and enzymes might interfere with several steps of platelet activation and impair platelet aggregation.This in vitro study shows that AcH has a major inhibitory action on platelet aggregation and may account for the prolonged ex vivo inhibition of aggregation observed in chronic alcoholics even in the absence of alcoholemia.

Trimucytin: A Collagen-Like Aggregating Inducer Isolated from Trimeresurus mucrosquamatus Snake Venom

1993 ◽  
Vol 69 (03) ◽  
pp. 286-292 ◽  
Author(s):  
Che-Ming Teng ◽  
Feng-Nien Ko ◽  
Inn-Ho Tsai ◽  
Man-Ling Hung ◽  
Tur-Fu Huang
Keyword(s):  
Platelet Aggregation ◽  
Snake Venom ◽  
Inositol Phosphate ◽  
Shape Change ◽  
Platelet Activating Factor ◽  
Atp Release ◽  
Platelet Membrane ◽  
Thromboxane B2 ◽  
Dependent Manner ◽  
Concentration Dependent Manner

SummaryTrimucytin is a potent platelet aggregation inducer isolated from Trimeresurus mucrosquamatus snake venom. Similar to collagen, trimucytin has a run of (Gly-Pro-X) repeats at the N-terminal amino acids sequence. It induced platelet aggregation, ATP release and thromboxane formation in rabbit platelets in a concentration-dependent manner. The aggregation was not due to released ADP since it was not suppressed by creatine phosphate/creatine phosphokinase. It was not either due to thromboxane A2 formation because indomethacin and BW755C did not have any effect on the aggregation even thromboxane B2 formation was completely abolished by indomethacin. Platelet-activating factor (PAF) was not involved in the aggregation since a PAF antagonist, kadsurenone, did not affect. However, RGD-containing peptide triflavin inhibited the aggregation, but not the release of ATP, of platelets induced by trimucytin. Indomethacin, mepacrine, prostaglandin E1 and tetracaine inhibited the thromboxane B2 formation of platelets caused by collagen and trimucytin. Forskolin and sodium nitroprusside inhibited both platelet aggregation and ATP release, but not the shape change induced by trimucytin. In quin-2 loaded platelets, the rise of intracellular calcium concentration caused by trimucytin was decreased by 12-O-tetradecanoyl phorbol-13 acetate, imipramine, TMB-8 and indomethacin. In the absence of extracellular calcium, both collagen and trimucytin caused no thromboxane B2 formation, but still induced ATP release which was completely blocked by R 59022. Inositol phosphate formation in platelets was markedly enhanced by trimucytin and collagen. MAB1988, an antibody against platelet membrane glycoprotein Ia, inhibited trimucytinand collagen-induced platelet aggregation and ATP release. However, trimucytin did not replace the binding of 125I-labeled MAB1988 to platelets. Platelets pre-exposed to trimucytin were resistant to the second challenge with trimucytin itself or collagen. It is concluded that trimucytin may activate collagen receptors on platelet membrane, and cause aggregation and release mainly through phospholipase C-phosphoinositide pathway.

Stimulated Glanzmann’s Thrombasthenia Platelets Produce Microvesicles

1995 ◽  
Vol 74 (06) ◽  
pp. 1533-1540 ◽  
Author(s):  
Pål André Holme ◽  
Nils Olav Solum ◽  
Frank Brosstad ◽  
Nils Egberg ◽  
Tomas L Lindahl
Keyword(s):  
Complement System ◽  
Shape Change ◽  
Annexin V ◽  
Platelet Surface ◽  
Glanzmann’S Thrombasthenia ◽  
Large Numbers ◽  
Glanzmann's Thrombasthenia ◽  
Series Of Experiments ◽  
The Complement System ◽  
Number Of Particles

SummaryThe mechanism of formation of platelet-derived microvesicles remains controversial.The aim of the present work was to study the formation of microvesicles in view of a possible involvement of the GPIIb-IIIa complex, and of exposure of negatively charged phospholipids as procoagulant material on the platelet surface. This was studied in blood from three Glanzmann’s thrombasthenia patients lacking GPIIb-IIIa and healthy blood donors. MAb FN52 against CD9 which activates the complement system and produces microvesicles due to a membrane permeabilization, ADP (9.37 μM), and the thrombin receptor agonist peptide SFLLRN (100 μM) that activates platelets via G-proteins were used as inducers. In a series of experiments platelets were also preincubated with PGE1 (20 μM). The number of liberated microvesicles, as per cent of the total number of particles (including platelets), was measured using flow cytometry with FITC conjugated antibodies against GPIIIa or GPIb. Activation of GPIIb-IIIa was detected as binding of PAC-1, and exposure of aminophospholipids as binding of annexin V. With normal donors, activation of the complement system induced a reversible PAC-1 binding during shape change. A massive binding of annexin V was seen during shape change as an irreversible process, as well as formation of large numbers of microvesicles (60.6 ±2.7%) which continued after reversal of the PAC-1 binding. Preincubation with PGE1 did not prevent binding of annexin V, nor formation of microvesicles (49.5 ± 2.7%), but abolished shape change and PAC-1 binding after complement activation. Thrombasthenic platelets behaved like normal platelets after activation of complement except for lack of PAC-1 binding (also with regard to the effect of PGE1 and microvesicle formation). Stimulation of normal platelets with 100 μM SFLLRN gave 16.3 ± 1.2% microvesicles, and strong PAC-1 and annexin V binding. After preincubation with PGE1 neither PAC-1 nor annexin V binding, nor any significant amount of microvesicles could be detected. SFLLRN activation of the thrombasthenic platelets produced a small but significant number of microvesicles (6.4 ± 0.8%). Incubation of thrombasthenic platelets with SFLLRN after preincubation with PGE1, gave results identical to those of normal platelets. ADP activation of normal platelets gave PAC-1 binding, but no significant annexin V labelling, nor production of microvesicles. Thus, different inducers of the shedding of microvesicles seem to act by different mechanisms. For all inducers there was a strong correlation between the exposure of procoagulant surface and formation of microvesicles, suggesting that the mechanism of microvesicle formation is linked to the exposure of aminophospholipids. The results also show that the GPIIb-IIIa complex is not required for formation of microvesicles after activation of the complement system, but seems to be of importance, but not absolutely required, after stimulation with SFLLRN.

Physiological Effects of Nonimmune Platelet Associated Immunoglobulin G

1981 ◽  
Vol 45 (01) ◽  
pp. 027-033 ◽  
Author(s):  
K Sugiura ◽  
M Steiner ◽  
M Baldini
Keyword(s):  
Shape Change ◽  
Fluorescein Isothiocyanate ◽  
Recovery Phase ◽  
Human Platelets ◽  
Serotonin Release ◽  
Platelet Volume ◽  
Igg Antibody ◽  
Heterologous Antiserum ◽  
Igg Binding ◽  
Series Of Experiments

SummaryThe function of nonimmune IgG associated with platelets is unknown. In a series of experiments we have investigated this problem, relating amount of platelet-associated IgG (PAIgG) to platelet volume, serotonin release, adherence of platelets to monocytes and platelet senescence. Most of these studies were performed with human platelets. Platelets freed of preexisting PAIgG by incubation at 22° C were incubated with IgG in a series of concentrations ranging from 0.4 — 27.0 X10-6 M. The IgG preparations used were demonstrably free of aggregated forms of the protein. The amount of PAIgG bound to platelets was determined by the use of fluorescein isothiocyanate-conjugated anti-IgG antibody (F-anti-IgG antibody) which was quantified in a fluorospectrophotometer. Newly bound IgG was assayed similarly by the use of F-IgG. A dose-dependent increase in platelet volume was associated with the binding of nonimmune IgG by platelets. The process which leveled off at an IgG concentration of 1.2 —1.5 X10-5 M was almost fully reversible and was not due to platelet shape change or aggregation. Release of serotonin from IgG-treated platelets was relatively small but to the extent that it occurred was positively related to the IgG concentration to which platelets were exposed. Adherence to autologous monocytes studied quantitatively by the use of formaldehyde-fixed cells was also positively related to the amount of IgG on the platelets. Normal or IgG-defident serum had a potent inhibitory (noncompetitive) action on the binding of F-IgG and F-anti-human IgG antibody to human platelets. Cohorts of platelets prepared in rabbits during the recovery phase of immunological thrombocytopenia induced by injection of heterologous antiserum, showed an age-dependent increase of PAIgG and of IgG binding. These results suggest that PAIgG plays a role in the clearance of senescent platelets.

Sign in / Sign up

Export Citation Format

Share Document