FEATURES OF USING A GROUND LASER PROFILER TO ASSESS THE QUALITY OF SOIL CULTIVATION ON AGRICULTURAL SLOPE LANDSCAPES

2021 ◽  
pp. 16-23
Author(s):  
SERGEY A. VASILIEV ◽  
◽  
VIKTOR А. ALEKSEEV ◽  
MIKHAIL A. VASILIEV ◽  
ALEKSEI A. VASILIEV ◽  
...  
Keyword(s):  
Catchment Area ◽  
Soil Aggregates ◽  
Weighted Average ◽  
Software Tool ◽  
Average Diameter ◽  
Surface Slope ◽  
Cultivated Soil ◽  
Chuvash Republic ◽  
Equal Height

The authors analyze an extensive set of data for measuring the daily surface profi le of the cultivated soil to assess its agrotechnical parameters. The research was carried out on a small agricultural catchment area of the Orininsky rural settlement, which is located in the Morgaushy district of the Chuvash Republic. Three agricultural fi elds were selected, ranging from 25 ha to 53 ha. The studied areas were cultivated in various ways: plowing with harrowing, disking the soil and winter plowing. The profi les of the studied elementary sections were measured using a developed ground-based circular laser profi lometer. Data on the state of the profi le were used to determine the main agrotechnical parameters - clumping, cloddiness, surface slope, and deviation of the travel trajectory of a machine and tractor unit from the line of equal height. A software tool for processing and analyzing data received from sensors has been developed. The results established that the deviation of the projection of the greatest elevation line changes (measured by the slope) from the travel trajectory of a unit with an angle of 62, a slope of 6.5, and in a quantitative size distribution soil aggregates of 1…4 inches in diameter prevail. The weighted average diameter of the clods was 3.99 cm. The research results have determined the use of recommend methods for stating the agrotechnical parameters of the daylight surface to evaluate the cultivated soil in accordance with agrotechnical requirements.

scholarly journals Biomass Productivity of Different Winter Cover Crops and Their Effect on Soil Physical Properties

2020 ◽  
Vol 12 (10) ◽  
pp. 338
Author(s):  
Willian dos Reis ◽  
Monica C. Sustakowski ◽  
Edleusa P. Seidel ◽  
Maria do C. Lana ◽  
Renata F. Barabasz ◽  
...  
Keyword(s):  
Cover Crops ◽  
Dry Matter ◽  
Soil Aggregates ◽  
Geometric Mean ◽  
Weighted Average ◽  
Biomass Productivity ◽  
Total Porosity ◽  
Average Diameter ◽  
Soil Density ◽  
Common Vetch

The cultivation of cover crops is a vegetative practice considered an alternative for sustainable soil management, due to its beneficial action in different aspects of soil properties. Thus, the present work aimed to evaluate the effect of cultivation of different species of cover crops on soil density, porosity and diameter of soil aggregates. The experimental design was in randomized blocks, with four replications. The treatments consisted of four species of winter green manure: black oat, forage turnip, forage pea, and common vetch, a consortium of black oat + forage turnip and area kept fallow (control). The following evaluations were performed: dry matter production of cover crops, macroporosity, microporosity, total porosity, soil density, geometric mean diameter and weighted average diameter. The cultivation with forage turnip and the consortium of black oat + forage turnip presented higher dry matter productivity, decreased soil density, increased soil porosity, improved the distribution in relation to macropores and aggregate stability.

scholarly journals Aggregation Index in Representative Soils of the Paraiba State

2021 ◽  
Vol 9 (7) ◽  
pp. 266-281
Author(s):  
Petrus Luiz de Luna Pequeno ◽  
Flávio Pereida de Oliveira ◽  
Viviane Barrozo da Silva ◽  
Antonio Carlos Duarte Ricciotti ◽  
Jairo André Schlindwein ◽  
...  
Keyword(s):  
Soil Aggregates ◽  
Weighted Average ◽  
Stability Index ◽  
Average Diameter ◽  
Soil Samples ◽  
Chemical Parameters ◽  
Aggregation Index ◽  
Soil Class ◽  
The Stability ◽  
Wet Sieving

The stability of soil aggregates is an important physical parameter as it mainly influences the flow of water and air in the soil. In this sence, the research aimed to determine the stability aggregates index in six representative soil classes in the Paraíba State-Brazil at different stages of pedological development. The soil classes analyzed is localized on the Microregions of the Curimataú Occidental (Ferrasol, Planosol, Leptosol, Arenosol) and Brejo Paraibano (Acrisol, Lixisol), on the Paraíba state, Brazil. At depths of 0-5 cm, 5-10 cm and 10-20 cm was collected three undeformed soil samples were collected per mini trench (one per depth), making a total of 15 samples per soil class and 90 total samples.  In each soil class was analysed: chemical parameters, granulometrics parameters, stability of agregates,  Weighted average diameter via wet sieving (DMPAu) and Weighted average diameter via dry sieving (DMPAs); agregate stability index (IEA). For the conditions that research was developed can conclude that: The IEA values tended to increase with clay contents in all soil classes; Among the less developed soils, the IEA values were better in the  Planosol soil, denoting that there is a probable relationship with the low contents of K, Na and Al; In the more developed soils, the high values of Na and Al may have contributed to the lower IEA in the PVd, while the lower values may have contributed to the higher IEA in Ferrasol and Lixisol soils.

scholarly journals Fast immersion to test the stability of aggregates in water: consequences for interpreting results from tropical soil classes

2019 ◽  
Vol 42 ◽  
pp. e42453
Author(s):  
Rodrigo Fonseca da Silva ◽  
Patriciani Estela Cipriano ◽  
Matias Siueia Junior ◽  
Geslin Mars ◽  
Moacir de Souza Dias Junior
Keyword(s):  
Soil Aggregates ◽  
Geometric Mean ◽  
Weighted Average ◽  
Aggregate Stability ◽  
Stability Index ◽  
Average Diameter ◽  
Tropical Soils ◽  
Organic Carbon Content ◽  
Pre Treatment ◽  
High Organic Carbon Content

Aggregates are the primary structural components of soil and have been used as an indicator of soil quality in conservation systems. The objective of this study was to analyse the effect of slow pre-wetting on the results of the aggregate stability test for different classes of tropical soils. Data were arranged in a 2 x 4 factorial design with three replications, in which the first factor comprised the two methods of pre-treatment on soil aggregates: without pre-wetting (WOPW), which considered the moisture of the aggregates in the field, and with pre-wetting (WPW), which considered the slow wetting of aggregates through capillarity on wet filter paper for 24h. The second factor consisted of four soil classes: Typic Dystrustept (Cambissolo Aplico distrófico in Embrapa), Typic Hapludult (Argissolo Amarelo distrófico), Rhodic Kandiudult (Nitossolo Vermelho distrófico), and Anionic Acrudox (Latossolo Vermelho distróferrico) and considered horizons A and B. The pre-wetting significantly increased the values of the weighted average diameter, geometric mean diameter and aggregate stability index. In soils with high organic carbon content, the practice of pre-moistening did not provide variation in aggregation.

First flush effects in an urban catchment area in Aalborg

1998 ◽  
Vol 37 (1) ◽  
pp. 251-257 ◽  
Author(s):  
Torben Larsen ◽  
Kirsten Broch ◽  
Margit Riis Andersen
Keyword(s):  
Water Quality ◽  
Catchment Area ◽  
Quality Parameters ◽  
Average Concentration ◽  
First Flush ◽  
Storm Events ◽  
Urban Catchment ◽  
Discharge Measurements ◽  
Quality Measurements

The paper describes the results of measurements from a 2 year period on a 95 hectare urban catchment in Aalborg, Denmark. The results of the rain/discharge measurements include 160 storm events corresponding to an accumulated rain depth of totally 753 mm. The water quality measurements include 15 events with time series of concentration of SS, COD, BOD, total nitrogen and total phosphorus. The quality parameters showed significant first flush effects. The paper discusses whether either the event average concentration or the accumulated event mass is the most appropriate way to characterize the quality of the outflow.

scholarly journals Simple fistula-in-ano: is it all simple? A systematic review

2021 ◽  
Author(s):  
F. Litta ◽  
A. Parello ◽  
L. Ferri ◽  
N. O. Torrecilla ◽  
A. A. Marra ◽  
...  
Keyword(s):  
Systematic Review ◽  
Surgical Treatment ◽  
Fecal Incontinence ◽  
Anal Fistula ◽  
Randomized Clinical Trials ◽  
Weighted Average ◽  
Anal Fistulas ◽  
Postoperative Continence ◽  
Average Success Rate

Abstract Background Simple anal fistula is one of the most common causes of proctological surgery and fistulotomy is considered the gold standard. This procedure, however, may cause complications. The aim of this systematic review was to assess the surgical treatment of simple anal fistula with traditional and sphincter-sparing techniques. Methods A literature research was performed using PubMed, Cochrane, and Google Scholar to identify studies on the surgical treatment of simple anal fistulas. Observational studies and randomized clinical trials were included. We assessed the risk of bias of included studies using the Jadad scale for randomized controlled trials, and the MINORS Scale for the remaining studies. Results The search returned 456 records, and 66 studies were found to be eligible. The quality of the studies was generally low. A total of 4883 patients with a simple anal fistula underwent a sphincter-cutting procedure, mainly fistulotomy, with a weighted average healing rate of 93.7%, while any postoperative continence impairment was reported in 12.7% of patients. Sphincter-sparing techniques were adopted to treat 602 patients affected by simple anal fistula, reaching a weighted average success rate of 77.7%, with no study reporting a significant postoperative incontinence rate. The postoperative onset of fecal incontinence and the recurrence of the disease reduced patients’ quality of life and satisfaction. Conclusions Surgical treatment of simple anal fistulas with sphincter-cutting procedures provides excellent cure rates, even if postoperative fecal incontinence is not a negligible risk. A sphincter-sparing procedure could be useful in selected patients.

scholarly journals DAMPAK PERUBAHAN GUNA LAHAN TERHADAP KEMAMPUAN RESAPAN AIR (KASUS: KOTA SAMARINDA)

2019 ◽  
Vol 15 (1) ◽  
pp. 70 ◽  
Author(s):  
Warsilan Warsilan
Keyword(s):  
Land Use ◽  
Catchment Area ◽  
Infrastructure Development ◽  
City Development ◽  
Water Catchment Area ◽  
East Kalimantan ◽  
City Culture ◽  
Water Catchment ◽  
The Impact

As the capital of the province of East Kalimantan, Samarinda City developments has a rapid progress from year to year. Samarinda City Development has a tendency oriented towards infrastructure development without regard to the existence of the quality of the existing environment. Imbalance of development in Samarinda city is to start decreasing the water catchment area, so its make increasing intensity of flood in the Samarinda City. The purpose of this study was to analyze the impact of changes in land use in the Samarinda city on the ability of the water catchment area. This research method using descriptive approach, the data collection system of primary and secondary. Intensity flood in the Samarinda city  is increasing from year to year, this condition happened as a problem that always occurs during the rainy season. Current development trends, always take an area that should be an infiltration  area for Samarinda City. Culture and inadequate infrastructure conditions such as lack of system of drainage and polder, was another factor causing the high intensity of flood  in Samarinda City. Therefore, the relevant regulations development guidelines for Samarinda  City must consider all aspects of planning, in this case especially the important of a balance of cultivated land and protected areas or zones.Keywords: Changes in land use; intensity of puddles; Samarinda

CHANGES IN THE TECHNICAL AND TECHNOLOGICAL LEVEL OF STEAM CULTIVATORS IN THE XXI CENTURY

2021 ◽  
Vol 2 (143) ◽  
pp. 174-183
Author(s):  
Andrey Yu. Nesmiyan ◽  
◽  
Anastasiya S. Kaymakova ◽  
Yuliya S. Tsench ◽  
Keyword(s):  
Weighted Average ◽  
Specific Weight ◽  
Research Purpose ◽  
Utilization Rate ◽  
Average Value ◽  
Technological Level ◽  
Short Test ◽  
Specific Material ◽  
The Cost

Most modern agricultural machines and tools consist of components, the main parameters, design features of which were justified in the first half of the twentieth century. Slowly and evolutionarily, these technical means are developing. (Research purpose) The research purpose is in identifying general trends in the technical and technological level of steam cultivators in the first quarter of the XXI century. (Materials and Methods) For the study there was analyzed the data of the short test reports of the selected machines. The production of steam cultivators in the Russian Federation is gradually increasing. (Results and discussion) For ten years of the beginning of the XXI century, only 27 machines were provided for testing, and from 2014 to 2017 – more than 40, while for "old" cultivators, the weighted average value of the tractor traction class was 2.8, for new ones it is about of four. For the study period (on average 10 years) the quality of soil cultivation in terms of such parameters as deviation from the specified depth of cultivation, crumbling and combing of the field surface has not changed much. The productivity of cultivator units increased by 7-21 percents, which is explained not only by an increase in the power of tractors, but also by an increase in the utilization rate of charge time on average from 0.72 to 0.77. The specific weight of the "new" cultivators was on average 22 kilogram-meters less than that of the "old" analogues, which can be explained by the evolution of their designs. (Conclusions) Increasing the class of tractors by one "level" the specific material consumption of the cultivators aggregated with them increases by about 58 kilogram-meters for both "old" and " new " cultivators. With an increase in the width of the tools from 4 to 16 meters, their weight will increase by 8 times, which affects the cost and operational and environmental characteristics of wide-reach cultivators.

Research in Different Categories of UK Universities

1997 ◽  
Vol 11 (5) ◽  
pp. 304-313
Author(s):  
W. O. George ◽  
A. N. Hill
Keyword(s):  
Weighted Average ◽  
Unit Group ◽  
Research Quality ◽  
Average Score ◽  
Social Sciences And Humanities ◽  
Peer Rating ◽  
Subject Areas ◽  
Broad Subject ◽  
The Impact

In this paper, the origins and characteristics of the 102 current UK universities are briefly traced and the outcomes of recent assessments of research quality are summarized for all universities and for the 69 subject units within which assessment was made. The quality of research in a subject unit, group of subject units or complete institution is measured by a weighted average score based on a peer rating of submitted subject units from each university and the numerical values obtained are described within the limitations of the methodology developed. The authors consider the scores in terms of the characteristics of each university and the broad subject areas, science, engineering, social sciences and humanities. They then discuss the industrial link with research in terms of recent government policy inputs, university research outcomes and the impact of market forces on universities from diminishing patterns of some income streams.

scholarly journals Aplikasi Pengambilan Keputusan dengan Metode Tsukamoto pada Penentuan Tingkat Kepuasan pelanggan

CAUCHY ◽  
2015 ◽  
Vol 4 (1) ◽  
pp. 10 ◽  
Author(s):  
Venny Riana Riana Agustin ◽  
Wahyu Henky Irawan
Keyword(s):  
Decision Making ◽  
Fuzzy Logic ◽  
Fuzzy Inference ◽  
Weighted Average ◽  
Fuzzy Rules ◽  
Quality Of Services ◽  
Inference System ◽  
A Value ◽  
Fuzzy Logic Analysis

Tsukamoto method is one method of fuzzy inference system on fuzzy logic for decision making. Steps of the decision making in this method, namely fuzzyfication (process changing the input into kabur), the establishment of fuzzy rules, fuzzy logic analysis, defuzzyfication (affirmation), as well as the conclusion and interpretation of the results. The results from this research are steps of the decision making in Tsukamoto method, namely fuzzyfication (process changing the input into kabur), the establishment of fuzzy rules by the general form IF a is A THEN B is B, fuzzy logic analysis to get alpha in every rule, defuzzyfication (affirmation) by weighted average method, as well as the conclusion and interpretation of the results. On customers at the case, in value of 16 the quality of services, the value of 17 the quality of goods, and value of 16 a price, a value of the results is 45,29063 and the level is low satisfaction

Sign in / Sign up

Export Citation Format

Share Document