A NOVEL RECTANGULAR SLOT ANTENNA WITH EMBEDDED SELF-SIMILAR T-SHAPED STRIPS FOR WLAN APPLICATIONS

2010 ◽  
Vol 15 ◽  
pp. 19-26 ◽  
Author(s):  
Le Kang ◽  
Ying-Zeng Yin ◽  
Shou-Tao Fan ◽  
Shi-Ju Wei
Keyword(s):  
Slot Antenna ◽  
Rectangular Slot ◽  
Self Similar

scholarly journals Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application

2005 ◽  
Vol 3 ◽  
pp. 143-146
Author(s):  
C. Löcker ◽  
T. Vaupel ◽  
T. F. Eibert
Keyword(s):  
Parallel Plate ◽  
Radiation Efficiency ◽  
Slot Antenna ◽  
Coupling Coefficients ◽  
Rectangular Slot ◽  
Mode Suppression ◽  
Low Profile ◽  
Shorting Pin ◽  
Strong Excitation ◽  
Back Reflector

Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

Arrow Patch-Slot Antenna for 5G Lower Frequency Band Communications

2021 ◽  
Vol 35 (11) ◽  
pp. 1418-1419
Author(s):  
Yuhao Feng ◽  
Yiming Chen ◽  
Atef Elsherbeni ◽  
Khalid Alharbi
Keyword(s):  
Antenna Arrays ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Base Stations ◽  
Slot Antenna ◽  
Main Beam ◽  
Antenna Element ◽  
Single Element ◽  
Rectangular Slot ◽  
Compact Size

A compact size arrow shaped patch in a rectangular slot antenna is designed for 5G communications in the lower 3 to 6 GHz band. The antenna element is fed through a coplanar waveguide with partial ground plane for better impedance matching with 50 Ohms across the entire band. The maximum gain of a single element is 3.8 dB at 3.7 GHz, while for linear arrays of 5 and 15 elements with uniform excitation the maximum gains are 10.9 dB and 16 dB, respectively. The 5 and 15 elements arrays provide scanning range with no significant degradation of the main beam up to 30˚ and 45˚, respectively. The properties of this antenna element makes it suitable for 5G wireless mobile devices and miniaturized base stations antenna arrays.

Polarization Reconfigurable Dual-Band Rectangular Slot Antenna

Frequenz ◽  
2019 ◽  
Vol 73 (9-10) ◽  
pp. 339-351
Author(s):  
Rohit Kumar Saini
Keyword(s):  
Circular Polarization ◽  
Linear Polarization ◽  
Dual Band ◽  
Slot Antenna ◽  
Pin Diodes ◽  
Rectangular Slot ◽  
Left Hand ◽  
Right Hand ◽  
Lower Band ◽  
The Senses

Abstract A novel dual-band rectangular slot antenna is presented for dual-sense reconfigurable polarization. A W-shaped microstrip feedline and two rectangular parasitic patches are used to obtain dual-band circular polarization. Further, the feedline is modified so that the senses of polarization at the two bands are opposite. By introducing PIN-diodes in the feed lines, polarization can be switched among left-hand circular polarization (LHCP), right-hand circular polarization (RHCP), and linear polarization (LP). A prototype dual-band dual-sense antenna with f01 = 1.9 GHz and f02 = 3.45 GHz is fabricated in a 1.6 mm thick FR4 substrate. The measured circular polarized bandwidths are more than 7.6 % for the lower band and 5 % for the upper band.

Rectangular Slot Antenna with Asymmetrical Conductor Strip for Bandwidth Enhancement Coverage UWB Standard

2014 ◽  
pp. 105-115 ◽  
Author(s):  
Tuanjai Archevapanich ◽  
Paitoon Rakluea ◽  
Noppin Anantrasirichai ◽  
Boonchana Purahong ◽  
Vanvisa Chutchavong
Keyword(s):  
Slot Antenna ◽  
Bandwidth Enhancement ◽  
Rectangular Slot ◽  
Conductor Strip

scholarly journals Wideband Printed Antenna Design Using a Shape Blending Algorithm

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Aiting Wu ◽  
Zhonghai Zhang ◽  
Boran Guan
Keyword(s):  
Optimization Method ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Printed Antenna ◽  
Rectangular Slot ◽  
Design And Optimization ◽  
Shape Blending ◽  
The Impact ◽  
Good Agreement

The shape of the tuning stub of the wide slot printed antenna is an important factor which affects the antenna’s performances. In this paper, a new design and optimization method of wideband printed slot antenna using a shape blending algorithm is presented. The proposed antenna consists of a wide rectangular slot and a tuning stub, whose profile is formed by the shape blending outcome from a pie and a diamond shape. The method is used to design an ultra-wideband antenna. The impact on the impedance bandwidth through the antenna geometry change with the different shape blending results has been investigated and analyzed. To verify the proposed design, the antenna prototype was designed, fabricated, and measured. The measured results are compared with the simulation and show good agreement.

Sign in / Sign up

Export Citation Format

Share Document