MANAGEMENT CONSULTING. DEVELOPMENT PROSPECTS IN RUSSIA

2021 ◽  
Vol 1 (175) ◽  
pp. 104-110
Author(s):  
A.P. Samorukov ◽  
Keyword(s):  
Change Management ◽  
Business Processes ◽  
Management Strategies ◽  
Digital Technologies ◽  
Management Consulting ◽  
Conceptual Apparatus ◽  
Market Requirements ◽  
Theoretical Foundations ◽  
Development Prospects

Management consul ting is one of the fastest growing types of consulting in the structure of domestic services, since most enterprises are faced with the need to change management strategies, adapt to market requirements, as well as deeper implementation of digital technologies in the business processes of enterprises. This article reveals the theoretical foundations of management consulting, gives its classification, characterizes the conceptual apparatus and stages of the consulting process. The analysis and verification of the problems of the development of management consulting in Russia has been carried out. The practice is generalized and the assessment of the prospects for the development of management consulting in Russia is given.

scholarly journals Change Management Strategies to Implement A Fingerprint Based Attendance System in Information Systems Department Using ADKAR Model

2020 ◽  
Vol 3 (1) ◽  
pp. 22-29
Author(s):  
Endang Sulistiyani ◽  
Achmad Holil Noor Ali ◽  
Hanim Maria Astuti
Keyword(s):  
Information Systems ◽  
Change Management ◽  
Management Strategy ◽  
Business Processes ◽  
Gap Analysis ◽  
Management Strategies ◽  
Student Attendance ◽  
Technical Problems ◽  
Current Transition ◽  
States Of Change

Information Systems Department has used fingerprints as a student attendance system. But its implementation is briefly, because there are still technical and non-technical problems in the system. Unfortunately, at this time, the fingerprint is only left installed in each classroom and the manual attendance system is reused. It can be seen that the unsuccessful project management is caused by problems in changing from the manual system to the fingerprint system. Based on the ploblems, Information Systems Department of ITS requires change management strategies to implement this system. The planning of change management strategy is initiated by analyzing the gap between the business processes of manual attendance system and of the fingerprint-based attendance system. The goal of this gap analysis is to identify the changes and the impacts which then let to an identification to the solution. The solution will be an input for the development of change management strategy using the perspectives of Awareness, Desire, Knowledge, Ability, Reinforcement (ADKAR) model. The strategy is then mapped according to Prosci’s state of change. The result from this research is a change management roadmap of the fingerprint system’s implementation. This roadmap contains three states of change, which covering current, transition, and future.

Economic and psychological features of using digital technologies in business processes and personnel management

Ergodesign ◽  
2020 ◽  
Vol 2020 (1) ◽  
pp. 25-31
Author(s):  
Dmitriy Erokhin ◽  
Lydia Vestimaia ◽  
Oleg Trutnev
Keyword(s):  
Personnel Management ◽  
Business Processes ◽  
Digital Technologies ◽  
Internal Factors ◽  
Foreign Companies ◽  
E Learning ◽  
Psychological Features

Modern digital technologies that are used by domestic and foreign companies in personnel management and business processes are considered. Economic and psychological trends related to HR automation, HR Analytics, HR marketing, Smart recruitment and e-learning are highlighted. The results of digitalization of HR processes in leading domestic and foreign companies are presented, and the possibility of diagnosing changes in business processes under the influence of external and internal factors is justified.

How digital resources increase the safety culture in the enterprise

2020 ◽  
pp. 8-12
Author(s):  
Elena Soldatova
Keyword(s):  
Safety Culture ◽  
Business Processes ◽  
Digital Technologies ◽  
Industrial Safety ◽  
Labor Protection ◽  
Safety Skills ◽  
Digital Resources ◽  
And Training ◽  
General Director

Digital technologies are used not only to automate business processes and improve them, but are also increasingly applied in the field of labor protection. They are aimed at creating and training employees in various safety skills. Elena Soldatova, general director of OOO (LLC) Leader Info and founder of SOLDES company, tells about digitalization of business processes, what the level of industrial safety depends on, and how to improve the safety culture at the enterprise.

Prospects for Using Digital Technologies in Production Logistics

2021 ◽  
Vol 27 (9) ◽  
pp. 725-733
Author(s):  
A. A. Volkova ◽  
V. A. Plotnikov ◽  
Yu. A. Nikitin ◽  
N. I. Vasil’ev
Keyword(s):  
Business Processes ◽  
New Technologies ◽  
Systems Approach ◽  
Digital Technologies ◽  
Careful Consideration ◽  
Efficient Operation ◽  
Production Logistics ◽  
Logistics Systems ◽  
Life Cycle Theory ◽  
Additional Value

Aim. The presented study aims to examine the specific features as well as organizational and technical aspects of production logistics, taking into account its potential for using digital technologies.Tasks. The authors consider the essence, purpose, and goals of production logistics; analyze major logistics systems used in production logistics; assess the prospects for using digital technologies in this sphere.Methods. This study uses the methodology of strategic and logistics management, the systems approach, life cycle theory, general scientific methods of generalization, comparative, retrospective, and structural-functional analysis.Results. The production and logistics systems of a company are considered as equivalent elements in the context of managing material flows in internal and external supply chains and achieving the company’s operational and development goals. In this regard, production logistics is shown as part of both logistics and production, which affects its organization and architecture. Under modern conditions, an approach based on certain data is widely used in production logistics. It requires active introduction of digital technologies in production logistics, the purpose of which is not to achieve technical or organizational perfection of business processes, but to select technologies from the perspective of creating additional value.Conclusions. In the course of the study, three categories of activities associated with production logistics are identified. For each of these categories, the prospects and recommended classification of digital technologies are defined. Particular emphasis is placed on improving the quality and efficiency of data use. According to the authors, all information systems and digital technologies used in production logistics should be highly reliable. Thus, introduction of any new technologies in production logistics requires careful consideration. Regardless of the type of technology, a systems approach to the organization and development of production logistics is a prerequisite for the efficient operation of the company as a whole.

Integration of the concept of lean manufacturing and digital technologies of high-tech enterprises in modern conditions

2020 ◽  
pp. 105-113
Author(s):  
Н.С. Хорошавина ◽  
М.С. Абрашкин
Keyword(s):  
Lean Manufacturing ◽  
Process Management ◽  
Business Processes ◽  
Digital Technologies ◽  
Balance Of Power ◽  
Global Market ◽  
High Tech ◽  
Successful Implementation ◽  
Modern Business ◽  
Business Conditions

Цифровые технологии существенно влияют на мировой рынок, внося коррективы в расстановку сил на нем. Используемые ранее подходы к управлению бизнес-процессами становятся не актуальными в современных условиях. Без цифровизации наукоемкие производства будут не способны выдержать конкурентную борьбу, и вынуждены будут уйти с рынка. В то же время современные условия хозяйствования диктуют необходимость постоянного совершенствования бизнес-процессов наукоемких предприятий, их оптимизации. Данные принципы являются основой концепции бережливое производство, реализация которых становится более эффективной при условии использования цифровых технологий. В статье рассмотрены вопросы интеграции концепции бережливое производство и цифровых технологий на наукоемких предприятиях. Показан пример успешной реализации принципов данной концепции с использованием цифровых подходов к оптимизации бизнес-процессов наукоемкого производства. В современных условиях важнейшим активом любого предприятия, в том числе и наукоемкого производства, являются данные. Реализация принципов бережливого производства требует обработки значительного объема информации. Цифровые технологии позволяют анализировать информационные потоки в режиме реального времени, моделировать бизнес-процессы и тем самым, способствуют более качественному и оперативному принятию решений по оптимизации бизнес-процессов наукоемких производств. Только объединив принципы концепции бережливое производство и возможности, которые дает цифровизация, наукоемкие предприятия смогут не просто удержать свои конкурентные позиции на рынке, но и перейти на более качественный уровень своего развития. Digital technologies significantly affect the global market, making adjustments to the balance of power in it. Previously used approaches to business process management are no longer relevant in modern conditions. Without digitalization, high-tech industries will not be able to withstand competition and will be forced to leave the market. At the same time, modern business conditions dictate the need to constantly improve the business processes of high-tech enterprises and optimize them. These principles are the basis of the concept of lean manufacturing, the implementation of which becomes more effective when using digital technologies. The article deals with the integration of the concept of lean manufacturing and digital technologies in high-tech enterprises. An example of successful implementation of the principles of this concept using digital approaches to optimizing business processes in high-tech production is shown. In modern conditions, the most important asset of any.

PROBLEMS AND PRIORITY AREAS FOR APPLYING DIGITAL TECHNOLOGIES IN RUSSIAN AGRICULTURE

2020 ◽  
Vol 10 (7) ◽  
pp. 1390-1398
Author(s):  
M A. Bryzgalina ◽  
Keyword(s):  
Mobile Communications ◽  
Business Processes ◽  
Agricultural Sector ◽  
Digital Technologies ◽  
Digital Economy ◽  
Economic Activities ◽  
Agricultural Enterprises ◽  
Livestock Breeding ◽  
Rational Version ◽  
Definition Of

This paper discusses the implementation of digital technologies in the production sector and business processes of agricultural enterprises in Russia. Implementation of digitalization into the economic entities’ business activity is necessary in order not only to increase the speed of their functioning several times, but also to open up new, broader opportunities for their development in the future. Currently, in the Russian Federation, the main leaders in the development of digital technologies are, first of all, IT companies, as well as organizations operating in the field of media, finance and insurance. The level of digitalization in the real sector of the economy is significantly lower, while the agricultural sector is in last place for this indicator. This article reflects the prerequisites for the development of the digital economy in the world, which include the automation of production technologies and business processes, as well as penetration into the social sphere of the countries of the global Internet and mobile communications. The author considered a number of interpretations of the concept of “digital economy”, of which, in her opinion, the most rational version of the definition of the term under consideration was selected. Within the framework of the study, the prerequisites for the effective implementation of innovative technologies in the economic and social spheres of enterprises’ activities were determined, and the main factors and conditions for the developing digital system of a particular country were established. In the presented work, the author identified a number of modern key problems that significantly impede the introduction of digital technologies in the production and economic activities of economic entities of Russia, especially in the field of agriculture. At the same time, quite popular and widespread advanced technologies are indicated, which are currently being successfully implemented in promising agricultural organizations of the country. With regard to the branches of agriculture in Russia, namely crop and livestock breeding, the most expedient areas for the introduction of advanced digital technologies into the business processes of agricultural enterprises are presented.

Sign in / Sign up

Export Citation Format

Share Document