scholarly journals Penampilan Vegetatif Tiga Genotipe Kedelai Berbiji Besar Pada Kondisi Stres Genangan

2021 ◽  
pp. 309-319
Author(s):  
Kisman Kisman ◽  
Farid Hemon ◽  
Sumarjan Sumarjan ◽  
Suprayanti Dewi
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Weight Ratio ◽  
Dry Weight ◽  
Stress Conditions ◽  
Shoot Dry Weight ◽  
Main Plot ◽  
Number Of Leaves ◽  
Vegetative Characters ◽  
Plot Design

ABSTRACTThis study aims to determine the vegetative appearance of three genotypes of large-seeded soybean under puddle stress. The Experimental method was used and the plastic buckets as the experimental units were arranged using a Split Plot Design. The main plot was the stress factor (S) consisting of normal conditions (S0) and puddle stress (S1), and the subplot was the genotype factor (G) consisting of G1 (KH1), G2 (Argomulyo), and G2 (Grobogan). Each genotype was repeated four times. The observed variables were plant height, number of leaves, leaf area, number of productive branches, specific leaf weight, root/shoot dry weight ratio. The results showed that there were significantly differences in the appearance of the vegetative characters of the three genotypes of large seeded soybean under puddle stress conditions, especially on plant height, leaf area, plant dry weight, and shoot dry weight. Under puddle stress conditions, KH1 showed the highest of the plant height, root dry weight, and shoot dry weight. Argomulyo showed the highest of the leaf area, while Grobogan did not show as a tolerant variety under puddle stress conditions. 

scholarly journals EFEKTIFITAS FUNGI MIKORIZA ARBUSKULA (FMA) SERTA PUPUK NITROGEN DAN FOSFAT TERHADAP PERTUMBUHAN SEMAI JABON (Anthocephallus cadamba Roxb.) Effectiveness of Arbuscula Mycorrhizal Fungi (AMF) Nitrogen and Phosphate Fertilizer toward Jabon ........

2017 ◽  
Vol 8 (1) ◽  
pp. 20-25
Author(s):  
Fransisca Yosina Regina Luturmas ◽  
Sri Wilarso Budi R. ◽  
Irdika Mansur
Keyword(s):  
Plant Height ◽  
Mycorrhizal Fungi ◽  
Dry Weight ◽  
Phosphate Fertilizer ◽  
Soil Types ◽  
Shoot Dry Weight ◽  
Main Plot ◽  
Fast Growing Species ◽  
Glomus Sp ◽  
Plot Design

Jabon (Anthocephallus cadamba Roxb.) is one of fast-growing species with high economical value, and well adapted on some of soil types. The aims of this research were to analyze the effectiveness of AMF species isolated from Samama (Anthocephallus macrophyllus (Roxb.) Havil) and to determine the favorable dose of nitrogen and phosphate fertilizer for Jabon growth. The research was conducted CRD-split plot design main plot was Acaulospora sp.1 (M1), Glomus sp.1 (M2), Acaulospora sp.2 (M3), Acaulospora sp.3 (M4), Glomus sp.2 (M5). While the fertilizer as the sub-plot, consist of control (P0), urea 0.5g+rockphosphat 2g (P1), urea 1g+rockphosphat 4g (P2). The result showed that AMF and fertilizer applications effectively improved Jabon grown, especially in height, stem diameter, and shoot dry weight. The interaction (M4P1) increased plant height 154.73%, diameter 75.38% and shoot dry weight 376.09% compared with control. P1 treatment was better for growth of Jabon that was inoculated by mycorrhiza. Acaulospora sp.1 (M1) originally from Samama without fertilizer had the best effectiveness for Jabon growth.Key words: Acaulospora, indigenous

scholarly journals Effect of water hyacinth compost on the morpho-physiological parameters of Soybean (Glycine max l.)

2021 ◽  
Vol 2 (1) ◽  
pp. 084-095
Author(s):  
Ogbuehi HC ◽  
Ibe PK
Keyword(s):  
Glycine Max ◽  
Leaf Area ◽  
Plant Height ◽  
Water Hyacinth ◽  
Seed Weight ◽  
Dry Weight ◽  
Effect Of Water ◽  
Shoot Dry Weight ◽  
Glycine Max L ◽  
Number Of Leaves

A pot experiment was conducted under rainfed condition to study the effect of water hyacinth compost on the morpho-physiological parameters of soybean (Glycine max L.) at the Teaching and Research Farm of Faculty of Agriculture and Veterinary Medicine, Imo State University, Owerri. The treatments were control (T1) 100g (T2), 150g (T3) and 200g (T4) of water hyacinth compost and replicated four times. The treatments were arranged in Complete Randomized Design (CRD). The parameters measured were plant height, number of leaves, leaf area (cm2), leaf area index, relative growth rate (RGR), Net assimilation rate (NAR), shoot dry weight(g), yield and yield components (Number of pods, pods weight, 100 seed weight). The results obtained indicated that T3 significantly produced highest plant height (57.6cm) compare to control. While it was observed that T4 (200g) significantly produced the highest number of leaves (233.25), leaf area (631.80cm2), shoot dry weight (15.445g), number of pods (129.75), pod weights (25.38g) seed weight (7.23g) and yield (0.72kg/ha) relative to control and other treatment levels. Root parameters were also significantly improved by the rates of water hyacinth application compared to control. It will be worthy to note that there was no nodulation perhaps that was why the yield was poor. The results showed that soybean growth can effectively be improved with incorporation of water hyacinth into soil.

scholarly journals MODIFICAÇÕES NO MEIO DE CULTURA, FOTOPERÍODO E TEMPO DE CULTIVO AFETAM O ALONGAMENTO E ENRAIZAMENTO IN VITRO DE BANANEIRA CV. PACOVAN

Nativa ◽  
2018 ◽  
Vol 6 (1) ◽  
pp. 27
Author(s):  
Marcos Vinícius Marques Pinheiro ◽  
Ana Cristina Portugal Pinto De Carvalho ◽  
Fabrina Bolzan Martins
Keyword(s):  
Plant Height ◽  
Culture Medium ◽  
Culture Media ◽  
Dry Weight ◽  
Salt Mixture ◽  
Musa Spp ◽  
Fresh Biomass ◽  
Shoot Dry Weight ◽  
Number Of Leaves

No intuito de elevar as taxas de sobrevivência durante a etapa de aclimatização e posterior plantio a campo, avaliou-se o enraizamento in vitro de bananeira cv. Pacovan, em diferentes concentrações de sais MS e de sacarose. Utilizou-se DIC, esquema fatorial (6x2x3), com seis meios de cultura [sendo três concentrações de nutrientes do meio MS (100%; 50% de macronutrientes; e 50% dos sais macro e micronutrientes), e duas concentrações de sacarose (1,5/3,0%)], dois fotoperíodos (12/16 h) e três tempos de cultivo (21, 28 ou 35 dias) e seis repetições/tratamento. Analisaram-se: altura da planta, número de folhas/planta, massas frescas e secas das partes aérea e radicular. Para altura da planta, massa fresca da parte aérea e radicular, o meio MS 50% dos sais + sacarose (1,5%) com fotoperíodo de 16 h e tempo de cultivo de 35 dias foi satisfatório. Para massa seca da parte aérea foi MS 50% de sais + sacarose (3%), e para massa seca da parte radicular, MS 100% + sacarose (3%) (em 12hs/28 dias e 16hs/21 dias). Para o alongamento/enraizamento in vitro da bananeira cv. Pacovan sugere-se MS 50% de sais (macro e micronutrientes), redução ou manutenção de sacarose (1,5 ou 3%) em 16h/35 dias de cultivo.Palavra-chave: Musa spp., propagação in vitro, sistema radicular. CHANGES IN CULTURE MEDIUM, PHOTOPERIOD AND TIME OF CULTIVATION AFFECT THE IN VITRO ELONGATION AND ROOTING OF BANANA CV. PACOVAN ABSTRACT:In order to achieve high rates of survival during the acclimatization and later planting in the field, was evaluated the in vitro of banana cv. Pacovan plants under different concentrations of sucrose and MS basal salt mixture. The experiment was assembled in a DIC, in 6x2x3, six different culture media [three different MS salt mixture concentrations (100%; 50% of macronutrients; and 50% of macro/micronutrients) and two sucrose concentrations (1.5/3%)], two photoperiods (12/16 hours) and three cultivation times (21, 28 or 35 days). Each treatment was composed by 6 replicates. Plant height, number of leaves/plant, fresh and dry weight of roots and shoots, were analyzed. Satisfactory results for plant height and shoot and root fresh biomass were observed in MS with macro/micronutrients (50%) + sucrose (3%), 16 hours/35 days. The highest values of shoot dry weight were observed in MS with macro/micronutrients (50%) + sucrose (3%); the highest root dry weight was achieved with MS 100% + sucrose (3%) (12hs/28 and 16hs/21 days). The suggested medium for the in vitro elongation and rooting stage of banana cv. Pacovan is the MS with 50% of salts (macro and micronutrients), reduction or maintenance of sucrose (1.5 or 3%) in 16h/35 days of cultivation.Keywords: Musa spp., in vitro propagation, root system. DOI:

scholarly journals PENGARUH KETERSEDIAAN AIR TERHADAP PERTUMBUHAN DAN PRODUKSI DUA KLON NILAM

2020 ◽  
Vol 10 (4) ◽  
pp. 159
Author(s):  
. EMMYZAR
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Water Availability ◽  
Oil Content ◽  
Dry Weight ◽  
Optimum Growth ◽  
Effect Of Water ◽  
Pogostemon Cablin ◽  
Growth Production ◽  
Number Of Leaves

<p>Tanaman nilam tumbuh dan berproduksi dengan baik pada daerah dengan curah hujan relatif tinggi dan merata sepanjang tahun. Tanaman dalam kondisi kekurangan air terus menerus akan mengalami strcs air dan berpengaruh terhadap proses fisiologis, menurunkan permukaan trans- pirasi, luas daun menurun, dan mempercepat dcfiidrasi protoplasma. Penelitian pengaruh ketersediaan air terhadap petumbuhan dan produksi 2 (dua) klon nilam dilakukan di rumah kaca Instalasi Penelitian Cimanggu, Balittro Bogor mulai bulan Nopember 1999 sampai dengan Mei 2000. Penelitian ini betujuan untuk mengetahui pengaruh ketersediaan air terhadap partumbuhan dan produksi dua klon nilam (klon Sidikalang dan klon Situak) sekaligus diamati pengaruhnya terhadap kadar dan kualitas minyak nilam (rendemen, warna dan kandungan patchouly alkohol). Percobaan dilakukan dalam polibag menggunakan tanah kering jenis latosol Cimanggu Bogor yang diaduk dengan pupuk kandang sapi (3:1) sebanyak 10 kg/polibag disusun menggunakan rancangan factorial (dua faktor) dalam rancangan acak lengkap (RAL), diulang 3 kali. Ukuran plot 8 polibag/ perlakuan. Faktor pertama : klon nilam terdiri dari 2 jenis (K) yaitu : Kl = klon Sidikalang dan K2 = klon Situak. Faktor kedua: tingkat ketersediaan air (A) 4 taraf yaitu Al = 25% kapasitas lapang, A2 = 50% kapasitas lapang, A3 = 75% kapasitas lapang, dan A4 = 100 % kapasitas lapang. Peubah yang diamati meliputi persentase tumbuh tunas, tinggi tanaman, luas daun, bobot daun basah dan bobot daun kering, kadar minyak digambarkan dari rendemen dan kualitas minyak (wana dan kandungan patchouly alkohol). Hasil penelitian menunjukkan bahwa untuk jumlah tunas tidak ada interaksi antara tingkat ketersediaan air dan klon yang diuji, tetapi untuk jumlah daun ada interaksi. Tingkat pemberian air 75% kapasitas lapang (KL) secara keseluruhan memberikan pertumbuhan optimum bagi kedua klon, kecuali untuk parameter jumlah daun. Pada klon Situak. tingkat pemberian air 100% KL yang memberikan jumlah daun terbanyak. Perlakuan ketersediaan air 100% KL pada klon Sidikalang memberikan bobot daun kering tetinggi dibanding perlakuan lainnya, sedang untuk klon Situak, ketersediaan air pada taraf 75% KL memberikan bobot daun kering tetinggi. Rendemen minyak klon Situak dengan tingkat ketersediaan air 25% KL tertinggi (4.0%) dengan wana minyak kuning muda tcrang, diikuti tingkat 50% KL (3.0%) dengan wana minyak kusam/kemh. Kandungan patchouly alkohol klon Situak rata-rata (30%) lebih baik daripada klon Sidikalang, diperoleh dari perlakuan ketersediaan air 25% KL. Dapat disimpulkan bahwa untuk memperoleh petumbuhan dan produksi yang tinggi, ketersediaan air dalam tanah diperlukan antara 75 - 100% KL. Namun, untuk mendapatkan kandungan patchouly alkohol tinggi ketersediaan air yang dibutuhkan lebih rendah yaitu 25 % - 50%) KL.</p><p>Kata kunci: Nilam, Pogostemon cablin, ketersediaan air, petumbuhan, produksi</p><p> </p><p><strong>ABSTRACT</strong></p><p><strong>The effect of water availability the growth and production of two patchouly clones </strong></p><p>Patchouly plant grows and produces very well in the area with high and everly rain fall through the year. Plants with continuous shortage of water would face water stress and affect physiologis process, transpiration surface, leaf area and protoplasmic dehydration. Several levels of water needs were tested in this experiment, which was carried out in a glass house of Cimanggu Installation, Indonesian Spice and Medicinal Crops Research Institute, Bogor, rom November 1999 to May 2000. The objective was to find out the effect of water availability on two clones of patchouly growth, production and oil content (rendement, colour and patchouly alcohol). The experiment was conducted in polybags using Cimanggu Latosol soil mixed with cow dung (3:1), 10 kg/polybag, arranged in a factorially completely random design with 3 replications. Plot size was 8 polybag/treatment. The first factor was two clones of patchouly : K, = Sidikalang and K2 = Situak. The second factor was 4 levels of water availability: 2J% (A,), 50% (A2). 75% (A,), and 100% (A,) ield capacity (FC). Variables observed were percentage of shoot growth, plant height, leaf area, fresh weight and dry weight, oil content (rendement, colour and patchouly alcohol). The result showed that there was no interaction between the two factors for number of shoots. Clone of Sidikalang had higher plant height than that of Situak. The water availability of 75% (FC) gave optimum growth for the two clones, except the number of leaves. For Situak the water avaibility of 100% (FC) gave the highest number of leaves. For Sidikalang the water availability of 100% gave the highest dry weight of leaves. Oil rendement for Situak with 25% FC was the highest (4.0) with bright yellow colour. The content of patchouly alcohol for Situak was higher than that of Sidikalang (30%). Therefore, it can be concluded that to obtain the optimum growth and the higest production it needed 75 - 100% (FC) water availability, while for high patchouly alcohol content, it needed buzer the water availability, i.e. 25-50% (FC).</p><p>Key words: Patchouli, Pogostemon cablin, water level, growth, production</p>

scholarly journals Salt Tolerance of Sego SupremeTM Plants

HortScience ◽  
2019 ◽  
Vol 54 (11) ◽  
pp. 2056-2062 ◽  
Author(s):  
Asmita Paudel ◽  
Ji Jhong Chen ◽  
Youping Sun ◽  
Yuxiang Wang ◽  
Richard Anderson
Keyword(s):  
Salt Tolerance ◽  
Leaf Area ◽  
Plant Height ◽  
Saline Solution ◽  
Dry Weight ◽  
Market Demand ◽  
Salt Damage ◽  
Shoot Dry Weight ◽  
Elevated Salinity ◽  
Foliar Damage

Sego SupremeTM is a designated plant breeding and introduction program at the Utah State University Botanical Center and the Center for Water Efficient Landscaping. This plant selection program introduces native and adapted plants to the arid West for aesthetic landscaping and water conservation. The plants are evaluated for characteristics such as color, flowering, ease of propagation, market demand, disease/pest resistance, and drought tolerance. However, salt tolerance has not been considered during the evaluation processes. Four Sego SupremeTM plants [Aquilegia barnebyi (oil shale columbine), Clematis fruticosa (Mongolian gold clematis), Epilobium septentrionale (northern willowherb), and Tetraneuris acaulis var. arizonica (Arizona four-nerve daisy)] were evaluated for salt tolerance in a greenhouse. Uniform plants were irrigated weekly with a nutrient solution at an electrical conductivity (EC) of 1.25 dS·m−1 as control or a saline solution at an EC of 2.5, 5.0, 7.5, or 10.0 dS·m−1 for 8 weeks. After 8 weeks of irrigation, A. barnebyi irrigated with saline solution at an EC of 5.0 dS·m−1 had slight foliar salt damage with an average visual score of 3.7 (0 = dead; 5 = excellent), and more than 50% of the plants were dead when irrigated with saline solutions at an EC of 7.5 and 10.0 dS·m−1. However, C. fruticosa, E. septentrionale, and T. acaulis had no or minimal foliar salt damage with visual scores of 4.2, 4.1, and 4.3, respectively, when irrigated with saline solution at an EC of 10.0 dS·m−1. As the salinity levels of treatment solutions increased, plant height, leaf area, and shoot dry weight of C. fruticosa and T. acaulis decreased linearly; plant height of A. barnebyi and E. septentrionale also declined linearly, but their leaf area and shoot dry weight decreased quadratically. Compared with the control, the shoot dry weights of A. barnebyi, C. fruticosa, E. septentrionale, and T. acaulis decreased by 71.3%, 56.3%, 69.7%, and 48.1%, respectively, when irrigated with saline solution at an EC of 10.0 dS·m−1. Aquilegia barnebyi and C. fruticosa did not bloom during the experiment at all treatments. Elevated salinity reduced the number of flowers in E. septentrionale and T. acaulis. Elevated salinity also reduced the number of shoots in all four species. Among the four species, sodium (Na+) and chloride (Cl–) concentration increased the most in A. barnebyi by 53 and 48 times, respectively, when irrigated with saline solution at an EC of 10.0 dS·m−1. In this study, C. fruticosa and T. acaulis had minimal foliar salt damage and less reduction in shoot dry weight, indicating that they are more tolerant to salinity. Epilobium septentrionale was moderately tolerant to saline solution irrigation with less foliar damage, although it had more reduction in shoot dry weight. On the other hand, A. barnebyi was the least tolerant with severe foliar damage, more reduction in shoot dry weight, and a greater concentration of Na+ and Cl–.

scholarly journals The Effectiveness Of Pre-Planting Seeds Bio-Matriconditioning And Application Of Fertilization With Leisa Technique On Growth Of Areca Nut Seedling (Areca Catechu L.)

2021 ◽  
Vol 2 (6) ◽  
pp. 2053-2060
Author(s):  
Gusti Ayu Kade Sutariati ◽  
Muhidin ◽  
Nini Mila Rahni ◽  
Gusti Ngurah Adi Wibawa ◽  
La Mudi
Keyword(s):  
Plant Height ◽  
Dry Weight ◽  
Stem Diameter ◽  
Raw Material ◽  
Inorganic Fertilizer ◽  
Areca Nut ◽  
Randomized Design ◽  
Main Plot ◽  
Wet Weight ◽  
Number Of Leaves

Areca nut is widely used as industrial raw material, both for health and cosmetics and as a source of renewable energy. This study aimed to examine the combination of seed bombatriconditioning and LEISA fertilization treatments that were effective in increasing the growth of areca nut seedlings. The research was carried out in the Wua-Wua Kendari Village, from March to July 2021. The study used a split-plot design with a completely randomized design (CRD). The main plot is seed biomatriconditioning treatment which consists of 3 treatments. While the subplots were fertilized with the LEISA technique which consisted of 6 treatments so that 18 treatment combinations were obtained with 3 replications. Observations were made on plant height, number of leaves, stem diameter, number of roots, wet weight and dry weight of shoot. Observational data were analyzed using analysis of variance, followed by the DMRT α0.05 if there was a significant effect. The results showed that seed biomatriconditioning treatment with rhizobacteria integrated with the LEISA technique was able to increase the growth of areca nut seedlings. The integration between L1R biomatriconditioning and the application of organic plus fertilizer + 100% inorganic fertilizer showed a better growth performance of areca nut on plant height, number of leaves, stem diameter, number of roots, wet weight and dry weight of betel nut which were significantly different with control and application 100% inorganic fertilizer, but not significantly different from organic plus fertilizer, organic plus fertilizer + 50% inorganic fertilizer and organic plus fertilizer + 25% inorganic fertilizer. As a conclusion, pre-planting seed treatment with L1R biomatriconditioning is very important to increase areca nut seed germination. To increase the growth of areca nut seedlings, further fertilization needs to be done with organic plus fertilizer or a combination of organic plus fertilizer + 25% inorganic fertilizer.

scholarly journals Growth Response and Yield of Three Shallot Varieties on The Various Mixed of UREA + ZA in Ultisol Soil

2021 ◽  
Vol 7 (2) ◽  
pp. 47-51
Author(s):  
Lily Marlina ◽  
Joko Purnomo ◽  
Hilda Susanti
Keyword(s):  
Plant Height ◽  
Interaction Effect ◽  
Growth Response ◽  
Growth And Yield ◽  
Affected Plant ◽  
Split Plot ◽  
Main Plot ◽  
Number Of Leaves ◽  
Four Levels ◽  
Plot Design

This study aimed to: (1) identify the interaction effect between varieties and mixed doses of urea + ZA on the growth and yield of shallots in Ultisol soil; (2) to identify the effect of each shallot varieties and the dosage mixture of urea + ZA which produce the highest yield in Ultisol soils. The research was conducted from April to June 2019 in Tungkaran Village, Martapura, with a split plot design. The main plot was shallot varieties (V) with three levels, namely Biru Lancor (v1), Bima Brebes (v2), and Super Philip (v3). Subplots were a mixture of urea + ZA (P) with four levels, namely 0 kg urea + 600 kg ZA (p1), 100 kg urea + ZA 400 kg (p2), 200 kg urea + 200 kg ZA (p3), and 300 urea kg + ZA 0 kg (p4). Each experiment was repeated three times. Therefore, there were 36 experimental units. Observation parameters included plant height, number of leaves per clump, number of bulbs per clump, fresh bulbs' weight per clump, and yield of stored dry bulbs. The results showed that the Bima Brebes variety (v2) had a significant effect on plant height, number of leaves, number of bulbs per clump, the weight of fresh bulbs per clump, and yield of stored dry bulbs. The mixture of 200 kg urea + 200 g ZA (p3) significantly affected plant height, number of leaves, number of tubers per clump, the weight of fresh tubers per clump, and yield of stored dry tubers.

scholarly journals Shallot Growth and Yields Based on Ammonium:Nitrate Ratio on Coastal Sandy Soil

2017 ◽  
Vol 2 (2) ◽  
pp. 064
Author(s):  
Wiji Safitri ◽  
Endang Sulistyaningsih ◽  
Benito Heru Purwanto ◽  
Stephen Harper
Keyword(s):  
Sandy Soil ◽  
Dry Weight ◽  
Growth And Yield ◽  
Row Spacing ◽  
Yield And Quality ◽  
Allium Cepa L ◽  
Main Plot ◽  
Number Of Leaves ◽  
Plot Design

Nitrogen was a key component for increasing yield and quality of vegetables like shallots. The growth and development of plants were influenced by nitrogen form. Common plants preferred nitrate for growth, but the enormity preference varies within plant species and other environmental factors. The purpose of this experiment was to study the effect of ammonium:nitrate ratio in sandy soil to growth and yield of shallot (Allium cepa L. Aggregatum group). The experiment had been conducted in August-October 2015 in the sandy land on Samas Beach, Bantul, Yogyakarta, Indonesia. The research was arranged in a Split-Plot design. The main plot was the source of nitrogen (NH4+; NO3-; NH4+: NO3- 1:1; NH4+: NO3- 1:2; and NH4+: NO3- 2:1) and the subplot was cultivars (Crok Kuning, Tiron, and Bima Brebes). Each subplot covered an area of 2.5 m² (2.5 m x 1 m) with three blocks as replications. Shallot bulbs were planted in sixth-row, spacing 20 cm between rows and 15 cm within rows. The dose was applied according to the recommendation of BPTP (urea 200 kg ha-1, ZA 250 kg ha-1, SP-36 150 kg ha-1, and KCl 150 kg ha-1) 144.5 kg N ha-1. Ammonium:nitrate ratio influenced shallot growth in sandy soil through number of leaves at maximum vegetative phase and its leaf area. The NH4+: NO3- 1:2 ratio gave the best result in dry weight of leaves following bulb dry weight than other ratio. Nevertheless, ammonium:nitrate ratio had no significant influence on bulb dry weight (ton ha-1).

scholarly journals Physiological performance of wheat seeds coated with micronutrients

2013 ◽  
Vol 35 (1) ◽  
pp. 28-34 ◽  
Author(s):  
Lizandro Ciciliano Tavares ◽  
Cassyo de Araújo Rufino ◽  
André Pich Brunes ◽  
Felipe Freire Friedrich ◽  
Antonio Carlos Souza Albuquerque Barros ◽  
...  
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Seed Yield ◽  
Dry Weight ◽  
Physiological Performance ◽  
Shoot Dry Weight ◽  
Physiological Quality ◽  
Net Assimilation ◽  
Wheat Seeds

The objective of this study was to evaluate the physiological performance of wheat seeds coated with micronutrients. The treatments were combinations of two products based on micronutrients, product "A": 780.0 g.L-1 of zinc and product "B": 182.4, 7.6 and 45.6 g.L-1 of zinc, boron and molybdenum, respectively, with five dosages of the products: 0, 1, 2, 3 and 4 mL. kg-1 seed, totaling 10 treatments with four replications. Physiological quality of the treated seed was evaluated from germination and vigor tests and the early plant growth from determinations of shoot dry weight, plant height and leaf area at 10, 20 and 30 days after emergence (DAE), as well as the rate of crop growth, relative and net assimilation. Seed yield and physiological quality were determined after harvest. It was concluded that coating wheat seeds with the product "A" , based on zinc and "B", consisting of zinc, boron and molybdenum, respectively, up to a dosage of 4 mL.kg-1 seed, did not adversely affect the physiological quality of the treated seeds or those produced. Both products tested resulted in increases in leaf area, plant height and shoot dry weight up to 30 DAE, as well as a higher seed yield.

scholarly journals Growth of tomato seedlings in substrates containing a nanocomposite hydrogel with calcium montmorillonite (NC-MMt)

2019 ◽  
Vol 37 (2) ◽  
pp. 199-203
Author(s):  
Raphael AC Melo ◽  
Marçal HA Jorge ◽  
Adriel Bortolin ◽  
Leonardo S Boiteux ◽  
Caue R Oliveira ◽  
...  
Keyword(s):  
Plant Height ◽  
Weight Ratio ◽  
Dry Weight ◽  
Pine Bark ◽  
Peat Moss ◽  
Water Retention Capacity ◽  
Nanocomposite Hydrogel ◽  
Tomato Seedlings ◽  
Root Dry Weight ◽  
Shoot Dry Weight

ABSTRACT The correct use of hydrogels in some situations can increase seedling survival rates, plant growth, and the water-retention capacity of the growing medium. A technique for the production of a nanocomposite hydrogel using calcium montmorillonite (NC-MMt) was recently developed. However, additional research is necessary in order to validate this innovative input, particularly for the production of vegetable crops seedlings. In this context, the main objective of the present study was to evaluate the growth and development of seedlings, tomato hybrid ‘BRS Nagai’, in substrates containing different amendments of hydrogel NC-MMt. The trial was conducted in a 3x3 factorial arranged in a complete randomized blocks design, with three replications. Three substrates (peat moss, pine bark, and coconut peat) corresponded to the first factor and three rates of the NC-MMt hydrogel (0%= R1, 1.5%= R2 and 2.0%= R3, on a w/w basis) corresponded to the second factor. Each plot was composed of 16 plants that were assessed after three weeks. Overall, peat moss-based and pine bark-based substrates resulted in higher values for most of the analyzed traits: plant emergency percentage, plant height, stem diameter, leaf area, plant height/shoot dry weight ratio, root dry weight, shoot dry weight/root dry weight ratio and the Dickinson Quality Index. Rates of NC-MMt hydrogel displayed significant responses only to root superficial area and root volume. NC-MMt hydrogel amendment (mainly 1.5%) combined with specific substrates (mainly peat moss-based substrate) was able to improve the growth of ‘BRS Nagai’ tomato seedlings, with no observed toxic effects.

Sign in / Sign up

Export Citation Format

Share Document